staging: rtl8723bs: remove ternary operators in assignmet statments

Remove unnecessary ternary operators in assignments statments.

This patch is with the help of following Coccinelle script:

@@
expression a, b, c;
binary operator op = {==, !=, <=, >=, <, >, &&, ||};
@@

c =
- (a op b) ? true : false
+ a op b
Signed-off-by: NAastha Gupta <aastha.gupta4104@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8723bs/core/rtw_pwrctrl.c

@@ -1154,7 +1154,7 @@ void rtw_init_pwrctrl_priv(struct adapter *padapter)
 
 	pwrctrlpriv->LpsIdleCount = 0;
 	pwrctrlpriv->power_mgnt = padapter->registrypriv.power_mgnt;/*  PS_MODE_MIN; */
-	pwrctrlpriv->bLeisurePs = (PS_MODE_ACTIVE != pwrctrlpriv->power_mgnt)?true:false;
+	pwrctrlpriv->bLeisurePs = pwrctrlpriv->power_mgnt != PS_MODE_ACTIVE;
 
 	pwrctrlpriv->bFwCurrentInPSMode = false;
 
@@ -1325,7 +1325,8 @@ int rtw_pm_set_lps(struct adapter *padapter, u8 mode)
 				pwrctrlpriv->LpsIdleCount = 2;
 
 			pwrctrlpriv->power_mgnt = mode;
-			pwrctrlpriv->bLeisurePs = (PS_MODE_ACTIVE != pwrctrlpriv->power_mgnt)?true:false;
+			pwrctrlpriv->bLeisurePs =
+				pwrctrlpriv->power_mgnt != PS_MODE_ACTIVE;
 		}
 	} else
 		ret = -EINVAL;

drivers/staging/rtl8723bs/hal/hal_btcoex.c

@@ -463,7 +463,7 @@ static u8 halbtcoutsrc_Get(void *pBtcContext, u8 getType, void *pOutBuf)
 		break;
 
 	case BTC_GET_BL_WIFI_UNDER_5G:
-		*pu8 = (pHalData->CurrentBandType == 1) ? true : false;
+		*pu8 = pHalData->CurrentBandType == 1;
 		break;
 
 	case BTC_GET_BL_WIFI_AP_MODE_ENABLE:
@@ -1416,10 +1416,7 @@ u8 hal_btcoex_Initialize(struct adapter *padapter)
 
 
 	memset(&GLBtCoexist, 0, sizeof(GLBtCoexist));
-	ret1 = EXhalbtcoutsrc_InitlizeVariables((void *)padapter);
-	ret2 = (ret1 == true) ? true : false;
-
-	return ret2;
+	return EXhalbtcoutsrc_InitlizeVariables((void *)padapter);
 }
 
 void hal_btcoex_PowerOnSetting(struct adapter *padapter)

drivers/staging/rtl8723bs/hal/hal_com.c

@@ -1623,7 +1623,7 @@ void rtw_get_raw_rssi_info(void *sel, struct adapter *padapter)
 		psample_pkt_rssi->pwdball, psample_pkt_rssi->pwr_all
 	);
 
-	isCCKrate = (psample_pkt_rssi->data_rate <= DESC_RATE11M) ? true : false;
+	isCCKrate = psample_pkt_rssi->data_rate <= DESC_RATE11M;
 
 	if (isCCKrate)
 		psample_pkt_rssi->mimo_singal_strength[0] = psample_pkt_rssi->pwdball;
@@ -1656,7 +1656,7 @@ void rtw_dump_raw_rssi_info(struct adapter *padapter)
 	DBG_871X("RxRate = %s, PWDBALL = %d(%%), rx_pwr_all = %d(dBm)\n",
 			HDATA_RATE(psample_pkt_rssi->data_rate), psample_pkt_rssi->pwdball, psample_pkt_rssi->pwr_all);
 
-	isCCKrate = (psample_pkt_rssi->data_rate <= DESC_RATE11M) ? true : false;
+	isCCKrate = psample_pkt_rssi->data_rate <= DESC_RATE11M;
 
 	if (isCCKrate)
 		psample_pkt_rssi->mimo_singal_strength[0] = psample_pkt_rssi->pwdball;
@@ -1684,7 +1684,7 @@ void rtw_store_phy_info(struct adapter *padapter, union recv_frame *prframe)
 	struct rx_raw_rssi *psample_pkt_rssi = &padapter->recvpriv.raw_rssi_info;
 
 	psample_pkt_rssi->data_rate = pattrib->data_rate;
-	isCCKrate = (pattrib->data_rate <= DESC_RATE11M) ? true : false;
+	isCCKrate = pattrib->data_rate <= DESC_RATE11M;
 
 	psample_pkt_rssi->pwdball = pPhyInfo->RxPWDBAll;
 	psample_pkt_rssi->pwr_all = pPhyInfo->RecvSignalPower;

drivers/staging/rtl8723bs/hal/odm_CfoTracking.c

@@ -23,7 +23,7 @@ static void odm_SetCrystalCap(void *pDM_VOID, u8 CrystalCap)
 	struct adapter *Adapter = pDM_Odm->Adapter;
 	struct hal_com_data *pHalData = GET_HAL_DATA(Adapter);
 
-	bEEPROMCheck = (pHalData->EEPROMVersion >= 0x01) ? true : false;
+	bEEPROMCheck = pHalData->EEPROMVersion >= 0x01;
 
 	if (pCfoTrack->CrystalCap == CrystalCap)
 		return;

drivers/staging/rtl8723bs/hal/odm_HWConfig.c

@@ -106,7 +106,7 @@ static void odm_RxPhyStatus92CSeries_Parsing(
 	u8 LNA_idx, VGA_idx;
 	PPHY_STATUS_RPT_8192CD_T pPhyStaRpt = (PPHY_STATUS_RPT_8192CD_T)pPhyStatus;
 
-	isCCKrate = (pPktinfo->DataRate <= DESC_RATE11M) ? true : false;
+	isCCKrate = pPktinfo->DataRate <= DESC_RATE11M;
 	pPhyInfo->RxMIMOSignalQuality[ODM_RF_PATH_A] = -1;
 	pPhyInfo->RxMIMOSignalQuality[ODM_RF_PATH_B] = -1;
 

drivers/staging/rtl8723bs/hal/sdio_halinit.c

@@ -1020,7 +1020,7 @@ static u32 rtl8723bs_hal_init(struct adapter *padapter)
 			rtw_btcoex_IQKNotify(padapter, true);
 
 			restore_iqk_rst = (pwrpriv->bips_processing == true) ? true : false;
-			b2Ant = pHalData->EEPROMBluetoothAntNum == Ant_x2 ? true : false;
+			b2Ant = pHalData->EEPROMBluetoothAntNum == Ant_x2;
 			PHY_IQCalibrate_8723B(padapter, false, restore_iqk_rst, b2Ant, pHalData->ant_path);
 			pHalData->odmpriv.RFCalibrateInfo.bIQKInitialized = true;