提交 9554d57e 编写于 作者: M Mauro Carvalho Chehab

Revert "[media] staging: media: go7007: Adlink MPG24 board issues"

This patch were applied by mistake, as it were rejected by Don, who
requested it to be broken into per-change patches.

This reverts commit 0982db20.

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Volokh Konstantin <volokh84@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 97384897
......@@ -5,24 +5,6 @@ Todo:
and added to the build.
- testing?
- handle churn in v4l layer.
- Some features for wis-tw2804 subdev control (comb filter,motion detector sensitive & mask,more over...)
- go7007-v4l2.c need rewrite with new v4l2 style without nonstandart IO controls (set detector & bitrate)
05/05/2012 3.4.0-rc+:
Changes:
- When go7007 reset device, i2c was not worked (need rewrite GPIO5)
- As wis2804 has i2c_addr=0x00/*really*/, so Need set I2C_CLIENT_TEN flag for validity
- Some main nonzero initialization, rewrites with kzalloc instead kmalloc
- STATUS_SHUTDOWN was placed in incorrect place, so if firmware wasn`t loaded, we
failed v4l2_device_unregister with kernel panic (OOPS)
- Some new v4l2 style features as call_all(...s_stream...) for using subdev calls
- wis-tw2804.ko module code was incompatible with 3.4.x branch in initialization v4l2_subdev parts.
now i2c_get_clientdata(...) contains v4l2_subdev struct instead non standart wis_tw2804 struct
Adds:
- Additional chipset wis2804 controls with: gain,auto gain,inputs[0,1],color kill,chroma gain,gain balances,
for all 4 channels (from tw2804.pdf)
- Power control for each 4 ADC up when s_stream(...,1), down otherwise in wis-tw2804 module
Please send patchs to Greg Kroah-Hartman <greg@kroah.com> and Cc: Ross
Cohen <rcohen@snurgle.org> as well.
......
......@@ -173,11 +173,6 @@ static int go7007_init_encoder(struct go7007 *go)
go7007_write_addr(go, 0x3c82, 0x0001);
go7007_write_addr(go, 0x3c80, 0x00fe);
}
if (go->board_id == GO7007_BOARDID_ADLINK_MPG24) {
/* set GPIO5 to be an output, currently low */
go7007_write_addr(go, 0x3c82, 0x0000);
go7007_write_addr(go, 0x3c80, 0x00df);
}
return 0;
}
......@@ -197,23 +192,17 @@ int go7007_reset_encoder(struct go7007 *go)
/*
* Attempt to instantiate an I2C client by ID, probably loading a module.
*/
static int init_i2c_module(struct i2c_adapter *adapter, const struct go_i2c *const i2c)
static int init_i2c_module(struct i2c_adapter *adapter, const char *type,
int addr)
{
struct go7007 *go = i2c_get_adapdata(adapter);
struct v4l2_device *v4l2_dev = &go->v4l2_dev;
struct i2c_board_info info;
memset(&info, 0, sizeof(info));
strlcpy(info.type, i2c->type, sizeof(info.type));
info.addr = i2c->addr;
if (i2c->id == I2C_DRIVERID_WIS_TW2804)
info.flags |= I2C_CLIENT_TEN;
if (v4l2_i2c_new_subdev_board(v4l2_dev, adapter, &info, NULL))
if (v4l2_i2c_new_subdev(v4l2_dev, adapter, type, addr, NULL))
return 0;
printk(KERN_INFO "go7007: probing for module i2c:%s failed\n", i2c->type);
return -EINVAL;
printk(KERN_INFO "go7007: probing for module i2c:%s failed\n", type);
return -1;
}
/*
......@@ -249,7 +238,9 @@ int go7007_register_encoder(struct go7007 *go)
}
if (go->i2c_adapter_online) {
for (i = 0; i < go->board_info->num_i2c_devs; ++i)
init_i2c_module(&go->i2c_adapter, &go->board_info->i2c_devs[i]);
init_i2c_module(&go->i2c_adapter,
go->board_info->i2c_devs[i].type,
go->board_info->i2c_devs[i].addr);
if (go->board_id == GO7007_BOARDID_ADLINK_MPG24)
i2c_clients_command(&go->i2c_adapter,
DECODER_SET_CHANNEL, &go->channel_number);
......@@ -580,7 +571,7 @@ struct go7007 *go7007_alloc(struct go7007_board_info *board, struct device *dev)
struct go7007 *go;
int i;
go = kzalloc(sizeof(struct go7007), GFP_KERNEL);
go = kmalloc(sizeof(struct go7007), GFP_KERNEL);
if (go == NULL)
return NULL;
go->dev = dev;
......
......@@ -88,7 +88,7 @@ struct go7007_board_info {
int audio_bclk_div;
int audio_main_div;
int num_i2c_devs;
struct go_i2c {
struct {
const char *type;
int id;
int addr;
......
......@@ -1110,6 +1110,9 @@ static int go7007_usb_probe(struct usb_interface *intf,
} else {
u16 channel;
/* set GPIO5 to be an output, currently low */
go7007_write_addr(go, 0x3c82, 0x0000);
go7007_write_addr(go, 0x3c80, 0x00df);
/* read channel number from GPIO[1:0] */
go7007_read_addr(go, 0x3c81, &channel);
channel &= 0x3;
......@@ -1242,6 +1245,7 @@ static void go7007_usb_disconnect(struct usb_interface *intf)
struct urb *vurb, *aurb;
int i;
go->status = STATUS_SHUTDOWN;
usb_kill_urb(usb->intr_urb);
/* Free USB-related structs */
......@@ -1265,7 +1269,6 @@ static void go7007_usb_disconnect(struct usb_interface *intf)
kfree(go->hpi_context);
go7007_remove(go);
go->status = STATUS_SHUTDOWN;
}
static struct usb_driver go7007_usb_driver = {
......
......@@ -98,7 +98,7 @@ static int go7007_open(struct file *file)
if (go->status != STATUS_ONLINE)
return -EBUSY;
gofh = kzalloc(sizeof(struct go7007_file), GFP_KERNEL);
gofh = kmalloc(sizeof(struct go7007_file), GFP_KERNEL);
if (gofh == NULL)
return -ENOMEM;
++go->ref_count;
......@@ -953,7 +953,6 @@ static int vidioc_streamon(struct file *file, void *priv,
}
mutex_unlock(&go->hw_lock);
mutex_unlock(&gofh->lock);
call_all(&go->v4l2_dev, video, s_stream, 1);
return retval;
}
......@@ -969,7 +968,6 @@ static int vidioc_streamoff(struct file *file, void *priv,
mutex_lock(&gofh->lock);
go7007_streamoff(go);
mutex_unlock(&gofh->lock);
call_all(&go->v4l2_dev, video, s_stream, 0);
return 0;
}
......@@ -1834,6 +1832,5 @@ void go7007_v4l2_remove(struct go7007 *go)
mutex_unlock(&go->hw_lock);
if (go->video_dev)
video_unregister_device(go->video_dev);
if (go->status != STATUS_SHUTDOWN)
v4l2_device_unregister(&go->v4l2_dev);
v4l2_device_unregister(&go->v4l2_dev);
}
......@@ -21,27 +21,16 @@
#include <linux/videodev2.h>
#include <linux/ioctl.h>
#include <linux/slab.h>
#include <media/v4l2-subdev.h>
#include <media/v4l2-device.h>
#include "wis-i2c.h"
struct wis_tw2804 {
struct v4l2_subdev sd;
u8 channel:2;
u8 input:1;
u8 update:1;
u8 auto_gain:1;
u8 ckil:1;
int channel;
int norm;
u8 brightness;
u8 contrast;
u8 saturation;
u8 hue;
u8 gain;
u8 cr_gain;
u8 r_balance;
u8 b_balance;
int brightness;
int contrast;
int saturation;
int hue;
};
static u8 global_registers[] = {
......@@ -52,7 +41,6 @@ static u8 global_registers[] = {
0x3d, 0x80,
0x3e, 0x82,
0x3f, 0x82,
0x78, 0x0f,
0xff, 0xff, /* Terminator (reg 0xff does not exist) */
};
......@@ -115,358 +103,29 @@ static u8 channel_registers[] = {
0xff, 0xff, /* Terminator (reg 0xff does not exist) */
};
static s32 write_reg(struct i2c_client *client, u8 reg, u8 value, u8 channel)
static int write_reg(struct i2c_client *client, u8 reg, u8 value, int channel)
{
return i2c_smbus_write_byte_data(client, reg | (channel << 6), value);
}
static int write_regs(struct i2c_client *client, u8 *regs, u8 channel)
static int write_regs(struct i2c_client *client, u8 *regs, int channel)
{
int i;
for (i = 0; regs[i] != 0xff; i += 2)
if (i2c_smbus_write_byte_data(client,
regs[i] | (channel << 6), regs[i + 1]) < 0)
return -EINVAL;
return -1;
return 0;
}
static s32 read_reg(struct i2c_client *client, u8 reg, u8 channel)
{
return i2c_smbus_read_byte_data(client, (reg) | (channel << 6));
}
static inline struct wis_tw2804 *to_state(struct v4l2_subdev *sd)
{
return container_of(sd, struct wis_tw2804, sd);
}
static int tw2804_log_status(struct v4l2_subdev *sd)
{
struct wis_tw2804 *state = to_state(sd);
v4l2_info(sd, "Standard: %s\n", state->norm == V4L2_STD_NTSC ? "NTSC" :
state->norm == V4L2_STD_PAL ? "PAL" : "unknown");
v4l2_info(sd, "Channel: %d\n", state->channel);
v4l2_info(sd, "Input: %d\n", state->input);
v4l2_info(sd, "Brightness: %d\n", state->brightness);
v4l2_info(sd, "Contrast: %d\n", state->contrast);
v4l2_info(sd, "Saturation: %d\n", state->saturation);
v4l2_info(sd, "Hue: %d\n", state->hue);
return 0;
}
static int tw2804_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *query)
{
static const u32 user_ctrls[] = {
V4L2_CID_USER_CLASS,
V4L2_CID_BRIGHTNESS,
V4L2_CID_CONTRAST,
V4L2_CID_SATURATION,
V4L2_CID_HUE,
V4L2_CID_AUTOGAIN,
V4L2_CID_COLOR_KILLER,
V4L2_CID_GAIN,
V4L2_CID_CHROMA_GAIN,
V4L2_CID_BLUE_BALANCE,
V4L2_CID_RED_BALANCE,
0
};
static const u32 *ctrl_classes[] = {
user_ctrls,
NULL
};
query->id = v4l2_ctrl_next(ctrl_classes, query->id);
switch (query->id) {
case V4L2_CID_USER_CLASS:
return v4l2_ctrl_query_fill(query, 0, 0, 0, 0);
case V4L2_CID_BRIGHTNESS:
return v4l2_ctrl_query_fill(query, 0, 255, 1, 128);
case V4L2_CID_CONTRAST:
return v4l2_ctrl_query_fill(query, 0, 255, 1, 128);
case V4L2_CID_SATURATION:
return v4l2_ctrl_query_fill(query, 0, 255, 1, 128);
case V4L2_CID_HUE:
return v4l2_ctrl_query_fill(query, 0, 255, 1, 128);
case V4L2_CID_AUTOGAIN:
return v4l2_ctrl_query_fill(query, 0, 1, 1, 0);
case V4L2_CID_COLOR_KILLER:
return v4l2_ctrl_query_fill(query, 0, 1, 1, 0);
case V4L2_CID_GAIN:
return v4l2_ctrl_query_fill(query, 0, 255, 1, 128);
case V4L2_CID_CHROMA_GAIN:
return v4l2_ctrl_query_fill(query, 0, 255, 1, 128);
case V4L2_CID_BLUE_BALANCE:
return v4l2_ctrl_query_fill(query, 0, 255, 1, 122);
case V4L2_CID_RED_BALANCE:
return v4l2_ctrl_query_fill(query, 0, 255, 1, 122);
default:
return -EINVAL;
}
}
s32 get_ctrl_addr(int ctrl)
{
switch (ctrl) {
case V4L2_CID_BRIGHTNESS:
return 0x12;
case V4L2_CID_CONTRAST:
return 0x11;
case V4L2_CID_SATURATION:
return 0x10;
case V4L2_CID_HUE:
return 0x0f;
case V4L2_CID_AUTOGAIN:
return 0x02;
case V4L2_CID_COLOR_KILLER:
return 0x14;
case V4L2_CID_GAIN:
return 0x3c;
case V4L2_CID_CHROMA_GAIN:
return 0x3d;
case V4L2_CID_RED_BALANCE:
return 0x3f;
case V4L2_CID_BLUE_BALANCE:
return 0x3e;
default:
return -EINVAL;
}
}
static int tw2804_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
struct wis_tw2804 *state = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
s32 addr = get_ctrl_addr(ctrl->id);
s32 val = 0;
if (addr == -EINVAL)
return -EINVAL;
if (state->update) {
val = read_reg(client, addr, ctrl->id == V4L2_CID_GAIN ||
ctrl->id == V4L2_CID_CHROMA_GAIN ||
ctrl->id == V4L2_CID_RED_BALANCE ||
ctrl->id == V4L2_CID_BLUE_BALANCE ? 0 : state->channel);
if (val < 0)
return val;
}
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
if (state->update)
state->brightness = val;
ctrl->value = state->brightness;
break;
case V4L2_CID_CONTRAST:
if (state->update)
state->contrast = val;
ctrl->value = state->contrast;
break;
case V4L2_CID_SATURATION:
if (state->update)
state->saturation = val;
ctrl->value = state->saturation;
break;
case V4L2_CID_HUE:
if (state->update)
state->hue = val;
ctrl->value = state->hue;
break;
case V4L2_CID_AUTOGAIN:
if (state->update)
state->auto_gain = val & (1<<7) ? 1 : 0;
ctrl->value = state->auto_gain;
break;
case V4L2_CID_COLOR_KILLER:
if (state->update)
state->ckil = (val & 0x03) == 0x03 ? 1 : 0;
ctrl->value = state->ckil;
break;
case V4L2_CID_GAIN:
if (state->update)
state->gain = val;
ctrl->value = state->gain;
break;
case V4L2_CID_CHROMA_GAIN:
if (state->update)
state->cr_gain = val;
ctrl->value = state->cr_gain;
break;
case V4L2_CID_RED_BALANCE:
if (state->update)
state->r_balance = val;
ctrl->value = state->r_balance;
break;
case V4L2_CID_BLUE_BALANCE:
if (state->update)
state->b_balance = val;
ctrl->value = state->b_balance;
break;
default:
return -EINVAL;
}
state->update = 0;
return 0;
}
static int tw2804_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
struct wis_tw2804 *dec = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
s32 reg = 0;
s32 addr = get_ctrl_addr(ctrl->id);
if (addr == -EINVAL)
return -EINVAL;
switch (ctrl->id) {
case V4L2_CID_AUTOGAIN:
reg = read_reg(client, addr, dec->channel);
if (reg > 0) {
if (ctrl->value == 0)
ctrl->value = reg & ~(1<<7);
else
ctrl->value = reg | 1<<7;
} else
return reg;
break;
case V4L2_CID_COLOR_KILLER:
reg = read_reg(client, addr, dec->channel);
if (reg > 0)
ctrl->value = (reg & ~(0x03)) | (ctrl->value == 0 ? 0x02 : 0x03);
else
return reg;
break;
default:
break;
}
ctrl->value = ctrl->value > 255 ? 255 : (ctrl->value < 0 ? 0 : ctrl->value);
reg = write_reg(client, addr, (u8)ctrl->value, ctrl->id == V4L2_CID_GAIN ||
ctrl->id == V4L2_CID_CHROMA_GAIN ||
ctrl->id == V4L2_CID_RED_BALANCE ||
ctrl->id == V4L2_CID_BLUE_BALANCE ? 0 : dec->channel);
if (reg < 0) {
v4l2_err(&dec->sd, "Can`t set_ctrl value:id=%d;value=%d\n", ctrl->id, ctrl->value);
return reg;
}
dec->update = 1;
return tw2804_g_ctrl(sd, ctrl);
}
static int tw2804_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
{
struct wis_tw2804 *dec = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
u8 regs[] = {
0x01, norm&V4L2_STD_NTSC ? 0xc4 : 0x84,
0x09, norm&V4L2_STD_NTSC ? 0x07 : 0x04,
0x0a, norm&V4L2_STD_NTSC ? 0xf0 : 0x20,
0x0b, norm&V4L2_STD_NTSC ? 0x07 : 0x04,
0x0c, norm&V4L2_STD_NTSC ? 0xf0 : 0x20,
0x0d, norm&V4L2_STD_NTSC ? 0x40 : 0x4a,
0x16, norm&V4L2_STD_NTSC ? 0x00 : 0x40,
0x17, norm&V4L2_STD_NTSC ? 0x00 : 0x40,
0x20, norm&V4L2_STD_NTSC ? 0x07 : 0x0f,
0x21, norm&V4L2_STD_NTSC ? 0x07 : 0x0f,
0xff, 0xff,
};
write_regs(client, regs, dec->channel);
dec->norm = norm;
return 0;
}
static const struct v4l2_subdev_core_ops tw2804_core_ops = {
.log_status = tw2804_log_status,
.g_ctrl = tw2804_g_ctrl,
.s_ctrl = tw2804_s_ctrl,
.queryctrl = tw2804_queryctrl,
.s_std = tw2804_s_std,
};
static int tw2804_s_video_routing(struct v4l2_subdev *sd, u32 input, u32 output,
u32 config)
{
struct wis_tw2804 *dec = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
s32 reg = 0;
if (0 > input || input > 1)
return -EINVAL;
if (input == dec->input && !dec->update)
return 0;
reg = read_reg(client, 0x22, dec->channel);
if (reg >= 0) {
if (input == 0)
reg &= ~(1<<2);
else
reg |= 1<<2;
reg = write_reg(client, 0x22, (u8)reg, dec->channel);
}
if (reg >= 0) {
dec->input = input;
dec->update = 0;
} else
return reg;
return 0;
}
static int tw2804_s_mbus_fmt(struct v4l2_subdev *sd,
struct v4l2_mbus_framefmt *fmt)
{
/*TODO need select between 3fmt:
* bt_656,
* bt_601_8bit,
* bt_656_dual,
*/
return 0;
}
int tw2804_s_stream(struct v4l2_subdev *sd, int enable)
{
struct wis_tw2804 *dec = to_state(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
u32 reg = read_reg(client, 0x78, 0);
if (enable == 1)
write_reg(client, 0x78, reg & ~(1<<dec->channel), 0);
else
write_reg(client, 0x78, reg | (1<<dec->channel), 0);
return 0;
}
static const struct v4l2_subdev_video_ops tw2804_video_ops = {
.s_routing = tw2804_s_video_routing,
.s_mbus_fmt = tw2804_s_mbus_fmt,
.s_stream = tw2804_s_stream,
};
static const struct v4l2_subdev_ops tw2804_ops = {
.core = &tw2804_core_ops,
.video = &tw2804_video_ops,
};
static int wis_tw2804_command(struct i2c_client *client,
unsigned int cmd, void *arg)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct wis_tw2804 *dec = to_state(sd);
int *input;
struct wis_tw2804 *dec = i2c_get_clientdata(client);
if (cmd == DECODER_SET_CHANNEL) {
input = arg;
int *input = arg;
if (*input < 0 || *input > 3) {
printk(KERN_ERR "wis-tw2804: channel %d is not "
......@@ -495,6 +154,139 @@ static int wis_tw2804_command(struct i2c_client *client,
"channel number is set\n", cmd);
return 0;
}
switch (cmd) {
case VIDIOC_S_STD:
{
v4l2_std_id *input = arg;
u8 regs[] = {
0x01, *input & V4L2_STD_NTSC ? 0xc4 : 0x84,
0x09, *input & V4L2_STD_NTSC ? 0x07 : 0x04,
0x0a, *input & V4L2_STD_NTSC ? 0xf0 : 0x20,
0x0b, *input & V4L2_STD_NTSC ? 0x07 : 0x04,
0x0c, *input & V4L2_STD_NTSC ? 0xf0 : 0x20,
0x0d, *input & V4L2_STD_NTSC ? 0x40 : 0x4a,
0x16, *input & V4L2_STD_NTSC ? 0x00 : 0x40,
0x17, *input & V4L2_STD_NTSC ? 0x00 : 0x40,
0x20, *input & V4L2_STD_NTSC ? 0x07 : 0x0f,
0x21, *input & V4L2_STD_NTSC ? 0x07 : 0x0f,
0xff, 0xff,
};
write_regs(client, regs, dec->channel);
dec->norm = *input;
break;
}
case VIDIOC_QUERYCTRL:
{
struct v4l2_queryctrl *ctrl = arg;
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
ctrl->type = V4L2_CTRL_TYPE_INTEGER;
strncpy(ctrl->name, "Brightness", sizeof(ctrl->name));
ctrl->minimum = 0;
ctrl->maximum = 255;
ctrl->step = 1;
ctrl->default_value = 128;
ctrl->flags = 0;
break;
case V4L2_CID_CONTRAST:
ctrl->type = V4L2_CTRL_TYPE_INTEGER;
strncpy(ctrl->name, "Contrast", sizeof(ctrl->name));
ctrl->minimum = 0;
ctrl->maximum = 255;
ctrl->step = 1;
ctrl->default_value = 128;
ctrl->flags = 0;
break;
case V4L2_CID_SATURATION:
ctrl->type = V4L2_CTRL_TYPE_INTEGER;
strncpy(ctrl->name, "Saturation", sizeof(ctrl->name));
ctrl->minimum = 0;
ctrl->maximum = 255;
ctrl->step = 1;
ctrl->default_value = 128;
ctrl->flags = 0;
break;
case V4L2_CID_HUE:
ctrl->type = V4L2_CTRL_TYPE_INTEGER;
strncpy(ctrl->name, "Hue", sizeof(ctrl->name));
ctrl->minimum = 0;
ctrl->maximum = 255;
ctrl->step = 1;
ctrl->default_value = 128;
ctrl->flags = 0;
break;
}
break;
}
case VIDIOC_S_CTRL:
{
struct v4l2_control *ctrl = arg;
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
if (ctrl->value > 255)
dec->brightness = 255;
else if (ctrl->value < 0)
dec->brightness = 0;
else
dec->brightness = ctrl->value;
write_reg(client, 0x12, dec->brightness, dec->channel);
break;
case V4L2_CID_CONTRAST:
if (ctrl->value > 255)
dec->contrast = 255;
else if (ctrl->value < 0)
dec->contrast = 0;
else
dec->contrast = ctrl->value;
write_reg(client, 0x11, dec->contrast, dec->channel);
break;
case V4L2_CID_SATURATION:
if (ctrl->value > 255)
dec->saturation = 255;
else if (ctrl->value < 0)
dec->saturation = 0;
else
dec->saturation = ctrl->value;
write_reg(client, 0x10, dec->saturation, dec->channel);
break;
case V4L2_CID_HUE:
if (ctrl->value > 255)
dec->hue = 255;
else if (ctrl->value < 0)
dec->hue = 0;
else
dec->hue = ctrl->value;
write_reg(client, 0x0f, dec->hue, dec->channel);
break;
}
break;
}
case VIDIOC_G_CTRL:
{
struct v4l2_control *ctrl = arg;
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
ctrl->value = dec->brightness;
break;
case V4L2_CID_CONTRAST:
ctrl->value = dec->contrast;
break;
case V4L2_CID_SATURATION:
ctrl->value = dec->saturation;
break;
case V4L2_CID_HUE:
ctrl->value = dec->hue;
break;
}
break;
}
default:
break;
}
return 0;
}
......@@ -503,28 +295,21 @@ static int wis_tw2804_probe(struct i2c_client *client,
{
struct i2c_adapter *adapter = client->adapter;
struct wis_tw2804 *dec;
struct v4l2_subdev *sd;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
dec = kzalloc(sizeof(struct wis_tw2804), GFP_KERNEL);
dec = kmalloc(sizeof(struct wis_tw2804), GFP_KERNEL);
if (dec == NULL)
return -ENOMEM;
sd = &dec->sd;
dec->update = 1;
dec->channel = -1;
dec->norm = V4L2_STD_NTSC;
dec->brightness = 128;
dec->contrast = 128;
dec->saturation = 128;
dec->hue = 128;
dec->gain = 128;
dec->cr_gain = 128;
dec->b_balance = 122;
dec->r_balance = 122;
v4l2_i2c_subdev_init(sd, client, &tw2804_ops);
i2c_set_clientdata(client, dec);
printk(KERN_DEBUG "wis-tw2804: creating TW2804 at address %d on %s\n",
client->addr, adapter->name);
......@@ -534,10 +319,9 @@ static int wis_tw2804_probe(struct i2c_client *client,
static int wis_tw2804_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct wis_tw2804 *dec = i2c_get_clientdata(client);
v4l2_device_unregister_subdev(sd);
kfree(to_state(sd));
kfree(dec);
return 0;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册