提交 9539ce22 编写于 作者: L Linus Torvalds

Merge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  forcedeth: fix cpu irq mask
  chelsio parenthesis fix
  spidernet: skb used after netif_receive_skb
  meth driver renovation
  remove unnecessary dependency on VIA velocity config
  fix compiler warning in fixed.c
  asix.c - Add Belkin F5D5055 ids
  ucc_geth:trivial fix
  ucc_geth: Fix MODULE_DEVICE_TABLE() duplication
  [PATCH] drivers/net/wireless/libertas/rx.c: fix use-after-free
  [PATCH] drivers/net/wireless/libertas/fw.c: fix use-before-check
  [PATCH] libertas: skb dereferenced after netif_rx
......@@ -3,5 +3,5 @@
# under Linux.
#
obj-y += ip32-berr.o ip32-irq.o ip32-setup.o ip32-reset.o \
obj-y += ip32-berr.o ip32-irq.o ip32-platform.o ip32-setup.o ip32-reset.o \
crime.o ip32-memory.o
#include <linux/init.h>
#include <linux/platform_device.h>
static __init int meth_devinit(void)
{
struct platform_device *pd;
int ret;
pd = platform_device_alloc("meth", -1);
if (!pd)
return -ENOMEM;
ret = platform_device_add(pd);
if (ret)
platform_device_put(pd);
return ret;
}
device_initcall(meth_devinit);
......@@ -2218,7 +2218,7 @@ config SK98LIN
config VIA_VELOCITY
tristate "VIA Velocity support"
depends on NET_PCI && PCI
depends on PCI
select CRC32
select CRC_CCITT
select MII
......
......@@ -105,7 +105,7 @@
#define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_LOW(filterId) (0x204A + mSUNI1x10GEXP_MAC_FILTER_OFFSET(filterId))
#define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_MID(filterId) (0x204B + mSUNI1x10GEXP_MAC_FILTER_OFFSET(filterId))
#define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_HIGH(filterId)(0x204C + mSUNI1x10GEXP_MAC_FILTER_OFFSET(filterId))
#define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID(filterId) (0x2062 + mSUNI1x10GEXP_MAC_VID_FILTER_OFFSET(filterId)
#define mSUNI1x10GEXP_REG_RXXG_EXACT_MATCH_VID(filterId) (0x2062 + mSUNI1x10GEXP_MAC_VID_FILTER_OFFSET(filterId))
#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_0_LOW 0x204A
#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_0_MID 0x204B
#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_0_HIGH 0x204C
......
......@@ -195,7 +195,7 @@ enum {
#define NVREG_IRQ_TX_FORCED 0x0100
#define NVREG_IRQ_RECOVER_ERROR 0x8000
#define NVREG_IRQMASK_THROUGHPUT 0x00df
#define NVREG_IRQMASK_CPU 0x0040
#define NVREG_IRQMASK_CPU 0x0060
#define NVREG_IRQ_TX_ALL (NVREG_IRQ_TX_ERR|NVREG_IRQ_TX_OK|NVREG_IRQ_TX_FORCED)
#define NVREG_IRQ_RX_ALL (NVREG_IRQ_RX_ERROR|NVREG_IRQ_RX|NVREG_IRQ_RX_NOBUF|NVREG_IRQ_RX_FORCED)
#define NVREG_IRQ_OTHER (NVREG_IRQ_TIMER|NVREG_IRQ_LINK|NVREG_IRQ_RECOVER_ERROR)
......
......@@ -8,15 +8,16 @@
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h> /* printk() */
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/errno.h> /* error codes */
#include <linux/types.h> /* size_t */
#include <linux/interrupt.h> /* mark_bh */
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/in.h>
#include <linux/in6.h>
......@@ -33,7 +34,6 @@
#include <asm/io.h>
#include <asm/scatterlist.h>
#include <linux/dma-mapping.h>
#include "meth.h"
......@@ -51,8 +51,6 @@
static const char *meth_str="SGI O2 Fast Ethernet";
MODULE_AUTHOR("Ilya Volynets <ilya@theIlya.com>");
MODULE_DESCRIPTION("SGI O2 Builtin Fast Ethernet driver");
#define HAVE_TX_TIMEOUT
/* The maximum time waited (in jiffies) before assuming a Tx failed. (400ms) */
......@@ -784,15 +782,15 @@ static struct net_device_stats *meth_stats(struct net_device *dev)
/*
* The init function.
*/
static struct net_device *meth_init(void)
static int __init meth_probe(struct platform_device *pdev)
{
struct net_device *dev;
struct meth_private *priv;
int ret;
int err;
dev = alloc_etherdev(sizeof(struct meth_private));
if (!dev)
return ERR_PTR(-ENOMEM);
return -ENOMEM;
dev->open = meth_open;
dev->stop = meth_release;
......@@ -808,11 +806,12 @@ static struct net_device *meth_init(void)
priv = netdev_priv(dev);
spin_lock_init(&priv->meth_lock);
SET_NETDEV_DEV(dev, &pdev->dev);
ret = register_netdev(dev);
if (ret) {
err = register_netdev(dev);
if (err) {
free_netdev(dev);
return ERR_PTR(ret);
return err;
}
printk(KERN_INFO "%s: SGI MACE Ethernet rev. %d\n",
......@@ -820,21 +819,44 @@ static struct net_device *meth_init(void)
return 0;
}
static struct net_device *meth_dev;
static int __exit meth_remove(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
unregister_netdev(dev);
free_netdev(dev);
platform_set_drvdata(pdev, NULL);
return 0;
}
static struct platform_driver meth_driver = {
.probe = meth_probe,
.remove = __devexit_p(meth_remove),
.driver = {
.name = "meth",
}
};
static int __init meth_init_module(void)
{
meth_dev = meth_init();
if (IS_ERR(meth_dev))
return PTR_ERR(meth_dev);
return 0;
int err;
err = platform_driver_register(&meth_driver);
if (err)
printk(KERN_ERR "Driver registration failed\n");
return err;
}
static void __exit meth_exit_module(void)
{
unregister_netdev(meth_dev);
free_netdev(meth_dev);
platform_driver_unregister(&meth_driver);
}
module_init(meth_init_module);
module_exit(meth_exit_module);
MODULE_AUTHOR("Ilya Volynets <ilya@theIlya.com>");
MODULE_DESCRIPTION("SGI O2 Builtin Fast Ethernet driver");
MODULE_LICENSE("GPL");
......@@ -89,6 +89,7 @@ EXPORT_SYMBOL(fixed_mdio_set_link_update);
/*-----------------------------------------------------------------------------
* This is used for updating internal mii regs from the status
*-----------------------------------------------------------------------------*/
#if defined(CONFIG_FIXED_MII_100_FDX) || defined(CONFIG_FIXED_MII_10_FDX)
static int fixed_mdio_update_regs(struct fixed_info *fixed)
{
u16 *regs = fixed->regs;
......@@ -165,6 +166,7 @@ static int fixed_mii_reset(struct mii_bus *bus)
/*nothing here - no way/need to reset it*/
return 0;
}
#endif
static int fixed_config_aneg(struct phy_device *phydev)
{
......@@ -194,6 +196,7 @@ static struct phy_driver fixed_mdio_driver = {
* number is used to create multiple fixed PHYs, so that several devices can
* utilize them simultaneously.
*-----------------------------------------------------------------------------*/
#if defined(CONFIG_FIXED_MII_100_FDX) || defined(CONFIG_FIXED_MII_10_FDX)
static int fixed_mdio_register_device(int number, int speed, int duplex)
{
struct mii_bus *new_bus;
......@@ -301,6 +304,7 @@ static int fixed_mdio_register_device(int number, int speed, int duplex)
return err;
}
#endif
MODULE_DESCRIPTION("Fixed PHY device & driver for PAL");
......
......@@ -1014,12 +1014,12 @@ spider_net_pass_skb_up(struct spider_net_descr *descr,
*/
}
/* pass skb up to stack */
netif_receive_skb(skb);
/* update netdevice statistics */
card->netdev_stats.rx_packets++;
card->netdev_stats.rx_bytes += skb->len;
/* pass skb up to stack */
netif_receive_skb(skb);
}
#ifdef DEBUG
......
......@@ -23,11 +23,8 @@
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/ethtool.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/fsl_devices.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/workqueue.h>
......
......@@ -260,8 +260,6 @@ static struct of_device_id uec_mdio_match[] = {
{},
};
MODULE_DEVICE_TABLE(of, uec_mdio_match);
static struct of_platform_driver uec_mdio_driver = {
.name = DRV_NAME,
.probe = uec_mdio_probe,
......
......@@ -1458,6 +1458,10 @@ static const struct usb_device_id products [] = {
// IO-DATA ETG-US2
USB_DEVICE (0x04bb, 0x0930),
.driver_info = (unsigned long) &ax88178_info,
}, {
// Belkin F5D5055
USB_DEVICE(0x050d, 0x5055),
.driver_info = (unsigned long) &ax88178_info,
},
{ }, // END
};
......
......@@ -46,7 +46,7 @@ u32 libertas_index_to_data_rate(u8 index);
u8 libertas_data_rate_to_index(u32 rate);
void libertas_get_fwversion(wlan_adapter * adapter, char *fwversion, int maxlen);
int libertas_upload_rx_packet(wlan_private * priv, struct sk_buff *skb);
void libertas_upload_rx_packet(wlan_private * priv, struct sk_buff *skb);
/** The proc fs interface */
int libertas_process_rx_command(wlan_private * priv);
......
......@@ -333,18 +333,22 @@ static void command_timer_fn(unsigned long data)
unsigned long flags;
ptempnode = adapter->cur_cmd;
if (ptempnode == NULL) {
lbs_pr_debug(1, "PTempnode Empty\n");
return;
}
cmd = (struct cmd_ds_command *)ptempnode->bufvirtualaddr;
if (!cmd) {
lbs_pr_debug(1, "cmd is NULL\n");
return;
}
lbs_pr_info("command_timer_fn fired (%x)\n", cmd->command);
if (!adapter->fw_ready)
return;
if (ptempnode == NULL) {
lbs_pr_debug(1, "PTempnode Empty\n");
return;
}
spin_lock_irqsave(&adapter->driver_lock, flags);
adapter->cur_cmd = NULL;
spin_unlock_irqrestore(&adapter->driver_lock, flags);
......
......@@ -136,7 +136,7 @@ static void wlan_compute_rssi(wlan_private * priv, struct rxpd *p_rx_pd)
LEAVE();
}
int libertas_upload_rx_packet(wlan_private * priv, struct sk_buff *skb)
void libertas_upload_rx_packet(wlan_private * priv, struct sk_buff *skb)
{
lbs_pr_debug(1, "skb->data=%p\n", skb->data);
......@@ -148,8 +148,6 @@ int libertas_upload_rx_packet(wlan_private * priv, struct sk_buff *skb)
skb->ip_summed = CHECKSUM_UNNECESSARY;
netif_rx(skb);
return 0;
}
/**
......@@ -269,15 +267,11 @@ int libertas_process_rxed_packet(wlan_private * priv, struct sk_buff *skb)
wlan_compute_rssi(priv, p_rx_pd);
lbs_pr_debug(1, "RX Data: size of actual packet = %d\n", skb->len);
if (libertas_upload_rx_packet(priv, skb)) {
lbs_pr_debug(1, "RX error: libertas_upload_rx_packet"
" returns failure\n");
ret = -1;
goto done;
}
priv->stats.rx_bytes += skb->len;
priv->stats.rx_packets++;
libertas_upload_rx_packet(priv, skb);
ret = 0;
done:
LEAVE();
......@@ -438,22 +432,14 @@ static int process_rxed_802_11_packet(wlan_private * priv, struct sk_buff *skb)
wlan_compute_rssi(priv, prxpd);
lbs_pr_debug(1, "RX Data: size of actual packet = %d\n", skb->len);
if (libertas_upload_rx_packet(priv, skb)) {
lbs_pr_debug(1, "RX error: libertas_upload_rx_packet "
"returns failure\n");
ret = -1;
goto done;
}
priv->stats.rx_bytes += skb->len;
priv->stats.rx_packets++;
libertas_upload_rx_packet(priv, skb);
ret = 0;
done:
LEAVE();
skb->protocol = __constant_htons(0x0019); /* ETH_P_80211_RAW */
return (ret);
}
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册