提交 952c5ca1 编写于 作者: A Andy Fleming 提交者: David S. Miller

fsl_pq_mdio: Clean up tbi address configuration

The code for setting the address of the internal TBI PHY was
convoluted enough without a maze of ifdefs. Clean it up a bit
so we allow the logic to fail down to -ENODEV at the end of
the if/else ladder, rather than using ifdefs to repeat the same
failure code over and over.

Also, remove the support for the auto-configuration. I'm not aware of
anyone using it, and it ends up using the bus mutex before it's been
initialized.
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 e19df76a
......@@ -183,28 +183,10 @@ void fsl_pq_mdio_bus_name(char *name, struct device_node *np)
}
EXPORT_SYMBOL_GPL(fsl_pq_mdio_bus_name);
/* Scan the bus in reverse, looking for an empty spot */
static int fsl_pq_mdio_find_free(struct mii_bus *new_bus)
{
int i;
for (i = PHY_MAX_ADDR; i > 0; i--) {
u32 phy_id;
if (get_phy_id(new_bus, i, &phy_id))
return -1;
if (phy_id == 0xffffffff)
break;
}
return i;
}
#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct device_node *np)
{
#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
struct gfar __iomem *enet_regs;
/*
......@@ -220,15 +202,15 @@ static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct devi
} else if (of_device_is_compatible(np, "fsl,etsec2-mdio") ||
of_device_is_compatible(np, "fsl,etsec2-tbi")) {
return of_iomap(np, 1);
} else
return NULL;
}
}
#endif
return NULL;
}
#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id)
{
#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
struct device_node *np = NULL;
int err = 0;
......@@ -261,9 +243,10 @@ static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id)
return err;
else
return -EINVAL;
}
#else
return -ENODEV;
#endif
}
static int fsl_pq_mdio_probe(struct platform_device *ofdev)
{
......@@ -339,19 +322,13 @@ static int fsl_pq_mdio_probe(struct platform_device *ofdev)
of_device_is_compatible(np, "fsl,etsec2-mdio") ||
of_device_is_compatible(np, "fsl,etsec2-tbi") ||
of_device_is_compatible(np, "gianfar")) {
#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
tbipa = get_gfar_tbipa(regs, np);
if (!tbipa) {
err = -EINVAL;
goto err_free_irqs;
}
#else
err = -ENODEV;
goto err_free_irqs;
#endif
} else if (of_device_is_compatible(np, "fsl,ucc-mdio") ||
of_device_is_compatible(np, "ucc_geth_phy")) {
#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
u32 id;
static u32 mii_mng_master;
......@@ -364,10 +341,6 @@ static int fsl_pq_mdio_probe(struct platform_device *ofdev)
mii_mng_master = id;
ucc_set_qe_mux_mii_mng(id - 1);
}
#else
err = -ENODEV;
goto err_free_irqs;
#endif
} else {
err = -ENODEV;
goto err_free_irqs;
......@@ -386,16 +359,6 @@ static int fsl_pq_mdio_probe(struct platform_device *ofdev)
}
if (tbiaddr == -1) {
out_be32(tbipa, 0);
tbiaddr = fsl_pq_mdio_find_free(new_bus);
}
/*
* We define TBIPA at 0 to be illegal, opting to fail for boards that
* have PHYs at 1-31, rather than change tbipa and rescan.
*/
if (tbiaddr == 0) {
err = -EBUSY;
goto err_free_irqs;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册