提交 95237b80 编写于 作者: L Linus Torvalds

Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: Fix failure to shutdown with CPU hotplug
  powerpc: Fix PCI in Holly device tree
...@@ -133,61 +133,61 @@ ...@@ -133,61 +133,61 @@
reg = <0x00007400 0x00000400>; reg = <0x00007400 0x00000400>;
big-endian; big-endian;
}; };
};
pci@1000 { pci@c0001000 {
device_type = "pci"; device_type = "pci";
compatible = "tsi109-pci", "tsi108-pci"; compatible = "tsi109-pci", "tsi108-pci";
#interrupt-cells = <1>; #interrupt-cells = <1>;
#size-cells = <2>; #size-cells = <2>;
#address-cells = <3>; #address-cells = <3>;
reg = <0x00001000 0x00001000>; reg = <0xc0001000 0x00001000>;
bus-range = <0x0 0x0>; bus-range = <0x0 0x0>;
/*----------------------------------------------------+ /*----------------------------------------------------+
| PCI memory range. | PCI memory range.
| 01 denotes I/O space | 01 denotes I/O space
| 02 denotes 32-bit memory space | 02 denotes 32-bit memory space
+----------------------------------------------------*/ +----------------------------------------------------*/
ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000 ranges = <0x02000000 0x00000000 0x40000000 0x40000000 0x00000000 0x10000000
0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>; 0x01000000 0x00000000 0x00000000 0x7e000000 0x00000000 0x00010000>;
clock-frequency = <133333332>; clock-frequency = <133333332>;
interrupt-parent = <&MPIC>; interrupt-parent = <&MPIC>;
interrupts = <0x17 0x2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
/*----------------------------------------------------+
| The INTA, INTB, INTC, INTD are shared.
+----------------------------------------------------*/
interrupt-map = <
0x800 0x0 0x0 0x1 &RT0 0x24 0x0
0x800 0x0 0x0 0x2 &RT0 0x25 0x0
0x800 0x0 0x0 0x3 &RT0 0x26 0x0
0x800 0x0 0x0 0x4 &RT0 0x27 0x0
0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
>;
RT0: router@1180 {
device_type = "pic-router";
interrupt-controller;
big-endian;
clock-frequency = <0>;
#address-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0x17 0x2>; interrupts = <0x17 0x2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-parent = <&MPIC>;
/*----------------------------------------------------+
| The INTA, INTB, INTC, INTD are shared.
+----------------------------------------------------*/
interrupt-map = <
0x800 0x0 0x0 0x1 &RT0 0x24 0x0
0x800 0x0 0x0 0x2 &RT0 0x25 0x0
0x800 0x0 0x0 0x3 &RT0 0x26 0x0
0x800 0x0 0x0 0x4 &RT0 0x27 0x0
0x1000 0x0 0x0 0x1 &RT0 0x25 0x0
0x1000 0x0 0x0 0x2 &RT0 0x26 0x0
0x1000 0x0 0x0 0x3 &RT0 0x27 0x0
0x1000 0x0 0x0 0x4 &RT0 0x24 0x0
0x1800 0x0 0x0 0x1 &RT0 0x26 0x0
0x1800 0x0 0x0 0x2 &RT0 0x27 0x0
0x1800 0x0 0x0 0x3 &RT0 0x24 0x0
0x1800 0x0 0x0 0x4 &RT0 0x25 0x0
0x2000 0x0 0x0 0x1 &RT0 0x27 0x0
0x2000 0x0 0x0 0x2 &RT0 0x24 0x0
0x2000 0x0 0x0 0x3 &RT0 0x25 0x0
0x2000 0x0 0x0 0x4 &RT0 0x26 0x0
>;
RT0: router@1180 {
device_type = "pic-router";
interrupt-controller;
big-endian;
clock-frequency = <0>;
#address-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0x17 0x2>;
interrupt-parent = <&MPIC>;
};
}; };
}; };
......
...@@ -34,11 +34,7 @@ ...@@ -34,11 +34,7 @@
#include <asm/smp.h> #include <asm/smp.h>
#ifdef CONFIG_HOTPLUG_CPU #ifdef CONFIG_HOTPLUG_CPU
/* this is used for software suspend, and that shuts down #define cpu_should_die() cpu_is_offline(smp_processor_id())
* CPUs even while the system is still booting... */
#define cpu_should_die() (cpu_is_offline(smp_processor_id()) && \
(system_state == SYSTEM_RUNNING \
|| system_state == SYSTEM_BOOTING))
#else #else
#define cpu_should_die() 0 #define cpu_should_die() 0
#endif #endif
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册