ARM: dts: msm: Add 8058 PMIC to ssbi bus

Add the PMIC and the sub-devices that are currently supported in
the kernel to the DT.
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NKumar Gala <galak@codeaurora.org>

arch/arm/boot/dts/qcom-msm8660-surf.dts

+#include <dt-bindings/input/input.h>
+
 #include "qcom-msm8660.dtsi"
 
 / {
@@ -14,3 +16,31 @@
 		};
 	};
 };
+
+&pmicintc {
+	keypad@148 {
+		linux,keymap = <
+			MATRIX_KEY(0, 0, KEY_FN_F1)
+			MATRIX_KEY(0, 1, KEY_UP)
+			MATRIX_KEY(0, 2, KEY_LEFT)
+			MATRIX_KEY(0, 3, KEY_VOLUMEUP)
+			MATRIX_KEY(1, 0, KEY_FN_F2)
+			MATRIX_KEY(1, 1, KEY_RIGHT)
+			MATRIX_KEY(1, 2, KEY_DOWN)
+			MATRIX_KEY(1, 3, KEY_VOLUMEDOWN)
+			MATRIX_KEY(2, 3, KEY_ENTER)
+			MATRIX_KEY(4, 0, KEY_CAMERA_FOCUS)
+			MATRIX_KEY(4, 1, KEY_UP)
+			MATRIX_KEY(4, 2, KEY_LEFT)
+			MATRIX_KEY(4, 3, KEY_HOME)
+			MATRIX_KEY(4, 4, KEY_FN_F3)
+			MATRIX_KEY(5, 0, KEY_CAMERA)
+			MATRIX_KEY(5, 1, KEY_RIGHT)
+			MATRIX_KEY(5, 2, KEY_DOWN)
+			MATRIX_KEY(5, 3, KEY_BACK)
+			MATRIX_KEY(5, 4, KEY_MENU)
+			>;
+		keypad,num-rows = <6>;
+		keypad,num-columns = <5>;
+	};
+};

arch/arm/boot/dts/qcom-msm8660.dtsi

@@ -103,6 +103,48 @@
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
 			qcom,controller-type = "pmic-arbiter";
+
+			pmicintc: pmic@0 {
+				compatible = "qcom,pm8058";
+				interrupt-parent = <&msmgpio>;
+				interrupts = <88 8>;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				pwrkey@1c {
+					compatible = "qcom,pm8058-pwrkey";
+					reg = <0x1c>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <50 1>, <51 1>;
+					debounce = <15625>;
+					pull-up;
+				};
+
+				keypad@148 {
+					compatible = "qcom,pm8058-keypad";
+					reg = <0x148>;
+					interrupt-parent = <&pmicintc>;
+					interrupts = <74 1>, <75 1>;
+					debounce = <15>;
+					scan-delay = <32>;
+					row-hold = <91500>;
+				};
+
+				rtc@11d {
+					compatible = "qcom,pm8058-rtc";
+					interrupt-parent = <&pmicintc>;
+					interrupts = <39 1>;
+					reg = <0x11d>;
+					allow-set-time;
+				};
+
+				vibrator@4a {
+					compatible = "qcom,pm8058-vib";
+					reg = <0x4a>;
+				};
+			};
 		};
 	};
 };