Merge tag 'gpmc-czimage' of git://gitorious.org/x0148406-public/linux-kernel...

Merge tag 'gpmc-czimage' of git://gitorious.org/x0148406-public/linux-kernel into omap-for-v3.8/cleanup-headers-gpmc

gpmc cleanup for common ARM zImage

arch/arm/mach-omap2/board-2430sdp.c

@@ -34,7 +34,7 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/usb.h>
 #include "gpmc-smc91x.h"
 

arch/arm/mach-omap2/board-3430sdp.c

@@ -33,7 +33,7 @@
 #include <plat/usb.h>
 #include "common.h"
 #include <plat/dma.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
 

arch/arm/mach-omap2/board-apollon.c

@@ -35,7 +35,7 @@
 
 #include <plat/led.h>
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>

arch/arm/mach-omap2/board-cm-t35.c

@@ -40,7 +40,7 @@
 
 #include "common.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/usb.h>
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
@@ -53,6 +53,7 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
+#include "gpmc-nand.h"
 
 #define CM_T35_GPIO_PENDOWN		57
 #define SB_T35_USB_HUB_RESET_GPIO	167
@@ -181,7 +182,7 @@ static struct omap_nand_platform_data cm_t35_nand_data = {
 
 static void __init cm_t35_init_nand(void)
 {
-	if (gpmc_nand_init(&cm_t35_nand_data) < 0)
+	if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0)
 		pr_err("CM-T35: Unable to register NAND device\n");
 }
 #else

arch/arm/mach-omap2/board-cm-t3517.c

@@ -41,7 +41,7 @@
 #include "common.h"
 #include <plat/usb.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 
 #include "am35xx.h"
 
@@ -49,6 +49,7 @@
 #include "control.h"
 #include "common-board-devices.h"
 #include "am35xx-emac.h"
+#include "gpmc-nand.h"
 
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 static struct gpio_led cm_t3517_leds[] = {
@@ -240,7 +241,7 @@ static struct omap_nand_platform_data cm_t3517_nand_data = {
 
 static void __init cm_t3517_init_nand(void)
 {
-	if (gpmc_nand_init(&cm_t3517_nand_data) < 0)
+	if (gpmc_nand_init(&cm_t3517_nand_data, NULL) < 0)
 		pr_err("CM-T3517: NAND initialization failed\n");
 }
 #else

arch/arm/mach-omap2/board-devkit8000.c

@@ -39,7 +39,7 @@
 #include <asm/mach/flash.h>
 
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>
@@ -55,8 +55,11 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mux.h"
 #include "hsmmc.h"
+#include "board-flash.h"
 #include "common-board-devices.h"
 
+#define	NAND_CS			0
+
 #define OMAP_DM9000_GPIO_IRQ	25
 #define OMAP3_DEVKIT_TS_GPIO	27
 
@@ -621,8 +624,9 @@ static void __init devkit8000_init(void)
 
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
-	omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions,
-			     ARRAY_SIZE(devkit8000_nand_partitions));
+	board_nand_init(devkit8000_nand_partitions,
+			ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS,
+			NAND_BUSWIDTH_16, NULL);
 	omap_twl4030_audio_init("omap3beagle");
 
 	/* Ensure SDRC pins are mux'd for self-refresh */

arch/arm/mach-omap2/board-flash.c

@@ -18,13 +18,15 @@
 #include <linux/io.h>
 
 #include <plat/cpu.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
 #include <plat/tc.h>
 
 #include "common.h"
 #include "board-flash.h"
+#include "gpmc-onenand.h"
+#include "gpmc-nand.h"
 
 #define REG_FPGA_REV			0x10
 #define REG_FPGA_DIP_SWITCH_INPUT2	0x60
@@ -104,36 +106,35 @@ __init board_onenand_init(struct mtd_partition *onenand_parts,
 		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
 
 /* Note that all values in this struct are in nanoseconds */
-static struct gpmc_timings nand_timings = {
+struct gpmc_timings nand_default_timings[1] = {
+	{
+		.sync_clk = 0,
 
-	.sync_clk = 0,
+		.cs_on = 0,
+		.cs_rd_off = 36,
+		.cs_wr_off = 36,
 
-	.cs_on = 0,
-	.cs_rd_off = 36,
-	.cs_wr_off = 36,
+		.adv_on = 6,
+		.adv_rd_off = 24,
+		.adv_wr_off = 36,
 
-	.adv_on = 6,
-	.adv_rd_off = 24,
-	.adv_wr_off = 36,
+		.we_off = 30,
+		.oe_off = 48,
 
-	.we_off = 30,
-	.oe_off = 48,
+		.access = 54,
+		.rd_cycle = 72,
+		.wr_cycle = 72,
 
-	.access = 54,
-	.rd_cycle = 72,
-	.wr_cycle = 72,
-
-	.wr_access = 30,
-	.wr_data_mux_bus = 0,
+		.wr_access = 30,
+		.wr_data_mux_bus = 0,
+	},
 };
 
-static struct omap_nand_platform_data board_nand_data = {
-	.gpmc_t		= &nand_timings,
-};
+static struct omap_nand_platform_data board_nand_data;
 
 void
-__init board_nand_init(struct mtd_partition *nand_parts,
-			u8 nr_parts, u8 cs, int nand_type)
+__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
+				int nand_type, struct gpmc_timings *gpmc_t)
 {
 	board_nand_data.cs		= cs;
 	board_nand_data.parts		= nand_parts;
@@ -141,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts,
 	board_nand_data.devsize		= nand_type;
 
 	board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
-	gpmc_nand_init(&board_nand_data);
+	gpmc_nand_init(&board_nand_data, gpmc_t);
 }
 #endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
 
@@ -238,5 +239,6 @@ void __init board_flash_init(struct flash_partitions partition_info[],
 		pr_err("NAND: Unable to find configuration in GPMC\n");
 	else
 		board_nand_init(partition_info[2].parts,
-			partition_info[2].nr_parts, nandcs, nand_type);
+			partition_info[2].nr_parts, nandcs,
+			nand_type, nand_default_timings);
 }

arch/arm/mach-omap2/board-flash.h

@@ -12,7 +12,7 @@
  */
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 
 #define PDC_NOR		1
 #define PDC_NAND	2
@@ -40,12 +40,14 @@ static inline void board_flash_init(struct flash_partitions part[],
 #if defined(CONFIG_MTD_NAND_OMAP2) || \
 		defined(CONFIG_MTD_NAND_OMAP2_MODULE)
 extern void board_nand_init(struct mtd_partition *nand_parts,
-					u8 nr_parts, u8 cs, int nand_type);
+		u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t);
+extern struct gpmc_timings nand_default_timings[];
 #else
 static inline void board_nand_init(struct mtd_partition *nand_parts,
-					u8 nr_parts, u8 cs, int nand_type)
+		u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t)
 {
 }
+#define	nand_default_timings	NULL
 #endif
 
 #if defined(CONFIG_MTD_ONENAND_OMAP2) || \

arch/arm/mach-omap2/board-h4.c

@@ -33,7 +33,6 @@
 
 #include <plat/menelaus.h>
 #include <plat/dma.h>
-#include <plat/gpmc.h>
 #include "debug-devices.h"
 
 #include <video/omapdss.h>
@@ -42,6 +41,7 @@
 #include "common.h"
 #include "mux.h"
 #include "control.h"
+#include "gpmc.h"
 
 #define H4_FLASH_CS	0
 #define H4_SMC91X_CS	1

arch/arm/mach-omap2/board-igep0020.c

@@ -30,7 +30,7 @@
 #include <asm/mach/arch.h>
 
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/usb.h>
 
 #include <video/omapdss.h>
@@ -43,6 +43,7 @@
 #include "common-board-devices.h"
 #include "board-flash.h"
 #include "control.h"
+#include "gpmc-onenand.h"
 
 #define IGEP2_SMSC911X_CS       5
 #define IGEP2_SMSC911X_GPIO     176
@@ -175,7 +176,7 @@ static void __init igep_flash_init(void)
 		pr_info("IGEP: initializing NAND memory device\n");
 		board_nand_init(igep_flash_partitions,
 				ARRAY_SIZE(igep_flash_partitions),
-				0, NAND_BUSWIDTH_16);
+				0, NAND_BUSWIDTH_16, nand_default_timings);
 	} else if (mux == IGEP_SYSBOOT_ONENAND) {
 		pr_info("IGEP: initializing OneNAND memory device\n");
 		board_onenand_init(igep_flash_partitions,

arch/arm/mach-omap2/board-ldp.c

@@ -35,7 +35,7 @@
 #include <asm/mach/map.h>
 
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <mach/board-zoom.h>
 #include <plat/usb.h>
 #include "gpmc-smsc911x.h"
@@ -420,8 +420,8 @@ static void __init omap_ldp_init(void)
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
 	usb_musb_init(NULL);
-	board_nand_init(ldp_nand_partitions,
-		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
+	board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
+			ZOOM_NAND_CS, 0, nand_default_timings);
 
 	omap_hsmmc_init(mmc);
 	ldp_display_init();

arch/arm/mach-omap2/board-n8x0.c

@@ -32,6 +32,7 @@
 #include <plat/mmc.h>
 
 #include "mux.h"
+#include "gpmc-onenand.h"
 
 #define TUSB6010_ASYNC_CS	1
 #define TUSB6010_SYNC_CS	4

arch/arm/mach-omap2/board-omap3beagle.c

@@ -41,7 +41,7 @@
 #include "common.h"
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 #include <plat/omap_device.h>
@@ -49,8 +49,11 @@
 #include "mux.h"
 #include "hsmmc.h"
 #include "pm.h"
+#include "board-flash.h"
 #include "common-board-devices.h"
 
+#define	NAND_CS	0
+
 /*
  * OMAP3 Beagle revision
  * Run time detection of Beagle revision is done by reading GPIO.
@@ -512,8 +515,9 @@ static void __init omap3_beagle_init(void)
 
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
-	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
-			     ARRAY_SIZE(omap3beagle_nand_partitions));
+	board_nand_init(omap3beagle_nand_partitions,
+			ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
+			NAND_BUSWIDTH_16, NULL);
 	omap_twl4030_audio_init("omap3beagle");
 
 	/* Ensure msecure is mux'd to be able to set the RTC. */

arch/arm/mach-omap2/board-omap3evm.c

@@ -56,6 +56,9 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
+#include "board-flash.h"
+
+#define	NAND_CS			0
 
 #define OMAP3_EVM_TS_GPIO	175
 #define OMAP3_EVM_EHCI_VBUS	22
@@ -731,8 +734,9 @@ static void __init omap3_evm_init(void)
 	}
 	usb_musb_init(&musb_board_data);
 	usbhs_init(&usbhs_bdata);
-	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions,
-			     ARRAY_SIZE(omap3evm_nand_partitions));
+	board_nand_init(omap3evm_nand_partitions,
+			ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
+			NAND_BUSWIDTH_16, NULL);
 
 	omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
 	omap3evm_init_smsc911x();

arch/arm/mach-omap2/board-omap3logic.c

@@ -35,7 +35,7 @@
 #include <asm/mach/map.h>
 
 #include "gpmc-smsc911x.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/sdrc.h>
 #include <plat/usb.h>
 

arch/arm/mach-omap2/board-omap3pandora.c

@@ -50,6 +50,7 @@
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
+#include "gpmc-nand.h"
 
 #define PANDORA_WIFI_IRQ_GPIO		21
 #define PANDORA_WIFI_NRESET_GPIO	23
@@ -602,7 +603,7 @@ static void __init omap3pandora_init(void)
 	omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
 	usbhs_init(&usbhs_bdata);
 	usb_musb_init(NULL);
-	gpmc_nand_init(&pandora_nand_data);
+	gpmc_nand_init(&pandora_nand_data, NULL);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);

arch/arm/mach-omap2/board-omap3stalker.c

@@ -40,7 +40,7 @@
 #include <asm/mach/flash.h>
 
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 #include <video/omapdss.h>

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -44,12 +44,13 @@
 #include <asm/system_info.h>
 
 #include "common.h"
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <linux/platform_data/mtd-nand-omap2.h>
 #include <plat/usb.h>
 
 #include "mux.h"
 #include "hsmmc.h"
+#include "board-flash.h"
 #include "common-board-devices.h"
 
 #include <asm/setup.h>
@@ -59,6 +60,8 @@
 #define TB_BL_PWM_TIMER		9
 #define TB_KILL_POWER_GPIO	168
 
+#define	NAND_CS			0
+
 static unsigned long touchbook_revision;
 
 static struct mtd_partition omap3touchbook_nand_partitions[] = {
@@ -365,8 +368,9 @@ static void __init omap3_touchbook_init(void)
 	omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
-	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions,
-			     ARRAY_SIZE(omap3touchbook_nand_partitions));
+	board_nand_init(omap3touchbook_nand_partitions,
+			ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
+			NAND_BUSWIDTH_16, NULL);
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
 	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);

arch/arm/mach-omap2/board-overo.c

@@ -49,14 +49,17 @@
 #include <video/omapdss.h>
 #include <video/omap-panel-generic-dpi.h>
 #include <video/omap-panel-tfp410.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/usb.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "hsmmc.h"
+#include "board-flash.h"
 #include "common-board-devices.h"
 
+#define	NAND_CS			0
+
 #define OVERO_GPIO_BT_XGATE	15
 #define OVERO_GPIO_W2W_NRESET	16
 #define OVERO_GPIO_PENDOWN	114
@@ -495,8 +498,8 @@ static void __init overo_init(void)
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
 				  mt46h32m32lf6_sdrc_params);
-	omap_nand_flash_init(0, overo_nand_partitions,
-			     ARRAY_SIZE(overo_nand_partitions));
+	board_nand_init(overo_nand_partitions,
+			ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
 	usb_musb_init(NULL);
 	usbhs_init(&usbhs_bdata);
 	overo_spi_init();

arch/arm/mach-omap2/board-rm680.c

@@ -25,7 +25,7 @@
 #include <plat/i2c.h>
 #include <plat/mmc.h>
 #include <plat/usb.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "common.h"
 #include <plat/serial.h>
 
@@ -33,6 +33,7 @@
 #include "hsmmc.h"
 #include "sdram-nokia.h"
 #include "common-board-devices.h"
+#include "gpmc-onenand.h"
 
 static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
 	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -32,7 +32,7 @@
 
 #include "common.h"
 #include <plat/dma.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/omap-pm.h>
 #include "gpmc-smc91x.h"
 
@@ -54,6 +54,7 @@
 #include "mux.h"
 #include "hsmmc.h"
 #include "common-board-devices.h"
+#include "gpmc-onenand.h"
 
 #define SYSTEM_REV_B_USES_VAUX3	0x1699
 #define SYSTEM_REV_S_USES_VAUX3 0x8

arch/arm/mach-omap2/board-rx51.c

@@ -25,7 +25,7 @@
 
 #include "common.h"
 #include <plat/dma.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/usb.h>
 
 #include "mux.h"

arch/arm/mach-omap2/board-zoom-debugboard.c

@@ -17,7 +17,7 @@
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "gpmc-smsc911x.h"
 
 #include <mach/board-zoom.h>

arch/arm/mach-omap2/board-zoom.c

@@ -113,8 +113,9 @@ static void __init omap_zoom_init(void)
 		usbhs_init(&usbhs_bdata);
 	}
 
-	board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions),
-						ZOOM_NAND_CS, NAND_BUSWIDTH_16);
+	board_nand_init(zoom_nand_partitions,
+			ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS,
+			NAND_BUSWIDTH_16, nand_default_timings);
 	zoom_debugboard_init();
 	zoom_peripherals_init();
 

arch/arm/mach-omap2/common-board-devices.c

@@ -25,7 +25,6 @@
 #include <linux/spi/ads7846.h>
 
 #include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/mtd-nand-omap2.h>
 
 #include "common.h"
 #include "common-board-devices.h"
@@ -96,48 +95,3 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 {
 }
 #endif
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-static struct omap_nand_platform_data nand_data;
-
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
-				 int nr_parts)
-{
-	u8 cs = 0;
-	u8 nandcs = GPMC_CS_NUM + 1;
-
-	/* find out the chip-select on which NAND exists */
-	while (cs < GPMC_CS_NUM) {
-		u32 ret = 0;
-		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
-
-		if ((ret & 0xC00) == 0x800) {
-			printk(KERN_INFO "Found NAND on CS%d\n", cs);
-			if (nandcs > GPMC_CS_NUM)
-				nandcs = cs;
-		}
-		cs++;
-	}
-
-	if (nandcs > GPMC_CS_NUM) {
-		pr_info("NAND: Unable to find configuration in GPMC\n");
-		return;
-	}
-
-	if (nandcs < GPMC_CS_NUM) {
-		nand_data.cs = nandcs;
-		nand_data.parts = parts;
-		nand_data.nr_parts = nr_parts;
-		nand_data.devsize = options;
-
-		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
-		if (gpmc_nand_init(&nand_data) < 0)
-			printk(KERN_ERR "Unable to register NAND device\n");
-	}
-}
-#else
-void __init omap_nand_flash_init(int options, struct mtd_partition *parts,
-				 int nr_parts)
-{
-}
-#endif

arch/arm/mach-omap2/common-board-devices.h

@@ -10,6 +10,5 @@ struct ads7846_platform_data;
 
 void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 		       struct ads7846_platform_data *board_pdata);
-void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts);
 
 #endif /* __OMAP_COMMON_BOARD_DEVICES__ */

arch/arm/mach-omap2/gpmc-nand.c

@@ -17,9 +17,12 @@
 
 #include <asm/mach/flash.h>
 
-#include <plat/gpmc.h>
-
+#include "gpmc.h"
 #include "soc.h"
+#include "gpmc-nand.h"
+
+/* minimum size for IO mapping */
+#define	NAND_IO_SIZE	4
 
 static struct resource gpmc_nand_resource[] = {
 	{
@@ -40,41 +43,36 @@ static struct platform_device gpmc_nand_device = {
 	.resource	= gpmc_nand_resource,
 };
 
-static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data)
+static int omap2_nand_gpmc_retime(
+				struct omap_nand_platform_data *gpmc_nand_data,
+				struct gpmc_timings *gpmc_t)
 {
 	struct gpmc_timings t;
 	int err;
 
-	if (!gpmc_nand_data->gpmc_t)
-		return 0;
-
 	memset(&t, 0, sizeof(t));
-	t.sync_clk = gpmc_nand_data->gpmc_t->sync_clk;
-	t.cs_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_on);
-	t.adv_on = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->adv_on);
+	t.sync_clk = gpmc_t->sync_clk;
+	t.cs_on = gpmc_round_ns_to_ticks(gpmc_t->cs_on);
+	t.adv_on = gpmc_round_ns_to_ticks(gpmc_t->adv_on);
 
 	/* Read */
-	t.adv_rd_off = gpmc_round_ns_to_ticks(
-				gpmc_nand_data->gpmc_t->adv_rd_off);
+	t.adv_rd_off = gpmc_round_ns_to_ticks(gpmc_t->adv_rd_off);
 	t.oe_on  = t.adv_on;
-	t.access = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->access);
-	t.oe_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->oe_off);
-	t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_rd_off);
-	t.rd_cycle  = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->rd_cycle);
+	t.access = gpmc_round_ns_to_ticks(gpmc_t->access);
+	t.oe_off = gpmc_round_ns_to_ticks(gpmc_t->oe_off);
+	t.cs_rd_off = gpmc_round_ns_to_ticks(gpmc_t->cs_rd_off);
+	t.rd_cycle  = gpmc_round_ns_to_ticks(gpmc_t->rd_cycle);
 
 	/* Write */
-	t.adv_wr_off = gpmc_round_ns_to_ticks(
-				gpmc_nand_data->gpmc_t->adv_wr_off);
+	t.adv_wr_off = gpmc_round_ns_to_ticks(gpmc_t->adv_wr_off);
 	t.we_on  = t.oe_on;
 	if (cpu_is_omap34xx()) {
-	    t.wr_data_mux_bus =	gpmc_round_ns_to_ticks(
-				gpmc_nand_data->gpmc_t->wr_data_mux_bus);
-	    t.wr_access = gpmc_round_ns_to_ticks(
-				gpmc_nand_data->gpmc_t->wr_access);
+	    t.wr_data_mux_bus =	gpmc_round_ns_to_ticks(gpmc_t->wr_data_mux_bus);
+	    t.wr_access = gpmc_round_ns_to_ticks(gpmc_t->wr_access);
 	}
-	t.we_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->we_off);
-	t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->cs_wr_off);
-	t.wr_cycle  = gpmc_round_ns_to_ticks(gpmc_nand_data->gpmc_t->wr_cycle);
+	t.we_off = gpmc_round_ns_to_ticks(gpmc_t->we_off);
+	t.cs_wr_off = gpmc_round_ns_to_ticks(gpmc_t->cs_wr_off);
+	t.wr_cycle  = gpmc_round_ns_to_ticks(gpmc_t->wr_cycle);
 
 	/* Configure GPMC */
 	if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16)
@@ -91,7 +89,29 @@ static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data
 	return 0;
 }
 
-int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
+static bool __init gpmc_hwecc_bch_capable(enum omap_ecc ecc_opt)
+{
+	/* support only OMAP3 class */
+	if (!cpu_is_omap34xx()) {
+		pr_err("BCH ecc is not supported on this CPU\n");
+		return 0;
+	}
+
+	/*
+	 * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
+	 * Other chips may be added if confirmed to work.
+	 */
+	if ((ecc_opt == OMAP_ECC_BCH4_CODE_HW) &&
+	    (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
+		pr_err("BCH 4-bit mode is not supported on this CPU\n");
+		return 0;
+	}
+
+	return 1;
+}
+
+int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data,
+			  struct gpmc_timings *gpmc_t)
 {
 	int err	= 0;
 	struct device *dev = &gpmc_nand_device.dev;
@@ -112,11 +132,13 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
 				gpmc_get_client_irq(GPMC_IRQ_FIFOEVENTENABLE);
 	gpmc_nand_resource[2].start =
 				gpmc_get_client_irq(GPMC_IRQ_COUNT_EVENT);
-	 /* Set timings in GPMC */
-	err = omap2_nand_gpmc_retime(gpmc_nand_data);
-	if (err < 0) {
-		dev_err(dev, "Unable to set gpmc timings: %d\n", err);
-		return err;
+
+	if (gpmc_t) {
+		err = omap2_nand_gpmc_retime(gpmc_nand_data, gpmc_t);
+		if (err < 0) {
+			dev_err(dev, "Unable to set gpmc timings: %d\n", err);
+			return err;
+		}
 	}
 
 	/* Enable RD PIN Monitoring Reg */
@@ -126,6 +148,9 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data)
 
 	gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs);
 
+	if (!gpmc_hwecc_bch_capable(gpmc_nand_data->ecc_opt))
+		return -EINVAL;
+
 	err = platform_device_register(&gpmc_nand_device);
 	if (err < 0) {
 		dev_err(dev, "Unable to register NAND device\n");

arch/arm/mach-omap2/gpmc-nand.h

+/*
+ *  arch/arm/mach-omap2/gpmc-nand.h
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef	__OMAP2_GPMC_NAND_H
+#define	__OMAP2_GPMC_NAND_H
+
+#include "gpmc.h"
+#include <linux/platform_data/mtd-nand-omap2.h>
+
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
+extern int gpmc_nand_init(struct omap_nand_platform_data *d,
+			  struct gpmc_timings *gpmc_t);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d,
+				 struct gpmc_timings *gpmc_t)
+{
+	return 0;
+}
+#endif
+
+#endif

arch/arm/mach-omap2/gpmc-onenand.c

@@ -16,15 +16,25 @@
 #include <linux/mtd/onenand_regs.h>
 #include <linux/io.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/err.h>
 
 #include <asm/mach/flash.h>
 
-#include <plat/gpmc.h>
-
+#include "gpmc.h"
 #include "soc.h"
+#include "gpmc-onenand.h"
 
 #define	ONENAND_IO_SIZE	SZ_128K
 
+#define	ONENAND_FLAG_SYNCREAD	(1 << 0)
+#define	ONENAND_FLAG_SYNCWRITE	(1 << 1)
+#define	ONENAND_FLAG_HF		(1 << 2)
+#define	ONENAND_FLAG_VHF	(1 << 3)
+
+static unsigned onenand_flags;
+static unsigned latency;
+static int fclk_offset;
+
 static struct omap_onenand_platform_data *gpmc_onenand_data;
 
 static struct resource gpmc_onenand_resource = {
@@ -38,11 +48,9 @@ static struct platform_device gpmc_onenand_device = {
 	.resource	= &gpmc_onenand_resource,
 };
 
-static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
+static struct gpmc_timings omap2_onenand_calc_async_timings(void)
 {
 	struct gpmc_timings t;
-	u32 reg;
-	int err;
 
 	const int t_cer = 15;
 	const int t_avdp = 12;
@@ -55,11 +63,6 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 	const int t_wpl = 40;
 	const int t_wph = 30;
 
-	/* Ensure sync read and sync write are disabled */
-	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
-	reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
-	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
-
 	memset(&t, 0, sizeof(t));
 	t.sync_clk = 0;
 	t.cs_on = 0;
@@ -86,25 +89,30 @@ static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
 	t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
 	t.wr_cycle  = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
 
+	return t;
+}
+
+static int gpmc_set_async_mode(int cs, struct gpmc_timings *t)
+{
 	/* Configure GPMC for asynchronous read */
 	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
 			  GPMC_CONFIG1_DEVICESIZE_16 |
 			  GPMC_CONFIG1_MUXADDDATA);
 
-	err = gpmc_cs_set_timings(cs, &t);
-	if (err)
-		return err;
+	return gpmc_cs_set_timings(cs, t);
+}
+
+static void omap2_onenand_set_async_mode(void __iomem *onenand_base)
+{
+	u32 reg;
 
 	/* Ensure sync read and sync write are disabled */
 	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
 	reg &= ~ONENAND_SYS_CFG1_SYNC_READ & ~ONENAND_SYS_CFG1_SYNC_WRITE;
 	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
-
-	return 0;
 }
 
-static void set_onenand_cfg(void __iomem *onenand_base, int latency,
-				int sync_read, int sync_write, int hf, int vhf)
+static void set_onenand_cfg(void __iomem *onenand_base)
 {
 	u32 reg;
 
@@ -112,19 +120,19 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency,
 	reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
 	reg |=	(latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
 		ONENAND_SYS_CFG1_BL_16;
-	if (sync_read)
+	if (onenand_flags & ONENAND_FLAG_SYNCREAD)
 		reg |= ONENAND_SYS_CFG1_SYNC_READ;
 	else
 		reg &= ~ONENAND_SYS_CFG1_SYNC_READ;
-	if (sync_write)
+	if (onenand_flags & ONENAND_FLAG_SYNCWRITE)
 		reg |= ONENAND_SYS_CFG1_SYNC_WRITE;
 	else
 		reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE;
-	if (hf)
+	if (onenand_flags & ONENAND_FLAG_HF)
 		reg |= ONENAND_SYS_CFG1_HF;
 	else
 		reg &= ~ONENAND_SYS_CFG1_HF;
-	if (vhf)
+	if (onenand_flags & ONENAND_FLAG_VHF)
 		reg |= ONENAND_SYS_CFG1_VHF;
 	else
 		reg &= ~ONENAND_SYS_CFG1_VHF;
@@ -132,21 +140,10 @@ static void set_onenand_cfg(void __iomem *onenand_base, int latency,
 }
 
 static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg,
-				  void __iomem *onenand_base, bool *clk_dep)
+				  void __iomem *onenand_base)
 {
 	u16 ver = readw(onenand_base + ONENAND_REG_VERSION_ID);
-	int freq = 0;
-
-	if (cfg->get_freq) {
-		struct onenand_freq_info fi;
-
-		fi.maf_id = readw(onenand_base + ONENAND_REG_MANUFACTURER_ID);
-		fi.dev_id = readw(onenand_base + ONENAND_REG_DEVICE_ID);
-		fi.ver_id = ver;
-		freq = cfg->get_freq(&fi, clk_dep);
-		if (freq)
-			return freq;
-	}
+	int freq;
 
 	switch ((ver >> 4) & 0xf) {
 	case 0:
@@ -172,9 +169,9 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg,
 	return freq;
 }
 
-static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
-					void __iomem *onenand_base,
-					int *freq_ptr)
+static struct gpmc_timings
+omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg,
+				int freq)
 {
 	struct gpmc_timings t;
 	const int t_cer  = 15;
@@ -184,29 +181,15 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 	const int t_wpl  = 40;
 	const int t_wph  = 30;
 	int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
-	int div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
-	int first_time = 0, hf = 0, vhf = 0, sync_read = 0, sync_write = 0;
-	int err, ticks_cez;
-	int cs = cfg->cs, freq = *freq_ptr;
 	u32 reg;
-	bool clk_dep = false;
+	int div, fclk_offset_ns, gpmc_clk_ns;
+	int ticks_cez;
+	int cs = cfg->cs;
 
-	if (cfg->flags & ONENAND_SYNC_READ) {
-		sync_read = 1;
-	} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
-		sync_read = 1;
-		sync_write = 1;
-	} else
-		return omap2_onenand_set_async_mode(cs, onenand_base);
-
-	if (!freq) {
-		/* Very first call freq is not known */
-		err = omap2_onenand_set_async_mode(cs, onenand_base);
-		if (err)
-			return err;
-		freq = omap2_onenand_get_freq(cfg, onenand_base, &clk_dep);
-		first_time = 1;
-	}
+	if (cfg->flags & ONENAND_SYNC_READ)
+		onenand_flags = ONENAND_FLAG_SYNCREAD;
+	else if (cfg->flags & ONENAND_SYNC_READWRITE)
+		onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE;
 
 	switch (freq) {
 	case 104:
@@ -244,44 +227,31 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 		t_ach   = 9;
 		t_aavdh = 7;
 		t_rdyo  = 15;
-		sync_write = 0;
+		onenand_flags &= ~ONENAND_FLAG_SYNCWRITE;
 		break;
 	}
 
-	div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
+	div = gpmc_calc_divider(min_gpmc_clk_period);
 	gpmc_clk_ns = gpmc_ticks_to_ns(div);
 	if (gpmc_clk_ns < 15) /* >66Mhz */
-		hf = 1;
+		onenand_flags |= ONENAND_FLAG_HF;
+	else
+		onenand_flags &= ~ONENAND_FLAG_HF;
 	if (gpmc_clk_ns < 12) /* >83Mhz */
-		vhf = 1;
-	if (vhf)
+		onenand_flags |= ONENAND_FLAG_VHF;
+	else
+		onenand_flags &= ~ONENAND_FLAG_VHF;
+	if (onenand_flags & ONENAND_FLAG_VHF)
 		latency = 8;
-	else if (hf)
+	else if (onenand_flags & ONENAND_FLAG_HF)
 		latency = 6;
 	else if (gpmc_clk_ns >= 25) /* 40 MHz*/
 		latency = 3;
 	else
 		latency = 4;
 
-	if (clk_dep) {
-		if (gpmc_clk_ns < 12) { /* >83Mhz */
-			t_ces   = 3;
-			t_avds  = 4;
-		} else if (gpmc_clk_ns < 15) { /* >66Mhz */
-			t_ces   = 5;
-			t_avds  = 4;
-		} else if (gpmc_clk_ns < 25) { /* >40Mhz */
-			t_ces   = 6;
-			t_avds  = 5;
-		} else {
-			t_ces   = 7;
-			t_avds  = 7;
-		}
-	}
-
-	if (first_time)
-		set_onenand_cfg(onenand_base, latency,
-					sync_read, sync_write, hf, vhf);
+	/* Set synchronous read timings */
+	memset(&t, 0, sizeof(t));
 
 	if (div == 1) {
 		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
@@ -307,8 +277,6 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
 	}
 
-	/* Set synchronous read timings */
-	memset(&t, 0, sizeof(t));
 	t.sync_clk = min_gpmc_clk_period;
 	t.cs_on = 0;
 	t.adv_on = 0;
@@ -330,7 +298,7 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 		     ticks_cez);
 
 	/* Write */
-	if (sync_write) {
+	if (onenand_flags & ONENAND_FLAG_SYNCWRITE) {
 		t.adv_wr_off = t.adv_rd_off;
 		t.we_on  = 0;
 		t.we_off = t.cs_rd_off;
@@ -355,6 +323,14 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 		}
 	}
 
+	return t;
+}
+
+static int gpmc_set_sync_mode(int cs, struct gpmc_timings *t)
+{
+	unsigned sync_read = onenand_flags & ONENAND_FLAG_SYNCREAD;
+	unsigned sync_write = onenand_flags & ONENAND_FLAG_SYNCWRITE;
+
 	/* Configure GPMC for synchronous read */
 	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
 			  GPMC_CONFIG1_WRAPBURST_SUPP |
@@ -371,11 +347,45 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 			  GPMC_CONFIG1_DEVICETYPE_NOR |
 			  GPMC_CONFIG1_MUXADDDATA);
 
-	err = gpmc_cs_set_timings(cs, &t);
-	if (err)
-		return err;
+	return gpmc_cs_set_timings(cs, t);
+}
+
+static int omap2_onenand_setup_async(void __iomem *onenand_base)
+{
+	struct gpmc_timings t;
+	int ret;
+
+	omap2_onenand_set_async_mode(onenand_base);
 
-	set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf, vhf);
+	t = omap2_onenand_calc_async_timings();
+
+	ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t);
+	if (IS_ERR_VALUE(ret))
+		return ret;
+
+	omap2_onenand_set_async_mode(onenand_base);
+
+	return 0;
+}
+
+static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr)
+{
+	int ret, freq = *freq_ptr;
+	struct gpmc_timings t;
+
+	if (!freq) {
+		/* Very first call freq is not known */
+		freq = omap2_onenand_get_freq(gpmc_onenand_data, onenand_base);
+		set_onenand_cfg(onenand_base);
+	}
+
+	t = omap2_onenand_calc_sync_timings(gpmc_onenand_data, freq);
+
+	ret = gpmc_set_sync_mode(gpmc_onenand_data->cs, &t);
+	if (IS_ERR_VALUE(ret))
+		return ret;
+
+	set_onenand_cfg(onenand_base);
 
 	*freq_ptr = freq;
 
@@ -385,15 +395,22 @@ static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
 static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr)
 {
 	struct device *dev = &gpmc_onenand_device.dev;
+	unsigned l = ONENAND_SYNC_READ | ONENAND_SYNC_READWRITE;
+	int ret;
 
-	/* Set sync timings in GPMC */
-	if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base,
-			freq_ptr) < 0) {
-		dev_err(dev, "Unable to set synchronous mode\n");
-		return -EINVAL;
+	ret = omap2_onenand_setup_async(onenand_base);
+	if (ret) {
+		dev_err(dev, "unable to set to async mode\n");
+		return ret;
 	}
 
-	return 0;
+	if (!(gpmc_onenand_data->flags & l))
+		return 0;
+
+	ret = omap2_onenand_setup_sync(onenand_base, freq_ptr);
+	if (ret)
+		dev_err(dev, "unable to set to sync mode\n");
+	return ret;
 }
 
 void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
@@ -411,6 +428,11 @@ void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
 		gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
 	}
 
+	if (cpu_is_omap34xx())
+		gpmc_onenand_data->flags |= ONENAND_IN_OMAP34XX;
+	else
+		gpmc_onenand_data->flags &= ~ONENAND_IN_OMAP34XX;
+
 	err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE,
 				(unsigned long *)&gpmc_onenand_resource.start);
 	if (err < 0) {

arch/arm/mach-omap2/gpmc-onenand.h

+/*
+ *  arch/arm/mach-omap2/gpmc-onenand.h
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#ifndef	__OMAP2_GPMC_ONENAND_H
+#define	__OMAP2_GPMC_ONENAND_H
+
+#include <linux/platform_data/mtd-onenand-omap2.h>
+
+#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+#else
+#define board_onenand_data	NULL
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+#endif
+
+#endif

arch/arm/mach-omap2/gpmc-smc91x.c

@@ -17,7 +17,7 @@
 #include <linux/io.h>
 #include <linux/smc91x.h>
 
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "gpmc-smc91x.h"
 
 #include "soc.h"

arch/arm/mach-omap2/gpmc-smsc911x.c

@@ -20,7 +20,7 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include "gpmc-smsc911x.h"
 
 static struct resource gpmc_smsc911x_resources[] = {

arch/arm/mach-omap2/gpmc.c

@@ -26,16 +26,17 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 
+#include <linux/platform_data/mtd-nand-omap2.h>
+
 #include <asm/mach-types.h>
-#include <plat/gpmc.h>
 
 #include <plat/cpu.h>
-#include <plat/gpmc.h>
 #include <plat/sdrc.h>
 #include <plat/omap_device.h>
 
 #include "soc.h"
 #include "common.h"
+#include "gpmc.h"
 
 #define	DEVICE_NAME		"omap-gpmc"
 
@@ -59,6 +60,9 @@
 #define GPMC_ECC_SIZE_CONFIG	0x1fc
 #define GPMC_ECC1_RESULT        0x200
 #define GPMC_ECC_BCH_RESULT_0   0x240   /* not available on OMAP2 */
+#define	GPMC_ECC_BCH_RESULT_1	0x244	/* not available on OMAP2 */
+#define	GPMC_ECC_BCH_RESULT_2	0x248	/* not available on OMAP2 */
+#define	GPMC_ECC_BCH_RESULT_3	0x24c	/* not available on OMAP2 */
 
 /* GPMC ECC control settings */
 #define GPMC_ECC_CTRL_ECCCLEAR		0x100
@@ -75,6 +79,7 @@
 
 #define GPMC_CS0_OFFSET		0x60
 #define GPMC_CS_SIZE		0x30
+#define	GPMC_BCH_SIZE		0x10
 
 #define GPMC_MEM_START		0x00000000
 #define GPMC_MEM_END		0x3FFFFFFF
@@ -137,7 +142,6 @@ static struct resource	gpmc_mem_root;
 static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
 static unsigned int gpmc_cs_map;	/* flag for cs which are initialized */
-static int gpmc_ecc_used = -EINVAL;	/* cs using ecc engine */
 static struct device *gpmc_dev;
 static int gpmc_irq;
 static resource_size_t phys_base, mem_size;
@@ -158,22 +162,6 @@ static u32 gpmc_read_reg(int idx)
 	return __raw_readl(gpmc_base + idx);
 }
 
-static void gpmc_cs_write_byte(int cs, int idx, u8 val)
-{
-	void __iomem *reg_addr;
-
-	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
-	__raw_writeb(val, reg_addr);
-}
-
-static u8 gpmc_cs_read_byte(int cs, int idx)
-{
-	void __iomem *reg_addr;
-
-	reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
-	return __raw_readb(reg_addr);
-}
-
 void gpmc_cs_write_reg(int cs, int idx, u32 val)
 {
 	void __iomem *reg_addr;
@@ -288,7 +276,7 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
 		return -1
 #endif
 
-int gpmc_cs_calc_divider(int cs, unsigned int sync_clk)
+int gpmc_calc_divider(unsigned int sync_clk)
 {
 	int div;
 	u32 l;
@@ -308,7 +296,7 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
 	int div;
 	u32 l;
 
-	div = gpmc_cs_calc_divider(cs, t->sync_clk);
+	div = gpmc_calc_divider(t->sync_clk);
 	if (div < 0)
 		return div;
 
@@ -508,44 +496,6 @@ void gpmc_cs_free(int cs)
 }
 EXPORT_SYMBOL(gpmc_cs_free);
 
-/**
- * gpmc_read_status - read access request to get the different gpmc status
- * @cmd: command type
- * @return status
- */
-int gpmc_read_status(int cmd)
-{
-	int	status = -EINVAL;
-	u32	regval = 0;
-
-	switch (cmd) {
-	case GPMC_GET_IRQ_STATUS:
-		status = gpmc_read_reg(GPMC_IRQSTATUS);
-		break;
-
-	case GPMC_PREFETCH_FIFO_CNT:
-		regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
-		status = GPMC_PREFETCH_STATUS_FIFO_CNT(regval);
-		break;
-
-	case GPMC_PREFETCH_COUNT:
-		regval = gpmc_read_reg(GPMC_PREFETCH_STATUS);
-		status = GPMC_PREFETCH_STATUS_COUNT(regval);
-		break;
-
-	case GPMC_STATUS_BUFFER:
-		regval = gpmc_read_reg(GPMC_STATUS);
-		/* 1 : buffer is available to write */
-		status = regval & GPMC_STATUS_BUFF_EMPTY;
-		break;
-
-	default:
-		printk(KERN_ERR "gpmc_read_status: Not supported\n");
-	}
-	return status;
-}
-EXPORT_SYMBOL(gpmc_read_status);
-
 /**
  * gpmc_cs_configure - write request to configure gpmc
  * @cs: chip select number
@@ -614,121 +564,10 @@ int gpmc_cs_configure(int cs, int cmd, int wval)
 }
 EXPORT_SYMBOL(gpmc_cs_configure);
 
-/**
- * gpmc_nand_read - nand specific read access request
- * @cs: chip select number
- * @cmd: command type
- */
-int gpmc_nand_read(int cs, int cmd)
-{
-	int rval = -EINVAL;
-
-	switch (cmd) {
-	case GPMC_NAND_DATA:
-		rval = gpmc_cs_read_byte(cs, GPMC_CS_NAND_DATA);
-		break;
-
-	default:
-		printk(KERN_ERR "gpmc_read_nand_ctrl: Not supported\n");
-	}
-	return rval;
-}
-EXPORT_SYMBOL(gpmc_nand_read);
-
-/**
- * gpmc_nand_write - nand specific write request
- * @cs: chip select number
- * @cmd: command type
- * @wval: value to write
- */
-int gpmc_nand_write(int cs, int cmd, int wval)
-{
-	int err = 0;
-
-	switch (cmd) {
-	case GPMC_NAND_COMMAND:
-		gpmc_cs_write_byte(cs, GPMC_CS_NAND_COMMAND, wval);
-		break;
-
-	case GPMC_NAND_ADDRESS:
-		gpmc_cs_write_byte(cs, GPMC_CS_NAND_ADDRESS, wval);
-		break;
-
-	case GPMC_NAND_DATA:
-		gpmc_cs_write_byte(cs, GPMC_CS_NAND_DATA, wval);
-
-	default:
-		printk(KERN_ERR "gpmc_write_nand_ctrl: Not supported\n");
-		err = -EINVAL;
-	}
-	return err;
-}
-EXPORT_SYMBOL(gpmc_nand_write);
-
-
-
-/**
- * gpmc_prefetch_enable - configures and starts prefetch transfer
- * @cs: cs (chip select) number
- * @fifo_th: fifo threshold to be used for read/ write
- * @dma_mode: dma mode enable (1) or disable (0)
- * @u32_count: number of bytes to be transferred
- * @is_write: prefetch read(0) or write post(1) mode
- */
-int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
-				unsigned int u32_count, int is_write)
-{
-
-	if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX) {
-		pr_err("gpmc: fifo threshold is not supported\n");
-		return -1;
-	} else if (!(gpmc_read_reg(GPMC_PREFETCH_CONTROL))) {
-		/* Set the amount of bytes to be prefetched */
-		gpmc_write_reg(GPMC_PREFETCH_CONFIG2, u32_count);
-
-		/* Set dma/mpu mode, the prefetch read / post write and
-		 * enable the engine. Set which cs is has requested for.
-		 */
-		gpmc_write_reg(GPMC_PREFETCH_CONFIG1, ((cs << CS_NUM_SHIFT) |
-					PREFETCH_FIFOTHRESHOLD(fifo_th) |
-					ENABLE_PREFETCH |
-					(dma_mode << DMA_MPU_MODE) |
-					(0x1 & is_write)));
-
-		/*  Start the prefetch engine */
-		gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x1);
-	} else {
-		return -EBUSY;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL(gpmc_prefetch_enable);
-
-/**
- * gpmc_prefetch_reset - disables and stops the prefetch engine
- */
-int gpmc_prefetch_reset(int cs)
-{
-	u32 config1;
-
-	/* check if the same module/cs is trying to reset */
-	config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
-	if (((config1 >> CS_NUM_SHIFT) & 0x7) != cs)
-		return -EINVAL;
-
-	/* Stop the PFPW engine */
-	gpmc_write_reg(GPMC_PREFETCH_CONTROL, 0x0);
-
-	/* Reset/disable the PFPW engine */
-	gpmc_write_reg(GPMC_PREFETCH_CONFIG1, 0x0);
-
-	return 0;
-}
-EXPORT_SYMBOL(gpmc_prefetch_reset);
-
 void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
 {
+	int i;
+
 	reg->gpmc_status = gpmc_base + GPMC_STATUS;
 	reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
 				GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
@@ -744,7 +583,17 @@ void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
 	reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL;
 	reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG;
 	reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT;
-	reg->gpmc_bch_result0 = gpmc_base + GPMC_ECC_BCH_RESULT_0;
+
+	for (i = 0; i < GPMC_BCH_NUM_REMAINDER; i++) {
+		reg->gpmc_bch_result0[i] = gpmc_base + GPMC_ECC_BCH_RESULT_0 +
+					   GPMC_BCH_SIZE * i;
+		reg->gpmc_bch_result1[i] = gpmc_base + GPMC_ECC_BCH_RESULT_1 +
+					   GPMC_BCH_SIZE * i;
+		reg->gpmc_bch_result2[i] = gpmc_base + GPMC_ECC_BCH_RESULT_2 +
+					   GPMC_BCH_SIZE * i;
+		reg->gpmc_bch_result3[i] = gpmc_base + GPMC_ECC_BCH_RESULT_3 +
+					   GPMC_BCH_SIZE * i;
+	}
 }
 
 int gpmc_get_client_irq(unsigned irq_config)
@@ -1079,267 +928,3 @@ void omap3_gpmc_restore_context(void)
 	}
 }
 #endif /* CONFIG_ARCH_OMAP3 */
-
-/**
- * gpmc_enable_hwecc - enable hardware ecc functionality
- * @cs: chip select number
- * @mode: read/write mode
- * @dev_width: device bus width(1 for x16, 0 for x8)
- * @ecc_size: bytes for which ECC will be generated
- */
-int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size)
-{
-	unsigned int val;
-
-	/* check if ecc module is in used */
-	if (gpmc_ecc_used != -EINVAL)
-		return -EINVAL;
-
-	gpmc_ecc_used = cs;
-
-	/* clear ecc and enable bits */
-	gpmc_write_reg(GPMC_ECC_CONTROL,
-			GPMC_ECC_CTRL_ECCCLEAR |
-			GPMC_ECC_CTRL_ECCREG1);
-
-	/* program ecc and result sizes */
-	val = ((((ecc_size >> 1) - 1) << 22) | (0x0000000F));
-	gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, val);
-
-	switch (mode) {
-	case GPMC_ECC_READ:
-	case GPMC_ECC_WRITE:
-		gpmc_write_reg(GPMC_ECC_CONTROL,
-				GPMC_ECC_CTRL_ECCCLEAR |
-				GPMC_ECC_CTRL_ECCREG1);
-		break;
-	case GPMC_ECC_READSYN:
-		gpmc_write_reg(GPMC_ECC_CONTROL,
-				GPMC_ECC_CTRL_ECCCLEAR |
-				GPMC_ECC_CTRL_ECCDISABLE);
-		break;
-	default:
-		printk(KERN_INFO "Error: Unrecognized Mode[%d]!\n", mode);
-		break;
-	}
-
-	/* (ECC 16 or 8 bit col) | ( CS  )  | ECC Enable */
-	val = (dev_width << 7) | (cs << 1) | (0x1);
-	gpmc_write_reg(GPMC_ECC_CONFIG, val);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_enable_hwecc);
-
-/**
- * gpmc_calculate_ecc - generate non-inverted ecc bytes
- * @cs: chip select number
- * @dat: data pointer over which ecc is computed
- * @ecc_code: ecc code buffer
- *
- * Using non-inverted ECC is considered ugly since writing a blank
- * page (padding) will clear the ECC bytes. This is not a problem as long
- * no one is trying to write data on the seemingly unused page. Reading
- * an erased page will produce an ECC mismatch between generated and read
- * ECC bytes that has to be dealt with separately.
- */
-int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code)
-{
-	unsigned int val = 0x0;
-
-	if (gpmc_ecc_used != cs)
-		return -EINVAL;
-
-	/* read ecc result */
-	val = gpmc_read_reg(GPMC_ECC1_RESULT);
-	*ecc_code++ = val;          /* P128e, ..., P1e */
-	*ecc_code++ = val >> 16;    /* P128o, ..., P1o */
-	/* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
-	*ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
-
-	gpmc_ecc_used = -EINVAL;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc);
-
-#ifdef CONFIG_ARCH_OMAP3
-
-/**
- * gpmc_init_hwecc_bch - initialize hardware BCH ecc functionality
- * @cs: chip select number
- * @nsectors: how many 512-byte sectors to process
- * @nerrors: how many errors to correct per sector (4 or 8)
- *
- * This function must be executed before any call to gpmc_enable_hwecc_bch.
- */
-int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors)
-{
-	/* check if ecc module is in use */
-	if (gpmc_ecc_used != -EINVAL)
-		return -EINVAL;
-
-	/* support only OMAP3 class */
-	if (!cpu_is_omap34xx()) {
-		printk(KERN_ERR "BCH ecc is not supported on this CPU\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * For now, assume 4-bit mode is only supported on OMAP3630 ES1.x, x>=1.
-	 * Other chips may be added if confirmed to work.
-	 */
-	if ((nerrors == 4) &&
-	    (!cpu_is_omap3630() || (GET_OMAP_REVISION() == 0))) {
-		printk(KERN_ERR "BCH 4-bit mode is not supported on this CPU\n");
-		return -EINVAL;
-	}
-
-	/* sanity check */
-	if (nsectors > 8) {
-		printk(KERN_ERR "BCH cannot process %d sectors (max is 8)\n",
-		       nsectors);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_init_hwecc_bch);
-
-/**
- * gpmc_enable_hwecc_bch - enable hardware BCH ecc functionality
- * @cs: chip select number
- * @mode: read/write mode
- * @dev_width: device bus width(1 for x16, 0 for x8)
- * @nsectors: how many 512-byte sectors to process
- * @nerrors: how many errors to correct per sector (4 or 8)
- */
-int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
-			  int nerrors)
-{
-	unsigned int val;
-
-	/* check if ecc module is in use */
-	if (gpmc_ecc_used != -EINVAL)
-		return -EINVAL;
-
-	gpmc_ecc_used = cs;
-
-	/* clear ecc and enable bits */
-	gpmc_write_reg(GPMC_ECC_CONTROL, 0x1);
-
-	/*
-	 * When using BCH, sector size is hardcoded to 512 bytes.
-	 * Here we are using wrapping mode 6 both for reading and writing, with:
-	 *  size0 = 0  (no additional protected byte in spare area)
-	 *  size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
-	 */
-	gpmc_write_reg(GPMC_ECC_SIZE_CONFIG, (32 << 22) | (0 << 12));
-
-	/* BCH configuration */
-	val = ((1                        << 16) | /* enable BCH */
-	       (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
-	       (0x06                     <<  8) | /* wrap mode = 6 */
-	       (dev_width                <<  7) | /* bus width */
-	       (((nsectors-1) & 0x7)     <<  4) | /* number of sectors */
-	       (cs                       <<  1) | /* ECC CS */
-	       (0x1));                            /* enable ECC */
-
-	gpmc_write_reg(GPMC_ECC_CONFIG, val);
-	gpmc_write_reg(GPMC_ECC_CONTROL, 0x101);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_enable_hwecc_bch);
-
-/**
- * gpmc_calculate_ecc_bch4 - Generate 7 ecc bytes per sector of 512 data bytes
- * @cs:  chip select number
- * @dat: The pointer to data on which ecc is computed
- * @ecc: The ecc output buffer
- */
-int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc)
-{
-	int i;
-	unsigned long nsectors, reg, val1, val2;
-
-	if (gpmc_ecc_used != cs)
-		return -EINVAL;
-
-	nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
-
-	for (i = 0; i < nsectors; i++) {
-
-		reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
-
-		/* Read hw-computed remainder */
-		val1 = gpmc_read_reg(reg + 0);
-		val2 = gpmc_read_reg(reg + 4);
-
-		/*
-		 * Add constant polynomial to remainder, in order to get an ecc
-		 * sequence of 0xFFs for a buffer filled with 0xFFs; and
-		 * left-justify the resulting polynomial.
-		 */
-		*ecc++ = 0x28 ^ ((val2 >> 12) & 0xFF);
-		*ecc++ = 0x13 ^ ((val2 >>  4) & 0xFF);
-		*ecc++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
-		*ecc++ = 0x39 ^ ((val1 >> 20) & 0xFF);
-		*ecc++ = 0x96 ^ ((val1 >> 12) & 0xFF);
-		*ecc++ = 0xac ^ ((val1 >> 4) & 0xFF);
-		*ecc++ = 0x7f ^ ((val1 & 0xF) << 4);
-	}
-
-	gpmc_ecc_used = -EINVAL;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch4);
-
-/**
- * gpmc_calculate_ecc_bch8 - Generate 13 ecc bytes per block of 512 data bytes
- * @cs:  chip select number
- * @dat: The pointer to data on which ecc is computed
- * @ecc: The ecc output buffer
- */
-int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc)
-{
-	int i;
-	unsigned long nsectors, reg, val1, val2, val3, val4;
-
-	if (gpmc_ecc_used != cs)
-		return -EINVAL;
-
-	nsectors = ((gpmc_read_reg(GPMC_ECC_CONFIG) >> 4) & 0x7) + 1;
-
-	for (i = 0; i < nsectors; i++) {
-
-		reg = GPMC_ECC_BCH_RESULT_0 + 16*i;
-
-		/* Read hw-computed remainder */
-		val1 = gpmc_read_reg(reg + 0);
-		val2 = gpmc_read_reg(reg + 4);
-		val3 = gpmc_read_reg(reg + 8);
-		val4 = gpmc_read_reg(reg + 12);
-
-		/*
-		 * Add constant polynomial to remainder, in order to get an ecc
-		 * sequence of 0xFFs for a buffer filled with 0xFFs.
-		 */
-		*ecc++ = 0xef ^ (val4 & 0xFF);
-		*ecc++ = 0x51 ^ ((val3 >> 24) & 0xFF);
-		*ecc++ = 0x2e ^ ((val3 >> 16) & 0xFF);
-		*ecc++ = 0x09 ^ ((val3 >> 8) & 0xFF);
-		*ecc++ = 0xed ^ (val3 & 0xFF);
-		*ecc++ = 0x93 ^ ((val2 >> 24) & 0xFF);
-		*ecc++ = 0x9a ^ ((val2 >> 16) & 0xFF);
-		*ecc++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
-		*ecc++ = 0x97 ^ (val2 & 0xFF);
-		*ecc++ = 0x79 ^ ((val1 >> 24) & 0xFF);
-		*ecc++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
-		*ecc++ = 0x24 ^ ((val1 >> 8) & 0xFF);
-		*ecc++ = 0xb5 ^ (val1 & 0xFF);
-	}
-
-	gpmc_ecc_used = -EINVAL;
-	return 0;
-}
-EXPORT_SYMBOL_GPL(gpmc_calculate_ecc_bch8);
-
-#endif /* CONFIG_ARCH_OMAP3 */

arch/arm/plat-omap/include/plat/gpmc.h → arch/arm/mach-omap2/gpmc.h

@@ -11,6 +11,8 @@
 #ifndef __OMAP2_GPMC_H
 #define __OMAP2_GPMC_H
 
+#include <linux/platform_data/mtd-nand-omap2.h>
+
 /* Maximum Number of Chip Selects */
 #define GPMC_CS_NUM		8
 
@@ -32,15 +34,6 @@
 #define GPMC_SET_IRQ_STATUS	0x00000004
 #define GPMC_CONFIG_WP		0x00000005
 
-#define GPMC_GET_IRQ_STATUS	0x00000006
-#define GPMC_PREFETCH_FIFO_CNT	0x00000007 /* bytes available in FIFO for r/w */
-#define GPMC_PREFETCH_COUNT	0x00000008 /* remaining bytes to be read/write*/
-#define GPMC_STATUS_BUFFER	0x00000009 /* 1: buffer is available to write */
-
-#define GPMC_NAND_COMMAND	0x0000000a
-#define GPMC_NAND_ADDRESS	0x0000000b
-#define GPMC_NAND_DATA		0x0000000c
-
 #define GPMC_ENABLE_IRQ		0x0000000d
 
 /* ECC commands */
@@ -76,25 +69,10 @@
 #define GPMC_DEVICETYPE_NOR		0
 #define GPMC_DEVICETYPE_NAND		2
 #define GPMC_CONFIG_WRITEPROTECT	0x00000010
-#define GPMC_STATUS_BUFF_EMPTY		0x00000001
 #define WR_RD_PIN_MONITORING		0x00600000
-#define GPMC_PREFETCH_STATUS_FIFO_CNT(val)	((val >> 24) & 0x7F)
-#define GPMC_PREFETCH_STATUS_COUNT(val)	(val & 0x00003fff)
 #define GPMC_IRQ_FIFOEVENTENABLE	0x01
 #define GPMC_IRQ_COUNT_EVENT		0x02
 
-#define PREFETCH_FIFOTHRESHOLD_MAX	0x40
-#define PREFETCH_FIFOTHRESHOLD(val)	((val) << 8)
-
-enum omap_ecc {
-		/* 1-bit ecc: stored at end of spare area */
-	OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
-	OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
-		/* 1-bit ecc: stored at beginning of spare area as romcode */
-	OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
-	OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
-	OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
-};
 
 /*
  * Note that all values in this struct are in nanoseconds except sync_clk
@@ -133,22 +111,6 @@ struct gpmc_timings {
 	u16 wr_data_mux_bus;	/* WRDATAONADMUXBUS */
 };
 
-struct gpmc_nand_regs {
-	void __iomem	*gpmc_status;
-	void __iomem	*gpmc_nand_command;
-	void __iomem	*gpmc_nand_address;
-	void __iomem	*gpmc_nand_data;
-	void __iomem	*gpmc_prefetch_config1;
-	void __iomem	*gpmc_prefetch_config2;
-	void __iomem	*gpmc_prefetch_control;
-	void __iomem	*gpmc_prefetch_status;
-	void __iomem	*gpmc_ecc_config;
-	void __iomem	*gpmc_ecc_control;
-	void __iomem	*gpmc_ecc_size_config;
-	void __iomem	*gpmc_ecc1_result;
-	void __iomem	*gpmc_bch_result0;
-};
-
 extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
 extern int gpmc_get_client_irq(unsigned irq_config);
 
@@ -160,31 +122,14 @@ extern unsigned long gpmc_get_fclk_period(void);
 
 extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
 extern u32 gpmc_cs_read_reg(int cs, int idx);
-extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
+extern int gpmc_calc_divider(unsigned int sync_clk);
 extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
 extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
 extern void gpmc_cs_free(int cs);
 extern int gpmc_cs_set_reserved(int cs, int reserved);
 extern int gpmc_cs_reserved(int cs);
-extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
-					unsigned int u32_count, int is_write);
-extern int gpmc_prefetch_reset(int cs);
 extern void omap3_gpmc_save_context(void);
 extern void omap3_gpmc_restore_context(void);
-extern int gpmc_read_status(int cmd);
 extern int gpmc_cs_configure(int cs, int cmd, int wval);
-extern int gpmc_nand_read(int cs, int cmd);
-extern int gpmc_nand_write(int cs, int cmd, int wval);
-
-int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
-int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
-
-#ifdef CONFIG_ARCH_OMAP3
-int gpmc_init_hwecc_bch(int cs, int nsectors, int nerrors);
-int gpmc_enable_hwecc_bch(int cs, int mode, int dev_width, int nsectors,
-			  int nerrors);
-int gpmc_calculate_ecc_bch4(int cs, const u_char *dat, u_char *ecc);
-int gpmc_calculate_ecc_bch8(int cs, const u_char *dat, u_char *ecc);
-#endif /* CONFIG_ARCH_OMAP3 */
 
 #endif

arch/arm/mach-omap2/pm34xx.c

@@ -40,7 +40,7 @@
 #include "powerdomain.h"
 #include <plat/sdrc.h>
 #include <plat/prcm.h>
-#include <plat/gpmc.h>
+#include "gpmc.h"
 #include <plat/dma.h>
 
 #include "common.h"

arch/arm/mach-omap2/usb-tusb6010.c

@@ -18,7 +18,7 @@
 
 #include <linux/usb/musb.h>
 
-#include <plat/gpmc.h>
+#include "gpmc.h"
 
 #include "mux.h"
 

drivers/mtd/nand/omap2.c

@@ -28,7 +28,6 @@
 #endif
 
 #include <plat/dma.h>
-#include <plat/gpmc.h>
 #include <linux/platform_data/mtd-nand-omap2.h>
 
 #define	DRIVER_NAME	"omap2-nand"
@@ -106,10 +105,16 @@
 #define	CS_MASK				0x7
 #define	ENABLE_PREFETCH			(0x1 << 7)
 #define	DMA_MPU_MODE_SHIFT		2
+#define	ECCSIZE0_SHIFT			12
 #define	ECCSIZE1_SHIFT			22
 #define	ECC1RESULTSIZE			0x1
 #define	ECCCLEAR			0x100
 #define	ECC1				0x1
+#define	PREFETCH_FIFOTHRESHOLD_MAX	0x40
+#define	PREFETCH_FIFOTHRESHOLD(val)	((val) << 8)
+#define	PREFETCH_STATUS_COUNT(val)	(val & 0x00003fff)
+#define	PREFETCH_STATUS_FIFO_CNT(val)	((val >> 24) & 0x7F)
+#define	STATUS_BUFF_EMPTY		0x00000001
 
 /* oob info generated runtime depending on ecc algorithm and layout selected */
 static struct nand_ecclayout omap_oobinfo;
@@ -269,7 +274,7 @@ static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
 		/* wait until buffer is available for write */
 		do {
 			status = readl(info->reg.gpmc_status) &
-					GPMC_STATUS_BUFF_EMPTY;
+					STATUS_BUFF_EMPTY;
 		} while (!status);
 	}
 }
@@ -307,7 +312,7 @@ static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
 		/* wait until buffer is available for write */
 		do {
 			status = readl(info->reg.gpmc_status) &
-					GPMC_STATUS_BUFF_EMPTY;
+					STATUS_BUFF_EMPTY;
 		} while (!status);
 	}
 }
@@ -348,7 +353,7 @@ static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
 	} else {
 		do {
 			r_count = readl(info->reg.gpmc_prefetch_status);
-			r_count = GPMC_PREFETCH_STATUS_FIFO_CNT(r_count);
+			r_count = PREFETCH_STATUS_FIFO_CNT(r_count);
 			r_count = r_count >> 2;
 			ioread32_rep(info->nand.IO_ADDR_R, p, r_count);
 			p += r_count;
@@ -395,7 +400,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
 	} else {
 		while (len) {
 			w_count = readl(info->reg.gpmc_prefetch_status);
-			w_count = GPMC_PREFETCH_STATUS_FIFO_CNT(w_count);
+			w_count = PREFETCH_STATUS_FIFO_CNT(w_count);
 			w_count = w_count >> 1;
 			for (i = 0; (i < w_count) && len; i++, len -= 2)
 				iowrite16(*p++, info->nand.IO_ADDR_W);
@@ -407,7 +412,7 @@ static void omap_write_buf_pref(struct mtd_info *mtd,
 		do {
 			cpu_relax();
 			val = readl(info->reg.gpmc_prefetch_status);
-			val = GPMC_PREFETCH_STATUS_COUNT(val);
+			val = PREFETCH_STATUS_COUNT(val);
 		} while (val && (tim++ < limit));
 
 		/* disable and stop the PFPW engine */
@@ -493,7 +498,7 @@ static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
 	do {
 		cpu_relax();
 		val = readl(info->reg.gpmc_prefetch_status);
-		val = GPMC_PREFETCH_STATUS_COUNT(val);
+		val = PREFETCH_STATUS_COUNT(val);
 	} while (val && (tim++ < limit));
 
 	/* disable and stop the PFPW engine */
@@ -556,7 +561,7 @@ static irqreturn_t omap_nand_irq(int this_irq, void *dev)
 	u32 bytes;
 
 	bytes = readl(info->reg.gpmc_prefetch_status);
-	bytes = GPMC_PREFETCH_STATUS_FIFO_CNT(bytes);
+	bytes = PREFETCH_STATUS_FIFO_CNT(bytes);
 	bytes = bytes  & 0xFFFC; /* io in multiple of 4 bytes */
 	if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */
 		if (this_irq == info->gpmc_irq_count)
@@ -682,7 +687,7 @@ static void omap_write_buf_irq_pref(struct mtd_info *mtd,
 	limit = (loops_per_jiffy *  msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
 	do {
 		val = readl(info->reg.gpmc_prefetch_status);
-		val = GPMC_PREFETCH_STATUS_COUNT(val);
+		val = PREFETCH_STATUS_COUNT(val);
 		cpu_relax();
 	} while (val && (tim++ < limit));
 
@@ -996,7 +1001,7 @@ static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
 		cond_resched();
 	}
 
-	status = gpmc_nand_read(info->gpmc_cs, GPMC_NAND_DATA);
+	status = readb(info->reg.gpmc_nand_data);
 	return status;
 }
 
@@ -1029,19 +1034,45 @@ static int omap_dev_ready(struct mtd_info *mtd)
 static void omap3_enable_hwecc_bch(struct mtd_info *mtd, int mode)
 {
 	int nerrors;
-	unsigned int dev_width;
+	unsigned int dev_width, nsectors;
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 						   mtd);
 	struct nand_chip *chip = mtd->priv;
+	u32 val;
 
 	nerrors = (info->nand.ecc.bytes == 13) ? 8 : 4;
 	dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+	nsectors = 1;
 	/*
 	 * Program GPMC to perform correction on one 512-byte sector at a time.
 	 * Using 4 sectors at a time (i.e. ecc.size = 2048) is also possible and
 	 * gives a slight (5%) performance gain (but requires additional code).
 	 */
-	(void)gpmc_enable_hwecc_bch(info->gpmc_cs, mode, dev_width, 1, nerrors);
+
+	writel(ECC1, info->reg.gpmc_ecc_control);
+
+	/*
+	 * When using BCH, sector size is hardcoded to 512 bytes.
+	 * Here we are using wrapping mode 6 both for reading and writing, with:
+	 *  size0 = 0  (no additional protected byte in spare area)
+	 *  size1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
+	 */
+	val = (32 << ECCSIZE1_SHIFT) | (0 << ECCSIZE0_SHIFT);
+	writel(val, info->reg.gpmc_ecc_size_config);
+
+	/* BCH configuration */
+	val = ((1                        << 16) | /* enable BCH */
+	       (((nerrors == 8) ? 1 : 0) << 12) | /* 8 or 4 bits */
+	       (0x06                     <<  8) | /* wrap mode = 6 */
+	       (dev_width                <<  7) | /* bus width */
+	       (((nsectors-1) & 0x7)     <<  4) | /* number of sectors */
+	       (info->gpmc_cs            <<  1) | /* ECC CS */
+	       (0x1));                            /* enable ECC */
+
+	writel(val, info->reg.gpmc_ecc_config);
+
+	/* clear ecc and enable bits */
+	writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
 }
 
 /**
@@ -1055,7 +1086,32 @@ static int omap3_calculate_ecc_bch4(struct mtd_info *mtd, const u_char *dat,
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 						   mtd);
-	return gpmc_calculate_ecc_bch4(info->gpmc_cs, dat, ecc_code);
+	unsigned long nsectors, val1, val2;
+	int i;
+
+	nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+
+	for (i = 0; i < nsectors; i++) {
+
+		/* Read hw-computed remainder */
+		val1 = readl(info->reg.gpmc_bch_result0[i]);
+		val2 = readl(info->reg.gpmc_bch_result1[i]);
+
+		/*
+		 * Add constant polynomial to remainder, in order to get an ecc
+		 * sequence of 0xFFs for a buffer filled with 0xFFs; and
+		 * left-justify the resulting polynomial.
+		 */
+		*ecc_code++ = 0x28 ^ ((val2 >> 12) & 0xFF);
+		*ecc_code++ = 0x13 ^ ((val2 >>  4) & 0xFF);
+		*ecc_code++ = 0xcc ^ (((val2 & 0xF) << 4)|((val1 >> 28) & 0xF));
+		*ecc_code++ = 0x39 ^ ((val1 >> 20) & 0xFF);
+		*ecc_code++ = 0x96 ^ ((val1 >> 12) & 0xFF);
+		*ecc_code++ = 0xac ^ ((val1 >> 4) & 0xFF);
+		*ecc_code++ = 0x7f ^ ((val1 & 0xF) << 4);
+	}
+
+	return 0;
 }
 
 /**
@@ -1069,7 +1125,39 @@ static int omap3_calculate_ecc_bch8(struct mtd_info *mtd, const u_char *dat,
 {
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 						   mtd);
-	return gpmc_calculate_ecc_bch8(info->gpmc_cs, dat, ecc_code);
+	unsigned long nsectors, val1, val2, val3, val4;
+	int i;
+
+	nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+
+	for (i = 0; i < nsectors; i++) {
+
+		/* Read hw-computed remainder */
+		val1 = readl(info->reg.gpmc_bch_result0[i]);
+		val2 = readl(info->reg.gpmc_bch_result1[i]);
+		val3 = readl(info->reg.gpmc_bch_result2[i]);
+		val4 = readl(info->reg.gpmc_bch_result3[i]);
+
+		/*
+		 * Add constant polynomial to remainder, in order to get an ecc
+		 * sequence of 0xFFs for a buffer filled with 0xFFs.
+		 */
+		*ecc_code++ = 0xef ^ (val4 & 0xFF);
+		*ecc_code++ = 0x51 ^ ((val3 >> 24) & 0xFF);
+		*ecc_code++ = 0x2e ^ ((val3 >> 16) & 0xFF);
+		*ecc_code++ = 0x09 ^ ((val3 >> 8) & 0xFF);
+		*ecc_code++ = 0xed ^ (val3 & 0xFF);
+		*ecc_code++ = 0x93 ^ ((val2 >> 24) & 0xFF);
+		*ecc_code++ = 0x9a ^ ((val2 >> 16) & 0xFF);
+		*ecc_code++ = 0xc2 ^ ((val2 >> 8) & 0xFF);
+		*ecc_code++ = 0x97 ^ (val2 & 0xFF);
+		*ecc_code++ = 0x79 ^ ((val1 >> 24) & 0xFF);
+		*ecc_code++ = 0xe5 ^ ((val1 >> 16) & 0xFF);
+		*ecc_code++ = 0x24 ^ ((val1 >> 8) & 0xFF);
+		*ecc_code++ = 0xb5 ^ (val1 & 0xFF);
+	}
+
+	return 0;
 }
 
 /**
@@ -1125,7 +1213,7 @@ static void omap3_free_bch(struct mtd_info *mtd)
  */
 static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
 {
-	int ret, max_errors;
+	int max_errors;
 	struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
 						   mtd);
 #ifdef CONFIG_MTD_NAND_OMAP_BCH8
@@ -1142,11 +1230,6 @@ static int omap3_init_bch(struct mtd_info *mtd, int ecc_opt)
 		goto fail;
 	}
 
-	/* initialize GPMC BCH engine */
-	ret = gpmc_init_hwecc_bch(info->gpmc_cs, 1, max_errors);
-	if (ret)
-		goto fail;
-
 	/* software bch library is only used to detect and locate errors */
 	info->bch = init_bch(13, max_errors, 0x201b /* hw polynomial */);
 	if (!info->bch)
@@ -1513,7 +1596,7 @@ static int omap_nand_remove(struct platform_device *pdev)
 	/* Release NAND device, its internal structures and partitions */
 	nand_release(&info->mtd);
 	iounmap(info->nand.IO_ADDR_R);
-	release_mem_region(info->phys_base, NAND_IO_SIZE);
+	release_mem_region(info->phys_base, info->mem_size);
 	kfree(info);
 	return 0;
 }

drivers/mtd/onenand/omap2.c

@@ -38,12 +38,10 @@
 #include <linux/regulator/consumer.h>
 
 #include <asm/mach/flash.h>
-#include <plat/gpmc.h>
 #include <linux/platform_data/mtd-onenand-omap2.h>
 #include <asm/gpio.h>
 
 #include <plat/dma.h>
-#include <plat/cpu.h>
 
 #define DRIVER_NAME "omap2-onenand"
 
@@ -63,6 +61,7 @@ struct omap2_onenand {
 	int freq;
 	int (*setup)(void __iomem *base, int *freq_ptr);
 	struct regulator *regulator;
+	u8 flags;
 };
 
 static void omap2_onenand_dma_cb(int lch, u16 ch_status, void *data)
@@ -155,7 +154,7 @@ static int omap2_onenand_wait(struct mtd_info *mtd, int state)
 		if (!(syscfg & ONENAND_SYS_CFG1_IOBE)) {
 			syscfg |= ONENAND_SYS_CFG1_IOBE;
 			write_reg(c, syscfg, ONENAND_REG_SYS_CFG1);
-			if (cpu_is_omap34xx())
+			if (c->flags & ONENAND_IN_OMAP34XX)
 				/* Add a delay to let GPIO settle */
 				syscfg = read_reg(c, ONENAND_REG_SYS_CFG1);
 		}
@@ -639,6 +638,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
 
 	init_completion(&c->irq_done);
 	init_completion(&c->dma_done);
+	c->flags = pdata->flags;
 	c->gpmc_cs = pdata->cs;
 	c->gpio_irq = pdata->gpio_irq;
 	c->dma_channel = pdata->dma_channel;
@@ -729,7 +729,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev)
 	this = &c->onenand;
 	if (c->dma_channel >= 0) {
 		this->wait = omap2_onenand_wait;
-		if (cpu_is_omap34xx()) {
+		if (c->flags & ONENAND_IN_OMAP34XX) {
 			this->read_bufferram = omap3_onenand_read_bufferram;
 			this->write_bufferram = omap3_onenand_write_bufferram;
 		} else {
@@ -803,7 +803,6 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev)
 	}
 	iounmap(c->onenand.base);
 	release_mem_region(c->phys_base, c->mem_size);
-	gpmc_cs_free(c->gpmc_cs);
 	kfree(c);
 
 	return 0;

include/linux/platform_data/mtd-nand-omap2.h

@@ -8,9 +8,13 @@
  * published by the Free Software Foundation.
  */
 
-#include <plat/gpmc.h>
+#ifndef	_MTD_NAND_OMAP2_H
+#define	_MTD_NAND_OMAP2_H
+
 #include <linux/mtd/partitions.h>
 
+#define	GPMC_BCH_NUM_REMAINDER	8
+
 enum nand_io {
 	NAND_OMAP_PREFETCH_POLLED = 0,	/* prefetch polled mode, default */
 	NAND_OMAP_POLLED,		/* polled mode, without prefetch */
@@ -18,10 +22,38 @@ enum nand_io {
 	NAND_OMAP_PREFETCH_IRQ		/* prefetch enabled irq mode */
 };
 
+enum omap_ecc {
+		/* 1-bit ecc: stored at end of spare area */
+	OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
+	OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
+		/* 1-bit ecc: stored at beginning of spare area as romcode */
+	OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
+	OMAP_ECC_BCH4_CODE_HW, /* 4-bit BCH ecc code */
+	OMAP_ECC_BCH8_CODE_HW, /* 8-bit BCH ecc code */
+};
+
+struct gpmc_nand_regs {
+	void __iomem	*gpmc_status;
+	void __iomem	*gpmc_nand_command;
+	void __iomem	*gpmc_nand_address;
+	void __iomem	*gpmc_nand_data;
+	void __iomem	*gpmc_prefetch_config1;
+	void __iomem	*gpmc_prefetch_config2;
+	void __iomem	*gpmc_prefetch_control;
+	void __iomem	*gpmc_prefetch_status;
+	void __iomem	*gpmc_ecc_config;
+	void __iomem	*gpmc_ecc_control;
+	void __iomem	*gpmc_ecc_size_config;
+	void __iomem	*gpmc_ecc1_result;
+	void __iomem	*gpmc_bch_result0[GPMC_BCH_NUM_REMAINDER];
+	void __iomem	*gpmc_bch_result1[GPMC_BCH_NUM_REMAINDER];
+	void __iomem	*gpmc_bch_result2[GPMC_BCH_NUM_REMAINDER];
+	void __iomem	*gpmc_bch_result3[GPMC_BCH_NUM_REMAINDER];
+};
+
 struct omap_nand_platform_data {
 	int			cs;
 	struct mtd_partition	*parts;
-	struct gpmc_timings	*gpmc_t;
 	int			nr_parts;
 	bool			dev_ready;
 	enum nand_io		xfer_type;
@@ -30,14 +62,4 @@ struct omap_nand_platform_data {
 	struct gpmc_nand_regs	reg;
 };
 
-/* minimum size for IO mapping */
-#define	NAND_IO_SIZE	4
-
-#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
-extern int gpmc_nand_init(struct omap_nand_platform_data *d);
-#else
-static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
-{
-	return 0;
-}
 #endif

include/linux/platform_data/mtd-onenand-omap2.h

@@ -9,17 +9,15 @@
  * published by the Free Software Foundation.
  */
 
+#ifndef	__MTD_ONENAND_OMAP2_H
+#define	__MTD_ONENAND_OMAP2_H
+
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
 #define ONENAND_SYNC_READ	(1 << 0)
 #define ONENAND_SYNC_READWRITE	(1 << 1)
-
-struct onenand_freq_info {
-	u16			maf_id;
-	u16			dev_id;
-	u16			ver_id;
-};
+#define	ONENAND_IN_OMAP34XX	(1 << 2)
 
 struct omap_onenand_platform_data {
 	int			cs;
@@ -27,27 +25,9 @@ struct omap_onenand_platform_data {
 	struct mtd_partition	*parts;
 	int			nr_parts;
 	int			(*onenand_setup)(void __iomem *, int *freq_ptr);
-	int		(*get_freq)(const struct onenand_freq_info *freq_info,
-				    bool *clk_dep);
 	int			dma_channel;
 	u8			flags;
 	u8			regulator_can_sleep;
 	u8			skip_initial_unlocking;
 };
-
-#define ONENAND_MAX_PARTITIONS 8
-
-#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
-	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
-
-extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
-
-#else
-
-#define board_onenand_data	NULL
-
-static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
-{
-}
-
 #endif