提交 945feb17 编写于 作者: B Benjamin Herrenschmidt 提交者: Paul Mackerras

[POWERPC] irqtrace support for 64-bit powerpc

This adds the low level irq tracing hooks to the powerpc architecture
needed to enable full lockdep functionality.

This is partly based on Johannes Berg's initial version.  I removed
the asm trampoline that isn't needed (thus improving performance) and
modified all sorts of bits and pieces, reworking most of the assembly,
etc...
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
上级 fd3e0bbc
......@@ -53,6 +53,15 @@ config STACKTRACE_SUPPORT
bool
default y
config TRACE_IRQFLAGS_SUPPORT
bool
depends on PPC64
default y
config LOCKDEP_SUPPORT
bool
default y
config RWSEM_GENERIC_SPINLOCK
bool
......
......@@ -30,6 +30,7 @@
#include <asm/firmware.h>
#include <asm/bug.h>
#include <asm/ptrace.h>
#include <asm/irqflags.h>
/*
* System calls.
......@@ -89,6 +90,14 @@ system_call_common:
addi r9,r1,STACK_FRAME_OVERHEAD
ld r11,exception_marker@toc(r2)
std r11,-16(r9) /* "regshere" marker */
#ifdef CONFIG_TRACE_IRQFLAGS
bl .trace_hardirqs_on
REST_GPR(0,r1)
REST_4GPRS(3,r1)
REST_2GPRS(7,r1)
addi r9,r1,STACK_FRAME_OVERHEAD
ld r12,_MSR(r1)
#endif /* CONFIG_TRACE_IRQFLAGS */
li r10,1
stb r10,PACASOFTIRQEN(r13)
stb r10,PACAHARDIRQEN(r13)
......@@ -103,7 +112,7 @@ BEGIN_FW_FTR_SECTION
b hardware_interrupt_entry
2:
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
#endif /* CONFIG_PPC_ISERIES */
mfmsr r11
ori r11,r11,MSR_EE
mtmsrd r11,1
......@@ -505,6 +514,10 @@ BEGIN_FW_FTR_SECTION
li r3,0
stb r3,PACASOFTIRQEN(r13) /* ensure we are soft-disabled */
#ifdef CONFIG_TRACE_IRQFLAGS
bl .trace_hardirqs_off
mfmsr r10
#endif
ori r10,r10,MSR_EE
mtmsrd r10 /* hard-enable again */
addi r3,r1,STACK_FRAME_OVERHEAD
......@@ -513,7 +526,7 @@ BEGIN_FW_FTR_SECTION
4:
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
stb r5,PACASOFTIRQEN(r13)
TRACE_AND_RESTORE_IRQ(r5);
/* extract EE bit and use it to restore paca->hard_enabled */
ld r3,_MSR(r1)
......@@ -581,6 +594,16 @@ do_work:
bne restore
/* here we are preempting the current task */
1:
#ifdef CONFIG_TRACE_IRQFLAGS
bl .trace_hardirqs_on
/* Note: we just clobbered r10 which used to contain the previous
* MSR before the hard-disabling done by the caller of do_work.
* We don't have that value anymore, but it doesn't matter as
* we will hard-enable unconditionally, we can just reload the
* current MSR into r10
*/
mfmsr r10
#endif /* CONFIG_TRACE_IRQFLAGS */
li r0,1
stb r0,PACASOFTIRQEN(r13)
stb r0,PACAHARDIRQEN(r13)
......
......@@ -36,8 +36,7 @@
#include <asm/firmware.h>
#include <asm/page_64.h>
#include <asm/exception.h>
#define DO_SOFT_DISABLE
#include <asm/irqflags.h>
/*
* We layout physical memory as follows:
......@@ -450,8 +449,8 @@ bad_stack:
*/
fast_exc_return_irq: /* restores irq state too */
ld r3,SOFTE(r1)
TRACE_AND_RESTORE_IRQ(r3);
ld r12,_MSR(r1)
stb r3,PACASOFTIRQEN(r13) /* restore paca->soft_enabled */
rldicl r4,r12,49,63 /* get MSR_EE to LSB */
stb r4,PACAHARDIRQEN(r13) /* restore paca->hard_enabled */
b 1f
......@@ -824,7 +823,7 @@ _STATIC(load_up_altivec)
* Hash table stuff
*/
.align 7
_GLOBAL(do_hash_page)
_STATIC(do_hash_page)
std r3,_DAR(r1)
std r4,_DSISR(r1)
......@@ -835,6 +834,27 @@ BEGIN_FTR_SECTION
bne- do_ste_alloc /* If so handle it */
END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
/*
* On iSeries, we soft-disable interrupts here, then
* hard-enable interrupts so that the hash_page code can spin on
* the hash_table_lock without problems on a shared processor.
*/
DISABLE_INTS
/*
* Currently, trace_hardirqs_off() will be called by DISABLE_INTS
* and will clobber volatile registers when irq tracing is enabled
* so we need to reload them. It may be possible to be smarter here
* and move the irq tracing elsewhere but let's keep it simple for
* now
*/
#ifdef CONFIG_TRACE_IRQFLAGS
ld r3,_DAR(r1)
ld r4,_DSISR(r1)
ld r5,_TRAP(r1)
ld r12,_MSR(r1)
clrrdi r5,r5,4
#endif /* CONFIG_TRACE_IRQFLAGS */
/*
* We need to set the _PAGE_USER bit if MSR_PR is set or if we are
* accessing a userspace segment (even from the kernel). We assume
......@@ -847,13 +867,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
ori r4,r4,1 /* add _PAGE_PRESENT */
rlwimi r4,r5,22+2,31-2,31-2 /* Set _PAGE_EXEC if trap is 0x400 */
/*
* On iSeries, we soft-disable interrupts here, then
* hard-enable interrupts so that the hash_page code can spin on
* the hash_table_lock without problems on a shared processor.
*/
DISABLE_INTS
/*
* r3 contains the faulting address
* r4 contains the required access permissions
......@@ -864,7 +877,6 @@ END_FTR_SECTION_IFCLR(CPU_FTR_SLB)
bl .hash_page /* build HPTE if possible */
cmpdi r3,0 /* see if hash_page succeeded */
#ifdef DO_SOFT_DISABLE
BEGIN_FW_FTR_SECTION
/*
* If we had interrupts soft-enabled at the point where the
......@@ -876,7 +888,7 @@ BEGIN_FW_FTR_SECTION
*/
beq 13f
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#endif
BEGIN_FW_FTR_SECTION
/*
* Here we have interrupts hard-disabled, so it is sufficient
......@@ -890,11 +902,12 @@ END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
/*
* hash_page couldn't handle it, set soft interrupt enable back
* to what it was before the trap. Note that .local_irq_restore
* to what it was before the trap. Note that .raw_local_irq_restore
* handles any interrupts pending at this point.
*/
ld r3,SOFTE(r1)
bl .local_irq_restore
TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f)
bl .raw_local_irq_restore
b 11f
/* Here we have a page fault that hash_page can't handle. */
......@@ -1493,6 +1506,10 @@ _INIT_STATIC(start_here_multiplatform)
addi r2,r2,0x4000
add r2,r2,r26
/* Set initial ptr to current */
LOAD_REG_IMMEDIATE(r4, init_task)
std r4,PACACURRENT(r13)
/* Do very early kernel initializations, including initial hash table,
* stab and slb setup before we turn on relocation. */
......
......@@ -114,7 +114,7 @@ static inline void set_soft_enabled(unsigned long enable)
: : "r" (enable), "i" (offsetof(struct paca_struct, soft_enabled)));
}
void local_irq_restore(unsigned long en)
void raw_local_irq_restore(unsigned long en)
{
/*
* get_paca()->soft_enabled = en;
......@@ -174,6 +174,7 @@ void local_irq_restore(unsigned long en)
__hard_irq_enable();
}
EXPORT_SYMBOL(raw_local_irq_restore);
#endif /* CONFIG_PPC64 */
int show_interrupts(struct seq_file *p, void *v)
......
......@@ -45,10 +45,6 @@
#include <asm/signal.h>
#include <asm/dcr.h>
#ifdef CONFIG_PPC64
EXPORT_SYMBOL(local_irq_restore);
#endif
#ifdef CONFIG_PPC32
extern void transfer_to_handler(void);
extern void do_IRQ(struct pt_regs *regs);
......
......@@ -33,6 +33,7 @@
#include <linux/serial_8250.h>
#include <linux/bootmem.h>
#include <linux/pci.h>
#include <linux/lockdep.h>
#include <linux/lmb.h>
#include <asm/io.h>
#include <asm/kdump.h>
......@@ -178,6 +179,9 @@ void __init early_setup(unsigned long dt_ptr)
/* Enable early debugging if any specified (see udbg.h) */
udbg_early_init();
/* Initialize lockdep early or else spinlocks will blow */
lockdep_init();
DBG(" -> early_setup(), dt_ptr: 0x%lx\n", dt_ptr);
/*
......
......@@ -228,18 +228,18 @@ label##_pSeries: \
BEGIN_FW_FTR_SECTION; \
stb r11,PACAHARDIRQEN(r13); \
END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \
TRACE_DISABLE_INTS; \
BEGIN_FW_FTR_SECTION; \
mfmsr r10; \
ori r10,r10,MSR_EE; \
mtmsrd r10,1; \
END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
#else
#define DISABLE_INTS \
li r11,0; \
stb r11,PACASOFTIRQEN(r13); \
stb r11,PACAHARDIRQEN(r13)
stb r11,PACAHARDIRQEN(r13); \
TRACE_DISABLE_INTS
#endif /* CONFIG_PPC_ISERIES */
#define ENABLE_INTS \
......
......@@ -27,7 +27,7 @@ static inline unsigned long local_get_flags(void)
return flags;
}
static inline unsigned long local_irq_disable(void)
static inline unsigned long raw_local_irq_disable(void)
{
unsigned long flags, zero;
......@@ -39,14 +39,15 @@ static inline unsigned long local_irq_disable(void)
return flags;
}
extern void local_irq_restore(unsigned long);
extern void raw_local_irq_restore(unsigned long);
extern void iseries_handle_interrupts(void);
#define local_irq_enable() local_irq_restore(1)
#define local_save_flags(flags) ((flags) = local_get_flags())
#define local_irq_save(flags) ((flags) = local_irq_disable())
#define raw_local_irq_enable() raw_local_irq_restore(1)
#define raw_local_save_flags(flags) ((flags) = local_get_flags())
#define raw_local_irq_save(flags) ((flags) = raw_local_irq_disable())
#define irqs_disabled() (local_get_flags() == 0)
#define raw_irqs_disabled() (local_get_flags() == 0)
#define raw_irqs_disabled_flags(flags) ((flags) == 0)
#define __hard_irq_enable() __mtmsrd(mfmsr() | MSR_EE, 1)
#define __hard_irq_disable() __mtmsrd(mfmsr() & ~MSR_EE, 1)
......
......@@ -2,30 +2,43 @@
* include/asm-powerpc/irqflags.h
*
* IRQ flags handling
*
* This file gets included from lowlevel asm headers too, to provide
* wrapped versions of the local_irq_*() APIs, based on the
* raw_local_irq_*() macros from the lowlevel headers.
*/
#ifndef _ASM_IRQFLAGS_H
#define _ASM_IRQFLAGS_H
#ifndef __ASSEMBLY__
/*
* Get definitions for raw_local_save_flags(x), etc.
*/
#include <asm-powerpc/hw_irq.h>
#else
#ifdef CONFIG_TRACE_IRQFLAGS
/*
* Do the CPU's IRQ-state tracing from assembly code. We call a
* C function, so save all the C-clobbered registers:
* Most of the CPU's IRQ-state tracing is done from assembly code; we
* have to call a C function so call a wrapper that saves all the
* C-clobbered registers.
*/
#ifdef CONFIG_TRACE_IRQFLAGS
#error No support on PowerPC yet for CONFIG_TRACE_IRQFLAGS
#define TRACE_ENABLE_INTS bl .trace_hardirqs_on
#define TRACE_DISABLE_INTS bl .trace_hardirqs_off
#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip) \
cmpdi en, 0; \
bne 95f; \
stb en,PACASOFTIRQEN(r13); \
bl .trace_hardirqs_off; \
b skip; \
95: bl .trace_hardirqs_on; \
li en,1;
#define TRACE_AND_RESTORE_IRQ(en) \
TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f); \
96: stb en,PACASOFTIRQEN(r13)
#else
# define TRACE_IRQS_ON
# define TRACE_IRQS_OFF
#define TRACE_ENABLE_INTS
#define TRACE_DISABLE_INTS
#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip)
#define TRACE_AND_RESTORE_IRQ(en) \
stb en,PACASOFTIRQEN(r13)
#endif
#endif
#endif
......@@ -32,11 +32,20 @@ struct rw_semaphore {
#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS)
spinlock_t wait_lock;
struct list_head wait_list;
#ifdef CONFIG_DEBUG_LOCK_ALLOC
struct lockdep_map dep_map;
#endif
};
#ifdef CONFIG_DEBUG_LOCK_ALLOC
# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname }
#else
# define __RWSEM_DEP_MAP_INIT(lockname)
#endif
#define __RWSEM_INITIALIZER(name) \
{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
LIST_HEAD_INIT((name).wait_list) }
{ RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
LIST_HEAD_INIT((name).wait_list) __RWSEM_DEP_MAP_INIT(name) }
#define DECLARE_RWSEM(name) \
struct rw_semaphore name = __RWSEM_INITIALIZER(name)
......@@ -46,12 +55,15 @@ extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem);
extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem);
extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem);
static inline void init_rwsem(struct rw_semaphore *sem)
{
sem->count = RWSEM_UNLOCKED_VALUE;
spin_lock_init(&sem->wait_lock);
INIT_LIST_HEAD(&sem->wait_list);
}
extern void __init_rwsem(struct rw_semaphore *sem, const char *name,
struct lock_class_key *key);
#define init_rwsem(sem) \
do { \
static struct lock_class_key __key; \
\
__init_rwsem((sem), #sem, &__key); \
} while (0)
/*
* lock for reading
......@@ -78,7 +90,7 @@ static inline int __down_read_trylock(struct rw_semaphore *sem)
/*
* lock for writing
*/
static inline void __down_write(struct rw_semaphore *sem)
static inline void __down_write_nested(struct rw_semaphore *sem, int subclass)
{
int tmp;
......@@ -88,6 +100,11 @@ static inline void __down_write(struct rw_semaphore *sem)
rwsem_down_write_failed(sem);
}
static inline void __down_write(struct rw_semaphore *sem)
{
__down_write_nested(sem, 0);
}
static inline int __down_write_trylock(struct rw_semaphore *sem)
{
int tmp;
......
......@@ -19,6 +19,7 @@
*
* (the type definitions are in asm/spinlock_types.h)
*/
#include <linux/irqflags.h>
#ifdef CONFIG_PPC64
#include <asm/paca.h>
#include <asm/hvcall.h>
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册