Merge tag 'at91-4.4-fixes-2' of...

Merge tag 'at91-4.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into fixes

Merge "Second fixes for 4.4" from Alexandre Belloni:

- fix of a hardware setup that prevents the sd/mmc interface to show up on
  sama5d2.
- proper selection of pinctrl drivers. PIO4 is necessary for the sama5d2 to
  boot.

* tag 'at91-4.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: at91: fix pinctrl driver selection
  ARM: at91/dt: add always-on to 1.8V regulator

arch/arm/boot/dts/at91-sama5d2_xplained.dts

@@ -184,6 +184,7 @@
 							regulator-name = "VDD_SDHC_1V8";
 							regulator-min-microvolt = <1800000>;
 							regulator-max-microvolt = <1800000>;
+							regulator-always-on;
 						};
 					};
 				};

arch/arm/mach-at91/Kconfig

@@ -4,7 +4,6 @@ menuconfig ARCH_AT91
 	select ARCH_REQUIRE_GPIOLIB
 	select COMMON_CLK_AT91
 	select PINCTRL
-	select PINCTRL_AT91
 	select SOC_BUS
 
 if ARCH_AT91
@@ -17,6 +16,7 @@ config SOC_SAMA5D2
 	select HAVE_AT91_USB_CLK
 	select HAVE_AT91_H32MX
 	select HAVE_AT91_GENERATED_CLK
+	select PINCTRL_AT91PIO4
 	help
 	  Select this if ou are using one of Atmel's SAMA5D2 family SoC.
 
@@ -27,6 +27,7 @@ config SOC_SAMA5D3
 	select HAVE_AT91_UTMI
 	select HAVE_AT91_SMD
 	select HAVE_AT91_USB_CLK
+	select PINCTRL_AT91
 	help
 	  Select this if you are using one of Atmel's SAMA5D3 family SoC.
 	  This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36.
@@ -40,6 +41,7 @@ config SOC_SAMA5D4
 	select HAVE_AT91_SMD
 	select HAVE_AT91_USB_CLK
 	select HAVE_AT91_H32MX
+	select PINCTRL_AT91
 	help
 	  Select this if you are using one of Atmel's SAMA5D4 family SoC.
 
@@ -50,6 +52,7 @@ config SOC_AT91RM9200
 	select CPU_ARM920T
 	select HAVE_AT91_USB_CLK
 	select MIGHT_HAVE_PCI
+	select PINCTRL_AT91
 	select SOC_SAM_V4_V5
 	select SRAM if PM
 	help
@@ -65,6 +68,7 @@ config SOC_AT91SAM9
 	select HAVE_AT91_UTMI
 	select HAVE_FB_ATMEL
 	select MEMORY
+	select PINCTRL_AT91
 	select SOC_SAM_V4_V5
 	select SRAM if PM
 	help

arch/arm/mach-at91/pm.c

@@ -41,8 +41,10 @@
  * implementation should be moved down into the pinctrl driver and get
  * called as part of the generic suspend/resume path.
  */
+#ifdef CONFIG_PINCTRL_AT91
 extern void at91_pinctrl_gpio_suspend(void);
 extern void at91_pinctrl_gpio_resume(void);
+#endif
 
 static struct {
 	unsigned long uhp_udp_mask;
@@ -151,8 +153,9 @@ static void at91_pm_suspend(suspend_state_t state)
 
 static int at91_pm_enter(suspend_state_t state)
 {
+#ifdef CONFIG_PINCTRL_AT91
 	at91_pinctrl_gpio_suspend();
-
+#endif
 	switch (state) {
 	/*
 	 * Suspend-to-RAM is like STANDBY plus slow clock mode, so
@@ -192,7 +195,9 @@ static int at91_pm_enter(suspend_state_t state)
 error:
 	target_state = PM_SUSPEND_ON;
 
+#ifdef CONFIG_PINCTRL_AT91
 	at91_pinctrl_gpio_resume();
+#endif
 	return 0;
 }