提交 9414de39 编写于 作者: M Magnus Damm 提交者: Mauro Carvalho Chehab

V4L/DVB (10079): sh_mobile_ceu: use new pixel format translation code

This patch converts the sh_mobile_ceu driver to make use
of the new pixel format translation code. Only pass-though
mode at this point.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 91962fa7
......@@ -434,8 +434,7 @@ static int sh_mobile_ceu_set_bus_param(struct soc_camera_device *icd,
return 0;
}
static int sh_mobile_ceu_try_bus_param(struct soc_camera_device *icd,
__u32 pixfmt)
static int sh_mobile_ceu_try_bus_param(struct soc_camera_device *icd)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
struct sh_mobile_ceu_dev *pcdev = ici->priv;
......@@ -450,25 +449,60 @@ static int sh_mobile_ceu_try_bus_param(struct soc_camera_device *icd,
return 0;
}
static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, int idx,
struct soc_camera_format_xlate *xlate)
{
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
int ret;
int formats = 0;
ret = sh_mobile_ceu_try_bus_param(icd);
if (ret < 0)
return 0;
switch (icd->formats[idx].fourcc) {
default:
/* Generic pass-through */
formats++;
if (xlate) {
xlate->host_fmt = icd->formats + idx;
xlate->cam_fmt = icd->formats + idx;
xlate->buswidth = icd->formats[idx].depth;
xlate++;
dev_dbg(&ici->dev,
"Providing format %s in pass-through mode\n",
icd->formats[idx].name);
}
}
return formats;
}
static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
__u32 pixfmt, struct v4l2_rect *rect)
{
const struct soc_camera_data_format *cam_fmt = NULL;
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
const struct soc_camera_format_xlate *xlate;
int ret;
/*
* TODO: find a suitable supported by the SoC output format, check
* whether the sensor supports one of acceptable input formats.
*/
if (pixfmt) {
cam_fmt = soc_camera_format_by_fourcc(icd, pixfmt);
if (!cam_fmt)
return -EINVAL;
xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
if (!xlate) {
dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
return -EINVAL;
}
ret = icd->ops->set_fmt(icd, pixfmt, rect);
if (pixfmt && !ret)
icd->current_fmt = cam_fmt;
switch (pixfmt) {
case 0: /* Only geometry change */
ret = icd->ops->set_fmt(icd, pixfmt, rect);
break;
default:
ret = icd->ops->set_fmt(icd, xlate->cam_fmt->fourcc, rect);
}
if (pixfmt && !ret) {
icd->buswidth = xlate->buswidth;
icd->current_fmt = xlate->host_fmt;
}
return ret;
}
......@@ -476,19 +510,15 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd,
static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
struct v4l2_format *f)
{
const struct soc_camera_data_format *cam_fmt;
int ret = sh_mobile_ceu_try_bus_param(icd, f->fmt.pix.pixelformat);
if (ret < 0)
return ret;
struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent);
const struct soc_camera_format_xlate *xlate;
__u32 pixfmt = f->fmt.pix.pixelformat;
/*
* TODO: find a suitable supported by the SoC output format, check
* whether the sensor supports one of acceptable input formats.
*/
cam_fmt = soc_camera_format_by_fourcc(icd, f->fmt.pix.pixelformat);
if (!cam_fmt)
xlate = soc_camera_xlate_by_fourcc(icd, pixfmt);
if (!xlate) {
dev_warn(&ici->dev, "Format %x not found\n", pixfmt);
return -EINVAL;
}
/* FIXME: calculate using depth and bus width */
......@@ -504,7 +534,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd,
f->fmt.pix.height &= ~0x03;
f->fmt.pix.bytesperline = f->fmt.pix.width *
DIV_ROUND_UP(cam_fmt->depth, 8);
DIV_ROUND_UP(xlate->host_fmt->depth, 8);
f->fmt.pix.sizeimage = f->fmt.pix.height * f->fmt.pix.bytesperline;
/* limit to sensor capabilities */
......@@ -576,6 +606,7 @@ static struct soc_camera_host_ops sh_mobile_ceu_host_ops = {
.owner = THIS_MODULE,
.add = sh_mobile_ceu_add_device,
.remove = sh_mobile_ceu_remove_device,
.get_formats = sh_mobile_ceu_get_formats,
.set_fmt = sh_mobile_ceu_set_fmt,
.try_fmt = sh_mobile_ceu_try_fmt,
.reqbufs = sh_mobile_ceu_reqbufs,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册