提交 93cd0813 编写于 作者: J Jiri Pirko 提交者: David S. Miller

mlxsw: spectrum: Teach mlxsw_sp_port_vlan_set to accept any vlan range

So far, mlxsw_sp_port_vlan_set range is limited by
MLXSW_REG_SPVM_REC_MAX_COUNT. In spectrum_switchdev code this is
wrapped up by a helper function which actually does multiple calls
to FW for bigger ranges. Move the code into mlxsw_sp_port_vlan_set
and use it always. That allows caller not to care about the range.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 cedbb8b2
......@@ -1061,8 +1061,9 @@ mlxsw_sp_port_get_stats64(struct net_device *dev,
memcpy(stats, mlxsw_sp_port->hw_stats.cache, sizeof(*stats));
}
int mlxsw_sp_port_vlan_set(struct mlxsw_sp_port *mlxsw_sp_port, u16 vid_begin,
u16 vid_end, bool is_member, bool untagged)
static int __mlxsw_sp_port_vlan_set(struct mlxsw_sp_port *mlxsw_sp_port,
u16 vid_begin, u16 vid_end,
bool is_member, bool untagged)
{
struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp;
char *spvm_pl;
......@@ -1079,6 +1080,26 @@ int mlxsw_sp_port_vlan_set(struct mlxsw_sp_port *mlxsw_sp_port, u16 vid_begin,
return err;
}
int mlxsw_sp_port_vlan_set(struct mlxsw_sp_port *mlxsw_sp_port, u16 vid_begin,
u16 vid_end, bool is_member, bool untagged)
{
u16 vid, vid_e;
int err;
for (vid = vid_begin; vid <= vid_end;
vid += MLXSW_REG_SPVM_REC_MAX_COUNT) {
vid_e = min((u16) (vid + MLXSW_REG_SPVM_REC_MAX_COUNT - 1),
vid_end);
err = __mlxsw_sp_port_vlan_set(mlxsw_sp_port, vid, vid_e,
is_member, untagged);
if (err)
return err;
}
return 0;
}
static int mlxsw_sp_port_vp_mode_trans(struct mlxsw_sp_port *mlxsw_sp_port)
{
enum mlxsw_reg_svfa_mt mt = MLXSW_REG_SVFA_MT_PORT_VID_TO_FID;
......
......@@ -745,27 +745,6 @@ int mlxsw_sp_port_pvid_set(struct mlxsw_sp_port *mlxsw_sp_port, u16 vid)
return err;
}
static int __mlxsw_sp_port_vlans_set(struct mlxsw_sp_port *mlxsw_sp_port,
u16 vid_begin, u16 vid_end, bool is_member,
bool untagged)
{
u16 vid, vid_e;
int err;
for (vid = vid_begin; vid <= vid_end;
vid += MLXSW_REG_SPVM_REC_MAX_COUNT) {
vid_e = min((u16) (vid + MLXSW_REG_SPVM_REC_MAX_COUNT - 1),
vid_end);
err = mlxsw_sp_port_vlan_set(mlxsw_sp_port, vid, vid_e,
is_member, untagged);
if (err)
return err;
}
return 0;
}
static int mlxsw_sp_port_vid_learning_set(struct mlxsw_sp_port *mlxsw_sp_port,
u16 vid_begin, u16 vid_end,
bool learn_enable)
......@@ -804,8 +783,8 @@ static int __mlxsw_sp_port_vlans_add(struct mlxsw_sp_port *mlxsw_sp_port,
return err;
}
err = __mlxsw_sp_port_vlans_set(mlxsw_sp_port, vid_begin, vid_end,
true, flag_untagged);
err = mlxsw_sp_port_vlan_set(mlxsw_sp_port, vid_begin, vid_end,
true, flag_untagged);
if (err) {
netdev_err(dev, "Unable to add VIDs %d-%d\n", vid_begin,
vid_end);
......@@ -863,8 +842,8 @@ static int __mlxsw_sp_port_vlans_add(struct mlxsw_sp_port *mlxsw_sp_port,
if (old_pvid != mlxsw_sp_port->pvid)
mlxsw_sp_port_pvid_set(mlxsw_sp_port, old_pvid);
err_port_pvid_set:
__mlxsw_sp_port_vlans_set(mlxsw_sp_port, vid_begin, vid_end, false,
false);
mlxsw_sp_port_vlan_set(mlxsw_sp_port, vid_begin, vid_end,
false, false);
err_port_vlans_set:
mlxsw_sp_port_fid_leave(mlxsw_sp_port, vid_begin, vid_end);
return err;
......@@ -1171,8 +1150,8 @@ static int __mlxsw_sp_port_vlans_del(struct mlxsw_sp_port *mlxsw_sp_port,
if (pvid >= vid_begin && pvid <= vid_end)
mlxsw_sp_port_pvid_set(mlxsw_sp_port, 0);
__mlxsw_sp_port_vlans_set(mlxsw_sp_port, vid_begin, vid_end, false,
false);
mlxsw_sp_port_vlan_set(mlxsw_sp_port, vid_begin, vid_end,
false, false);
mlxsw_sp_port_fid_leave(mlxsw_sp_port, vid_begin, vid_end);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册