Merge git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - add support for the watchdog on Meson8 and Meson8m2

 - add support for MediaTek MT7623 and MT7622 SoC

 - add support for the r8a77995 wdt

 - explicitly request exclusive reset control for asm9260_wdt,
   zx2967_wdt, rt2880_wdt and mt7621_wdt

 - improvements to asm9260_wdt, aspeed_wdt, renesas_wdt and cadence_wdt

 - add support for reading freq via CCF + suspend/resume support for
   of_xilinx_wdt

 - constify watchdog_ops and various device-id structures

 - revert of commit 1fccb730 ("iTCO_wdt: all versions count down
   twice") (Bug 196509)

* git://www.linux-watchdog.org/linux-watchdog: (40 commits)
  watchdog: mei_wdt: constify mei_cl_device_id
  watchdog: sp805: constify amba_id
  watchdog: ziirave: constify i2c_device_id
  watchdog: sc1200: constify pnp_device_id
  dt-bindings: watchdog: renesas-wdt: Add support for the r8a77995 wdt
  watchdog: renesas_wdt: update copyright dates
  watchdog: renesas_wdt: make 'clk' a variable local to probe()
  watchdog: renesas_wdt: consistently use RuntimePM for clock management
  watchdog: aspeed: Support configuration of external signal properties
  dt-bindings: watchdog: aspeed: External reset signal properties
  drivers/watchdog: Add optional ASPEED device tree properties
  drivers/watchdog: ASPEED reference dev tree properties for config
  watchdog: da9063_wdt: Simplify by removing unneeded struct...
  watchdog: bcm7038: Check the return value from clk_prepare_enable()
  watchdog: qcom: Check for platform_get_resource() failure
  watchdog: of_xilinx_wdt: Add suspend/resume support
  watchdog: of_xilinx_wdt: Add support for reading freq via CCF
  dt-bindings: watchdog: mediatek: add support for MediaTek MT7623 and MT7622 SoC
  watchdog: max77620_wdt: constify platform_device_id
  watchdog: pcwd_usb: constify usb_device_id
  ...

Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt

@@ -8,9 +8,49 @@ Required properties:
  - reg: physical base address of the controller and length of memory mapped
    region
 
+Optional properties:
+
+ - aspeed,reset-type = "cpu|soc|system|none"
+
+   Reset behavior - Whenever a timeout occurs the watchdog can be programmed
+   to generate one of three different, mutually exclusive, types of resets.
+
+   Type "none" can be specified to indicate that no resets are to be done.
+   This is useful in situations where another watchdog engine on chip is
+   to perform the reset.
+
+   If 'aspeed,reset-type=' is not specfied the default is to enable system
+   reset.
+
+   Reset types:
+
+        - cpu: Reset CPU on watchdog timeout
+
+        - soc: Reset 'System on Chip' on watchdog timeout
+
+        - system: Reset system on watchdog timeout
+
+        - none: No reset is performed on timeout. Assumes another watchdog
+                engine is responsible for this.
+
+ - aspeed,alt-boot:    If property is present then boot from alternate block.
+ - aspeed,external-signal: If property is present then signal is sent to
+			external reset counter (only WDT1 and WDT2). If not
+			specified no external signal is sent.
+ - aspeed,ext-pulse-duration: External signal pulse duration in microseconds
+
+Optional properties for AST2500-compatible watchdogs:
+ - aspeed,ext-push-pull: If aspeed,external-signal is present, set the pin's
+			 drive type to push-pull. The default is open-drain.
+ - aspeed,ext-active-high: If aspeed,external-signal is present and and the pin
+			   is configured as push-pull, then set the pulse
+			   polarity to active-high. The default is active-low.
+
 Example:
 
 	wdt1: watchdog@1e785000 {
 		compatible = "aspeed,ast2400-wdt";
 		reg = <0x1e785000 0x1c>;
+		aspeed,reset-type = "system";
+		aspeed,external-signal;
 	};

Documentation/devicetree/bindings/watchdog/meson-wdt.txt

@@ -2,7 +2,11 @@ Meson SoCs Watchdog timer
 
 Required properties:
 
-- compatible : should be "amlogic,meson6-wdt" or "amlogic,meson8b-wdt"
+- compatible : depending on the SoC this should be one of:
+	"amlogic,meson6-wdt" on Meson6 SoCs
+	"amlogic,meson8-wdt" and "amlogic,meson6-wdt" on Meson8 SoCs
+	"amlogic,meson8b-wdt" on Meson8b SoCs
+	"amlogic,meson8m2-wdt" and "amlogic,meson8b-wdt" on Meson8m2 SoCs
 - reg : Specifies base physical address and size of the registers.
 
 Example:

Documentation/devicetree/bindings/watchdog/mtk-wdt.txt

@@ -6,6 +6,8 @@ Required properties:
 	"mediatek,mt2701-wdt", "mediatek,mt6589-wdt": for MT2701
 	"mediatek,mt6589-wdt": for MT6589
 	"mediatek,mt6797-wdt", "mediatek,mt6589-wdt": for MT6797
+	"mediatek,mt7622-wdt", "mediatek,mt6589-wdt": for MT7622
+	"mediatek,mt7623-wdt", "mediatek,mt6589-wdt": for MT7623
 
 - reg : Specifies base physical address and size of the registers.
 

Documentation/devicetree/bindings/watchdog/renesas-wdt.txt

@@ -6,6 +6,7 @@ Required properties:
 	       Examples with soctypes are:
 	         - "renesas,r8a7795-wdt" (R-Car H3)
 	         - "renesas,r8a7796-wdt" (R-Car M3-W)
+	         - "renesas,r8a77995-wdt" (R-Car D3)
 	         - "renesas,r7s72100-wdt" (RZ/A1)
 
   When compatible with the generic version, nodes must list the SoC-specific

Documentation/watchdog/watchdog-parameters.txt

@@ -117,7 +117,7 @@ nowayout: Watchdog cannot be stopped once started
 -------------------------------------------------
 iTCO_wdt:
 heartbeat: Watchdog heartbeat in seconds.
-	(5<=heartbeat<=74 (TCO v1) or 1226 (TCO v2), default=30)
+	(2<heartbeat<39 (TCO v1) or 613 (TCO v2), default=30)
 nowayout: Watchdog cannot be stopped once started
 	(default=kernel config parameter)
 -------------------------------------------------

drivers/watchdog/asm9260_wdt.c

@@ -82,7 +82,7 @@ static unsigned int asm9260_wdt_gettimeleft(struct watchdog_device *wdd)
 
 	counter = ioread32(priv->iobase + HW_WDTV);
 
-	return DIV_ROUND_CLOSEST(counter, priv->wdt_freq);
+	return counter / priv->wdt_freq;
 }
 
 static int asm9260_wdt_updatetimeout(struct watchdog_device *wdd)
@@ -296,7 +296,7 @@ static int asm9260_wdt_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	priv->rst = devm_reset_control_get(&pdev->dev, "wdt_rst");
+	priv->rst = devm_reset_control_get_exclusive(&pdev->dev, "wdt_rst");
 	if (IS_ERR(priv->rst))
 		return PTR_ERR(priv->rst);
 

drivers/watchdog/aspeed_wdt.c

@@ -23,9 +23,21 @@ struct aspeed_wdt {
 	u32			ctrl;
 };
 
+struct aspeed_wdt_config {
+	u32 ext_pulse_width_mask;
+};
+
+static const struct aspeed_wdt_config ast2400_config = {
+	.ext_pulse_width_mask = 0xff,
+};
+
+static const struct aspeed_wdt_config ast2500_config = {
+	.ext_pulse_width_mask = 0xfffff,
+};
+
 static const struct of_device_id aspeed_wdt_of_table[] = {
-	{ .compatible = "aspeed,ast2400-wdt" },
-	{ .compatible = "aspeed,ast2500-wdt" },
+	{ .compatible = "aspeed,ast2400-wdt", .data = &ast2400_config },
+	{ .compatible = "aspeed,ast2500-wdt", .data = &ast2500_config },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table);
@@ -36,12 +48,45 @@ MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table);
 #define WDT_CTRL		0x0C
 #define   WDT_CTRL_RESET_MODE_SOC	(0x00 << 5)
 #define   WDT_CTRL_RESET_MODE_FULL_CHIP	(0x01 << 5)
+#define   WDT_CTRL_RESET_MODE_ARM_CPU	(0x10 << 5)
 #define   WDT_CTRL_1MHZ_CLK		BIT(4)
 #define   WDT_CTRL_WDT_EXT		BIT(3)
 #define   WDT_CTRL_WDT_INTR		BIT(2)
 #define   WDT_CTRL_RESET_SYSTEM		BIT(1)
 #define   WDT_CTRL_ENABLE		BIT(0)
 
+/*
+ * WDT_RESET_WIDTH controls the characteristics of the external pulse (if
+ * enabled), specifically:
+ *
+ * * Pulse duration
+ * * Drive mode: push-pull vs open-drain
+ * * Polarity: Active high or active low
+ *
+ * Pulse duration configuration is available on both the AST2400 and AST2500,
+ * though the field changes between SoCs:
+ *
+ * AST2400: Bits 7:0
+ * AST2500: Bits 19:0
+ *
+ * This difference is captured in struct aspeed_wdt_config.
+ *
+ * The AST2500 exposes the drive mode and polarity options, but not in a
+ * regular fashion. For read purposes, bit 31 represents active high or low,
+ * and bit 30 represents push-pull or open-drain. With respect to write, magic
+ * values need to be written to the top byte to change the state of the drive
+ * mode and polarity bits. Any other value written to the top byte has no
+ * effect on the state of the drive mode or polarity bits. However, the pulse
+ * width value must be preserved (as desired) if written.
+ */
+#define WDT_RESET_WIDTH		0x18
+#define   WDT_RESET_WIDTH_ACTIVE_HIGH	BIT(31)
+#define     WDT_ACTIVE_HIGH_MAGIC	(0xA5 << 24)
+#define     WDT_ACTIVE_LOW_MAGIC	(0x5A << 24)
+#define   WDT_RESET_WIDTH_PUSH_PULL	BIT(30)
+#define     WDT_PUSH_PULL_MAGIC		(0xA8 << 24)
+#define     WDT_OPEN_DRAIN_MAGIC	(0x8A << 24)
+
 #define WDT_RESTART_MAGIC	0x4755
 
 /* 32 bits at 1MHz, in milliseconds */
@@ -138,8 +183,13 @@ static const struct watchdog_info aspeed_wdt_info = {
 
 static int aspeed_wdt_probe(struct platform_device *pdev)
 {
+	const struct aspeed_wdt_config *config;
+	const struct of_device_id *ofdid;
 	struct aspeed_wdt *wdt;
 	struct resource *res;
+	struct device_node *np;
+	const char *reset_type;
+	u32 duration;
 	int ret;
 
 	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
@@ -164,20 +214,88 @@ static int aspeed_wdt_probe(struct platform_device *pdev)
 	wdt->wdd.timeout = WDT_DEFAULT_TIMEOUT;
 	watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev);
 
+	np = pdev->dev.of_node;
+
+	ofdid = of_match_node(aspeed_wdt_of_table, np);
+	if (!ofdid)
+		return -EINVAL;
+	config = ofdid->data;
+
+	wdt->ctrl = WDT_CTRL_1MHZ_CLK;
+
 	/*
 	 * Control reset on a per-device basis to ensure the
-	 * host is not affected by a BMC reboot, so only reset
-	 * the SOC and not the full chip
+	 * host is not affected by a BMC reboot
 	 */
-	wdt->ctrl = WDT_CTRL_RESET_MODE_SOC |
-		WDT_CTRL_1MHZ_CLK |
-		WDT_CTRL_RESET_SYSTEM;
+	ret = of_property_read_string(np, "aspeed,reset-type", &reset_type);
+	if (ret) {
+		wdt->ctrl |= WDT_CTRL_RESET_MODE_SOC | WDT_CTRL_RESET_SYSTEM;
+	} else {
+		if (!strcmp(reset_type, "cpu"))
+			wdt->ctrl |= WDT_CTRL_RESET_MODE_ARM_CPU;
+		else if (!strcmp(reset_type, "soc"))
+			wdt->ctrl |= WDT_CTRL_RESET_MODE_SOC;
+		else if (!strcmp(reset_type, "system"))
+			wdt->ctrl |= WDT_CTRL_RESET_SYSTEM;
+		else if (strcmp(reset_type, "none"))
+			return -EINVAL;
+	}
+	if (of_property_read_bool(np, "aspeed,external-signal"))
+		wdt->ctrl |= WDT_CTRL_WDT_EXT;
+
+	writel(wdt->ctrl, wdt->base + WDT_CTRL);
 
 	if (readl(wdt->base + WDT_CTRL) & WDT_CTRL_ENABLE)  {
 		aspeed_wdt_start(&wdt->wdd);
 		set_bit(WDOG_HW_RUNNING, &wdt->wdd.status);
 	}
 
+	if (of_device_is_compatible(np, "aspeed,ast2500-wdt")) {
+		u32 reg = readl(wdt->base + WDT_RESET_WIDTH);
+
+		reg &= config->ext_pulse_width_mask;
+		if (of_property_read_bool(np, "aspeed,ext-push-pull"))
+			reg |= WDT_PUSH_PULL_MAGIC;
+		else
+			reg |= WDT_OPEN_DRAIN_MAGIC;
+
+		writel(reg, wdt->base + WDT_RESET_WIDTH);
+
+		reg &= config->ext_pulse_width_mask;
+		if (of_property_read_bool(np, "aspeed,ext-active-high"))
+			reg |= WDT_ACTIVE_HIGH_MAGIC;
+		else
+			reg |= WDT_ACTIVE_LOW_MAGIC;
+
+		writel(reg, wdt->base + WDT_RESET_WIDTH);
+	}
+
+	if (!of_property_read_u32(np, "aspeed,ext-pulse-duration", &duration)) {
+		u32 max_duration = config->ext_pulse_width_mask + 1;
+
+		if (duration == 0 || duration > max_duration) {
+			dev_err(&pdev->dev, "Invalid pulse duration: %uus\n",
+					duration);
+			duration = max(1U, min(max_duration, duration));
+			dev_info(&pdev->dev, "Pulse duration set to %uus\n",
+					duration);
+		}
+
+		/*
+		 * The watchdog is always configured with a 1MHz source, so
+		 * there is no need to scale the microsecond value. However we
+		 * need to offset it - from the datasheet:
+		 *
+		 * "This register decides the asserting duration of wdt_ext and
+		 * wdt_rstarm signal. The default value is 0xFF. It means the
+		 * default asserting duration of wdt_ext and wdt_rstarm is
+		 * 256us."
+		 *
+		 * This implies a value of 0 gives a 1us pulse.
+		 */
+		writel(duration - 1, wdt->base + WDT_RESET_WIDTH);
+	}
+
 	ret = devm_watchdog_register_device(&pdev->dev, &wdt->wdd);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register\n");

drivers/watchdog/bcm7038_wdt.c

@@ -136,7 +136,9 @@ static int bcm7038_wdt_probe(struct platform_device *pdev)
 	wdt->clk = devm_clk_get(dev, NULL);
 	/* If unable to get clock, use default frequency */
 	if (!IS_ERR(wdt->clk)) {
-		clk_prepare_enable(wdt->clk);
+		err = clk_prepare_enable(wdt->clk);
+		if (err)
+			return err;
 		wdt->rate = clk_get_rate(wdt->clk);
 		/* Prevent divide-by-zero exception */
 		if (!wdt->rate)

drivers/watchdog/cadence_wdt.c

@@ -52,12 +52,12 @@
 static int wdt_timeout;
 static int nowayout = WATCHDOG_NOWAYOUT;
 
-module_param(wdt_timeout, int, 0);
+module_param(wdt_timeout, int, 0644);
 MODULE_PARM_DESC(wdt_timeout,
 		 "Watchdog time in seconds. (default="
 		 __MODULE_STRING(CDNS_WDT_DEFAULT_TIMEOUT) ")");
 
-module_param(nowayout, int, 0);
+module_param(nowayout, int, 0644);
 MODULE_PARM_DESC(nowayout,
 		 "Watchdog cannot be stopped once started (default="
 		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
@@ -368,7 +368,7 @@ static int cdns_wdt_probe(struct platform_device *pdev)
 	}
 	platform_set_drvdata(pdev, wdt);
 
-	dev_dbg(&pdev->dev, "Xilinx Watchdog Timer at %p with timeout %ds%s\n",
+	dev_info(&pdev->dev, "Xilinx Watchdog Timer at %p with timeout %ds%s\n",
 		 wdt->regs, cdns_wdt_device->timeout,
 		 nowayout ? ", nowayout" : "");
 

drivers/watchdog/coh901327_wdt.c

@@ -218,7 +218,7 @@ static const struct watchdog_info coh901327_ident = {
 	.identity = DRV_NAME,
 };
 
-static struct watchdog_ops coh901327_ops = {
+static const struct watchdog_ops coh901327_ops = {
 	.owner = THIS_MODULE,
 	.start = coh901327_start,
 	.stop = coh901327_stop,

drivers/watchdog/da9063_wdt.c

@@ -36,11 +36,6 @@ static const unsigned int wdt_timeout[] = { 0, 2, 4, 8, 16, 32, 65, 131 };
 #define DA9063_WDG_TIMEOUT		wdt_timeout[3]
 #define DA9063_RESET_PROTECTION_MS	256
 
-struct da9063_watchdog {
-	struct da9063 *da9063;
-	struct watchdog_device wdtdev;
-};
-
 static unsigned int da9063_wdt_timeout_to_sel(unsigned int secs)
 {
 	unsigned int i;
@@ -61,14 +56,14 @@ static int _da9063_wdt_set_timeout(struct da9063 *da9063, unsigned int regval)
 
 static int da9063_wdt_start(struct watchdog_device *wdd)
 {
-	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
+	struct da9063 *da9063 = watchdog_get_drvdata(wdd);
 	unsigned int selector;
 	int ret;
 
-	selector = da9063_wdt_timeout_to_sel(wdt->wdtdev.timeout);
-	ret = _da9063_wdt_set_timeout(wdt->da9063, selector);
+	selector = da9063_wdt_timeout_to_sel(wdd->timeout);
+	ret = _da9063_wdt_set_timeout(da9063, selector);
 	if (ret)
-		dev_err(wdt->da9063->dev, "Watchdog failed to start (err = %d)\n",
+		dev_err(da9063->dev, "Watchdog failed to start (err = %d)\n",
 			ret);
 
 	return ret;
@@ -76,13 +71,13 @@ static int da9063_wdt_start(struct watchdog_device *wdd)
 
 static int da9063_wdt_stop(struct watchdog_device *wdd)
 {
-	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
+	struct da9063 *da9063 = watchdog_get_drvdata(wdd);
 	int ret;
 
-	ret = regmap_update_bits(wdt->da9063->regmap, DA9063_REG_CONTROL_D,
+	ret = regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D,
 				 DA9063_TWDSCALE_MASK, DA9063_TWDSCALE_DISABLE);
 	if (ret)
-		dev_alert(wdt->da9063->dev, "Watchdog failed to stop (err = %d)\n",
+		dev_alert(da9063->dev, "Watchdog failed to stop (err = %d)\n",
 			  ret);
 
 	return ret;
@@ -90,13 +85,13 @@ static int da9063_wdt_stop(struct watchdog_device *wdd)
 
 static int da9063_wdt_ping(struct watchdog_device *wdd)
 {
-	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
+	struct da9063 *da9063 = watchdog_get_drvdata(wdd);
 	int ret;
 
-	ret = regmap_write(wdt->da9063->regmap, DA9063_REG_CONTROL_F,
+	ret = regmap_write(da9063->regmap, DA9063_REG_CONTROL_F,
 			   DA9063_WATCHDOG);
 	if (ret)
-		dev_alert(wdt->da9063->dev, "Failed to ping the watchdog (err = %d)\n",
+		dev_alert(da9063->dev, "Failed to ping the watchdog (err = %d)\n",
 			  ret);
 
 	return ret;
@@ -105,14 +100,14 @@ static int da9063_wdt_ping(struct watchdog_device *wdd)
 static int da9063_wdt_set_timeout(struct watchdog_device *wdd,
 				  unsigned int timeout)
 {
-	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
+	struct da9063 *da9063 = watchdog_get_drvdata(wdd);
 	unsigned int selector;
 	int ret;
 
 	selector = da9063_wdt_timeout_to_sel(timeout);
-	ret = _da9063_wdt_set_timeout(wdt->da9063, selector);
+	ret = _da9063_wdt_set_timeout(da9063, selector);
 	if (ret)
-		dev_err(wdt->da9063->dev, "Failed to set watchdog timeout (err = %d)\n",
+		dev_err(da9063->dev, "Failed to set watchdog timeout (err = %d)\n",
 			ret);
 	else
 		wdd->timeout = wdt_timeout[selector];
@@ -123,13 +118,13 @@ static int da9063_wdt_set_timeout(struct watchdog_device *wdd,
 static int da9063_wdt_restart(struct watchdog_device *wdd, unsigned long action,
 			      void *data)
 {
-	struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
+	struct da9063 *da9063 = watchdog_get_drvdata(wdd);
 	int ret;
 
-	ret = regmap_write(wdt->da9063->regmap, DA9063_REG_CONTROL_F,
+	ret = regmap_write(da9063->regmap, DA9063_REG_CONTROL_F,
 			   DA9063_SHUTDOWN);
 	if (ret)
-		dev_alert(wdt->da9063->dev, "Failed to shutdown (err = %d)\n",
+		dev_alert(da9063->dev, "Failed to shutdown (err = %d)\n",
 			  ret);
 
 	return ret;
@@ -152,7 +147,7 @@ static const struct watchdog_ops da9063_watchdog_ops = {
 static int da9063_wdt_probe(struct platform_device *pdev)
 {
 	struct da9063 *da9063;
-	struct da9063_watchdog *wdt;
+	struct watchdog_device *wdd;
 
 	if (!pdev->dev.parent)
 		return -EINVAL;
@@ -161,27 +156,25 @@ static int da9063_wdt_probe(struct platform_device *pdev)
 	if (!da9063)
 		return -EINVAL;
 
-	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
-	if (!wdt)
+	wdd = devm_kzalloc(&pdev->dev, sizeof(*wdd), GFP_KERNEL);
+	if (!wdd)
 		return -ENOMEM;
 
-	wdt->da9063 = da9063;
-
-	wdt->wdtdev.info = &da9063_watchdog_info;
-	wdt->wdtdev.ops = &da9063_watchdog_ops;
-	wdt->wdtdev.min_timeout = DA9063_WDT_MIN_TIMEOUT;
-	wdt->wdtdev.max_timeout = DA9063_WDT_MAX_TIMEOUT;
-	wdt->wdtdev.min_hw_heartbeat_ms = DA9063_RESET_PROTECTION_MS;
-	wdt->wdtdev.timeout = DA9063_WDG_TIMEOUT;
-	wdt->wdtdev.parent = &pdev->dev;
+	wdd->info = &da9063_watchdog_info;
+	wdd->ops = &da9063_watchdog_ops;
+	wdd->min_timeout = DA9063_WDT_MIN_TIMEOUT;
+	wdd->max_timeout = DA9063_WDT_MAX_TIMEOUT;
+	wdd->min_hw_heartbeat_ms = DA9063_RESET_PROTECTION_MS;
+	wdd->timeout = DA9063_WDG_TIMEOUT;
+	wdd->parent = &pdev->dev;
 
-	wdt->wdtdev.status = WATCHDOG_NOWAYOUT_INIT_STATUS;
+	wdd->status = WATCHDOG_NOWAYOUT_INIT_STATUS;
 
-	watchdog_set_restart_priority(&wdt->wdtdev, 128);
+	watchdog_set_restart_priority(wdd, 128);
 
-	watchdog_set_drvdata(&wdt->wdtdev, wdt);
+	watchdog_set_drvdata(wdd, da9063);
 
-	return devm_watchdog_register_device(&pdev->dev, &wdt->wdtdev);
+	return devm_watchdog_register_device(&pdev->dev, wdd);
 }
 
 static struct platform_driver da9063_wdt_driver = {

drivers/watchdog/diag288_wdt.c

@@ -213,7 +213,7 @@ static const struct watchdog_ops wdt_ops = {
 	.set_timeout = wdt_set_timeout,
 };
 
-static struct watchdog_info wdt_info = {
+static const struct watchdog_info wdt_info = {
 	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 	.firmware_version = 0,
 	.identity = "z Watchdog",

drivers/watchdog/iTCO_wdt.c

@@ -306,15 +306,16 @@ static int iTCO_wdt_ping(struct watchdog_device *wd_dev)
 
 	iTCO_vendor_pre_keepalive(p->smi_res, wd_dev->timeout);
 
-	/* Reset the timeout status bit so that the timer
-	 * needs to count down twice again before rebooting */
-	outw(0x0008, TCO1_STS(p));	/* write 1 to clear bit */
-
 	/* Reload the timer by writing to the TCO Timer Counter register */
-	if (p->iTCO_version >= 2)
+	if (p->iTCO_version >= 2) {
 		outw(0x01, TCO_RLD(p));
-	else if (p->iTCO_version == 1)
+	} else if (p->iTCO_version == 1) {
+		/* Reset the timeout status bit so that the timer
+		 * needs to count down twice again before rebooting */
+		outw(0x0008, TCO1_STS(p));	/* write 1 to clear bit */
+
 		outb(0x01, TCO_RLD(p));
+	}
 
 	spin_unlock(&p->io_lock);
 	return 0;
@@ -327,8 +328,11 @@ static int iTCO_wdt_set_timeout(struct watchdog_device *wd_dev, unsigned int t)
 	unsigned char val8;
 	unsigned int tmrval;
 
-	/* The timer counts down twice before rebooting */
-	tmrval = seconds_to_ticks(p, t) / 2;
+	tmrval = seconds_to_ticks(p, t);
+
+	/* For TCO v1 the timer counts down twice before rebooting */
+	if (p->iTCO_version == 1)
+		tmrval /= 2;
 
 	/* from the specs: */
 	/* "Values of 0h-3h are ignored and should not be attempted" */
@@ -381,8 +385,6 @@ static unsigned int iTCO_wdt_get_timeleft(struct watchdog_device *wd_dev)
 		spin_lock(&p->io_lock);
 		val16 = inw(TCO_RLD(p));
 		val16 &= 0x3ff;
-		if (!(inw(TCO1_STS(p)) & 0x0008))
-			val16 += (inw(TCOv2_TMR(p)) & 0x3ff);
 		spin_unlock(&p->io_lock);
 
 		time_left = ticks_to_seconds(p, val16);

drivers/watchdog/it87_wdt.c

@@ -253,7 +253,7 @@ static const struct watchdog_info ident = {
 	.identity = WATCHDOG_NAME,
 };
 
-static struct watchdog_ops wdt_ops = {
+static const struct watchdog_ops wdt_ops = {
 	.owner = THIS_MODULE,
 	.start = wdt_start,
 	.stop = wdt_stop,

drivers/watchdog/max77620_wdt.c

@@ -201,7 +201,7 @@ static int max77620_wdt_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static struct platform_device_id max77620_wdt_devtype[] = {
+static const struct platform_device_id max77620_wdt_devtype[] = {
 	{ .name = "max77620-watchdog", },
 	{ },
 };

drivers/watchdog/mei_wdt.c

@@ -670,7 +670,7 @@ static int mei_wdt_remove(struct mei_cl_device *cldev)
 #define MEI_UUID_WD UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, \
 			    0x89, 0x9D, 0xA9, 0x15, 0x14, 0xCB, 0x32, 0xAB)
 
-static struct mei_cl_device_id mei_wdt_tbl[] = {
+static const struct mei_cl_device_id mei_wdt_tbl[] = {
 	{ .uuid = MEI_UUID_WD, .version = MEI_CL_VERSION_ANY },
 	/* required last entry */
 	{ }

drivers/watchdog/meson_wdt.c

@@ -155,7 +155,9 @@ static const struct watchdog_ops meson_wdt_ops = {
 
 static const struct of_device_id meson_wdt_dt_ids[] = {
 	{ .compatible = "amlogic,meson6-wdt", .data = &meson6_wdt_data },
+	{ .compatible = "amlogic,meson8-wdt", .data = &meson6_wdt_data },
 	{ .compatible = "amlogic,meson8b-wdt", .data = &meson8b_wdt_data },
+	{ .compatible = "amlogic,meson8m2-wdt", .data = &meson8b_wdt_data },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, meson_wdt_dt_ids);

drivers/watchdog/mt7621_wdt.c

@@ -105,7 +105,7 @@ static int mt7621_wdt_bootcause(void)
 	return 0;
 }
 
-static struct watchdog_info mt7621_wdt_info = {
+static const struct watchdog_info mt7621_wdt_info = {
 	.identity = "Mediatek Watchdog",
 	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 };
@@ -135,7 +135,7 @@ static int mt7621_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(mt7621_wdt_base))
 		return PTR_ERR(mt7621_wdt_base);
 
-	mt7621_wdt_reset = devm_reset_control_get(&pdev->dev, NULL);
+	mt7621_wdt_reset = devm_reset_control_get_exclusive(&pdev->dev, NULL);
 	if (!IS_ERR(mt7621_wdt_reset))
 		reset_control_deassert(mt7621_wdt_reset);
 

drivers/watchdog/of_xilinx_wdt.c

@@ -51,9 +51,16 @@ struct xwdt_device {
 
 static int xilinx_wdt_start(struct watchdog_device *wdd)
 {
+	int ret;
 	u32 control_status_reg;
 	struct xwdt_device *xdev = watchdog_get_drvdata(wdd);
 
+	ret = clk_enable(xdev->clk);
+	if (ret) {
+		dev_err(wdd->parent, "Failed to enable clock\n");
+		return ret;
+	}
+
 	spin_lock(&xdev->spinlock);
 
 	/* Clean previous status and enable the watchdog timer */
@@ -85,6 +92,9 @@ static int xilinx_wdt_stop(struct watchdog_device *wdd)
 	iowrite32(0, xdev->base + XWT_TWCSR1_OFFSET);
 
 	spin_unlock(&xdev->spinlock);
+
+	clk_disable(xdev->clk);
+
 	pr_info("Stopped!\n");
 
 	return 0;
@@ -167,11 +177,6 @@ static int xwdt_probe(struct platform_device *pdev)
 	if (IS_ERR(xdev->base))
 		return PTR_ERR(xdev->base);
 
-	rc = of_property_read_u32(pdev->dev.of_node, "clock-frequency", &pfreq);
-	if (rc)
-		dev_warn(&pdev->dev,
-			 "The watchdog clock frequency cannot be obtained\n");
-
 	rc = of_property_read_u32(pdev->dev.of_node, "xlnx,wdt-interval",
 				  &xdev->wdt_interval);
 	if (rc)
@@ -186,6 +191,26 @@ static int xwdt_probe(struct platform_device *pdev)
 
 	watchdog_set_nowayout(xilinx_wdt_wdd, enable_once);
 
+	xdev->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(xdev->clk)) {
+		if (PTR_ERR(xdev->clk) != -ENOENT)
+			return PTR_ERR(xdev->clk);
+
+		/*
+		 * Clock framework support is optional, continue on
+		 * anyways if we don't find a matching clock.
+		 */
+		xdev->clk = NULL;
+
+		rc = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
+					  &pfreq);
+		if (rc)
+			dev_warn(&pdev->dev,
+				 "The watchdog clock freq cannot be obtained\n");
+	} else {
+		pfreq = clk_get_rate(xdev->clk);
+	}
+
 	/*
 	 * Twice of the 2^wdt_interval / freq  because the first wdt overflow is
 	 * ignored (interrupt), reset is only generated at second wdt overflow
@@ -197,14 +222,6 @@ static int xwdt_probe(struct platform_device *pdev)
 	spin_lock_init(&xdev->spinlock);
 	watchdog_set_drvdata(xilinx_wdt_wdd, xdev);
 
-	xdev->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(xdev->clk)) {
-		if (PTR_ERR(xdev->clk) == -ENOENT)
-			xdev->clk = NULL;
-		else
-			return PTR_ERR(xdev->clk);
-	}
-
 	rc = clk_prepare_enable(xdev->clk);
 	if (rc) {
 		dev_err(&pdev->dev, "unable to enable clock\n");
@@ -223,6 +240,8 @@ static int xwdt_probe(struct platform_device *pdev)
 		goto err_clk_disable;
 	}
 
+	clk_disable(xdev->clk);
+
 	dev_info(&pdev->dev, "Xilinx Watchdog Timer at %p with timeout %ds\n",
 		 xdev->base, xilinx_wdt_wdd->timeout);
 
@@ -245,6 +264,43 @@ static int xwdt_remove(struct platform_device *pdev)
 	return 0;
 }
 
+/**
+ * xwdt_suspend - Suspend the device.
+ *
+ * @dev: handle to the device structure.
+ * Return: 0 always.
+ */
+static int __maybe_unused xwdt_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct xwdt_device *xdev = platform_get_drvdata(pdev);
+
+	if (watchdog_active(&xdev->xilinx_wdt_wdd))
+		xilinx_wdt_stop(&xdev->xilinx_wdt_wdd);
+
+	return 0;
+}
+
+/**
+ * xwdt_resume - Resume the device.
+ *
+ * @dev: handle to the device structure.
+ * Return: 0 on success, errno otherwise.
+ */
+static int __maybe_unused xwdt_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct xwdt_device *xdev = platform_get_drvdata(pdev);
+	int ret = 0;
+
+	if (watchdog_active(&xdev->xilinx_wdt_wdd))
+		ret = xilinx_wdt_start(&xdev->xilinx_wdt_wdd);
+
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(xwdt_pm_ops, xwdt_suspend, xwdt_resume);
+
 /* Match table for of_platform binding */
 static const struct of_device_id xwdt_of_match[] = {
 	{ .compatible = "xlnx,xps-timebase-wdt-1.00.a", },
@@ -259,6 +315,7 @@ static struct platform_driver xwdt_driver = {
 	.driver = {
 		.name  = WATCHDOG_NAME,
 		.of_match_table = xwdt_of_match,
+		.pm = &xwdt_pm_ops,
 	},
 };
 

drivers/watchdog/pcwd_usb.c

@@ -74,7 +74,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 #define USB_PCWD_PRODUCT_ID	0x1140
 
 /* table of devices that work with this driver */
-static struct usb_device_id usb_pcwd_table[] = {
+static const struct usb_device_id usb_pcwd_table[] = {
 	{ USB_DEVICE(USB_PCWD_VENDOR_ID, USB_PCWD_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };

drivers/watchdog/qcom-wdt.c

@@ -162,6 +162,8 @@ static int qcom_wdt_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENOMEM;
 
 	/* We use CPU0's DGT for the watchdog */
 	if (of_property_read_u32(np, "cpu-offset", &percpu_offset))

drivers/watchdog/renesas_wdt.c

 /*
  * Watchdog driver for Renesas WDT watchdog
  *
- * Copyright (C) 2015-16 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
- * Copyright (C) 2015-16 Renesas Electronics Corporation
+ * Copyright (C) 2015-17 Wolfram Sang, Sang Engineering <wsa@sang-engineering.com>
+ * Copyright (C) 2015-17 Renesas Electronics Corporation
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published by
@@ -23,10 +23,22 @@
 #define RWTCSRA_WOVF	BIT(4)
 #define RWTCSRA_WRFLG	BIT(5)
 #define RWTCSRA_TME	BIT(7)
+#define RWTCSRB		8
 
 #define RWDT_DEFAULT_TIMEOUT 60U
 
-static const unsigned int clk_divs[] = { 1, 4, 16, 32, 64, 128, 1024 };
+/*
+ * In probe, clk_rate is checked to be not more than 16 bit * biggest clock
+ * divider (12 bits). d is only a factor to fully utilize the WDT counter and
+ * will not exceed its 16 bits. Thus, no overflow, we stay below 32 bits.
+ */
+#define MUL_BY_CLKS_PER_SEC(p, d) \
+	DIV_ROUND_UP((d) * (p)->clk_rate, clk_divs[(p)->cks])
+
+/* d is 16 bit, clk_divs 12 bit -> no 32 bit overflow */
+#define DIV_BY_CLKS_PER_SEC(p, d) ((d) * clk_divs[(p)->cks] / (p)->clk_rate)
+
+static const unsigned int clk_divs[] = { 1, 4, 16, 32, 64, 128, 1024, 4096 };
 
 static bool nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, bool, 0);
@@ -36,8 +48,7 @@ MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 struct rwdt_priv {
 	void __iomem *base;
 	struct watchdog_device wdev;
-	struct clk *clk;
-	unsigned int clks_per_sec;
+	unsigned long clk_rate;
 	u8 cks;
 };
 
@@ -55,7 +66,7 @@ static int rwdt_init_timeout(struct watchdog_device *wdev)
 {
 	struct rwdt_priv *priv = watchdog_get_drvdata(wdev);
 
-	rwdt_write(priv, 65536 - wdev->timeout * priv->clks_per_sec, RWTCNT);
+	rwdt_write(priv, 65536 - MUL_BY_CLKS_PER_SEC(priv, wdev->timeout), RWTCNT);
 
 	return 0;
 }
@@ -64,8 +75,9 @@ static int rwdt_start(struct watchdog_device *wdev)
 {
 	struct rwdt_priv *priv = watchdog_get_drvdata(wdev);
 
-	clk_prepare_enable(priv->clk);
+	pm_runtime_get_sync(wdev->parent);
 
+	rwdt_write(priv, 0, RWTCSRB);
 	rwdt_write(priv, priv->cks, RWTCSRA);
 	rwdt_init_timeout(wdev);
 
@@ -82,7 +94,7 @@ static int rwdt_stop(struct watchdog_device *wdev)
 	struct rwdt_priv *priv = watchdog_get_drvdata(wdev);
 
 	rwdt_write(priv, priv->cks, RWTCSRA);
-	clk_disable_unprepare(priv->clk);
+	pm_runtime_put(wdev->parent);
 
 	return 0;
 }
@@ -92,7 +104,7 @@ static unsigned int rwdt_get_timeleft(struct watchdog_device *wdev)
 	struct rwdt_priv *priv = watchdog_get_drvdata(wdev);
 	u16 val = readw_relaxed(priv->base + RWTCNT);
 
-	return DIV_ROUND_CLOSEST(65536 - val, priv->clks_per_sec);
+	return DIV_BY_CLKS_PER_SEC(priv, 65536 - val);
 }
 
 static const struct watchdog_info rwdt_ident = {
@@ -112,8 +124,8 @@ static int rwdt_probe(struct platform_device *pdev)
 {
 	struct rwdt_priv *priv;
 	struct resource *res;
-	unsigned long rate;
-	unsigned int clks_per_sec;
+	struct clk *clk;
+	unsigned long clks_per_sec;
 	int ret, i;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
@@ -125,36 +137,40 @@ static int rwdt_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->base))
 		return PTR_ERR(priv->base);
 
-	priv->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(priv->clk))
-		return PTR_ERR(priv->clk);
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	pm_runtime_enable(&pdev->dev);
 
-	rate = clk_get_rate(priv->clk);
-	if (!rate)
-		return -ENOENT;
+	pm_runtime_get_sync(&pdev->dev);
+	priv->clk_rate = clk_get_rate(clk);
+	pm_runtime_put(&pdev->dev);
+
+	if (!priv->clk_rate) {
+		ret = -ENOENT;
+		goto out_pm_disable;
+	}
 
 	for (i = ARRAY_SIZE(clk_divs) - 1; i >= 0; i--) {
-		clks_per_sec = DIV_ROUND_UP(rate, clk_divs[i]);
-		if (clks_per_sec) {
-			priv->clks_per_sec = clks_per_sec;
+		clks_per_sec = priv->clk_rate / clk_divs[i];
+		if (clks_per_sec && clks_per_sec < 65536) {
 			priv->cks = i;
 			break;
 		}
 	}
 
-	if (!clks_per_sec) {
+	if (i < 0) {
 		dev_err(&pdev->dev, "Can't find suitable clock divider\n");
-		return -ERANGE;
+		ret = -ERANGE;
+		goto out_pm_disable;
 	}
 
-	pm_runtime_enable(&pdev->dev);
-	pm_runtime_get_sync(&pdev->dev);
-
 	priv->wdev.info = &rwdt_ident,
 	priv->wdev.ops = &rwdt_ops,
 	priv->wdev.parent = &pdev->dev;
 	priv->wdev.min_timeout = 1;
-	priv->wdev.max_timeout = 65536 / clks_per_sec;
+	priv->wdev.max_timeout = DIV_BY_CLKS_PER_SEC(priv, 65536);
 	priv->wdev.timeout = min(priv->wdev.max_timeout, RWDT_DEFAULT_TIMEOUT);
 
 	platform_set_drvdata(pdev, priv);
@@ -167,13 +183,14 @@ static int rwdt_probe(struct platform_device *pdev)
 		dev_warn(&pdev->dev, "Specified timeout value invalid, using default\n");
 
 	ret = watchdog_register_device(&priv->wdev);
-	if (ret < 0) {
-		pm_runtime_put(&pdev->dev);
-		pm_runtime_disable(&pdev->dev);
-		return ret;
-	}
+	if (ret < 0)
+		goto out_pm_disable;
 
 	return 0;
+
+ out_pm_disable:
+	pm_runtime_disable(&pdev->dev);
+	return ret;
 }
 
 static int rwdt_remove(struct platform_device *pdev)
@@ -181,7 +198,6 @@ static int rwdt_remove(struct platform_device *pdev)
 	struct rwdt_priv *priv = platform_get_drvdata(pdev);
 
 	watchdog_unregister_device(&priv->wdev);
-	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 
 	return 0;

drivers/watchdog/rt2880_wdt.c

@@ -119,7 +119,7 @@ static int rt288x_wdt_bootcause(void)
 	return 0;
 }
 
-static struct watchdog_info rt288x_wdt_info = {
+static const struct watchdog_info rt288x_wdt_info = {
 	.identity = "Ralink Watchdog",
 	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
 };
@@ -152,7 +152,7 @@ static int rt288x_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(rt288x_wdt_clk))
 		return PTR_ERR(rt288x_wdt_clk);
 
-	rt288x_wdt_reset = devm_reset_control_get(&pdev->dev, NULL);
+	rt288x_wdt_reset = devm_reset_control_get_exclusive(&pdev->dev, NULL);
 	if (!IS_ERR(rt288x_wdt_reset))
 		reset_control_deassert(rt288x_wdt_reset);
 

drivers/watchdog/sc1200wdt.c

@@ -342,7 +342,7 @@ static int __init sc1200wdt_probe(void)
 
 #if defined CONFIG_PNP
 
-static struct pnp_device_id scl200wdt_pnp_devices[] = {
+static const struct pnp_device_id scl200wdt_pnp_devices[] = {
 	/* National Semiconductor PC87307/PC97307 watchdog component */
 	{.id = "NSC0800", .driver_data = 0},
 	{.id = ""},

drivers/watchdog/sp805_wdt.c

@@ -281,7 +281,7 @@ static int __maybe_unused sp805_wdt_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(sp805_wdt_dev_pm_ops, sp805_wdt_suspend,
 		sp805_wdt_resume);
 
-static struct amba_id sp805_wdt_ids[] = {
+static const struct amba_id sp805_wdt_ids[] = {
 	{
 		.id	= 0x00141805,
 		.mask	= 0x00ffffff,

drivers/watchdog/stm32_iwdg.c

@@ -140,7 +140,7 @@ static const struct watchdog_info stm32_iwdg_info = {
 	.identity	= "STM32 Independent Watchdog",
 };
 
-static struct watchdog_ops stm32_iwdg_ops = {
+static const struct watchdog_ops stm32_iwdg_ops = {
 	.owner		= THIS_MODULE,
 	.start		= stm32_iwdg_start,
 	.ping		= stm32_iwdg_ping,

drivers/watchdog/ts72xx_wdt.c

@@ -112,7 +112,7 @@ static const struct watchdog_info ts72xx_wdt_ident = {
 	.identity		= "TS-72XX WDT",
 };
 
-static struct watchdog_ops ts72xx_wdt_ops = {
+static const struct watchdog_ops ts72xx_wdt_ops = {
 	.owner		= THIS_MODULE,
 	.start		= ts72xx_wdt_start,
 	.stop		= ts72xx_wdt_stop,

drivers/watchdog/w83627hf_wdt.c

@@ -429,7 +429,7 @@ static int __init wdt_init(void)
 {
 	int ret;
 	int chip;
-	const char * const chip_name[] = {
+	static const char * const chip_name[] = {
 		"W83627HF",
 		"W83627S",
 		"W83697HF",

drivers/watchdog/ziirave_wdt.c

@@ -737,7 +737,7 @@ static int ziirave_wdt_remove(struct i2c_client *client)
 	return 0;
 }
 
-static struct i2c_device_id ziirave_wdt_id[] = {
+static const struct i2c_device_id ziirave_wdt_id[] = {
 	{ "rave-wdt", 0 },
 	{ }
 };

drivers/watchdog/zx2967_wdt.c

@@ -229,7 +229,7 @@ static int zx2967_wdt_probe(struct platform_device *pdev)
 	}
 	clk_set_rate(wdt->clock, ZX2967_WDT_CLK_FREQ);
 
-	rstc = devm_reset_control_get(dev, NULL);
+	rstc = devm_reset_control_get_exclusive(dev, NULL);
 	if (IS_ERR(rstc)) {
 		dev_err(dev, "failed to get rstc");
 		ret = PTR_ERR(rstc);