提交 934e4885 编写于 作者: L Lori Hikichi 提交者: Mark Brown

ASoC: cygnus: Remove support for 8 bit audio and for mono

These modes of operation were not working properly and it is
unclear if the hardware could fully support these modes properly.
There is little to be gained by enabling these modes, therefore,
we will just remove support.
Signed-off-by: NLori Hikichi <lori.hikichi@broadcom.com>
Signed-off-by: NMark Brown <broonie@kernel.org>
上级 fcf30f3b
......@@ -655,23 +655,10 @@ static int cygnus_ssp_hw_params(struct snd_pcm_substream *substream,
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
value = readl(aio->cygaud->audio + aio->regs.bf_sourcech_cfg);
value &= ~BIT(BF_SRC_CFGX_BUFFER_PAIR_ENABLE);
/* Configure channels as mono or stereo/TDM */
if (params_channels(params) == 1)
value |= BIT(BF_SRC_CFGX_SAMPLE_CH_MODE);
else
value &= ~BIT(BF_SRC_CFGX_SAMPLE_CH_MODE);
value &= ~BIT(BF_SRC_CFGX_SAMPLE_CH_MODE);
writel(value, aio->cygaud->audio + aio->regs.bf_sourcech_cfg);
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S8:
if (aio->port_type == PORT_SPDIF) {
dev_err(aio->cygaud->dev,
"SPDIF does not support 8bit format\n");
return -EINVAL;
}
bitres = 8;
break;
case SNDRV_PCM_FORMAT_S16_LE:
bitres = 16;
break;
......@@ -1148,11 +1135,10 @@ static const struct snd_soc_dai_ops cygnus_spdif_dai_ops = {
#define INIT_CPU_DAI(num) { \
.name = "cygnus-ssp" #num, \
.playback = { \
.channels_min = 1, \
.channels_min = 2, \
.channels_max = 16, \
.rates = SNDRV_PCM_RATE_KNOT, \
.formats = SNDRV_PCM_FMTBIT_S8 | \
SNDRV_PCM_FMTBIT_S16_LE | \
.formats = SNDRV_PCM_FMTBIT_S16_LE | \
SNDRV_PCM_FMTBIT_S32_LE, \
}, \
.capture = { \
......@@ -1160,7 +1146,7 @@ static const struct snd_soc_dai_ops cygnus_spdif_dai_ops = {
.channels_max = 16, \
.rates = SNDRV_PCM_RATE_KNOT, \
.formats = SNDRV_PCM_FMTBIT_S16_LE | \
SNDRV_PCM_FMTBIT_S32_LE, \
SNDRV_PCM_FMTBIT_S32_LE, \
}, \
.ops = &cygnus_ssp_dai_ops, \
.suspend = cygnus_ssp_suspend, \
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册
新手
引导
客服 返回
顶部