ehci-orion: mbus decode window support

Make it possible to pass mbus_dram_target_info to the ehci-orion
driver via the platform data, make the ehci-orion driver program
the window registers based on this data if it is passed in, and
make the Orion platform setup code use this method instead of
programming the EHCI mbus window registers by hand.
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Reviewed-by: NTzachi Perelstein <tzachi@marvell.com>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NNicolas Pitre <nico@marvell.com>

arch/arm/mach-orion/addr-map.c

@@ -103,15 +103,6 @@
 #define ETH_MAX_WIN		6
 #define ETH_MAX_REMAP_WIN	4
 
-/*
- * USB Address Decode Windows registers
- */
-#define USB_WIN_CTRL(i, w)	((i == 0) ? ORION_USB0_REG(0x320 + ((w) << 4)) \
-					: ORION_USB1_REG(0x320 + ((w) << 4)))
-#define USB_WIN_BASE(i, w)	((i == 0) ? ORION_USB0_REG(0x324 + ((w) << 4)) \
-					: ORION_USB1_REG(0x324 + ((w) << 4)))
-#define USB_MAX_WIN		4
-
 /*
  * SATA Address Decode Windows registers
  */
@@ -262,46 +253,6 @@ void __init orion_setup_cpu_wins(void)
 	orion_mbus_dram_info.num_cs = cs;
 }
 
-void __init orion_setup_usb_wins(void)
-{
-	int i;
-	u32 usb_if, dev, rev;
-	u32 max_usb_if = 1;
-
-	orion_pcie_id(&dev, &rev);
-	if (dev == MV88F5182_DEV_ID)
-		max_usb_if = 2;
-
-	for (usb_if = 0; usb_if < max_usb_if; usb_if++) {
-		/*
-		 * First, disable and clear windows
-		 */
-		for (i = 0; i < USB_MAX_WIN; i++) {
-			orion_write(USB_WIN_BASE(usb_if, i), 0);
-			orion_write(USB_WIN_CTRL(usb_if, i), 0);
-		}
-
-		/*
-		 * Setup windows for DDR banks.
-		 */
-		for (i = 0; i < DDR_MAX_CS; i++) {
-			u32 base, size;
-			size = orion_read(DDR_SIZE_CS(i));
-			base = orion_read(DDR_BASE_CS(i));
-			if (size & DDR_BANK_EN) {
-				base = DDR_REG_TO_BASE(base);
-				size = DDR_REG_TO_SIZE(size);
-				orion_write(USB_WIN_CTRL(usb_if, i),
-						((size-1) & 0xffff0000) |
-						(ATTR_DDR_CS(i) << 8) |
-						(TARGET_DDR << 4) | WIN_EN);
-				orion_write(USB_WIN_BASE(usb_if, i),
-						base & 0xffff0000);
-			}
-		}
-	}
-}
-
 void __init orion_setup_eth_wins(void)
 {
 	int i;

arch/arm/mach-orion/common.c

@@ -23,6 +23,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/arch/hardware.h>
+#include <asm/arch/platform.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -149,6 +150,10 @@ static struct resource orion_ehci1_resources[] = {
 	},
 };
 
+static struct orion_ehci_data orion_ehci_data = {
+	.dram		= &orion_mbus_dram_info,
+};
+
 static u64 ehci_dmamask = 0xffffffffUL;
 
 static struct platform_device orion_ehci0 = {
@@ -157,6 +162,7 @@ static struct platform_device orion_ehci0 = {
 	.dev		= {
 		.dma_mask		= &ehci_dmamask,
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &orion_ehci_data,
 	},
 	.resource	= orion_ehci0_resources,
 	.num_resources	= ARRAY_SIZE(orion_ehci0_resources),
@@ -168,6 +174,7 @@ static struct platform_device orion_ehci1 = {
 	.dev		= {
 		.dma_mask		= &ehci_dmamask,
 		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &orion_ehci_data,
 	},
 	.resource	= orion_ehci1_resources,
 	.num_resources	= ARRAY_SIZE(orion_ehci1_resources),
@@ -334,7 +341,6 @@ void __init orion_init(void)
 	 * Setup Orion address map
 	 */
 	orion_setup_cpu_wins();
-	orion_setup_usb_wins();
 	orion_setup_eth_wins();
 	if (dev == MV88F5182_DEV_ID)
 		orion_setup_sata_wins();

arch/arm/mach-orion/common.h

@@ -33,7 +33,6 @@ extern struct mbus_dram_target_info orion_mbus_dram_info;
 void orion_setup_cpu_win(enum orion_target target, u32 base, u32 size, int remap);
 void orion_setup_cpu_wins(void);
 void orion_setup_eth_wins(void);
-void orion_setup_usb_wins(void);
 void orion_setup_sata_wins(void);
 
 /*

drivers/usb/host/ehci-orion.c

@@ -11,15 +11,19 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/mbus.h>
 #include <asm/arch/orion.h>
+#include <asm/arch/platform.h>
 
 #define rdl(off)	__raw_readl(hcd->regs + (off))
 #define wrl(off, val)	__raw_writel((val), hcd->regs + (off))
 
-#define USB_CAUSE		0x310
-#define USB_MASK		0x314
 #define USB_CMD			0x140
 #define USB_MODE		0x1a8
+#define USB_CAUSE		0x310
+#define USB_MASK		0x314
+#define USB_WINDOW_CTRL(i)	(0x320 + ((i) << 4))
+#define USB_WINDOW_BASE(i)	(0x324 + ((i) << 4))
 #define USB_IPG			0x360
 #define USB_PHY_PWR_CTRL	0x400
 #define USB_PHY_TX_CTRL		0x420
@@ -162,8 +166,30 @@ static const struct hc_driver ehci_orion_hc_driver = {
 	.bus_resume = ehci_bus_resume,
 };
 
+static void __init
+ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
+				struct mbus_dram_target_info *dram)
+{
+	int i;
+
+	for (i = 0; i < 4; i++) {
+		wrl(USB_WINDOW_CTRL(i), 0);
+		wrl(USB_WINDOW_BASE(i), 0);
+	}
+
+	for (i = 0; i < dram->num_cs; i++) {
+		struct mbus_dram_window *cs = dram->cs + i;
+
+		wrl(USB_WINDOW_CTRL(i), ((cs->size - 1) & 0xffff0000) |
+					(cs->mbus_attr << 8) |
+					(dram->mbus_dram_target_id << 4) | 1);
+		wrl(USB_WINDOW_BASE(i), cs->base);
+	}
+}
+
 static int __init ehci_orion_drv_probe(struct platform_device *pdev)
 {
+	struct orion_ehci_data *pd = pdev->dev.platform_data;
 	struct resource *res;
 	struct usb_hcd *hcd;
 	struct ehci_hcd *ehci;
@@ -226,6 +252,12 @@ static int __init ehci_orion_drv_probe(struct platform_device *pdev)
 	ehci->is_tdi_rh_tt = 1;
 	ehci->sbrn = 0x20;
 
+	/*
+	 * (Re-)program MBUS remapping windows if we are asked to.
+	 */
+	if (pd != NULL && pd->dram != NULL)
+		ehci_orion_conf_mbus_windows(hcd, pd->dram);
+
 	/*
 	 * setup Orion USB controller
 	 */

include/asm-arm/arch-orion/platform.h

@@ -11,6 +11,14 @@
 #ifndef __ASM_ARCH_PLATFORM_H__
 #define __ASM_ARCH_PLATFORM_H__
 
+/*
+ * Orion EHCI platform driver data.
+ */
+struct orion_ehci_data {
+	struct mbus_dram_target_info	*dram;
+};
+
+
 /*
  * Device bus NAND private data
  */
@@ -22,4 +30,5 @@ struct orion_nand_data {
 	u8 width;	/* buswidth */
 };
 
+
 #endif