提交 922539a0 编写于 作者: J Jean Delvare 提交者: Jean Delvare

i2c: normal_i2c can be made const (rtc drivers)

Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NAlessandro Zummo <alessandro.zummo@towertech.it>
上级 bfb6df24
......@@ -16,7 +16,7 @@
#define DRV_VERSION "0.3"
/* Addresses to scan: none. This chip cannot be detected. */
static unsigned short normal_i2c[] = { I2C_CLIENT_END };
static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
/* Insmod parameters */
I2C_CLIENT_INSMOD;
......
......@@ -61,7 +61,7 @@
/* i2c configuration */
#define ISL1208_I2C_ADDR 0xde
static unsigned short normal_i2c[] = {
static const unsigned short normal_i2c[] = {
ISL1208_I2C_ADDR>>1, I2C_CLIENT_END
};
I2C_CLIENT_INSMOD; /* defines addr_data */
......
......@@ -54,7 +54,7 @@
#define MAX6900_I2C_ADDR 0xa0
static unsigned short normal_i2c[] = {
static const unsigned short normal_i2c[] = {
MAX6900_I2C_ADDR >> 1,
I2C_CLIENT_END
};
......
......@@ -25,7 +25,7 @@
* located at 0x51 will pass the validation routine due to
* the way the registers are implemented.
*/
static unsigned short normal_i2c[] = { I2C_CLIENT_END };
static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
/* Module parameters */
I2C_CLIENT_INSMOD;
......
......@@ -40,7 +40,7 @@ struct pcf8583 {
#define CTRL_ALARM 0x02
#define CTRL_TIMER 0x01
static unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END };
static const unsigned short normal_i2c[] = { 0x50, I2C_CLIENT_END };
/* Module parameters */
I2C_CLIENT_INSMOD;
......
......@@ -32,7 +32,7 @@
* unknown chips, the user must explicitly set the probe parameter.
*/
static unsigned short normal_i2c[] = { I2C_CLIENT_END };
static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
/* Insmod parameters */
I2C_CLIENT_INSMOD;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册