Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
大约 1 年 前同步成功

通知 158
Star 36
Fork 7
cloud-kernel
cloud-kernel

体验新版 GitCode，发现更多精彩内容 >>

提交 9219a3b9 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus 

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (37 commits)
  MIPS: Only write c0_framemask on CPUs which have this register.
  MIPS: Alchemy: new userspace suspend interface for development boards.
  MIPS: Alchemy: dbdma suspend/resume support.
  MIPS: Alchemy: Fix up PM code on Au1550/Au1200
  MIPS: Alchemy: move calc_clock function.
  MIPS: Alchemy: RTC counter clocksource / clockevent support.
  MIPS: make cp0 counter clocksource/event usable as fallback.
  MIPS: Alchemy: remove cpu_table.
  MIPS: Alchemy: remove get/set_au1x00_lcd_clock().
  MIPS: Print irq handler description
  MIPS: Alchemy: pb1200: update CPLD cascade irq handler.
  MIPS: Alchemy: update core interrupt code.
  MIPS: Alchemy: move commandline mangling out of common code
  MIPS: Alchemy: devboards: consolidate files
  MIPS: Alchemy: Move development board code to common subdirectory
  MIPS: Add Cavium OCTEON to arch/mips/Kconfig
  MIPS: Add defconfig for Cavium OCTEON.
  MIPS: Adjust the dma-common.c platform hooks.
  MIPS: Add Cavium OCTEON slot into proper tlb category.
  MIPS:  Compute branch returns for Cavium OCTEON specific branch instructions.
  ...
上级 23ead729 cde15b59
展开全部 隐藏空白更改
内联 并排
Showing with 18974 addition and 2031 deletion
arch/mips/Kconfig
浏览文件 @ 9219a3b9
......@@ -595,6 +595,44 @@ config WR_PPMC
This enables support for the Wind River MIPS32 4KC PPMC evaluation
board, which is based on GT64120 bridge chip.
config CAVIUM_OCTEON_SIMULATOR
bool "Support for the Cavium Networks Octeon Simulator"
select CEVT_R4K
select 64BIT_PHYS_ADDR
select DMA_COHERENT
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select CPU_CAVIUM_OCTEON
help
The Octeon simulator is software performance model of the Cavium
Octeon Processor. It supports simulating Octeon processors on x86
hardware.
config CAVIUM_OCTEON_REFERENCE_BOARD
bool "Support for the Cavium Networks Octeon reference board"
select CEVT_R4K
select 64BIT_PHYS_ADDR
select DMA_COHERENT
select SYS_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_HIGHMEM
select SYS_HAS_EARLY_PRINTK
select CPU_CAVIUM_OCTEON
select SWAP_IO_SPACE
help
This option supports all of the Octeon reference boards from Cavium
Networks. It builds a kernel that dynamically determines the Octeon
CPU type and supports all known board reference implementations.
Some of the supported boards are:
EBT3000
EBH3000
EBH3100
Thunder
Kodama
Hikari
Say Y here for most Octeon reference boards.
endchoice
source "arch/mips/alchemy/Kconfig"
......@@ -607,6 +645,7 @@ source "arch/mips/sgi-ip27/Kconfig"
source "arch/mips/sibyte/Kconfig"
source "arch/mips/txx9/Kconfig"
source "arch/mips/vr41xx/Kconfig"
source "arch/mips/cavium-octeon/Kconfig"
endmenu
......@@ -682,7 +721,11 @@ config CEVT_DS1287
config CEVT_GT641XX
bool
config CEVT_R4K_LIB
bool
config CEVT_R4K
select CEVT_R4K_LIB
bool
config CEVT_SB1250
......@@ -697,7 +740,11 @@ config CSRC_BCM1480
config CSRC_IOASIC
bool
config CSRC_R4K_LIB
bool
config CSRC_R4K
select CSRC_R4K_LIB
bool
config CSRC_SB1250
......@@ -835,6 +882,9 @@ config IRQ_GT641XX
config IRQ_GIC
bool
config IRQ_CPU_OCTEON
bool
config MIPS_BOARDS_GEN
bool
......@@ -924,7 +974,7 @@ config BOOT_ELF32
config MIPS_L1_CACHE_SHIFT
int
default "4" if MACH_DECSTATION || MIKROTIK_RB532
default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM
default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM || CPU_CAVIUM_OCTEON
default "4" if PMC_MSP4200_EVAL
default "5"
......@@ -1185,6 +1235,23 @@ config CPU_SB1
select CPU_SUPPORTS_HIGHMEM
select WEAK_ORDERING
config CPU_CAVIUM_OCTEON
bool "Cavium Octeon processor"
select IRQ_CPU
select IRQ_CPU_OCTEON
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_64BIT_KERNEL
select SYS_SUPPORTS_SMP
select NR_CPUS_DEFAULT_16
select WEAK_ORDERING
select WEAK_REORDERING_BEYOND_LLSC
select CPU_SUPPORTS_HIGHMEM
help
The Cavium Octeon processor is a highly integrated chip containing
many ethernet hardware widgets for networking tasks. The processor
can have up to 16 Mips64v2 cores and 8 integrated gigabit ethernets.
Full details can be found at http://www.caviumnetworks.com.
endchoice
config SYS_HAS_CPU_LOONGSON2
......@@ -1285,7 +1352,7 @@ config CPU_MIPSR1
config CPU_MIPSR2
bool
default y if CPU_MIPS32_R2 || CPU_MIPS64_R2
default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 || CPU_CAVIUM_OCTEON
config SYS_SUPPORTS_32BIT_KERNEL
bool
......
arch/mips/Makefile
浏览文件 @ 9219a3b9
......@@ -144,6 +144,10 @@ cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-march=sb1,-march=r5000) \
cflags-$(CONFIG_CPU_R8000) += -march=r8000 -Wa,--trap
cflags-$(CONFIG_CPU_R10000) += $(call cc-option,-march=r10000,-march=r8000) \
-Wa,--trap
cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += $(call cc-option,-march=octeon) -Wa,--trap
ifeq (,$(findstring march=octeon, $(cflags-$(CONFIG_CPU_CAVIUM_OCTEON))))
cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
endif
cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,)
cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,)
......@@ -184,84 +188,84 @@ cflags-$(CONFIG_SOC_AU1X00) += -I$(srctree)/arch/mips/include/asm/mach-au1x00
#
# AMD Alchemy Pb1000 eval board
#
libs-$(CONFIG_MIPS_PB1000) += arch/mips/alchemy/pb1000/
core-$(CONFIG_MIPS_PB1000) += arch/mips/alchemy/devboards/
cflags-$(CONFIG_MIPS_PB1000) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00
load-$(CONFIG_MIPS_PB1000) += 0xffffffff80100000
#
# AMD Alchemy Pb1100 eval board
#
libs-$(CONFIG_MIPS_PB1100) += arch/mips/alchemy/pb1100/
core-$(CONFIG_MIPS_PB1100) += arch/mips/alchemy/devboards/
cflags-$(CONFIG_MIPS_PB1100) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00
load-$(CONFIG_MIPS_PB1100) += 0xffffffff80100000
#
# AMD Alchemy Pb1500 eval board
#
libs-$(CONFIG_MIPS_PB1500) += arch/mips/alchemy/pb1500/
core-$(CONFIG_MIPS_PB1500) += arch/mips/alchemy/devboards/
cflags-$(CONFIG_MIPS_PB1500) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00
load-$(CONFIG_MIPS_PB1500) += 0xffffffff80100000
#
# AMD Alchemy Pb1550 eval board
#
libs-$(CONFIG_MIPS_PB1550) += arch/mips/alchemy/pb1550/
core-$(CONFIG_MIPS_PB1550) += arch/mips/alchemy/devboards/
cflags-$(CONFIG_MIPS_PB1550) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00
load-$(CONFIG_MIPS_PB1550) += 0xffffffff80100000
#
# AMD Alchemy Pb1200 eval board
#
libs-$(CONFIG_MIPS_PB1200) += arch/mips/alchemy/pb1200/
core-$(CONFIG_MIPS_PB1200) += arch/mips/alchemy/devboards/
cflags-$(CONFIG_MIPS_PB1200) += -I$(srctree)/arch/mips/include/asm/mach-pb1x00
load-$(CONFIG_MIPS_PB1200) += 0xffffffff80100000
#
# AMD Alchemy Db1000 eval board
#
libs-$(CONFIG_MIPS_DB1000) += arch/mips/alchemy/db1x00/
core-$(CONFIG_MIPS_DB1000) += arch/mips/alchemy/devboards/
cflags-$(CONFIG_MIPS_DB1000) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
load-$(CONFIG_MIPS_DB1000) += 0xffffffff80100000
#
# AMD Alchemy Db1100 eval board
#
libs-$(CONFIG_MIPS_DB1100) += arch/mips/alchemy/db1x00/
core-$(CONFIG_MIPS_DB1100) += arch/mips/alchemy/devboards/
cflags-$(CONFIG_MIPS_DB1100) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
load-$(CONFIG_MIPS_DB1100) += 0xffffffff80100000
#
# AMD Alchemy Db1500 eval board
#
libs-$(CONFIG_MIPS_DB1500) += arch/mips/alchemy/db1x00/
core-$(CONFIG_MIPS_DB1500) += arch/mips/alchemy/devboards/
cflags-$(CONFIG_MIPS_DB1500) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
load-$(CONFIG_MIPS_DB1500) += 0xffffffff80100000
#
# AMD Alchemy Db1550 eval board
#
libs-$(CONFIG_MIPS_DB1550) += arch/mips/alchemy/db1x00/
core-$(CONFIG_MIPS_DB1550) += arch/mips/alchemy/devboards/
cflags-$(CONFIG_MIPS_DB1550) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
load-$(CONFIG_MIPS_DB1550) += 0xffffffff80100000
#
# AMD Alchemy Db1200 eval board
#
libs-$(CONFIG_MIPS_DB1200) += arch/mips/alchemy/pb1200/
core-$(CONFIG_MIPS_DB1200) += arch/mips/alchemy/devboards/
cflags-$(CONFIG_MIPS_DB1200) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
load-$(CONFIG_MIPS_DB1200) += 0xffffffff80100000
#
# AMD Alchemy Bosporus eval board
#
libs-$(CONFIG_MIPS_BOSPORUS) += arch/mips/alchemy/db1x00/
core-$(CONFIG_MIPS_BOSPORUS) += arch/mips/alchemy/devboards/
cflags-$(CONFIG_MIPS_BOSPORUS) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
load-$(CONFIG_MIPS_BOSPORUS) += 0xffffffff80100000
#
# AMD Alchemy Mirage eval board
#
libs-$(CONFIG_MIPS_MIRAGE) += arch/mips/alchemy/db1x00/
core-$(CONFIG_MIPS_MIRAGE) += arch/mips/alchemy/devboards/
cflags-$(CONFIG_MIPS_MIRAGE) += -I$(srctree)/arch/mips/include/asm/mach-db1x00
load-$(CONFIG_MIPS_MIRAGE) += 0xffffffff80100000
......@@ -586,6 +590,18 @@ core-$(CONFIG_TOSHIBA_RBTX4927) += arch/mips/txx9/rbtx4927/
core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/rbtx4938/
core-$(CONFIG_TOSHIBA_RBTX4939) += arch/mips/txx9/rbtx4939/
#
# Cavium Octeon
#
core-$(CONFIG_CPU_CAVIUM_OCTEON) += arch/mips/cavium-octeon/
cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -I$(srctree)/arch/mips/include/asm/mach-cavium-octeon
core-$(CONFIG_CPU_CAVIUM_OCTEON) += arch/mips/cavium-octeon/executive/
ifdef CONFIG_CAVIUM_OCTEON_2ND_KERNEL
load-$(CONFIG_CPU_CAVIUM_OCTEON) += 0xffffffff84100000
else
load-$(CONFIG_CPU_CAVIUM_OCTEON) += 0xffffffff81100000
endif
cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic
drivers-$(CONFIG_PCI) += arch/mips/pci/
......
arch/mips/alchemy/Kconfig
浏览文件 @ 9219a3b9
......@@ -128,9 +128,10 @@ config SOC_AU1200
config SOC_AU1X00
bool
select 64BIT_PHYS_ADDR
select CEVT_R4K
select CSRC_R4K
select CEVT_R4K_LIB
select CSRC_R4K_LIB
select IRQ_CPU
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_APM_EMULATION
select GENERIC_HARDIRQS_NO__DO_IRQ
arch/mips/alchemy/common/Makefile
浏览文件 @ 9219a3b9
......@@ -6,8 +6,8 @@
#
obj-y += prom.o irq.o puts.o time.o reset.o \
au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
sleeper.o cputable.o dma.o dbdma.o gpio.o
clocks.o platform.o power.o setup.o \
sleeper.o dma.o dbdma.o gpio.o
obj-$(CONFIG_PCI) += pci.o
......
arch/mips/alchemy/common/au1xxx_irqmap.c 已删除 100644 → 0
浏览文件 @ 23ead729
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx processor specific IRQ tables
*
* Copyright 2004 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <au1000.h>
/* The IC0 interrupt table. This is processor, rather than
* board dependent, so no reason to keep this info in the board
* dependent files.
*
* Careful if you change match 2 request!
* The interrupt handler is called directly from the low level dispatch code.
*/
struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
#if defined(CONFIG_SOC_AU1000)
{ AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1500)
{ AU1500_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1500_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1500_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1100)
{ AU1100_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1100_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1100_SD_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1100_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1100_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
/* { AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0 }, */
{ AU1100_LCD_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1550)
{ AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_RST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
#elif defined(CONFIG_SOC_AU1200)
{ AU1200_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_SWT_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1200_SD_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_MAE_BE_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_MAE_FE_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_MAE_BOTH_INT, INTC_INT_HIGH_LEVEL, 0 },
#else
#error "Error: Unknown Alchemy SOC"
#endif
};
int __initdata au1xxx_ic0_nr_irqs = ARRAY_SIZE(au1xxx_ic0_map);
arch/mips/alchemy/common/clocks.c
浏览文件 @ 9219a3b9
......@@ -27,12 +27,21 @@
*/
#include <linux/module.h>
#include <linux/spinlock.h>
#include <asm/time.h>
#include <asm/mach-au1x00/au1000.h>
/*
* I haven't found anyone that doesn't use a 12 MHz source clock,
* but just in case.....
*/
#define AU1000_SRC_CLK 12000000
static unsigned int au1x00_clock; /* Hz */
static unsigned int lcd_clock; /* KHz */
static unsigned long uart_baud_base;
static DEFINE_SPINLOCK(time_lock);
/*
* Set the au1000_clock
*/
......@@ -63,31 +72,45 @@ void set_au1x00_uart_baud_base(unsigned long new_baud_base)
}
/*
* Calculate the Au1x00's LCD clock based on the current
* cpu clock and the system bus clock, and try to keep it
* below 40 MHz (the Pb1000 board can lock-up if the LCD
* clock is over 40 MHz).
* We read the real processor speed from the PLL. This is important
* because it is more accurate than computing it from the 32 KHz
* counter, if it exists. If we don't have an accurate processor
* speed, all of the peripherals that derive their clocks based on
* this advertised speed will introduce error and sometimes not work
* properly. This function is futher convoluted to still allow configurations
* to do that in case they have really, really old silicon with a
* write-only PLL register. -- Dan
*/
void set_au1x00_lcd_clock(void)
unsigned long au1xxx_calc_clock(void)
{
unsigned int static_cfg0;
unsigned int sys_busclk = (get_au1x00_speed() / 1000) /
((int)(au_readl(SYS_POWERCTRL) & 0x03) + 2);
unsigned long cpu_speed;
unsigned long flags;
static_cfg0 = au_readl(MEM_STCFG0);
spin_lock_irqsave(&time_lock, flags);
if (static_cfg0 & (1 << 11))
lcd_clock = sys_busclk / 5; /* note: BCLK switching fails with D5 */
/*
* On early Au1000, sys_cpupll was write-only. Since these
* silicon versions of Au1000 are not sold by AMD, we don't bend
* over backwards trying to determine the frequency.
*/
if (au1xxx_cpu_has_pll_wo())
#ifdef CONFIG_SOC_AU1000_FREQUENCY
cpu_speed = CONFIG_SOC_AU1000_FREQUENCY;
#else
cpu_speed = 396000000;
#endif
else
lcd_clock = sys_busclk / 4;
cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
if (lcd_clock > 50000) /* Epson MAX */
printk(KERN_WARNING "warning: LCD clock too high (%u KHz)\n",
lcd_clock);
}
/* On Alchemy CPU:counter ratio is 1:1 */
mips_hpt_frequency = cpu_speed;
/* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */
set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
& 0x03) + 2) * 16));
unsigned int get_au1x00_lcd_clock(void)
{
return lcd_clock;
spin_unlock_irqrestore(&time_lock, flags);
set_au1x00_speed(cpu_speed);
return cpu_speed;
}
EXPORT_SYMBOL(get_au1x00_lcd_clock);
arch/mips/alchemy/common/cputable.c 已删除 100644 → 0
浏览文件 @ 23ead729
/*
* arch/mips/au1000/common/cputable.c
*
* Copyright (C) 2004 Dan Malek (dan@embeddededge.com)
* Copied from PowerPC and updated for Alchemy Au1xxx processors.
*
* Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <asm/mach-au1x00/au1000.h>
struct cpu_spec *cur_cpu_spec[NR_CPUS];
/* With some thought, we can probably use the mask to reduce the
* size of the table.
*/
struct cpu_spec cpu_specs[] = {
{ 0xffffffff, 0x00030100, "Au1000 DA", 1, 0, 1 },
{ 0xffffffff, 0x00030201, "Au1000 HA", 1, 0, 1 },
{ 0xffffffff, 0x00030202, "Au1000 HB", 1, 0, 1 },
{ 0xffffffff, 0x00030203, "Au1000 HC", 1, 1, 0 },
{ 0xffffffff, 0x00030204, "Au1000 HD", 1, 1, 0 },
{ 0xffffffff, 0x01030200, "Au1500 AB", 1, 1, 0 },
{ 0xffffffff, 0x01030201, "Au1500 AC", 0, 1, 0 },
{ 0xffffffff, 0x01030202, "Au1500 AD", 0, 1, 0 },
{ 0xffffffff, 0x02030200, "Au1100 AB", 1, 1, 0 },
{ 0xffffffff, 0x02030201, "Au1100 BA", 1, 1, 0 },
{ 0xffffffff, 0x02030202, "Au1100 BC", 1, 1, 0 },
{ 0xffffffff, 0x02030203, "Au1100 BD", 0, 1, 0 },
{ 0xffffffff, 0x02030204, "Au1100 BE", 0, 1, 0 },
{ 0xffffffff, 0x03030200, "Au1550 AA", 0, 1, 0 },
{ 0xffffffff, 0x04030200, "Au1200 AB", 0, 0, 0 },
{ 0xffffffff, 0x04030201, "Au1200 AC", 1, 0, 0 },
{ 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 }
};
void set_cpuspec(void)
{
struct cpu_spec *sp;
u32 prid;
prid = read_c0_prid();
sp = cpu_specs;
while ((prid & sp->prid_mask) != sp->prid_value)
sp++;
cur_cpu_spec[0] = sp;
}
arch/mips/alchemy/common/dbdma.c
浏览文件 @ 9219a3b9
......@@ -174,6 +174,11 @@ static dbdev_tab_t dbdev_tab[] = {
#define DBDEV_TAB_SIZE ARRAY_SIZE(dbdev_tab)
#ifdef CONFIG_PM
static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][8];
#endif
static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
static dbdev_tab_t *find_dbdev_id(u32 id)
......@@ -975,4 +980,64 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
return nbytes;
}
#ifdef CONFIG_PM
void au1xxx_dbdma_suspend(void)
{
int i;
u32 addr;
addr = DDMA_GLOBAL_BASE;
au1xxx_dbdma_pm_regs[0][0] = au_readl(addr + 0x00);
au1xxx_dbdma_pm_regs[0][1] = au_readl(addr + 0x04);
au1xxx_dbdma_pm_regs[0][2] = au_readl(addr + 0x08);
au1xxx_dbdma_pm_regs[0][3] = au_readl(addr + 0x0c);
/* save channel configurations */
for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) {
au1xxx_dbdma_pm_regs[i][0] = au_readl(addr + 0x00);
au1xxx_dbdma_pm_regs[i][1] = au_readl(addr + 0x04);
au1xxx_dbdma_pm_regs[i][2] = au_readl(addr + 0x08);
au1xxx_dbdma_pm_regs[i][3] = au_readl(addr + 0x0c);
au1xxx_dbdma_pm_regs[i][4] = au_readl(addr + 0x10);
au1xxx_dbdma_pm_regs[i][5] = au_readl(addr + 0x14);
au1xxx_dbdma_pm_regs[i][6] = au_readl(addr + 0x18);
/* halt channel */
au_writel(au1xxx_dbdma_pm_regs[i][0] & ~1, addr + 0x00);
au_sync();
while (!(au_readl(addr + 0x14) & 1))
au_sync();
addr += 0x100; /* next channel base */
}
/* disable channel interrupts */
au_writel(0, DDMA_GLOBAL_BASE + 0x0c);
au_sync();
}
void au1xxx_dbdma_resume(void)
{
int i;
u32 addr;
addr = DDMA_GLOBAL_BASE;
au_writel(au1xxx_dbdma_pm_regs[0][0], addr + 0x00);
au_writel(au1xxx_dbdma_pm_regs[0][1], addr + 0x04);
au_writel(au1xxx_dbdma_pm_regs[0][2], addr + 0x08);
au_writel(au1xxx_dbdma_pm_regs[0][3], addr + 0x0c);
/* restore channel configurations */
for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) {
au_writel(au1xxx_dbdma_pm_regs[i][0], addr + 0x00);
au_writel(au1xxx_dbdma_pm_regs[i][1], addr + 0x04);
au_writel(au1xxx_dbdma_pm_regs[i][2], addr + 0x08);
au_writel(au1xxx_dbdma_pm_regs[i][3], addr + 0x0c);
au_writel(au1xxx_dbdma_pm_regs[i][4], addr + 0x10);
au_writel(au1xxx_dbdma_pm_regs[i][5], addr + 0x14);
au_writel(au1xxx_dbdma_pm_regs[i][6], addr + 0x18);
au_sync();
addr += 0x100; /* next channel base */
}
}
#endif /* CONFIG_PM */
#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
arch/mips/alchemy/common/irq.c
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/alchemy/common/power.c
浏览文件 @ 9219a3b9
......@@ -35,25 +35,12 @@
#include <linux/jiffies.h>
#include <asm/uaccess.h>
#include <asm/cacheflush.h>
#include <asm/mach-au1x00/au1000.h>
#ifdef CONFIG_PM
#define DEBUG 1
#ifdef DEBUG
#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__, ## args)
#else
#define DPRINTK(fmt, args...)
#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
#include <asm/mach-au1x00/au1xxx_dbdma.h>
#endif
static void au1000_calibrate_delay(void);
extern unsigned long save_local_and_disable(int controller);
extern void restore_local_and_enable(int controller, unsigned long mask);
extern void local_enable_irq(unsigned int irq_nr);
static DEFINE_SPINLOCK(pm_lock);
#ifdef CONFIG_PM
/*
* We need to save/restore a bunch of core registers that are
......@@ -65,29 +52,16 @@ static DEFINE_SPINLOCK(pm_lock);
* We only have to save/restore registers that aren't otherwise
* done as part of a driver pm_* function.
*/
static unsigned int sleep_aux_pll_cntrl;
static unsigned int sleep_cpu_pll_cntrl;
static unsigned int sleep_pin_function;
static unsigned int sleep_uart0_inten;
static unsigned int sleep_uart0_fifoctl;
static unsigned int sleep_uart0_linectl;
static unsigned int sleep_uart0_clkdiv;
static unsigned int sleep_uart0_enable;
static unsigned int sleep_usbhost_enable;
static unsigned int sleep_usbdev_enable;
static unsigned int sleep_static_memctlr[4][3];
static unsigned int sleep_uart0_inten;
static unsigned int sleep_uart0_fifoctl;
static unsigned int sleep_uart0_linectl;
static unsigned int sleep_uart0_clkdiv;
static unsigned int sleep_uart0_enable;
static unsigned int sleep_usb[2];
static unsigned int sleep_sys_clocks[5];
static unsigned int sleep_sys_pinfunc;
static unsigned int sleep_static_memctlr[4][3];
/*
* Define this to cause the value you write to /proc/sys/pm/sleep to
* set the TOY timer for the amount of time you want to sleep.
* This is done mainly for testing, but may be useful in other cases.
* The value is number of 32KHz ticks to sleep.
*/
#define SLEEP_TEST_TIMEOUT 1
#ifdef SLEEP_TEST_TIMEOUT
static int sleep_ticks;
void wakeup_counter0_set(int ticks);
#endif
static void save_core_regs(void)
{
......@@ -105,31 +79,45 @@ static void save_core_regs(void)
sleep_uart0_linectl = au_readl(UART0_ADDR + UART_LCR);
sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK);
sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL);
au_sync();
#ifndef CONFIG_SOC_AU1200
/* Shutdown USB host/device. */
sleep_usbhost_enable = au_readl(USB_HOST_CONFIG);
sleep_usb[0] = au_readl(USB_HOST_CONFIG);
/* There appears to be some undocumented reset register.... */
au_writel(0, 0xb0100004); au_sync();
au_writel(0, USB_HOST_CONFIG); au_sync();
au_writel(0, 0xb0100004);
au_sync();
au_writel(0, USB_HOST_CONFIG);
au_sync();
sleep_usbdev_enable = au_readl(USBD_ENABLE);
au_writel(0, USBD_ENABLE); au_sync();
sleep_usb[1] = au_readl(USBD_ENABLE);
au_writel(0, USBD_ENABLE);
au_sync();
#else /* AU1200 */
/* enable access to OTG mmio so we can save OTG CAP/MUX.
* FIXME: write an OTG driver and move this stuff there!
*/
au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
au_sync();
sleep_usb[0] = au_readl(0xb4020020); /* OTG_CAP */
sleep_usb[1] = au_readl(0xb4020024); /* OTG_MUX */
#endif
/* Save interrupt controller state. */
save_au1xxx_intctl();
/* Clocks and PLLs. */
sleep_aux_pll_cntrl = au_readl(SYS_AUXPLL);
sleep_sys_clocks[0] = au_readl(SYS_FREQCTRL0);
sleep_sys_clocks[1] = au_readl(SYS_FREQCTRL1);
sleep_sys_clocks[2] = au_readl(SYS_CLKSRC);
sleep_sys_clocks[3] = au_readl(SYS_CPUPLL);
sleep_sys_clocks[4] = au_readl(SYS_AUXPLL);
/*
* We don't really need to do this one, but unless we
* write it again it won't have a valid value if we
* happen to read it.
*/
sleep_cpu_pll_cntrl = au_readl(SYS_CPUPLL);
sleep_pin_function = au_readl(SYS_PINFUNC);
/* pin mux config */
sleep_sys_pinfunc = au_readl(SYS_PINFUNC);
/* Save the static memory controller configuration. */
sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0);
......@@ -144,16 +132,45 @@ static void save_core_regs(void)
sleep_static_memctlr[3][0] = au_readl(MEM_STCFG3);
sleep_static_memctlr[3][1] = au_readl(MEM_STTIME3);
sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3);
#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
au1xxx_dbdma_suspend();
#endif
}
static void restore_core_regs(void)
{
extern void restore_au1xxx_intctl(void);
extern void wakeup_counter0_adjust(void);
/* restore clock configuration. Writing CPUPLL last will
* stall a bit and stabilize other clocks (unless this is
* one of those Au1000 with a write-only PLL, where we dont
* have a valid value)
*/
au_writel(sleep_sys_clocks[0], SYS_FREQCTRL0);
au_writel(sleep_sys_clocks[1], SYS_FREQCTRL1);
au_writel(sleep_sys_clocks[2], SYS_CLKSRC);
au_writel(sleep_sys_clocks[4], SYS_AUXPLL);
if (!au1xxx_cpu_has_pll_wo())
au_writel(sleep_sys_clocks[3], SYS_CPUPLL);
au_sync();
au_writel(sleep_aux_pll_cntrl, SYS_AUXPLL); au_sync();
au_writel(sleep_cpu_pll_cntrl, SYS_CPUPLL); au_sync();
au_writel(sleep_pin_function, SYS_PINFUNC); au_sync();
au_writel(sleep_sys_pinfunc, SYS_PINFUNC);
au_sync();
#ifndef CONFIG_SOC_AU1200
au_writel(sleep_usb[0], USB_HOST_CONFIG);
au_writel(sleep_usb[1], USBD_ENABLE);
au_sync();
#else
/* enable accces to OTG memory */
au_writel(au_readl(USB_MSR_BASE + 4) | (1 << 6), USB_MSR_BASE + 4);
au_sync();
/* restore OTG caps and port mux. */
au_writel(sleep_usb[0], 0xb4020020 + 0); /* OTG_CAP */
au_sync();
au_writel(sleep_usb[1], 0xb4020020 + 4); /* OTG_MUX */
au_sync();
#endif
/* Restore the static memory controller configuration. */
au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
......@@ -184,282 +201,17 @@ static void restore_core_regs(void)
}
restore_au1xxx_intctl();
wakeup_counter0_adjust();
}
unsigned long suspend_mode;
void wakeup_from_suspend(void)
{
suspend_mode = 0;
#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
au1xxx_dbdma_resume();
#endif
}
int au_sleep(void)
void au_sleep(void)
{
unsigned long wakeup, flags;
extern void save_and_sleep(void);
spin_lock_irqsave(&pm_lock, flags);
save_core_regs();
flush_cache_all();
/**
** The code below is all system dependent and we should probably
** have a function call out of here to set this up. You need
** to configure the GPIO or timer interrupts that will bring
** you out of sleep.
** For testing, the TOY counter wakeup is useful.
**/
#if 0
au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD);
/* GPIO 6 can cause a wake up event */
wakeup = au_readl(SYS_WAKEMSK);
wakeup &= ~(1 << 8); /* turn off match20 wakeup */
wakeup |= 1 << 6; /* turn on GPIO 6 wakeup */
#else
/* For testing, allow match20 to wake us up. */
#ifdef SLEEP_TEST_TIMEOUT
wakeup_counter0_set(sleep_ticks);
#endif
wakeup = 1 << 8; /* turn on match20 wakeup */
wakeup = 0;
#endif
au_writel(1, SYS_WAKESRC); /* clear cause */
au_sync();
au_writel(wakeup, SYS_WAKEMSK);
au_sync();
save_and_sleep();
/*
* After a wakeup, the cpu vectors back to 0x1fc00000, so
* it's up to the boot code to get us back here.
*/
au1xxx_save_and_sleep();
restore_core_regs();
spin_unlock_irqrestore(&pm_lock, flags);
return 0;
}
static int pm_do_sleep(ctl_table *ctl, int write, struct file *file,
void __user *buffer, size_t *len, loff_t *ppos)
{
#ifdef SLEEP_TEST_TIMEOUT
#define TMPBUFLEN2 16
char buf[TMPBUFLEN2], *p;
#endif
if (!write)
*len = 0;
else {
#ifdef SLEEP_TEST_TIMEOUT
if (*len > TMPBUFLEN2 - 1)
return -EFAULT;
if (copy_from_user(buf, buffer, *len))
return -EFAULT;
buf[*len] = 0;
p = buf;
sleep_ticks = simple_strtoul(p, &p, 0);
#endif
au_sleep();
}
return 0;
}
static int pm_do_freq(ctl_table *ctl, int write, struct file *file,
void __user *buffer, size_t *len, loff_t *ppos)
{
int retval = 0, i;
unsigned long val, pll;
#define TMPBUFLEN 64
#define MAX_CPU_FREQ 396
char buf[TMPBUFLEN], *p;
unsigned long flags, intc0_mask, intc1_mask;
unsigned long old_baud_base, old_cpu_freq, old_clk, old_refresh;
unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh;
unsigned long baud_rate;
spin_lock_irqsave(&pm_lock, flags);
if (!write)
*len = 0;
else {
/* Parse the new frequency */
if (*len > TMPBUFLEN - 1) {
spin_unlock_irqrestore(&pm_lock, flags);
return -EFAULT;
}
if (copy_from_user(buf, buffer, *len)) {
spin_unlock_irqrestore(&pm_lock, flags);
return -EFAULT;
}
buf[*len] = 0;
p = buf;
val = simple_strtoul(p, &p, 0);
if (val > MAX_CPU_FREQ) {
spin_unlock_irqrestore(&pm_lock, flags);
return -EFAULT;
}
pll = val / 12;
if ((pll > 33) || (pll < 7)) { /* 396 MHz max, 84 MHz min */
/* Revisit this for higher speed CPUs */
spin_unlock_irqrestore(&pm_lock, flags);
return -EFAULT;
}
old_baud_base = get_au1x00_uart_baud_base();
old_cpu_freq = get_au1x00_speed();
new_cpu_freq = pll * 12 * 1000000;
new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)
& 0x03) + 2) * 16));
set_au1x00_speed(new_cpu_freq);
set_au1x00_uart_baud_base(new_baud_base);
old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff;
new_refresh = ((old_refresh * new_cpu_freq) / old_cpu_freq) |
(au_readl(MEM_SDREFCFG) & ~0x1ffffff);
au_writel(pll, SYS_CPUPLL);
au_sync_delay(1);
au_writel(new_refresh, MEM_SDREFCFG);
au_sync_delay(1);
for (i = 0; i < 4; i++)
if (au_readl(UART_BASE + UART_MOD_CNTRL +
i * 0x00100000) == 3) {
old_clk = au_readl(UART_BASE + UART_CLK +
i * 0x00100000);
baud_rate = old_baud_base / old_clk;
/*
* We won't get an exact baud rate and the error
* could be significant enough that our new
* calculation will result in a clock that will
* give us a baud rate that's too far off from
* what we really want.
*/
if (baud_rate > 100000)
baud_rate = 115200;
else if (baud_rate > 50000)
baud_rate = 57600;
else if (baud_rate > 30000)
baud_rate = 38400;
else if (baud_rate > 17000)
baud_rate = 19200;
else
baud_rate = 9600;
new_clk = new_baud_base / baud_rate;
au_writel(new_clk, UART_BASE + UART_CLK +
i * 0x00100000);
au_sync_delay(10);
}
}
/*
* We don't want _any_ interrupts other than match20. Otherwise our
* au1000_calibrate_delay() calculation will be off, potentially a lot.
*/
intc0_mask = save_local_and_disable(0);
intc1_mask = save_local_and_disable(1);
local_enable_irq(AU1000_TOY_MATCH2_INT);
spin_unlock_irqrestore(&pm_lock, flags);
au1000_calibrate_delay();
restore_local_and_enable(0, intc0_mask);
restore_local_and_enable(1, intc1_mask);
return retval;
}
static struct ctl_table pm_table[] = {
{
.ctl_name = CTL_UNNUMBERED,
.procname = "sleep",
.data = NULL,
.maxlen = 0,
.mode = 0600,
.proc_handler = &pm_do_sleep
},
{
.ctl_name = CTL_UNNUMBERED,
.procname = "freq",
.data = NULL,
.maxlen = 0,
.mode = 0600,
.proc_handler = &pm_do_freq
},
{}
};
static struct ctl_table pm_dir_table[] = {
{
.ctl_name = CTL_UNNUMBERED,
.procname = "pm",
.mode = 0555,
.child = pm_table
},
{}
};
/*
* Initialize power interface
*/
static int __init pm_init(void)
{
register_sysctl_table(pm_dir_table);
return 0;
}
__initcall(pm_init);
/*
* This is right out of init/main.c
*/
/*
* This is the number of bits of precision for the loops_per_jiffy.
* Each bit takes on average 1.5/HZ seconds. This (like the original)
* is a little better than 1%.
*/
#define LPS_PREC 8
static void au1000_calibrate_delay(void)
{
unsigned long ticks, loopbit;
int lps_precision = LPS_PREC;
loops_per_jiffy = 1 << 12;
while (loops_per_jiffy <<= 1) {
/* Wait for "start of" clock tick */
ticks = jiffies;
while (ticks == jiffies)
/* nothing */ ;
/* Go ... */
ticks = jiffies;
__delay(loops_per_jiffy);
ticks = jiffies - ticks;
if (ticks)
break;
}
/*
* Do a binary approximation to get loops_per_jiffy set to be equal
* one clock (up to lps_precision bits)
*/
loops_per_jiffy >>= 1;
loopbit = loops_per_jiffy;
while (lps_precision-- && (loopbit >>= 1)) {
loops_per_jiffy |= loopbit;
ticks = jiffies;
while (ticks == jiffies);
ticks = jiffies;
__delay(loops_per_jiffy);
if (jiffies != ticks) /* longer than 1 tick */
loops_per_jiffy &= ~loopbit;
}
}
#endif /* CONFIG_PM */
arch/mips/alchemy/common/reset.c
浏览文件 @ 9219a3b9
......@@ -31,8 +31,6 @@
#include <asm/mach-au1x00/au1000.h>
extern int au_sleep(void);
void au1000_restart(char *command)
{
/* Set all integrated peripherals to disabled states */
......
arch/mips/alchemy/common/setup.c
浏览文件 @ 9219a3b9
......@@ -35,7 +35,6 @@
#include <asm/time.h>
#include <au1000.h>
#include <prom.h>
extern void __init board_setup(void);
extern void au1000_restart(char *);
......@@ -45,80 +44,34 @@ extern void set_cpuspec(void);
void __init plat_mem_setup(void)
{
struct cpu_spec *sp;
char *argptr;
unsigned long prid, cpufreq, bclk;
unsigned long est_freq;
set_cpuspec();
sp = cur_cpu_spec[0];
/* determine core clock */
est_freq = au1xxx_calc_clock();
est_freq += 5000; /* round */
est_freq -= est_freq % 10000;
printk(KERN_INFO "(PRId %08x) @ %lu.%02lu MHz\n", read_c0_prid(),
est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
board_setup(); /* board specific setup */
prid = read_c0_prid();
if (sp->cpu_pll_wo)
#ifdef CONFIG_SOC_AU1000_FREQUENCY
cpufreq = CONFIG_SOC_AU1000_FREQUENCY / 1000000;
#else
cpufreq = 396;
#endif
else
cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12;
printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq);
_machine_restart = au1000_restart;
_machine_halt = au1000_halt;
pm_power_off = au1000_power_off;
if (sp->cpu_bclk) {
/* Enable BCLK switching */
bclk = au_readl(SYS_POWERCTRL);
au_writel(bclk | 0x60, SYS_POWERCTRL);
printk(KERN_INFO "BCLK switching enabled!\n");
}
board_setup(); /* board specific setup */
if (sp->cpu_od)
if (au1xxx_cpu_needs_config_od())
/* Various early Au1xx0 errata corrected by this */
set_c0_config(1 << 19); /* Set Config[OD] */
else
/* Clear to obtain best system bus performance */
clear_c0_config(1 << 19); /* Clear Config[OD] */
argptr = prom_getcmdline();
#ifdef CONFIG_SERIAL_8250_CONSOLE
argptr = strstr(argptr, "console=");
if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
#ifdef CONFIG_FB_AU1100
argptr = strstr(argptr, "video=");
if (argptr == NULL) {
argptr = prom_getcmdline();
/* default panel */
/*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
}
#endif
#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
/* au1000 does not support vra, au1500 and au1100 do */
strcat(argptr, " au1000_audio=vra");
argptr = prom_getcmdline();
#endif
_machine_restart = au1000_restart;
_machine_halt = au1000_halt;
pm_power_off = au1000_power_off;
/* IO/MEM resources. */
set_io_port_base(0);
ioport_resource.start = IOPORT_RESOURCE_START;
ioport_resource.end = IOPORT_RESOURCE_END;
iomem_resource.start = IOMEM_RESOURCE_START;
iomem_resource.end = IOMEM_RESOURCE_END;
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_E0S);
au_writel(SYS_CNTRL_E0 | SYS_CNTRL_EN0, SYS_COUNTER_CNTRL);
au_sync();
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S);
au_writel(0, SYS_TOYTRIM);
}
#if defined(CONFIG_64BIT_PHYS_ADDR)
......
arch/mips/alchemy/common/sleeper.S
浏览文件 @ 9219a3b9
......@@ -15,16 +15,17 @@
#include <asm/regdef.h>
#include <asm/stackframe.h>
.extern __flush_cache_all
.text
.set macro
.set noat
.set noreorder
.set noat
.align 5
/* Save all of the processor general registers and go to sleep.
* A wakeup condition will get us back here to restore the registers.
*/
LEAF(save_and_sleep)
LEAF(au1xxx_save_and_sleep)
subu sp, PT_SIZE
sw $1, PT_R1(sp)
sw $2, PT_R2(sp)
......@@ -33,14 +34,6 @@ LEAF(save_and_sleep)
sw $5, PT_R5(sp)
sw $6, PT_R6(sp)
sw $7, PT_R7(sp)
sw $8, PT_R8(sp)
sw $9, PT_R9(sp)
sw $10, PT_R10(sp)
sw $11, PT_R11(sp)
sw $12, PT_R12(sp)
sw $13, PT_R13(sp)
sw $14, PT_R14(sp)
sw $15, PT_R15(sp)
sw $16, PT_R16(sp)
sw $17, PT_R17(sp)
sw $18, PT_R18(sp)
......@@ -49,12 +42,9 @@ LEAF(save_and_sleep)
sw $21, PT_R21(sp)
sw $22, PT_R22(sp)
sw $23, PT_R23(sp)
sw $24, PT_R24(sp)
sw $25, PT_R25(sp)
sw $26, PT_R26(sp)
sw $27, PT_R27(sp)
sw $28, PT_R28(sp)
sw $29, PT_R29(sp)
sw $30, PT_R30(sp)
sw $31, PT_R31(sp)
mfc0 k0, CP0_STATUS
......@@ -66,20 +56,26 @@ LEAF(save_and_sleep)
mfc0 k0, CP0_CONFIG
sw k0, 0x14(sp)
/* flush caches to make sure context is in memory */
la t1, __flush_cache_all
lw t0, 0(t1)
jalr t0
nop
/* Now set up the scratch registers so the boot rom will
* return to this point upon wakeup.
* sys_scratch0 : SP
* sys_scratch1 : RA
*/
la k0, 1f
lui k1, 0xb190
ori k1, 0x18
sw sp, 0(k1)
ori k1, 0x1c
sw k0, 0(k1)
lui t3, 0xb190 /* sys_xxx */
sw sp, 0x0018(t3)
la k0, 3f /* resume path */
sw k0, 0x001c(t3)
/* Put SDRAM into self refresh. Preload instructions into cache,
* issue a precharge, then auto refresh, then sleep commands to it.
*/
la t0, sdsleep
/* Put SDRAM into self refresh: Preload instructions into cache,
* issue a precharge, auto/self refresh, then sleep commands to it.
*/
la t0, 1f
.set mips3
cache 0x14, 0(t0)
cache 0x14, 32(t0)
......@@ -87,24 +83,57 @@ LEAF(save_and_sleep)
cache 0x14, 96(t0)
.set mips0
sdsleep:
lui k0, 0xb400
sw zero, 0x001c(k0) /* Precharge */
sw zero, 0x0020(k0) /* Auto refresh */
sw zero, 0x0030(k0) /* SDRAM sleep */
1: lui a0, 0xb400 /* mem_xxx */
#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100) || \
defined(CONFIG_SOC_AU1500)
sw zero, 0x001c(a0) /* Precharge */
sync
sw zero, 0x0020(a0) /* Auto Refresh */
sync
sw zero, 0x0030(a0) /* Sleep */
sync
#endif
#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
sw zero, 0x08c0(a0) /* Precharge */
sync
sw zero, 0x08d0(a0) /* Self Refresh */
sync
/* wait for sdram to enter self-refresh mode */
lui t0, 0x0100
2: lw t1, 0x0850(a0) /* mem_sdstat */
and t2, t1, t0
beq t2, zero, 2b
nop
lui k1, 0xb190
sw zero, 0x0078(k1) /* get ready to sleep */
/* disable SDRAM clocks */
lui t0, 0xcfff
ori t0, t0, 0xffff
lw t1, 0x0840(a0) /* mem_sdconfiga */
and t1, t0, t1 /* clear CE[1:0] */
sw t1, 0x0840(a0) /* mem_sdconfiga */
sync
sw zero, 0x007c(k1) /* Put processor to sleep */
#endif
/* put power supply and processor to sleep */
sw zero, 0x0078(t3) /* sys_slppwr */
sync
sw zero, 0x007c(t3) /* sys_sleep */
sync
nop
nop
nop
nop
nop
nop
nop
nop
/* This is where we return upon wakeup.
* Reload all of the registers and return.
*/
1: nop
lw k0, 0x20(sp)
3: lw k0, 0x20(sp)
mtc0 k0, CP0_STATUS
lw k0, 0x1c(sp)
mtc0 k0, CP0_CONTEXT
......@@ -113,10 +142,11 @@ sdsleep:
lw k0, 0x14(sp)
mtc0 k0, CP0_CONFIG
/* We need to catch the ealry Alchemy SOCs with
/* We need to catch the early Alchemy SOCs with
* the write-only Config[OD] bit and set it back to one...
*/
jal au1x00_fixup_config_od
nop
lw $1, PT_R1(sp)
lw $2, PT_R2(sp)
lw $3, PT_R3(sp)
......@@ -124,14 +154,6 @@ sdsleep:
lw $5, PT_R5(sp)
lw $6, PT_R6(sp)
lw $7, PT_R7(sp)
lw $8, PT_R8(sp)
lw $9, PT_R9(sp)
lw $10, PT_R10(sp)
lw $11, PT_R11(sp)
lw $12, PT_R12(sp)
lw $13, PT_R13(sp)
lw $14, PT_R14(sp)
lw $15, PT_R15(sp)
lw $16, PT_R16(sp)
lw $17, PT_R17(sp)
lw $18, PT_R18(sp)
......@@ -140,15 +162,11 @@ sdsleep:
lw $21, PT_R21(sp)
lw $22, PT_R22(sp)
lw $23, PT_R23(sp)
lw $24, PT_R24(sp)
lw $25, PT_R25(sp)
lw $26, PT_R26(sp)
lw $27, PT_R27(sp)
lw $28, PT_R28(sp)
lw $29, PT_R29(sp)
lw $30, PT_R30(sp)
lw $31, PT_R31(sp)
addiu sp, PT_SIZE
jr ra
END(save_and_sleep)
addiu sp, PT_SIZE
END(au1xxx_save_and_sleep)
arch/mips/alchemy/common/time.c
浏览文件 @ 9219a3b9
/*
* Copyright (C) 2008 Manuel Lauss <mano@roarinelk.homelinux.net>
*
* Previous incarnations were:
* Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com>
* Copied and modified Carsten Langgaard's time.c
*
......@@ -23,244 +25,141 @@
*
* ########################################################################
*
* Setting up the clock on the MIPS boards.
*
* We provide the clock interrupt processing and the timer offset compute
* functions. If CONFIG_PM is selected, we also ensure the 32KHz timer is
* available. -- Dan
* Clocksource/event using the 32.768kHz-clocked Counter1 ('RTC' in the
* databooks). Firmware/Board init code must enable the counters in the
* counter control register, otherwise the CP0 counter clocksource/event
* will be installed instead (and use of 'wait' instruction is prohibited).
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/clockchips.h>
#include <linux/clocksource.h>
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <asm/mipsregs.h>
#include <asm/time.h>
#include <asm/mach-au1x00/au1000.h>
static int no_au1xxx_32khz;
extern int allow_au1k_wait; /* default off for CP0 Counter */
#ifdef CONFIG_PM
#if HZ < 100 || HZ > 1000
#error "unsupported HZ value! Must be in [100,1000]"
#endif
#define MATCH20_INC (328 * 100 / HZ) /* magic number 328 is for HZ=100... */
static unsigned long last_pc0, last_match20;
#endif
/* 32kHz clock enabled and detected */
#define CNTR_OK (SYS_CNTRL_E0 | SYS_CNTRL_32S)
static DEFINE_SPINLOCK(time_lock);
unsigned long wtimer;
extern int allow_au1k_wait; /* default off for CP0 Counter */
#ifdef CONFIG_PM
static irqreturn_t counter0_irq(int irq, void *dev_id)
static cycle_t au1x_counter1_read(void)
{
unsigned long pc0;
int time_elapsed;
static int jiffie_drift;
if (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20) {
/* should never happen! */
printk(KERN_WARNING "counter 0 w status error\n");
return IRQ_NONE;
}
pc0 = au_readl(SYS_TOYREAD);
if (pc0 < last_match20)
/* counter overflowed */
time_elapsed = (0xffffffff - last_match20) + pc0;
else
time_elapsed = pc0 - last_match20;
while (time_elapsed > 0) {
do_timer(1);
#ifndef CONFIG_SMP
update_process_times(user_mode(get_irq_regs()));
#endif
time_elapsed -= MATCH20_INC;
last_match20 += MATCH20_INC;
jiffie_drift++;
}
last_pc0 = pc0;
au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
au_sync();
/*
* Our counter ticks at 10.009765625 ms/tick, we we're running
* almost 10 uS too slow per tick.
*/
if (jiffie_drift >= 999) {
jiffie_drift -= 999;
do_timer(1); /* increment jiffies by one */
#ifndef CONFIG_SMP
update_process_times(user_mode(get_irq_regs()));
#endif
}
return IRQ_HANDLED;
return au_readl(SYS_RTCREAD);
}
struct irqaction counter0_action = {
.handler = counter0_irq,
.flags = IRQF_DISABLED,
.name = "alchemy-toy",
.dev_id = NULL,
static struct clocksource au1x_counter1_clocksource = {
.name = "alchemy-counter1",
.read = au1x_counter1_read,
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
.rating = 100,
};
/* When we wakeup from sleep, we have to "catch up" on all of the
* timer ticks we have missed.
*/
void wakeup_counter0_adjust(void)
static int au1x_rtcmatch2_set_next_event(unsigned long delta,
struct clock_event_device *cd)
{
unsigned long pc0;
int time_elapsed;
pc0 = au_readl(SYS_TOYREAD);
if (pc0 < last_match20)
/* counter overflowed */
time_elapsed = (0xffffffff - last_match20) + pc0;
else
time_elapsed = pc0 - last_match20;
while (time_elapsed > 0) {
time_elapsed -= MATCH20_INC;
last_match20 += MATCH20_INC;
}
last_pc0 = pc0;
au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
delta += au_readl(SYS_RTCREAD);
/* wait for register access */
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M21)
;
au_writel(delta, SYS_RTCMATCH2);
au_sync();
return 0;
}
/* This is just for debugging to set the timer for a sleep delay. */
void wakeup_counter0_set(int ticks)
static void au1x_rtcmatch2_set_mode(enum clock_event_mode mode,
struct clock_event_device *cd)
{
unsigned long pc0;
pc0 = au_readl(SYS_TOYREAD);
last_pc0 = pc0;
au_writel(last_match20 + (MATCH20_INC * ticks), SYS_TOYMATCH2);
au_sync();
}
#endif
/*
* I haven't found anyone that doesn't use a 12 MHz source clock,
* but just in case.....
*/
#define AU1000_SRC_CLK 12000000
/*
* We read the real processor speed from the PLL. This is important
* because it is more accurate than computing it from the 32 KHz
* counter, if it exists. If we don't have an accurate processor
* speed, all of the peripherals that derive their clocks based on
* this advertised speed will introduce error and sometimes not work
* properly. This function is futher convoluted to still allow configurations
* to do that in case they have really, really old silicon with a
* write-only PLL register, that we need the 32 KHz when power management
* "wait" is enabled, and we need to detect if the 32 KHz isn't present
* but requested......got it? :-) -- Dan
*/
unsigned long calc_clock(void)
static irqreturn_t au1x_rtcmatch2_irq(int irq, void *dev_id)
{
unsigned long cpu_speed;
unsigned long flags;
unsigned long counter;
spin_lock_irqsave(&time_lock, flags);
/* Power management cares if we don't have a 32 KHz counter. */
no_au1xxx_32khz = 0;
counter = au_readl(SYS_COUNTER_CNTRL);
if (counter & SYS_CNTRL_E0) {
int trim_divide = 16;
au_writel(counter | SYS_CNTRL_EN1, SYS_COUNTER_CNTRL);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S);
/* RTC now ticks at 32.768/16 kHz */
au_writel(trim_divide - 1, SYS_RTCTRIM);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S);
struct clock_event_device *cd = dev_id;
cd->event_handler(cd);
return IRQ_HANDLED;
}
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
au_writel(0, SYS_TOYWRITE);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
} else
no_au1xxx_32khz = 1;
static struct clock_event_device au1x_rtcmatch2_clockdev = {
.name = "rtcmatch2",
.features = CLOCK_EVT_FEAT_ONESHOT,
.rating = 100,
.irq = AU1000_RTC_MATCH2_INT,
.set_next_event = au1x_rtcmatch2_set_next_event,
.set_mode = au1x_rtcmatch2_set_mode,
.cpumask = CPU_MASK_ALL,
};
/*
* On early Au1000, sys_cpupll was write-only. Since these
* silicon versions of Au1000 are not sold by AMD, we don't bend
* over backwards trying to determine the frequency.
*/
if (cur_cpu_spec[0]->cpu_pll_wo)
#ifdef CONFIG_SOC_AU1000_FREQUENCY
cpu_speed = CONFIG_SOC_AU1000_FREQUENCY;
#else
cpu_speed = 396000000;
#endif
else
cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
/* On Alchemy CPU:counter ratio is 1:1 */
mips_hpt_frequency = cpu_speed;
/* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */
set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
& 0x03) + 2) * 16));
spin_unlock_irqrestore(&time_lock, flags);
return cpu_speed;
}
static struct irqaction au1x_rtcmatch2_irqaction = {
.handler = au1x_rtcmatch2_irq,
.flags = IRQF_DISABLED | IRQF_TIMER,
.name = "timer",
.dev_id = &au1x_rtcmatch2_clockdev,
};
void __init plat_time_init(void)
{
unsigned int est_freq = calc_clock();
est_freq += 5000; /* round */
est_freq -= est_freq%10000;
printk(KERN_INFO "CPU frequency %u.%02u MHz\n",
est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
set_au1x00_speed(est_freq);
set_au1x00_lcd_clock(); /* program the LCD clock */
struct clock_event_device *cd = &au1x_rtcmatch2_clockdev;
unsigned long t;
/* Check if firmware (YAMON, ...) has enabled 32kHz and clock
* has been detected. If so install the rtcmatch2 clocksource,
* otherwise don't bother. Note that both bits being set is by
* no means a definite guarantee that the counters actually work
* (the 32S bit seems to be stuck set to 1 once a single clock-
* edge is detected, hence the timeouts).
*/
if (CNTR_OK != (au_readl(SYS_COUNTER_CNTRL) & CNTR_OK))
goto cntr_err;
#ifdef CONFIG_PM
/*
* setup counter 0, since it keeps ticking after a
* 'wait' instruction has been executed. The CP0 timer and
* counter 1 do NOT continue running after 'wait'
*
* It's too early to call request_irq() here, so we handle
* counter 0 interrupt as a special irq and it doesn't show
* up under /proc/interrupts.
*
* Check to ensure we really have a 32 KHz oscillator before
* we do this.
* setup counter 1 (RTC) to tick at full speed
*/
if (no_au1xxx_32khz)
printk(KERN_WARNING "WARNING: no 32KHz clock found.\n");
else {
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
au_writel(0, SYS_TOYWRITE);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
au_writel(au_readl(SYS_WAKEMSK) | (1 << 8), SYS_WAKEMSK);
au_writel(~0, SYS_WAKESRC);
au_sync();
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
t = 0xffffff;
while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && t--)
asm volatile ("nop");
if (!t)
goto cntr_err;
/* Setup match20 to interrupt once every HZ */
last_pc0 = last_match20 = au_readl(SYS_TOYREAD);
au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
au_sync();
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
setup_irq(AU1000_TOY_MATCH2_INT, &counter0_action);
au_writel(0, SYS_RTCTRIM); /* 32.768 kHz */
au_sync();
/* We can use the real 'wait' instruction. */
allow_au1k_wait = 1;
}
t = 0xffffff;
while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--)
asm volatile ("nop");
if (!t)
goto cntr_err;
au_writel(0, SYS_RTCWRITE);
au_sync();
#endif
t = 0xffffff;
while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--)
asm volatile ("nop");
if (!t)
goto cntr_err;
/* register counter1 clocksource and event device */
clocksource_set_clock(&au1x_counter1_clocksource, 32768);
clocksource_register(&au1x_counter1_clocksource);
cd->shift = 32;
cd->mult = div_sc(32768, NSEC_PER_SEC, cd->shift);
cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd);
cd->min_delta_ns = clockevent_delta2ns(8, cd); /* ~0.25ms */
clockevents_register_device(cd);
setup_irq(AU1000_RTC_MATCH2_INT, &au1x_rtcmatch2_irqaction);
printk(KERN_INFO "Alchemy clocksource installed\n");
/* can now use 'wait' */
allow_au1k_wait = 1;
return;
cntr_err:
/* counters unusable, use C0 counter */
r4k_clockevent_init();
init_r4k_clocksource();
allow_au1k_wait = 0;
}
arch/mips/alchemy/db1x00/init.c 已删除 100644 → 0
浏览文件 @ 23ead729
/*
* BRIEF MODULE DESCRIPTION
* PB1000 board setup
*
* Copyright 2001, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <asm/bootinfo.h>
#include <prom.h>
const char *get_system_type(void)
{
#ifdef CONFIG_MIPS_BOSPORUS
return "Alchemy Bosporus Gateway Reference";
#else
return "Alchemy Db1x00";
#endif
}
void __init prom_init(void)
{
unsigned char *memsize_str;
unsigned long memsize;
prom_argc = fw_arg0;
prom_argv = (char **)fw_arg1;
prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
if (!memsize_str)
memsize = 0x04000000;
else
strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
arch/mips/alchemy/devboards/Makefile 0 → 100644
浏览文件 @ 9219a3b9
#
# Alchemy Develboards
#
obj-y += prom.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_MIPS_PB1000) += pb1000/
obj-$(CONFIG_MIPS_PB1100) += pb1100/
obj-$(CONFIG_MIPS_PB1200) += pb1200/
obj-$(CONFIG_MIPS_PB1500) += pb1500/
obj-$(CONFIG_MIPS_PB1550) += pb1550/
obj-$(CONFIG_MIPS_DB1000) += db1x00/
obj-$(CONFIG_MIPS_DB1100) += db1x00/
obj-$(CONFIG_MIPS_DB1200) += pb1200/
obj-$(CONFIG_MIPS_DB1500) += db1x00/
obj-$(CONFIG_MIPS_DB1550) += db1x00/
obj-$(CONFIG_MIPS_BOSPORUS) += db1x00/
obj-$(CONFIG_MIPS_MIRAGE) += db1x00/
arch/mips/alchemy/db1x00/Makefile → arch/mips/alchemy/devboards/db1x00/Makefile
浏览文件 @ 9219a3b9
......@@ -5,4 +5,4 @@
# Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
#
lib-y := init.o board_setup.o irqmap.o
obj-y := board_setup.o irqmap.o
arch/mips/alchemy/db1x00/board_setup.c → arch/mips/alchemy/devboards/db1x00/board_setup.c
浏览文件 @ 9219a3b9
......@@ -32,8 +32,20 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-db1x00/db1x00.h>
#include <prom.h>
static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
const char *get_system_type(void)
{
#ifdef CONFIG_MIPS_BOSPORUS
return "Alchemy Bosporus Gateway Reference";
#else
return "Alchemy Db1x00";
#endif
}
void board_reset(void)
{
/* Hit BCSR.SW_RESET[RESET] */
......@@ -43,6 +55,31 @@ void board_reset(void)
void __init board_setup(void)
{
u32 pin_func = 0;
char *argptr;
argptr = prom_getcmdline();
#ifdef CONFIG_SERIAL_8250_CONSOLE
argptr = strstr(argptr, "console=");
if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
#ifdef CONFIG_FB_AU1100
argptr = strstr(argptr, "video=");
if (argptr == NULL) {
argptr = prom_getcmdline();
/* default panel */
/*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
}
#endif
#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
/* au1000 does not support vra, au1500 and au1100 do */
strcat(argptr, " au1000_audio=vra");
argptr = prom_getcmdline();
#endif
/* Not valid for Au1550 */
#if defined(CONFIG_IRDA) && \
......
arch/mips/alchemy/db1x00/irqmap.c → arch/mips/alchemy/devboards/db1x00/irqmap.c
浏览文件 @ 9219a3b9
......@@ -27,6 +27,7 @@
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
......@@ -66,21 +67,24 @@ struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
#ifndef CONFIG_MIPS_MIRAGE
#ifdef CONFIG_MIPS_DB1550
{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */
{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */
{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
#else
{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 Fully_Interted# */
{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 STSCHG# */
{ AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 0 IRQ# */
{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 Fully_Interted# */
{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 STSCHG# */
{ AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */
{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 Fully_Interted# */
{ AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 STSCHG# */
{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card 1 IRQ# */
{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 Fully_Interted# */
{ AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 STSCHG# */
{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */
#endif
#else
{ AU1000_GPIO_7, INTC_INT_RISE_EDGE, 0 }, /* touchscreen pen down */
{ AU1000_GPIO_7, IRQF_TRIGGER_RISING, 0 }, /* touchscreen pen down */
#endif
};
int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
arch/mips/alchemy/pb1000/Makefile → arch/mips/alchemy/devboards/pb1000/Makefile
浏览文件 @ 9219a3b9
......@@ -5,4 +5,4 @@
# Makefile for the Alchemy Semiconductor Pb1000 board.
#
lib-y := init.o board_setup.o irqmap.o
obj-y := board_setup.o
arch/mips/alchemy/pb1000/board_setup.c → arch/mips/alchemy/devboards/pb1000/board_setup.c
浏览文件 @ 9219a3b9
......@@ -23,22 +23,48 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1000.h>
#include <prom.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_15, IRQF_TRIGGER_LOW, 0 },
};
const char *get_system_type(void)
{
return "Alchemy Pb1000";
}
void board_reset(void)
{
}
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
void __init board_setup(void)
{
u32 pin_func, static_cfg0;
u32 sys_freqctrl, sys_clksrc;
u32 prid = read_c0_prid();
#ifdef CONFIG_SERIAL_8250_CONSOLE
char *argptr = prom_getcmdline();
argptr = strstr(argptr, "console=");
if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PINSTATERD);
......
arch/mips/alchemy/pb1100/Makefile → arch/mips/alchemy/devboards/pb1100/Makefile
浏览文件 @ 9219a3b9
......@@ -5,4 +5,4 @@
# Makefile for the Alchemy Semiconductor Pb1100 board.
#
lib-y := init.o board_setup.o irqmap.o
obj-y := board_setup.o
arch/mips/alchemy/pb1100/board_setup.c → arch/mips/alchemy/devboards/pb1100/board_setup.c
浏览文件 @ 9219a3b9
......@@ -25,19 +25,66 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1100.h>
#include <prom.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_9, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card Fully_Inserted# */
{ AU1000_GPIO_10, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card STSCHG# */
{ AU1000_GPIO_11, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card IRQ# */
{ AU1000_GPIO_13, IRQF_TRIGGER_LOW, 0 }, /* DC_IRQ# */
};
const char *get_system_type(void)
{
return "Alchemy Pb1100";
}
void board_reset(void)
{
/* Hit BCSR.RST_VDDI[SOFT_RESET] */
au_writel(0x00000000, PB1100_RST_VDDI);
}
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
void __init board_setup(void)
{
volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
char *argptr;
argptr = prom_getcmdline();
#ifdef CONFIG_SERIAL_8250_CONSOLE
argptr = strstr(argptr, "console=");
if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
#ifdef CONFIG_FB_AU1100
argptr = strstr(argptr, "video=");
if (argptr == NULL) {
argptr = prom_getcmdline();
/* default panel */
/*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
}
#endif
#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
/* au1000 does not support vra, au1500 and au1100 do */
strcat(argptr, " au1000_audio=vra");
argptr = prom_getcmdline();
#endif
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
......
arch/mips/alchemy/pb1200/Makefile → arch/mips/alchemy/devboards/pb1200/Makefile
浏览文件 @ 9219a3b9
......@@ -2,7 +2,6 @@
# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards.
#
lib-y := init.o board_setup.o irqmap.o
obj-y += platform.o
obj-y := board_setup.o irqmap.o platform.o
EXTRA_CFLAGS += -Werror
arch/mips/alchemy/pb1200/board_setup.c → arch/mips/alchemy/devboards/pb1200/board_setup.c
浏览文件 @ 9219a3b9
......@@ -30,8 +30,11 @@
#include <prom.h>
#include <au1xxx.h>
extern void _board_init_irq(void);
extern void (*board_init_irq)(void);
const char *get_system_type(void)
{
return "Alchemy Pb1200";
}
void board_reset(void)
{
......@@ -41,7 +44,19 @@ void board_reset(void)
void __init board_setup(void)
{
char *argptr = NULL;
char *argptr;
argptr = prom_getcmdline();
#ifdef CONFIG_SERIAL_8250_CONSOLE
argptr = strstr(argptr, "console=");
if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
#ifdef CONFIG_FB_AU1200
strcat(argptr, " video=au1200fb:panel:bs");
#endif
#if 0
{
......@@ -99,16 +114,6 @@ void __init board_setup(void)
}
#endif
#ifdef CONFIG_FB_AU1200
argptr = prom_getcmdline();
#ifdef CONFIG_MIPS_PB1200
strcat(argptr, " video=au1200fb:panel:bs");
#endif
#ifdef CONFIG_MIPS_DB1200
strcat(argptr, " video=au1200fb:panel:bs");
#endif
#endif
/*
* The Pb1200 development board uses external MUX for PSC0 to
* support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
......@@ -124,9 +129,6 @@ void __init board_setup(void)
#ifdef CONFIG_MIPS_DB1200
printk(KERN_INFO "AMD Alchemy Db1200 Board\n");
#endif
/* Setup Pb1200 External Interrupt Controller */
board_init_irq = _board_init_irq;
}
int board_au1200fb_panel(void)
......
arch/mips/alchemy/pb1200/irqmap.c → arch/mips/alchemy/devboards/pb1200/irqmap.c
浏览文件 @ 9219a3b9
......@@ -40,91 +40,65 @@
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
/* This is external interrupt cascade */
{ AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_7, IRQF_TRIGGER_LOW, 0 },
};
int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
/*
* Support for External interrupts on the Pb1200 Development platform.
*/
static volatile int pb1200_cascade_en;
irqreturn_t pb1200_cascade_handler(int irq, void *dev_id)
static void pb1200_cascade_handler(unsigned int irq, struct irq_desc *d)
{
unsigned short bisr = bcsr->int_status;
int extirq_nr = 0;
/* Clear all the edge interrupts. This has no effect on level. */
bcsr->int_status = bisr;
for ( ; bisr; bisr &= bisr - 1) {
extirq_nr = PB1200_INT_BEGIN + __ffs(bisr);
/* Ack and dispatch IRQ */
do_IRQ(extirq_nr);
}
return IRQ_RETVAL(1);
}
inline void pb1200_enable_irq(unsigned int irq_nr)
{
bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
for ( ; bisr; bisr &= bisr - 1)
generic_handle_irq(PB1200_INT_BEGIN + __ffs(bisr));
}
inline void pb1200_disable_irq(unsigned int irq_nr)
/* NOTE: both the enable and mask bits must be cleared, otherwise the
* CPLD generates tons of spurious interrupts (at least on the DB1200).
*/
static void pb1200_mask_irq(unsigned int irq_nr)
{
bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
au_sync();
}
static unsigned int pb1200_setup_cascade(void)
{
return request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
0, "Pb1200 Cascade", &pb1200_cascade_handler);
}
static unsigned int pb1200_startup_irq(unsigned int irq)
static void pb1200_maskack_irq(unsigned int irq_nr)
{
if (++pb1200_cascade_en == 1) {
int res;
res = pb1200_setup_cascade();
if (res)
return res;
}
pb1200_enable_irq(irq);
return 0;
bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
bcsr->int_status = 1 << (irq_nr - PB1200_INT_BEGIN); /* ack */
au_sync();
}
static void pb1200_shutdown_irq(unsigned int irq)
static void pb1200_unmask_irq(unsigned int irq_nr)
{
pb1200_disable_irq(irq);
if (--pb1200_cascade_en == 0)
free_irq(AU1000_GPIO_7, &pb1200_cascade_handler);
bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
au_sync();
}
static struct irq_chip external_irq_type = {
static struct irq_chip pb1200_cpld_irq_type = {
#ifdef CONFIG_MIPS_PB1200
.name = "Pb1200 Ext",
#endif
#ifdef CONFIG_MIPS_DB1200
.name = "Db1200 Ext",
#endif
.startup = pb1200_startup_irq,
.shutdown = pb1200_shutdown_irq,
.ack = pb1200_disable_irq,
.mask = pb1200_disable_irq,
.mask_ack = pb1200_disable_irq,
.unmask = pb1200_enable_irq,
.mask = pb1200_mask_irq,
.mask_ack = pb1200_maskack_irq,
.unmask = pb1200_unmask_irq,
};
void _board_init_irq(void)
void __init board_init_irq(void)
{
unsigned int irq;
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
#ifdef CONFIG_MIPS_PB1200
/* We have a problem with CPLD rev 3. */
if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
......@@ -146,15 +120,15 @@ void _board_init_irq(void)
panic("Game over. Your score is 0.");
}
#endif
/* mask & disable & ack all */
bcsr->intclr_mask = 0xffff;
bcsr->intclr = 0xffff;
bcsr->int_status = 0xffff;
au_sync();
for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++) {
set_irq_chip_and_handler(irq, &external_irq_type,
handle_level_irq);
pb1200_disable_irq(irq);
}
for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++)
set_irq_chip_and_handler_name(irq, &pb1200_cpld_irq_type,
handle_level_irq, "level");
/*
* GPIO_7 can not be hooked here, so it is hooked upon first
* request of any source attached to the cascade.
*/
set_irq_chained_handler(AU1000_GPIO_7, pb1200_cascade_handler);
}
arch/mips/alchemy/pb1500/Makefile → arch/mips/alchemy/devboards/pb1500/Makefile
浏览文件 @ 9219a3b9
......@@ -5,4 +5,4 @@
# Makefile for the Alchemy Semiconductor Pb1500 board.
#
lib-y := init.o board_setup.o irqmap.o
obj-y := board_setup.o
arch/mips/alchemy/pb1500/board_setup.c → arch/mips/alchemy/devboards/pb1500/board_setup.c
浏览文件 @ 9219a3b9
......@@ -25,20 +25,64 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1500.h>
#include <prom.h>
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
{ AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
};
const char *get_system_type(void)
{
return "Alchemy Pb1500";
}
void board_reset(void)
{
/* Hit BCSR.RST_VDDI[SOFT_RESET] */
au_writel(0x00000000, PB1500_RST_VDDI);
}
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
void __init board_setup(void)
{
u32 pin_func;
u32 sys_freqctrl, sys_clksrc;
char *argptr;
argptr = prom_getcmdline();
#ifdef CONFIG_SERIAL_8250_CONSOLE
argptr = strstr(argptr, "console=");
if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
/* au1000 does not support vra, au1500 and au1100 do */
strcat(argptr, " au1000_audio=vra");
argptr = prom_getcmdline();
#endif
sys_clksrc = sys_freqctrl = pin_func = 0;
/* Set AUX clock to 12 MHz * 8 = 96 MHz */
......
arch/mips/alchemy/pb1550/Makefile → arch/mips/alchemy/devboards/pb1550/Makefile
浏览文件 @ 9219a3b9
......@@ -5,4 +5,4 @@
# Makefile for the Alchemy Semiconductor Pb1550 board.
#
lib-y := init.o board_setup.o irqmap.o
obj-y := board_setup.o
arch/mips/alchemy/pb1550/board_setup.c → arch/mips/alchemy/devboards/pb1550/board_setup.c
浏览文件 @ 9219a3b9
......@@ -28,20 +28,54 @@
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-pb1x00/pb1550.h>
#include <prom.h>
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 },
};
const char *get_system_type(void)
{
return "Alchemy Pb1550";
}
void board_reset(void)
{
/* Hit BCSR.SYSTEM[RESET] */
au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C);
}
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
void __init board_setup(void)
{
u32 pin_func;
#ifdef CONFIG_SERIAL_8250_CONSOLE
char *argptr;
argptr = prom_getcmdline();
argptr = strstr(argptr, "console=");
if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
/*
* Enable PSC1 SYNC for AC'97. Normaly done in audio driver,
* but it is board specific code, so put it here.
......
arch/mips/alchemy/devboards/pm.c 0 → 100644
浏览文件 @ 9219a3b9
/*
* Alchemy Development Board example suspend userspace interface.
*
* (c) 2008 Manuel Lauss <mano@roarinelk.homelinux.net>
*/
#include <linux/init.h>
#include <linux/kobject.h>
#include <linux/suspend.h>
#include <linux/sysfs.h>
#include <asm/mach-au1x00/au1000.h>
/*
* Generic suspend userspace interface for Alchemy development boards.
* This code exports a few sysfs nodes under /sys/power/db1x/ which
* can be used by userspace to en/disable all au1x-provided wakeup
* sources and configure the timeout after which the the TOYMATCH2 irq
* is to trigger a wakeup.
*/
static unsigned long db1x_pm_sleep_secs;
static unsigned long db1x_pm_wakemsk;
static unsigned long db1x_pm_last_wakesrc;
static int db1x_pm_enter(suspend_state_t state)
{
/* enable GPIO based wakeup */
au_writel(1, SYS_PININPUTEN);
/* clear and setup wake cause and source */
au_writel(0, SYS_WAKEMSK);
au_sync();
au_writel(0, SYS_WAKESRC);
au_sync();
au_writel(db1x_pm_wakemsk, SYS_WAKEMSK);
au_sync();
/* setup 1Hz-timer-based wakeup: wait for reg access */
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20)
asm volatile ("nop");
au_writel(au_readl(SYS_TOYREAD) + db1x_pm_sleep_secs, SYS_TOYMATCH2);
au_sync();
/* wait for value to really hit the register */
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20)
asm volatile ("nop");
/* ...and now the sandman can come! */
au_sleep();
return 0;
}
static int db1x_pm_begin(suspend_state_t state)
{
if (!db1x_pm_wakemsk) {
printk(KERN_ERR "db1x: no wakeup source activated!\n");
return -EINVAL;
}
return 0;
}
static void db1x_pm_end(void)
{
/* read and store wakeup source, the clear the register. To
* be able to clear it, WAKEMSK must be cleared first.
*/
db1x_pm_last_wakesrc = au_readl(SYS_WAKESRC);
au_writel(0, SYS_WAKEMSK);
au_writel(0, SYS_WAKESRC);
au_sync();
}
static struct platform_suspend_ops db1x_pm_ops = {
.valid = suspend_valid_only_mem,
.begin = db1x_pm_begin,
.enter = db1x_pm_enter,
.end = db1x_pm_end,
};
#define ATTRCMP(x) (0 == strcmp(attr->attr.name, #x))
static ssize_t db1x_pmattr_show(struct kobject *kobj,
struct kobj_attribute *attr,
char *buf)
{
int idx;
if (ATTRCMP(timer_timeout))
return sprintf(buf, "%lu\n", db1x_pm_sleep_secs);
else if (ATTRCMP(timer))
return sprintf(buf, "%u\n",
!!(db1x_pm_wakemsk & SYS_WAKEMSK_M2));
else if (ATTRCMP(wakesrc))
return sprintf(buf, "%lu\n", db1x_pm_last_wakesrc);
else if (ATTRCMP(gpio0) || ATTRCMP(gpio1) || ATTRCMP(gpio2) ||
ATTRCMP(gpio3) || ATTRCMP(gpio4) || ATTRCMP(gpio5) ||
ATTRCMP(gpio6) || ATTRCMP(gpio7)) {
idx = (attr->attr.name)[4] - '0';
return sprintf(buf, "%d\n",
!!(db1x_pm_wakemsk & SYS_WAKEMSK_GPIO(idx)));
} else if (ATTRCMP(wakemsk)) {
return sprintf(buf, "%08lx\n", db1x_pm_wakemsk);
}
return -ENOENT;
}
static ssize_t db1x_pmattr_store(struct kobject *kobj,
struct kobj_attribute *attr,
const char *instr,
size_t bytes)
{
unsigned long l;
int tmp;
if (ATTRCMP(timer_timeout)) {
tmp = strict_strtoul(instr, 0, &l);
if (tmp)
return tmp;
db1x_pm_sleep_secs = l;
} else if (ATTRCMP(timer)) {
if (instr[0] != '0')
db1x_pm_wakemsk |= SYS_WAKEMSK_M2;
else
db1x_pm_wakemsk &= ~SYS_WAKEMSK_M2;
} else if (ATTRCMP(gpio0) || ATTRCMP(gpio1) || ATTRCMP(gpio2) ||
ATTRCMP(gpio3) || ATTRCMP(gpio4) || ATTRCMP(gpio5) ||
ATTRCMP(gpio6) || ATTRCMP(gpio7)) {
tmp = (attr->attr.name)[4] - '0';
if (instr[0] != '0') {
db1x_pm_wakemsk |= SYS_WAKEMSK_GPIO(tmp);
} else {
db1x_pm_wakemsk &= ~SYS_WAKEMSK_GPIO(tmp);
}
} else if (ATTRCMP(wakemsk)) {
tmp = strict_strtoul(instr, 0, &l);
if (tmp)
return tmp;
db1x_pm_wakemsk = l & 0x0000003f;
} else
bytes = -ENOENT;
return bytes;
}
#define ATTR(x) \
static struct kobj_attribute x##_attribute = \
__ATTR(x, 0664, db1x_pmattr_show, \
db1x_pmattr_store);
ATTR(gpio0) /* GPIO-based wakeup enable */
ATTR(gpio1)
ATTR(gpio2)
ATTR(gpio3)
ATTR(gpio4)
ATTR(gpio5)
ATTR(gpio6)
ATTR(gpio7)
ATTR(timer) /* TOYMATCH2-based wakeup enable */
ATTR(timer_timeout) /* timer-based wakeup timeout value, in seconds */
ATTR(wakesrc) /* contents of SYS_WAKESRC after last wakeup */
ATTR(wakemsk) /* direct access to SYS_WAKEMSK */
#define ATTR_LIST(x) & x ## _attribute.attr
static struct attribute *db1x_pmattrs[] = {
ATTR_LIST(gpio0),
ATTR_LIST(gpio1),
ATTR_LIST(gpio2),
ATTR_LIST(gpio3),
ATTR_LIST(gpio4),
ATTR_LIST(gpio5),
ATTR_LIST(gpio6),
ATTR_LIST(gpio7),
ATTR_LIST(timer),
ATTR_LIST(timer_timeout),
ATTR_LIST(wakesrc),
ATTR_LIST(wakemsk),
NULL, /* terminator */
};
static struct attribute_group db1x_pmattr_group = {
.name = "db1x",
.attrs = db1x_pmattrs,
};
/*
* Initialize suspend interface
*/
static int __init pm_init(void)
{
/* init TOY to tick at 1Hz if not already done. No need to wait
* for confirmation since there's plenty of time from here to
* the next suspend cycle.
*/
if (au_readl(SYS_TOYTRIM) != 32767) {
au_writel(32767, SYS_TOYTRIM);
au_sync();
}
db1x_pm_last_wakesrc = au_readl(SYS_WAKESRC);
au_writel(0, SYS_WAKESRC);
au_sync();
au_writel(0, SYS_WAKEMSK);
au_sync();
suspend_set_ops(&db1x_pm_ops);
return sysfs_create_group(power_kobj, &db1x_pmattr_group);
}
late_initcall(pm_init);
arch/mips/alchemy/pb1550/init.c → arch/mips/alchemy/devboards/prom.c
浏览文件 @ 9219a3b9
/*
* Common code used by all Alchemy develboards.
*
* BRIEF MODULE DESCRIPTION
* Pb1550 board setup
* Extracted from files which had this to say:
*
* Copyright 2001, 2008 MontaVista Software Inc.
* Copyright 2000, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
......@@ -29,15 +29,19 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <asm/bootinfo.h>
#include <asm/mach-au1x00/au1000.h>
#include <prom.h>
const char *get_system_type(void)
{
return "Alchemy Pb1550";
}
#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_DB1000) || \
defined(CONFIG_MIPS_PB1100) || defined(CONFIG_MIPS_DB1100) || \
defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_DB1500) || \
defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE)
#define ALCHEMY_BOARD_DEFAULT_MEMSIZE 0x04000000
#else /* Au1550/Au1200-based develboards */
#define ALCHEMY_BOARD_DEFAULT_MEMSIZE 0x08000000
#endif
void __init prom_init(void)
{
......@@ -51,8 +55,8 @@ void __init prom_init(void)
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
if (!memsize_str)
memsize = 0x08000000;
memsize = ALCHEMY_BOARD_DEFAULT_MEMSIZE;
else
strict_strtol(memsize_str, 0, &memsize);
strict_strtoul(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
arch/mips/alchemy/mtx-1/board_setup.c
浏览文件 @ 9219a3b9
......@@ -32,6 +32,8 @@
#include <asm/mach-au1x00/au1000.h>
#include <prom.h>
extern int (*board_pci_idsel)(unsigned int devsel, int assert);
int mtx1_pci_idsel(unsigned int devsel, int assert);
......@@ -43,6 +45,16 @@ void board_reset(void)
void __init board_setup(void)
{
#ifdef CONFIG_SERIAL_8250_CONSOLE
char *argptr;
argptr = prom_getcmdline();
argptr = strstr(argptr, "console=");
if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
/* Enable USB power switch */
au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR);
......
arch/mips/alchemy/mtx-1/init.c
浏览文件 @ 9219a3b9
......@@ -55,6 +55,6 @@ void __init prom_init(void)
if (!memsize_str)
memsize = 0x04000000;
else
strict_strtol(memsize_str, 0, &memsize);
strict_strtoul(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
arch/mips/alchemy/mtx-1/irqmap.c
浏览文件 @ 9219a3b9
......@@ -27,7 +27,7 @@
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
......@@ -42,11 +42,15 @@ char irq_tab_alchemy[][5] __initdata = {
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
{ AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
};
int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
arch/mips/alchemy/pb1000/init.c 已删除 100644 → 0
浏览文件 @ 23ead729
/*
* BRIEF MODULE DESCRIPTION
* Pb1000 board setup
*
* Copyright 2001, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <asm/bootinfo.h>
#include <prom.h>
const char *get_system_type(void)
{
return "Alchemy Pb1000";
}
void __init prom_init(void)
{
unsigned char *memsize_str;
unsigned long memsize;
prom_argc = (int)fw_arg0;
prom_argv = (char **)fw_arg1;
prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
if (!memsize_str)
memsize = 0x04000000;
else
strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
arch/mips/alchemy/pb1000/irqmap.c 已删除 100644 → 0
浏览文件 @ 23ead729
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx irq map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_15, INTC_INT_LOW_LEVEL, 0 },
};
int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
arch/mips/alchemy/pb1100/init.c 已删除 100644 → 0
浏览文件 @ 23ead729
/*
*
* BRIEF MODULE DESCRIPTION
* Pb1100 board setup
*
* Copyright 2002, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <asm/bootinfo.h>
#include <prom.h>
const char *get_system_type(void)
{
return "Alchemy Pb1100";
}
void __init prom_init(void)
{
unsigned char *memsize_str;
unsigned long memsize;
prom_argc = fw_arg0;
prom_argv = (char **)fw_arg1;
prom_envp = (char **)fw_arg3;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
if (!memsize_str)
memsize = 0x04000000;
else
strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
arch/mips/alchemy/pb1100/irqmap.c 已删除 100644 → 0
浏览文件 @ 23ead729
/*
* BRIEF MODULE DESCRIPTION
* Au1xx0 IRQ map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <asm/mach-au1x00/au1000.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */
{ AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card STSCHG# */
{ AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card IRQ# */
{ AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, /* DC_IRQ# */
};
int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
arch/mips/alchemy/pb1200/init.c 已删除 100644 → 0
浏览文件 @ 23ead729
/*
*
* BRIEF MODULE DESCRIPTION
* PB1200 board setup
*
* Copyright 2001, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <asm/bootinfo.h>
#include <prom.h>
const char *get_system_type(void)
{
return "Alchemy Pb1200";
}
void __init prom_init(void)
{
unsigned char *memsize_str;
unsigned long memsize;
prom_argc = (int)fw_arg0;
prom_argv = (char **)fw_arg1;
prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
if (!memsize_str)
memsize = 0x08000000;
else
strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
arch/mips/alchemy/pb1500/init.c 已删除 100644 → 0
浏览文件 @ 23ead729
/*
*
* BRIEF MODULE DESCRIPTION
* Pb1500 board setup
*
* Copyright 2001, 2008 MontaVista Software Inc.
* Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <asm/bootinfo.h>
#include <prom.h>
const char *get_system_type(void)
{
return "Alchemy Pb1500";
}
void __init prom_init(void)
{
unsigned char *memsize_str;
unsigned long memsize;
prom_argc = (int)fw_arg0;
prom_argv = (char **)fw_arg1;
prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
if (!memsize_str)
memsize = 0x04000000;
else
strict_strtol(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
arch/mips/alchemy/pb1500/irqmap.c 已删除 100644 → 0
浏览文件 @ 23ead729
/*
* BRIEF MODULE DESCRIPTION
* Au1xxx irq map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
};
int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
arch/mips/alchemy/pb1550/irqmap.c 已删除 100644 → 0
浏览文件 @ 23ead729
/*
* BRIEF MODULE DESCRIPTION
* Au1xx0 IRQ map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
* NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/init.h>
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
[12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
[13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
};
int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
arch/mips/alchemy/xxs1500/board_setup.c
浏览文件 @ 9219a3b9
......@@ -28,6 +28,8 @@
#include <asm/mach-au1x00/au1000.h>
#include <prom.h>
void board_reset(void)
{
/* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
......@@ -38,6 +40,16 @@ void __init board_setup(void)
{
u32 pin_func;
#ifdef CONFIG_SERIAL_8250_CONSOLE
char *argptr;
argptr = prom_getcmdline();
argptr = strstr(argptr, "console=");
if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
/* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */
pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
pin_func |= SYS_PF_UR3;
......
arch/mips/alchemy/xxs1500/init.c
浏览文件 @ 9219a3b9
......@@ -53,6 +53,6 @@ void __init prom_init(void)
if (!memsize_str)
memsize = 0x04000000;
else
strict_strtol(memsize_str, 0, &memsize);
strict_strtoul(memsize_str, 0, &memsize);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
arch/mips/alchemy/xxs1500/irqmap.c
浏览文件 @ 9219a3b9
......@@ -27,23 +27,26 @@
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mach-au1x00/au1000.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 },
{ AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 },
{ AU1500_GPIO_207, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_2, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_3, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_4, INTC_INT_LOW_LEVEL, 0 }, /* CF interrupt */
{ AU1000_GPIO_5, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 },
{ AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* CF interrupt */
{ AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 },
};
int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
void __init board_init_irq(void)
{
au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map));
}
arch/mips/cavium-octeon/Kconfig 0 → 100644
浏览文件 @ 9219a3b9
config CAVIUM_OCTEON_SPECIFIC_OPTIONS
bool "Enable Octeon specific options"
depends on CPU_CAVIUM_OCTEON
default "y"
config CAVIUM_OCTEON_2ND_KERNEL
bool "Build the kernel to be used as a 2nd kernel on the same chip"
depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
default "n"
help
This option configures this kernel to be linked at a different
address and use the 2nd uart for output. This allows a kernel built
with this option to be run at the same time as one built without this
option.
config CAVIUM_OCTEON_HW_FIX_UNALIGNED
bool "Enable hardware fixups of unaligned loads and stores"
depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
default "y"
help
Configure the Octeon hardware to automatically fix unaligned loads
and stores. Normally unaligned accesses are fixed using a kernel
exception handler. This option enables the hardware automatic fixups,
which requires only an extra 3 cycles. Disable this option if you
are running code that relies on address exceptions on unaligned
accesses.
config CAVIUM_OCTEON_CVMSEG_SIZE
int "Number of L1 cache lines reserved for CVMSEG memory"
depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
range 0 54
default 1
help
CVMSEG LM is a segment that accesses portions of the dcache as a
local memory; the larger CVMSEG is, the smaller the cache is.
This selects the size of CVMSEG LM, which is in cache blocks. The
legally range is from zero to 54 cache blocks (i.e. CVMSEG LM is
between zero and 6192 bytes).
config CAVIUM_OCTEON_LOCK_L2
bool "Lock often used kernel code in the L2"
depends on CAVIUM_OCTEON_SPECIFIC_OPTIONS
default "y"
help
Enable locking parts of the kernel into the L2 cache.
config CAVIUM_OCTEON_LOCK_L2_TLB
bool "Lock the TLB handler in L2"
depends on CAVIUM_OCTEON_LOCK_L2
default "y"
help
Lock the low level TLB fast path into L2.
config CAVIUM_OCTEON_LOCK_L2_EXCEPTION
bool "Lock the exception handler in L2"
depends on CAVIUM_OCTEON_LOCK_L2
default "y"
help
Lock the low level exception handler into L2.
config CAVIUM_OCTEON_LOCK_L2_LOW_LEVEL_INTERRUPT
bool "Lock the interrupt handler in L2"
depends on CAVIUM_OCTEON_LOCK_L2
default "y"
help
Lock the low level interrupt handler into L2.
config CAVIUM_OCTEON_LOCK_L2_INTERRUPT
bool "Lock the 2nd level interrupt handler in L2"
depends on CAVIUM_OCTEON_LOCK_L2
default "y"
help
Lock the 2nd level interrupt handler in L2.
config CAVIUM_OCTEON_LOCK_L2_MEMCPY
bool "Lock memcpy() in L2"
depends on CAVIUM_OCTEON_LOCK_L2
default "y"
help
Lock the kernel's implementation of memcpy() into L2.
config ARCH_SPARSEMEM_ENABLE
def_bool y
select SPARSEMEM_STATIC
depends on CPU_CAVIUM_OCTEON
arch/mips/cavium-octeon/Makefile 0 → 100644
浏览文件 @ 9219a3b9
#
# Makefile for the Cavium Octeon specific kernel interface routines
# under Linux.
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 2005-2008 Cavium Networks
#
obj-y := setup.o serial.o octeon-irq.o csrc-octeon.o
obj-y += dma-octeon.o flash_setup.o
obj-y += octeon-memcpy.o
obj-$(CONFIG_SMP) += smp.o
arch/mips/cavium-octeon/csrc-octeon.c 0 → 100644
浏览文件 @ 9219a3b9
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2007 by Ralf Baechle
*/
#include <linux/clocksource.h>
#include <linux/init.h>
#include <asm/time.h>
#include <asm/octeon/octeon.h>
#include <asm/octeon/cvmx-ipd-defs.h>
/*
* Set the current core's cvmcount counter to the value of the
* IPD_CLK_COUNT. We do this on all cores as they are brought
* on-line. This allows for a read from a local cpu register to
* access a synchronized counter.
*
*/
void octeon_init_cvmcount(void)
{
unsigned long flags;
unsigned loops = 2;
/* Clobber loops so GCC will not unroll the following while loop. */
asm("" : "+r" (loops));
local_irq_save(flags);
/*
* Loop several times so we are executing from the cache,
* which should give more deterministic timing.
*/
while (loops--)
write_c0_cvmcount(cvmx_read_csr(CVMX_IPD_CLK_COUNT));
local_irq_restore(flags);
}
static cycle_t octeon_cvmcount_read(void)
{
return read_c0_cvmcount();
}
static struct clocksource clocksource_mips = {
.name = "OCTEON_CVMCOUNT",
.read = octeon_cvmcount_read,
.mask = CLOCKSOURCE_MASK(64),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
void __init plat_time_init(void)
{
clocksource_mips.rating = 300;
clocksource_set_clock(&clocksource_mips, mips_hpt_frequency);
clocksource_register(&clocksource_mips);
}
arch/mips/cavium-octeon/dma-octeon.c 0 → 100644
浏览文件 @ 9219a3b9
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2000 Ani Joshi <ajoshi@unixbox.com>
* Copyright (C) 2000, 2001 Ralf Baechle <ralf@gnu.org>
* Copyright (C) 2005 Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com>
* swiped from i386, and cloned for MIPS by Geert, polished by Ralf.
* IP32 changes by Ilya.
* Cavium Networks: Create new dma setup for Cavium Networks Octeon based on
* the kernels original.
*/
#include <linux/types.h>
#include <linux/mm.h>
#include <dma-coherence.h>
dma_addr_t octeon_map_dma_mem(struct device *dev, void *ptr, size_t size)
{
/* Without PCI/PCIe this function can be called for Octeon internal
devices such as USB. These devices all support 64bit addressing */
mb();
return virt_to_phys(ptr);
}
void octeon_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr)
{
/* Without PCI/PCIe this function can be called for Octeon internal
* devices such as USB. These devices all support 64bit addressing */
return;
}
arch/mips/cavium-octeon/executive/Makefile 0 → 100644
浏览文件 @ 9219a3b9
#
# Makefile for the Cavium Octeon specific kernel interface routines
# under Linux.
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 2005-2008 Cavium Networks
#
obj-y += cvmx-bootmem.o cvmx-l2c.o cvmx-sysinfo.o octeon-model.o
arch/mips/cavium-octeon/executive/cvmx-bootmem.c 0 → 100644
浏览文件 @ 9219a3b9
/***********************license start***************
* Author: Cavium Networks
*
* Contact: support@caviumnetworks.com
* This file is part of the OCTEON SDK
*
* Copyright (c) 2003-2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful, but
* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
* NONINFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this file; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
* or visit http://www.gnu.org/licenses/.
*
* This file may also be available under a different license from Cavium.
* Contact Cavium Networks for more information
***********************license end**************************************/
/*
* Simple allocate only memory allocator. Used to allocate memory at
* application start time.
*/
#include <linux/kernel.h>
#include <asm/octeon/cvmx.h>
#include <asm/octeon/cvmx-spinlock.h>
#include <asm/octeon/cvmx-bootmem.h>
/*#define DEBUG */
static struct cvmx_bootmem_desc *cvmx_bootmem_desc;
/* See header file for descriptions of functions */
/*
* Wrapper functions are provided for reading/writing the size and
* next block values as these may not be directly addressible (in 32
* bit applications, for instance.) Offsets of data elements in
* bootmem list, must match cvmx_bootmem_block_header_t.
*/
#define NEXT_OFFSET 0
#define SIZE_OFFSET 8
static void cvmx_bootmem_phy_set_size(uint64_t addr, uint64_t size)
{
cvmx_write64_uint64((addr + SIZE_OFFSET) | (1ull << 63), size);
}
static void cvmx_bootmem_phy_set_next(uint64_t addr, uint64_t next)
{
cvmx_write64_uint64((addr + NEXT_OFFSET) | (1ull << 63), next);
}
static uint64_t cvmx_bootmem_phy_get_size(uint64_t addr)
{
return cvmx_read64_uint64((addr + SIZE_OFFSET) | (1ull << 63));
}
static uint64_t cvmx_bootmem_phy_get_next(uint64_t addr)
{
return cvmx_read64_uint64((addr + NEXT_OFFSET) | (1ull << 63));
}
void *cvmx_bootmem_alloc_range(uint64_t size, uint64_t alignment,
uint64_t min_addr, uint64_t max_addr)
{
int64_t address;
address =
cvmx_bootmem_phy_alloc(size, min_addr, max_addr, alignment, 0);
if (address > 0)
return cvmx_phys_to_ptr(address);
else
return NULL;
}
void *cvmx_bootmem_alloc_address(uint64_t size, uint64_t address,
uint64_t alignment)
{
return cvmx_bootmem_alloc_range(size, alignment, address,
address + size);
}
void *cvmx_bootmem_alloc(uint64_t size, uint64_t alignment)
{
return cvmx_bootmem_alloc_range(size, alignment, 0, 0);
}
int cvmx_bootmem_free_named(char *name)
{
return cvmx_bootmem_phy_named_block_free(name, 0);
}
struct cvmx_bootmem_named_block_desc *cvmx_bootmem_find_named_block(char *name)
{
return cvmx_bootmem_phy_named_block_find(name, 0);
}
void cvmx_bootmem_lock(void)
{
cvmx_spinlock_lock((cvmx_spinlock_t *) &(cvmx_bootmem_desc->lock));
}
void cvmx_bootmem_unlock(void)
{
cvmx_spinlock_unlock((cvmx_spinlock_t *) &(cvmx_bootmem_desc->lock));
}
int cvmx_bootmem_init(void *mem_desc_ptr)
{
/* Here we set the global pointer to the bootmem descriptor
* block. This pointer will be used directly, so we will set
* it up to be directly usable by the application. It is set
* up as follows for the various runtime/ABI combinations:
*
* Linux 64 bit: Set XKPHYS bit
* Linux 32 bit: use mmap to create mapping, use virtual address
* CVMX 64 bit: use physical address directly
* CVMX 32 bit: use physical address directly
*
* Note that the CVMX environment assumes the use of 1-1 TLB
* mappings so that the physical addresses can be used
* directly
*/
if (!cvmx_bootmem_desc) {
#if defined(CVMX_ABI_64)
/* Set XKPHYS bit */
cvmx_bootmem_desc = cvmx_phys_to_ptr(CAST64(mem_desc_ptr));
#else
cvmx_bootmem_desc = (struct cvmx_bootmem_desc *) mem_desc_ptr;
#endif
}
return 0;
}
/*
* The cvmx_bootmem_phy* functions below return 64 bit physical
* addresses, and expose more features that the cvmx_bootmem_functions
* above. These are required for full memory space access in 32 bit
* applications, as well as for using some advance features. Most
* applications should not need to use these.
*/
int64_t cvmx_bootmem_phy_alloc(uint64_t req_size, uint64_t address_min,
uint64_t address_max, uint64_t alignment,
uint32_t flags)
{
uint64_t head_addr;
uint64_t ent_addr;
/* points to previous list entry, NULL current entry is head of list */
uint64_t prev_addr = 0;
uint64_t new_ent_addr = 0;
uint64_t desired_min_addr;
#ifdef DEBUG
cvmx_dprintf("cvmx_bootmem_phy_alloc: req_size: 0x%llx, "
"min_addr: 0x%llx, max_addr: 0x%llx, align: 0x%llx\n",
(unsigned long long)req_size,
(unsigned long long)address_min,
(unsigned long long)address_max,
(unsigned long long)alignment);
#endif
if (cvmx_bootmem_desc->major_version > 3) {
cvmx_dprintf("ERROR: Incompatible bootmem descriptor "
"version: %d.%d at addr: %p\n",
(int)cvmx_bootmem_desc->major_version,
(int)cvmx_bootmem_desc->minor_version,
cvmx_bootmem_desc);
goto error_out;
}
/*
* Do a variety of checks to validate the arguments. The
* allocator code will later assume that these checks have
* been made. We validate that the requested constraints are
* not self-contradictory before we look through the list of
* available memory.
*/
/* 0 is not a valid req_size for this allocator */
if (!req_size)
goto error_out;
/* Round req_size up to mult of minimum alignment bytes */
req_size = (req_size + (CVMX_BOOTMEM_ALIGNMENT_SIZE - 1)) &
~(CVMX_BOOTMEM_ALIGNMENT_SIZE - 1);
/*
* Convert !0 address_min and 0 address_max to special case of
* range that specifies an exact memory block to allocate. Do
* this before other checks and adjustments so that this
* tranformation will be validated.
*/
if (address_min && !address_max)
address_max = address_min + req_size;
else if (!address_min && !address_max)
address_max = ~0ull; /* If no limits given, use max limits */
/*
* Enforce minimum alignment (this also keeps the minimum free block
* req_size the same as the alignment req_size.
*/
if (alignment < CVMX_BOOTMEM_ALIGNMENT_SIZE)
alignment = CVMX_BOOTMEM_ALIGNMENT_SIZE;
/*
* Adjust address minimum based on requested alignment (round
* up to meet alignment). Do this here so we can reject
* impossible requests up front. (NOP for address_min == 0)
*/
if (alignment)
address_min = __ALIGN_MASK(address_min, (alignment - 1));
/*
* Reject inconsistent args. We have adjusted these, so this
* may fail due to our internal changes even if this check
* would pass for the values the user supplied.
*/
if (req_size > address_max - address_min)
goto error_out;
/* Walk through the list entries - first fit found is returned */
if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING))
cvmx_bootmem_lock();
head_addr = cvmx_bootmem_desc->head_addr;
ent_addr = head_addr;
for (; ent_addr;
prev_addr = ent_addr,
ent_addr = cvmx_bootmem_phy_get_next(ent_addr)) {
uint64_t usable_base, usable_max;
uint64_t ent_size = cvmx_bootmem_phy_get_size(ent_addr);
if (cvmx_bootmem_phy_get_next(ent_addr)
&& ent_addr > cvmx_bootmem_phy_get_next(ent_addr)) {
cvmx_dprintf("Internal bootmem_alloc() error: ent: "
"0x%llx, next: 0x%llx\n",
(unsigned long long)ent_addr,
(unsigned long long)
cvmx_bootmem_phy_get_next(ent_addr));
goto error_out;
}
/*
* Determine if this is an entry that can satisify the
* request Check to make sure entry is large enough to
* satisfy request.
*/
usable_base =
__ALIGN_MASK(max(address_min, ent_addr), alignment - 1);
usable_max = min(address_max, ent_addr + ent_size);
/*
* We should be able to allocate block at address
* usable_base.
*/
desired_min_addr = usable_base;
/*
* Determine if request can be satisfied from the
* current entry.
*/
if (!((ent_addr + ent_size) > usable_base
&& ent_addr < address_max
&& req_size <= usable_max - usable_base))
continue;
/*
* We have found an entry that has room to satisfy the
* request, so allocate it from this entry. If end
* CVMX_BOOTMEM_FLAG_END_ALLOC set, then allocate from
* the end of this block rather than the beginning.
*/
if (flags & CVMX_BOOTMEM_FLAG_END_ALLOC) {
desired_min_addr = usable_max - req_size;
/*
* Align desired address down to required
* alignment.
*/
desired_min_addr &= ~(alignment - 1);
}
/* Match at start of entry */
if (desired_min_addr == ent_addr) {
if (req_size < ent_size) {
/*
* big enough to create a new block
* from top portion of block.
*/
new_ent_addr = ent_addr + req_size;
cvmx_bootmem_phy_set_next(new_ent_addr,
cvmx_bootmem_phy_get_next(ent_addr));
cvmx_bootmem_phy_set_size(new_ent_addr,
ent_size -
req_size);
/*
* Adjust next pointer as following
* code uses this.
*/
cvmx_bootmem_phy_set_next(ent_addr,
new_ent_addr);
}
/*
* adjust prev ptr or head to remove this
* entry from list.
*/
if (prev_addr)
cvmx_bootmem_phy_set_next(prev_addr,
cvmx_bootmem_phy_get_next(ent_addr));
else
/*
* head of list being returned, so
* update head ptr.
*/
cvmx_bootmem_desc->head_addr =
cvmx_bootmem_phy_get_next(ent_addr);
if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING))
cvmx_bootmem_unlock();
return desired_min_addr;
}
/*
* block returned doesn't start at beginning of entry,
* so we know that we will be splitting a block off
* the front of this one. Create a new block from the
* beginning, add to list, and go to top of loop
* again.
*
* create new block from high portion of
* block, so that top block starts at desired
* addr.
*/
new_ent_addr = desired_min_addr;
cvmx_bootmem_phy_set_next(new_ent_addr,
cvmx_bootmem_phy_get_next
(ent_addr));
cvmx_bootmem_phy_set_size(new_ent_addr,
cvmx_bootmem_phy_get_size
(ent_addr) -
(desired_min_addr -
ent_addr));
cvmx_bootmem_phy_set_size(ent_addr,
desired_min_addr - ent_addr);
cvmx_bootmem_phy_set_next(ent_addr, new_ent_addr);
/* Loop again to handle actual alloc from new block */
}
error_out:
/* We didn't find anything, so return error */
if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING))
cvmx_bootmem_unlock();
return -1;
}
int __cvmx_bootmem_phy_free(uint64_t phy_addr, uint64_t size, uint32_t flags)
{
uint64_t cur_addr;
uint64_t prev_addr = 0; /* zero is invalid */
int retval = 0;
#ifdef DEBUG
cvmx_dprintf("__cvmx_bootmem_phy_free addr: 0x%llx, size: 0x%llx\n",
(unsigned long long)phy_addr, (unsigned long long)size);
#endif
if (cvmx_bootmem_desc->major_version > 3) {
cvmx_dprintf("ERROR: Incompatible bootmem descriptor "
"version: %d.%d at addr: %p\n",
(int)cvmx_bootmem_desc->major_version,
(int)cvmx_bootmem_desc->minor_version,
cvmx_bootmem_desc);
return 0;
}
/* 0 is not a valid size for this allocator */
if (!size)
return 0;
if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING))
cvmx_bootmem_lock();
cur_addr = cvmx_bootmem_desc->head_addr;
if (cur_addr == 0 || phy_addr < cur_addr) {
/* add at front of list - special case with changing head ptr */
if (cur_addr && phy_addr + size > cur_addr)
goto bootmem_free_done; /* error, overlapping section */
else if (phy_addr + size == cur_addr) {
/* Add to front of existing first block */
cvmx_bootmem_phy_set_next(phy_addr,
cvmx_bootmem_phy_get_next
(cur_addr));
cvmx_bootmem_phy_set_size(phy_addr,
cvmx_bootmem_phy_get_size
(cur_addr) + size);
cvmx_bootmem_desc->head_addr = phy_addr;
} else {
/* New block before first block. OK if cur_addr is 0 */
cvmx_bootmem_phy_set_next(phy_addr, cur_addr);
cvmx_bootmem_phy_set_size(phy_addr, size);
cvmx_bootmem_desc->head_addr = phy_addr;
}
retval = 1;
goto bootmem_free_done;
}
/* Find place in list to add block */
while (cur_addr && phy_addr > cur_addr) {
prev_addr = cur_addr;
cur_addr = cvmx_bootmem_phy_get_next(cur_addr);
}
if (!cur_addr) {
/*
* We have reached the end of the list, add on to end,
* checking to see if we need to combine with last
* block
*/
if (prev_addr + cvmx_bootmem_phy_get_size(prev_addr) ==
phy_addr) {
cvmx_bootmem_phy_set_size(prev_addr,
cvmx_bootmem_phy_get_size
(prev_addr) + size);
} else {
cvmx_bootmem_phy_set_next(prev_addr, phy_addr);
cvmx_bootmem_phy_set_size(phy_addr, size);
cvmx_bootmem_phy_set_next(phy_addr, 0);
}
retval = 1;
goto bootmem_free_done;
} else {
/*
* insert between prev and cur nodes, checking for
* merge with either/both.
*/
if (prev_addr + cvmx_bootmem_phy_get_size(prev_addr) ==
phy_addr) {
/* Merge with previous */
cvmx_bootmem_phy_set_size(prev_addr,
cvmx_bootmem_phy_get_size
(prev_addr) + size);
if (phy_addr + size == cur_addr) {
/* Also merge with current */
cvmx_bootmem_phy_set_size(prev_addr,
cvmx_bootmem_phy_get_size(cur_addr) +
cvmx_bootmem_phy_get_size(prev_addr));
cvmx_bootmem_phy_set_next(prev_addr,
cvmx_bootmem_phy_get_next(cur_addr));
}
retval = 1;
goto bootmem_free_done;
} else if (phy_addr + size == cur_addr) {
/* Merge with current */
cvmx_bootmem_phy_set_size(phy_addr,
cvmx_bootmem_phy_get_size
(cur_addr) + size);
cvmx_bootmem_phy_set_next(phy_addr,
cvmx_bootmem_phy_get_next
(cur_addr));
cvmx_bootmem_phy_set_next(prev_addr, phy_addr);
retval = 1;
goto bootmem_free_done;
}
/* It is a standalone block, add in between prev and cur */
cvmx_bootmem_phy_set_size(phy_addr, size);
cvmx_bootmem_phy_set_next(phy_addr, cur_addr);
cvmx_bootmem_phy_set_next(prev_addr, phy_addr);
}
retval = 1;
bootmem_free_done:
if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING))
cvmx_bootmem_unlock();
return retval;
}
struct cvmx_bootmem_named_block_desc *
cvmx_bootmem_phy_named_block_find(char *name, uint32_t flags)
{
unsigned int i;
struct cvmx_bootmem_named_block_desc *named_block_array_ptr;
#ifdef DEBUG
cvmx_dprintf("cvmx_bootmem_phy_named_block_find: %s\n", name);
#endif
/*
* Lock the structure to make sure that it is not being
* changed while we are examining it.
*/
if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING))
cvmx_bootmem_lock();
/* Use XKPHYS for 64 bit linux */
named_block_array_ptr = (struct cvmx_bootmem_named_block_desc *)
cvmx_phys_to_ptr(cvmx_bootmem_desc->named_block_array_addr);
#ifdef DEBUG
cvmx_dprintf
("cvmx_bootmem_phy_named_block_find: named_block_array_ptr: %p\n",
named_block_array_ptr);
#endif
if (cvmx_bootmem_desc->major_version == 3) {
for (i = 0;
i < cvmx_bootmem_desc->named_block_num_blocks; i++) {
if ((name && named_block_array_ptr[i].size
&& !strncmp(name, named_block_array_ptr[i].name,
cvmx_bootmem_desc->named_block_name_len
- 1))
|| (!name && !named_block_array_ptr[i].size)) {
if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING))
cvmx_bootmem_unlock();
return &(named_block_array_ptr[i]);
}
}
} else {
cvmx_dprintf("ERROR: Incompatible bootmem descriptor "
"version: %d.%d at addr: %p\n",
(int)cvmx_bootmem_desc->major_version,
(int)cvmx_bootmem_desc->minor_version,
cvmx_bootmem_desc);
}
if (!(flags & CVMX_BOOTMEM_FLAG_NO_LOCKING))
cvmx_bootmem_unlock();
return NULL;
}
int cvmx_bootmem_phy_named_block_free(char *name, uint32_t flags)
{
struct cvmx_bootmem_named_block_desc *named_block_ptr;
if (cvmx_bootmem_desc->major_version != 3) {
cvmx_dprintf("ERROR: Incompatible bootmem descriptor version: "
"%d.%d at addr: %p\n",
(int)cvmx_bootmem_desc->major_version,
(int)cvmx_bootmem_desc->minor_version,
cvmx_bootmem_desc);
return 0;
}
#ifdef DEBUG
cvmx_dprintf("cvmx_bootmem_phy_named_block_free: %s\n", name);
#endif
/*
* Take lock here, as name lookup/block free/name free need to
* be atomic.
*/
cvmx_bootmem_lock();
named_block_ptr =
cvmx_bootmem_phy_named_block_find(name,
CVMX_BOOTMEM_FLAG_NO_LOCKING);
if (named_block_ptr) {
#ifdef DEBUG
cvmx_dprintf("cvmx_bootmem_phy_named_block_free: "
"%s, base: 0x%llx, size: 0x%llx\n",
name,
(unsigned long long)named_block_ptr->base_addr,
(unsigned long long)named_block_ptr->size);
#endif
__cvmx_bootmem_phy_free(named_block_ptr->base_addr,
named_block_ptr->size,
CVMX_BOOTMEM_FLAG_NO_LOCKING);
named_block_ptr->size = 0;
/* Set size to zero to indicate block not used. */
}
cvmx_bootmem_unlock();
return named_block_ptr != NULL; /* 0 on failure, 1 on success */
}
arch/mips/cavium-octeon/executive/cvmx-l2c.c 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/cavium-octeon/executive/cvmx-sysinfo.c 0 → 100644
浏览文件 @ 9219a3b9
/***********************license start***************
* Author: Cavium Networks
*
* Contact: support@caviumnetworks.com
* This file is part of the OCTEON SDK
*
* Copyright (c) 2003-2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful, but
* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
* NONINFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this file; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
* or visit http://www.gnu.org/licenses/.
*
* This file may also be available under a different license from Cavium.
* Contact Cavium Networks for more information
***********************license end**************************************/
/*
* This module provides system/board/application information obtained
* by the bootloader.
*/
#include <asm/octeon/cvmx.h>
#include <asm/octeon/cvmx-spinlock.h>
#include <asm/octeon/cvmx-sysinfo.h>
/**
* This structure defines the private state maintained by sysinfo module.
*
*/
static struct {
struct cvmx_sysinfo sysinfo; /* system information */
cvmx_spinlock_t lock; /* mutex spinlock */
} state = {
.lock = CVMX_SPINLOCK_UNLOCKED_INITIALIZER
};
/*
* Global variables that define the min/max of the memory region set
* up for 32 bit userspace access.
*/
uint64_t linux_mem32_min;
uint64_t linux_mem32_max;
uint64_t linux_mem32_wired;
uint64_t linux_mem32_offset;
/**
* This function returns the application information as obtained
* by the bootloader. This provides the core mask of the cores
* running the same application image, as well as the physical
* memory regions available to the core.
*
* Returns Pointer to the boot information structure
*
*/
struct cvmx_sysinfo *cvmx_sysinfo_get(void)
{
return &(state.sysinfo);
}
/**
* This function is used in non-simple executive environments (such as
* Linux kernel, u-boot, etc.) to configure the minimal fields that
* are required to use simple executive files directly.
*
* Locking (if required) must be handled outside of this
* function
*
* @phy_mem_desc_ptr:
* Pointer to global physical memory descriptor
* (bootmem descriptor) @board_type: Octeon board
* type enumeration
*
* @board_rev_major:
* Board major revision
* @board_rev_minor:
* Board minor revision
* @cpu_clock_hz:
* CPU clock freqency in hertz
*
* Returns 0: Failure
* 1: success
*/
int cvmx_sysinfo_minimal_initialize(void *phy_mem_desc_ptr,
uint16_t board_type,
uint8_t board_rev_major,
uint8_t board_rev_minor,
uint32_t cpu_clock_hz)
{
/* The sysinfo structure was already initialized */
if (state.sysinfo.board_type)
return 0;
memset(&(state.sysinfo), 0x0, sizeof(state.sysinfo));
state.sysinfo.phy_mem_desc_ptr = phy_mem_desc_ptr;
state.sysinfo.board_type = board_type;
state.sysinfo.board_rev_major = board_rev_major;
state.sysinfo.board_rev_minor = board_rev_minor;
state.sysinfo.cpu_clock_hz = cpu_clock_hz;
return 1;
}
arch/mips/cavium-octeon/executive/octeon-model.c 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/cavium-octeon/flash_setup.c 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/cavium-octeon/octeon-irq.c 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/cavium-octeon/octeon-memcpy.S 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/cavium-octeon/serial.c 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/cavium-octeon/setup.c 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/cavium-octeon/smp.c 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/configs/cavium-octeon_defconfig 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/cpu.h
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/hazards.h
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/io.h
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/mach-cavium-octeon/irq.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/mach-cavium-octeon/war.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/mipsregs.h
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/module.h
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/cvmx-asm.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/cvmx-bootinfo.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/cvmx-bootmem.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/cvmx-ciu-defs.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/cvmx-gpio-defs.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/cvmx-iob-defs.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/cvmx-ipd-defs.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/cvmx-l2c-defs.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/cvmx-l2c.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/cvmx-l2d-defs.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/cvmx-l2t-defs.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/cvmx-led-defs.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/cvmx-mio-defs.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/cvmx-packet.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/cvmx-pow-defs.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/cvmx-spinlock.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/cvmx-sysinfo.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/cvmx.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/octeon-feature.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/octeon-model.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/octeon/octeon.h 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/processor.h
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/ptrace.h
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/smp.h
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/stackframe.h
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/include/asm/time.h
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/kernel/Makefile
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/kernel/asm-offsets.c
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/kernel/branch.c
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/kernel/cevt-r4k.c
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/kernel/cpu-probe.c
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/kernel/csrc-r4k.c
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/kernel/genex.S
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/kernel/irq.c
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/kernel/octeon_switch.S 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/kernel/ptrace32.c
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/kernel/traps.c
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/lib/Makefile
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/mm/Makefile
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/mm/c-octeon.c 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/mm/cache.c
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/mm/cex-oct.S 0 → 100644
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/mm/dma-default.c
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/mm/tlb-r4k.c
浏览文件 @ 9219a3b9
此差异已折叠。
arch/mips/mm/tlbex.c
浏览文件 @ 9219a3b9
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或