Use the new x86 setup code for x86-64; unify with i386

This unifies arch/*/boot (except arch/*/boot/compressed) between
i386 and x86-64, and uses the new x86 setup code for x86-64 as well.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

arch/x86_64/boot/Makefile

 #
 # arch/x86_64/boot/Makefile
 #
-# This file is subject to the terms and conditions of the GNU General Public
-# License.  See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-#
-
-# ROOT_DEV specifies the default root-device when making the image.
-# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
-# the default of FLOPPY is used by 'build'.
-
-ROOT_DEV := CURRENT
-
-# If you want to preset the SVGA mode, uncomment the next line and
-# set SVGA_MODE to whatever number you want.
-# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
-# The number is the same as you would ordinarily press at bootup.
-
-SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
-
-# If you want the RAM disk device, define this to be the size in blocks.
-
-#RAMDISK := -DRAMDISK=512
-
-targets		:= vmlinux.bin bootsect bootsect.o \
-		   setup setup.o bzImage mtools.conf
-
-EXTRA_CFLAGS := -m32
-
-hostprogs-y	:= tools/build
-HOST_EXTRACFLAGS += $(LINUXINCLUDE)
-subdir-		:= compressed/	#Let make clean descend in compressed/
-# ---------------------------------------------------------------------------
-
-$(obj)/bzImage: IMAGE_OFFSET := 0x100000
-$(obj)/bzImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
-$(obj)/bzImage: BUILDFLAGS   := -b
-
-quiet_cmd_image = BUILD   $@
-cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/bootsect $(obj)/setup \
-	    $(obj)/vmlinux.bin $(ROOT_DEV) > $@
-
-$(obj)/bzImage: $(obj)/bootsect $(obj)/setup \
-			      $(obj)/vmlinux.bin $(obj)/tools/build FORCE
-	$(call if_changed,image)
-	@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
-
-$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
-	$(call if_changed,objcopy)
-
-LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary
-LDFLAGS_setup	 := -Ttext 0x0 -s --oformat binary -e begtext
-
-$(obj)/setup $(obj)/bootsect: %: %.o FORCE
-	$(call if_changed,ld)
-
-$(obj)/compressed/vmlinux: FORCE
-	$(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
-
-# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel
-FDARGS = 
-# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel
-FDINITRD =
-
-image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,)
-
-$(obj)/mtools.conf: $(src)/mtools.conf.in
-	sed -e 's|@OBJ@|$(obj)|g' < $< > $@
-
-# This requires write access to /dev/fd0
-zdisk: $(BOOTIMAGE) $(obj)/mtools.conf
-	MTOOLSRC=$(obj)/mtools.conf mformat a:			; sync
-	syslinux /dev/fd0					; sync
-	echo '$(image_cmdline)' | \
-		MTOOLSRC=$(obj)/mtools.conf mcopy - a:syslinux.cfg
-	if [ -f '$(FDINITRD)' ] ; then \
-		MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \
-	fi
-	MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux	; sync
-
-# These require being root or having syslinux 2.02 or higher installed
-fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf
-	dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440
-	MTOOLSRC=$(obj)/mtools.conf mformat v:			; sync
-	syslinux $(obj)/fdimage					; sync
-	echo '$(image_cmdline)' | \
-		MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg
-	if [ -f '$(FDINITRD)' ] ; then \
-		MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \
-	fi
-	MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux	; sync
-
-fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf
-	dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880
-	MTOOLSRC=$(obj)/mtools.conf mformat w:			; sync
-	syslinux $(obj)/fdimage					; sync
-	echo '$(image_cmdline)' | \
-		MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg
-	if [ -f '$(FDINITRD)' ] ; then \
-		MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \
-	fi
-	MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux	; sync
-
-isoimage: $(BOOTIMAGE)
-	-rm -rf $(obj)/isoimage
-	mkdir $(obj)/isoimage
-	for i in lib lib64 share end ; do \
-		if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \
-			cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \
-			break ; \
-		fi ; \
-		if [ $$i = end ] ; then exit 1 ; fi ; \
-	done
-	cp $(BOOTIMAGE) $(obj)/isoimage/linux
-	echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg
-	if [ -f '$(FDINITRD)' ] ; then \
-		cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \
-	fi
-	mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \
-		-no-emul-boot -boot-load-size 4 -boot-info-table \
-		$(obj)/isoimage
-	rm -rf $(obj)/isoimage
-
-zlilo: $(BOOTIMAGE)
-	if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
-	if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
-	cat $(BOOTIMAGE) > $(INSTALL_PATH)/vmlinuz
-	cp System.map $(INSTALL_PATH)/
-	if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
+# The actual boot code is shared with i386 including the Makefile.
+# So tell kbuild that we fetch the code from i386 and include the
+# Makefile from i386 too.
 
-install:
-	sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
+src := arch/i386/boot
+include $(src)/Makefile

arch/x86_64/boot/bootsect.S

-/*
- *	bootsect.S		Copyright (C) 1991, 1992 Linus Torvalds
- *
- *	modified by Drew Eckhardt
- *	modified by Bruce Evans (bde)
- *	modified by Chris Noe (May 1999) (as86 -> gas)
- *	gutted by H. Peter Anvin (Jan 2003)
- *
- * BIG FAT NOTE: We're in real mode using 64k segments.  Therefore segment
- * addresses must be multiplied by 16 to obtain their respective linear
- * addresses. To avoid confusion, linear addresses are written using leading
- * hex while segment addresses are written as segment:offset.
- *
- */
-
-#include <asm/boot.h>
-
-SETUPSECTS	= 4			/* default nr of setup-sectors */
-BOOTSEG		= 0x07C0		/* original address of boot-sector */
-INITSEG		= DEF_INITSEG		/* we move boot here - out of the way */
-SETUPSEG	= DEF_SETUPSEG		/* setup starts here */
-SYSSEG		= DEF_SYSSEG		/* system loaded at 0x10000 (65536) */
-SYSSIZE		= DEF_SYSSIZE		/* system size: # of 16-byte clicks */
-					/* to be loaded */
-ROOT_DEV	= 0 			/* ROOT_DEV is now written by "build" */
-SWAP_DEV	= 0			/* SWAP_DEV is now written by "build" */
-
-#ifndef SVGA_MODE
-#define SVGA_MODE ASK_VGA
-#endif
-
-#ifndef RAMDISK
-#define RAMDISK 0
-#endif
-
-#ifndef ROOT_RDONLY
-#define ROOT_RDONLY 1
-#endif
-
-.code16
-.text
-
-.global _start
-_start:
-
-	# Normalize the start address
-	jmpl	$BOOTSEG, $start2
-
-start2:
-	movw	%cs, %ax
-	movw	%ax, %ds
-	movw	%ax, %es
-	movw	%ax, %ss
-	movw	$0x7c00, %sp
-	sti
-	cld
-
-	movw	$bugger_off_msg, %si
-
-msg_loop:
-	lodsb
-	andb	%al, %al
-	jz	die
-	movb	$0xe, %ah
-	movw	$7, %bx
-	int	$0x10
-	jmp	msg_loop
-
-die:
-	# Allow the user to press a key, then reboot
-	xorw	%ax, %ax
-	int	$0x16
-	int	$0x19
-
-	# int 0x19 should never return.  In case it does anyway,
-	# invoke the BIOS reset code...
-	ljmp	$0xf000,$0xfff0
-
-
-bugger_off_msg:
-	.ascii	"Direct booting from floppy is no longer supported.\r\n"
-	.ascii	"Please use a boot loader program instead.\r\n"
-	.ascii	"\n"
-	.ascii	"Remove disk and press any key to reboot . . .\r\n"
-	.byte	0
-
-
-	# Kernel attributes; used by setup
-
-	.org 497
-setup_sects:	.byte SETUPSECTS
-root_flags:	.word ROOT_RDONLY
-syssize:	.word SYSSIZE
-swap_dev:	.word SWAP_DEV
-ram_size:	.word RAMDISK
-vid_mode:	.word SVGA_MODE
-root_dev:	.word ROOT_DEV
-boot_flag:	.word 0xAA55

arch/x86_64/boot/compressed/Makefile

@@ -7,11 +7,12 @@
 #
 
 targets		:= vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
-EXTRA_AFLAGS	:= -traditional
 
-# cannot use EXTRA_CFLAGS because base CFLAGS contains -mkernel which conflicts with
-# -m32
-CFLAGS := -m64 -D__KERNEL__ -Iinclude -O2  -fno-strict-aliasing -fPIC -mcmodel=small -fno-builtin
+CFLAGS := -m64 -D__KERNEL__ $(LINUXINCLUDE) -O2  \
+	  -fno-strict-aliasing -fPIC -mcmodel=small \
+	   $(call cc-option, -ffreestanding) \
+	   $(call cc-option, -fno-stack-protector)
+AFLAGS  := $(CFLAGS) -D__ASSEMBLY__
 LDFLAGS := -m elf_x86_64
 
 LDFLAGS_vmlinux := -T

arch/x86_64/boot/install.sh

-#!/bin/sh
-. $srctree/arch/i386/boot/install.sh

arch/x86_64/boot/mtools.conf.in

-#
-# mtools configuration file for "make (b)zdisk"
-#
-
-# Actual floppy drive
-drive a:
-  file="/dev/fd0"
-
-# 1.44 MB floppy disk image
-drive v:
-  file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=18 filter
-
-# 2.88 MB floppy disk image (mostly for virtual uses)
-drive w:
-  file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=36 filter
-
-

arch/x86_64/boot/tools/build.c

-/*
- *  Copyright (C) 1991, 1992  Linus Torvalds
- *  Copyright (C) 1997 Martin Mares
- */
-
-/*
- * This file builds a disk-image from three different files:
- *
- * - bootsect: compatibility mbr which prints an error message if
- *             someone tries to boot the kernel directly.
- * - setup: 8086 machine code, sets up system parm
- * - system: 80386 code for actual system
- *
- * It does some checking that all files are of the correct type, and
- * just writes the result to stdout, removing headers and padding to
- * the right amount. It also writes some system data to stderr.
- */
-
-/*
- * Changes by tytso to allow root device specification
- * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
- * Cross compiling fixes by Gertjan van Wingerde, July 1996
- * Rewritten by Martin Mares, April 1997
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <stdarg.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/sysmacros.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <asm/boot.h>
-
-typedef unsigned char byte;
-typedef unsigned short word;
-typedef unsigned long u32;
-
-#define DEFAULT_MAJOR_ROOT 0
-#define DEFAULT_MINOR_ROOT 0
-
-/* Minimal number of setup sectors (see also bootsect.S) */
-#define SETUP_SECTS 4
-
-byte buf[1024];
-int fd;
-int is_big_kernel;
-
-void die(const char * str, ...)
-{
-	va_list args;
-	va_start(args, str);
-	vfprintf(stderr, str, args);
-	fputc('\n', stderr);
-	exit(1);
-}
-
-void file_open(const char *name)
-{
-	if ((fd = open(name, O_RDONLY, 0)) < 0)
-		die("Unable to open `%s': %m", name);
-}
-
-void usage(void)
-{
-	die("Usage: build [-b] bootsect setup system [rootdev] [> image]");
-}
-
-int main(int argc, char ** argv)
-{
-	unsigned int i, c, sz, setup_sectors;
-	u32 sys_size;
-	byte major_root, minor_root;
-	struct stat sb;
-
-	if (argc > 2 && !strcmp(argv[1], "-b"))
-	  {
-	    is_big_kernel = 1;
-	    argc--, argv++;
-	  }
-	if ((argc < 4) || (argc > 5))
-		usage();
-	if (argc > 4) {
-		if (!strcmp(argv[4], "CURRENT")) {
-			if (stat("/", &sb)) {
-				perror("/");
-				die("Couldn't stat /");
-			}
-			major_root = major(sb.st_dev);
-			minor_root = minor(sb.st_dev);
-		} else if (strcmp(argv[4], "FLOPPY")) {
-			if (stat(argv[4], &sb)) {
-				perror(argv[4]);
-				die("Couldn't stat root device.");
-			}
-			major_root = major(sb.st_rdev);
-			minor_root = minor(sb.st_rdev);
-		} else {
-			major_root = 0;
-			minor_root = 0;
-		}
-	} else {
-		major_root = DEFAULT_MAJOR_ROOT;
-		minor_root = DEFAULT_MINOR_ROOT;
-	}
-	fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
-
-	file_open(argv[1]);
-	i = read(fd, buf, sizeof(buf));
-	fprintf(stderr,"Boot sector %d bytes.\n",i);
-	if (i != 512)
-		die("Boot block must be exactly 512 bytes");
-	if (buf[510] != 0x55 || buf[511] != 0xaa)
-		die("Boot block hasn't got boot flag (0xAA55)");
-	buf[508] = minor_root;
-	buf[509] = major_root;
-	if (write(1, buf, 512) != 512)
-		die("Write call failed");
-	close (fd);
-
-	file_open(argv[2]);				    /* Copy the setup code */
-	for (i=0 ; (c=read(fd, buf, sizeof(buf)))>0 ; i+=c )
-		if (write(1, buf, c) != c)
-			die("Write call failed");
-	if (c != 0)
-		die("read-error on `setup'");
-	close (fd);
-
-	setup_sectors = (i + 511) / 512;	/* Pad unused space with zeros */
-	/* for compatibility with ancient versions of LILO. */
-	if (setup_sectors < SETUP_SECTS)
-		setup_sectors = SETUP_SECTS;
-	fprintf(stderr, "Setup is %d bytes.\n", i);
-	memset(buf, 0, sizeof(buf));
-	while (i < setup_sectors * 512) {
-		c = setup_sectors * 512 - i;
-		if (c > sizeof(buf))
-			c = sizeof(buf);
-		if (write(1, buf, c) != c)
-			die("Write call failed");
-		i += c;
-	}
-
-	file_open(argv[3]);
-	if (fstat (fd, &sb))
-		die("Unable to stat `%s': %m", argv[3]);
-	sz = sb.st_size;
-	fprintf (stderr, "System is %d kB\n", sz/1024);
-	sys_size = (sz + 15) / 16;
-	if (!is_big_kernel && sys_size > DEF_SYSSIZE)
-		die("System is too big. Try using bzImage or modules.");
-	while (sz > 0) {
-		int l, n;
-
-		l = (sz > sizeof(buf)) ? sizeof(buf) : sz;
-		if ((n=read(fd, buf, l)) != l) {
-			if (n < 0)
-				die("Error reading %s: %m", argv[3]);
-			else
-				die("%s: Unexpected EOF", argv[3]);
-		}
-		if (write(1, buf, l) != l)
-			die("Write failed");
-		sz -= l;
-	}
-	close(fd);
-
-	if (lseek(1, 497, SEEK_SET) != 497)		    /* Write sizes to the bootsector */
-		die("Output: seek failed");
-	buf[0] = setup_sectors;
-	if (write(1, buf, 1) != 1)
-		die("Write of setup sector count failed");
-	if (lseek(1, 500, SEEK_SET) != 500)
-		die("Output: seek failed");
-	buf[0] = (sys_size & 0xff);
-	buf[1] = ((sys_size >> 8) & 0xff);
-	buf[2] = ((sys_size >> 16) & 0xff);
-	buf[3] = ((sys_size >> 24) & 0xff);
-	if (write(1, buf, 4) != 4)
-		die("Write of image length failed");
-
-	return 0;					    /* Everything is OK */
-}