提交 91a38540 编写于 作者: L Lars-Peter Clausen 提交者: Mark Brown

ASoC: imx-ssi: Set dma data early

Move the call to snd_soc_dai_set_dma_data from the hw_params callback to the
startup callback. This allows us to use the dma data in the pcm driver's open
callback.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Tested-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 f7085641
......@@ -233,6 +233,23 @@ static int imx_ssi_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
return 0;
}
static int imx_ssi_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *cpu_dai)
{
struct imx_ssi *ssi = snd_soc_dai_get_drvdata(cpu_dai);
struct imx_pcm_dma_params *dma_data;
/* Tx/Rx config */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
dma_data = &ssi->dma_params_tx;
else
dma_data = &ssi->dma_params_rx;
snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
return 0;
}
/*
* Should only be called when port is inactive (i.e. SSIEN = 0),
* although can be called multiple times by upper layers.
......@@ -242,23 +259,17 @@ static int imx_ssi_hw_params(struct snd_pcm_substream *substream,
struct snd_soc_dai *cpu_dai)
{
struct imx_ssi *ssi = snd_soc_dai_get_drvdata(cpu_dai);
struct imx_pcm_dma_params *dma_data;
u32 reg, sccr;
/* Tx/Rx config */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
reg = SSI_STCCR;
dma_data = &ssi->dma_params_tx;
} else {
else
reg = SSI_SRCCR;
dma_data = &ssi->dma_params_rx;
}
if (ssi->flags & IMX_SSI_SYN)
reg = SSI_STCCR;
snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
sccr = readl(ssi->base + reg) & ~SSI_STCCR_WL_MASK;
/* DAI data (word) size */
......@@ -343,6 +354,7 @@ static int imx_ssi_trigger(struct snd_pcm_substream *substream, int cmd,
}
static const struct snd_soc_dai_ops imx_ssi_pcm_dai_ops = {
.startup = imx_ssi_startup,
.hw_params = imx_ssi_hw_params,
.set_fmt = imx_ssi_set_dai_fmt,
.set_clkdiv = imx_ssi_set_dai_clkdiv,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册