Merge tag 'pinctrl-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control changes from Linus Walleij:
 "These are the accumulated pin control patches for v3.6:
   - Various cleanups to the U300 driver
   - Refactor the pin control core to automatically remove any GPIO
     ranges when the drivers are removed, instead of having the drivers
     do this explicitly.
   - Add a function for registering a batch of GPIO ranges.
   - Fix a number of incorrect but non-regressive error checks.
   - Incremental improvements to the COH901, i.MX and Nomadik drivers
   - Add a one-register-per-pin entirely Device Tree-based pin control
     driver from Tony Lindgren."

* tag 'pinctrl-for-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: Add one-register-per-pin type device tree based pinctrl driver
  pinctrl/nomadik: add spi2_oc1_2 pin group
  pinctrl/nomadik: kerneldoc fix
  pinctrl/nomadik: use devm_* allocators for gpio probe
  pinctrl/nomadik: add pin group to mco function
  pinctrl/nomadik: add hsit_a_2 pin group
  pinctrl/nomadik: add pin group smcs1 and smps0
  pinctrl/nomadik: fix hsir_a_1_pins pin list
  pinctrl: pinctrl-imx: fix map setting problem if NO_PAD_CTL is set
  pinctrl/coh901: use clk_prepare_[en|dis]able()
  pinctrl/pinctrl-tegra: remove IS_ERR checking of pmx->pctl
  pinctrl/pinctrl-spear: remove IS_ERR checking of pmx->pctl
  pinctrl/u300: drop unused variable
  pinctrl: select the proper symbol
  pinctrl: add pinctrl_add_gpio_ranges function
  pinctrl: remove pinctrl_remove_gpio_range
  pinctrl/pinctrl-core: cleanup pinctrl_register
  pinctrl/u300: delete pointless debug print
  pinctrl/pinctrl-u300: remove devm_kfree at driver unload

Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt

+One-register-per-pin type device tree based pinctrl driver
+
+Required properties:
+- compatible : "pinctrl-single"
+
+- reg : offset and length of the register set for the mux registers
+
+- pinctrl-single,register-width : pinmux register access width in bits
+
+- pinctrl-single,function-mask : mask of allowed pinmux function bits
+  in the pinmux register
+
+Optional properties:
+- pinctrl-single,function-off : function off mode for disabled state if
+  available and same for all registers; if not specified, disabling of
+  pin functions is ignored
+
+This driver assumes that there is only one register for each pin,
+and uses the common pinctrl bindings as specified in the pinctrl-bindings.txt
+document in this directory.
+
+The pin configuration nodes for pinctrl-single are specified as pinctrl
+register offset and value pairs using pinctrl-single,pins. Only the bits
+specified in pinctrl-single,function-mask are updated. For example, setting
+a pin for a device could be done with:
+
+	pinctrl-single,pins = <0xdc 0x118>;
+
+Where 0xdc is the offset from the pinctrl register base address for the
+device pinctrl register, and 0x118 contains the desired value of the
+pinctrl register. See the device example and static board pins example
+below for more information.
+
+Example:
+
+/* SoC common file */
+
+/* first controller instance for pins in core domain */
+pmx_core: pinmux@4a100040 {
+	compatible = "pinctrl-single";
+	reg = <0x4a100040 0x0196>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-single,register-width = <16>;
+	pinctrl-single,function-mask = <0xffff>;
+};
+
+/* second controller instance for pins in wkup domain */
+pmx_wkup: pinmux@4a31e040 {
+	compatible = "pinctrl-single;
+	reg = <0x4a31e040 0x0038>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-single,register-width = <16>;
+	pinctrl-single,function-mask = <0xffff>;
+};
+
+
+/* board specific .dts file */
+
+&pmx_core {
+
+	/*
+	 * map all board specific static pins enabled by the pinctrl driver
+	 * itself during the boot (or just set them up in the bootloader)
+	 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&board_pins>;
+
+	board_pins: pinmux_board_pins {
+		pinctrl-single,pins = <
+			0x6c 0xf
+			0x6e 0xf
+			0x70 0xf
+			0x72 0xf
+		>;
+	};
+
+	/* map uart2 pins */
+	uart2_pins: pinmux_uart2_pins {
+		pinctrl-single,pins = <
+			0xd8 0x118
+			0xda 0
+			0xdc 0x118
+			0xde 0
+		>;
+	};
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins>;
+};

drivers/pinctrl/Kconfig

@@ -102,6 +102,14 @@ config PINCTRL_PXA910
 	select PINCTRL_PXA3xx
 	select PINCONF
 
+config PINCTRL_SINGLE
+	tristate "One-register-per-pin type device tree based pinctrl driver"
+	depends on OF
+	select PINMUX
+	select PINCONF
+	help
+	  This selects the device tree based generic pinctrl driver.
+
 config PINCTRL_SIRF
 	bool "CSR SiRFprimaII pin controller driver"
 	depends on ARCH_PRIMA2
@@ -130,7 +138,7 @@ config PINCTRL_U300
 
 config PINCTRL_COH901
 	bool "ST-Ericsson U300 COH 901 335/571 GPIO"
-	depends on GPIOLIB && ARCH_U300 && PINMUX_U300
+	depends on GPIOLIB && ARCH_U300 && PINCTRL_U300
 	help
 	  Say yes here to support GPIO interface on ST-Ericsson U300.
 	  The names of the two IP block variants supported are

drivers/pinctrl/Makefile

@@ -22,6 +22,7 @@ obj-$(CONFIG_PINCTRL_NOMADIK)	+= pinctrl-nomadik.o
 obj-$(CONFIG_PINCTRL_DB8500)	+= pinctrl-nomadik-db8500.o
 obj-$(CONFIG_PINCTRL_PXA168)	+= pinctrl-pxa168.o
 obj-$(CONFIG_PINCTRL_PXA910)	+= pinctrl-pxa910.o
+obj-$(CONFIG_PINCTRL_SINGLE)	+= pinctrl-single.o
 obj-$(CONFIG_PINCTRL_SIRF)	+= pinctrl-sirf.o
 obj-$(CONFIG_PINCTRL_TEGRA)	+= pinctrl-tegra.o
 obj-$(CONFIG_PINCTRL_TEGRA20)	+= pinctrl-tegra20.o

drivers/pinctrl/core.c

@@ -332,19 +332,16 @@ void pinctrl_add_gpio_range(struct pinctrl_dev *pctldev,
 }
 EXPORT_SYMBOL_GPL(pinctrl_add_gpio_range);
 
-/**
- * pinctrl_remove_gpio_range() - remove a range of GPIOs fro a pin controller
- * @pctldev: pin controller device to remove the range from
- * @range: the GPIO range to remove
- */
-void pinctrl_remove_gpio_range(struct pinctrl_dev *pctldev,
-			       struct pinctrl_gpio_range *range)
+void pinctrl_add_gpio_ranges(struct pinctrl_dev *pctldev,
+			     struct pinctrl_gpio_range *ranges,
+			     unsigned nranges)
 {
-	mutex_lock(&pinctrl_mutex);
-	list_del(&range->node);
-	mutex_unlock(&pinctrl_mutex);
+	int i;
+
+	for (i = 0; i < nranges; i++)
+		pinctrl_add_gpio_range(pctldev, &ranges[i]);
 }
-EXPORT_SYMBOL_GPL(pinctrl_remove_gpio_range);
+EXPORT_SYMBOL_GPL(pinctrl_add_gpio_ranges);
 
 /**
  * pinctrl_get_group_selector() - returns the group selector for a group
@@ -1395,9 +1392,9 @@ struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc,
 	struct pinctrl_dev *pctldev;
 	int ret;
 
-	if (pctldesc == NULL)
+	if (!pctldesc)
 		return NULL;
-	if (pctldesc->name == NULL)
+	if (!pctldesc->name)
 		return NULL;
 
 	pctldev = kzalloc(sizeof(*pctldev), GFP_KERNEL);
@@ -1415,23 +1412,20 @@ struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc,
 	pctldev->dev = dev;
 
 	/* check core ops for sanity */
-	ret = pinctrl_check_ops(pctldev);
-	if (ret) {
+	if (pinctrl_check_ops(pctldev)) {
 		dev_err(dev, "pinctrl ops lacks necessary functions\n");
 		goto out_err;
 	}
 
 	/* If we're implementing pinmuxing, check the ops for sanity */
 	if (pctldesc->pmxops) {
-		ret = pinmux_check_ops(pctldev);
-		if (ret)
+		if (pinmux_check_ops(pctldev))
 			goto out_err;
 	}
 
 	/* If we're implementing pinconfig, check the ops for sanity */
 	if (pctldesc->confops) {
-		ret = pinconf_check_ops(pctldev);
-		if (ret)
+		if (pinconf_check_ops(pctldev))
 			goto out_err;
 	}
 
@@ -1457,11 +1451,9 @@ struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc,
 		if (IS_ERR(s)) {
 			dev_dbg(dev, "failed to lookup the default state\n");
 		} else {
-			ret = pinctrl_select_state_locked(pctldev->p, s);
-			if (ret) {
+			if (pinctrl_select_state_locked(pctldev->p, s))
 				dev_err(dev,
 					"failed to select default state\n");
-			}
 		}
 	}
 
@@ -1485,6 +1477,7 @@ EXPORT_SYMBOL_GPL(pinctrl_register);
  */
 void pinctrl_unregister(struct pinctrl_dev *pctldev)
 {
+	struct pinctrl_gpio_range *range, *n;
 	if (pctldev == NULL)
 		return;
 
@@ -1500,6 +1493,10 @@ void pinctrl_unregister(struct pinctrl_dev *pctldev)
 	/* Destroy descriptor tree */
 	pinctrl_free_pindescs(pctldev, pctldev->desc->pins,
 			      pctldev->desc->npins);
+	/* remove gpio ranges map */
+	list_for_each_entry_safe(range, n, &pctldev->gpio_ranges, node)
+		list_del(&range->node);
+
 	kfree(pctldev);
 
 	mutex_unlock(&pinctrl_mutex);

drivers/pinctrl/pinctrl-coh901.c

@@ -770,7 +770,7 @@ static int __init u300_gpio_probe(struct platform_device *pdev)
 		dev_err(gpio->dev, "could not get GPIO clock\n");
 		goto err_no_clk;
 	}
-	err = clk_enable(gpio->clk);
+	err = clk_prepare_enable(gpio->clk);
 	if (err) {
 		dev_err(gpio->dev, "could not enable GPIO clock\n");
 		goto err_no_clk_enable;
@@ -912,7 +912,7 @@ static int __init u300_gpio_probe(struct platform_device *pdev)
 	release_mem_region(gpio->memres->start, resource_size(gpio->memres));
 err_no_ioregion:
 err_no_resource:
-	clk_disable(gpio->clk);
+	clk_disable_unprepare(gpio->clk);
 err_no_clk_enable:
 	clk_put(gpio->clk);
 err_no_clk:
@@ -943,7 +943,7 @@ static int __exit u300_gpio_remove(struct platform_device *pdev)
 	iounmap(gpio->base);
 	release_mem_region(gpio->memres->start,
 			   resource_size(gpio->memres));
-	clk_disable(gpio->clk);
+	clk_disable_unprepare(gpio->clk);
 	clk_put(gpio->clk);
 	platform_set_drvdata(pdev, NULL);
 	kfree(gpio);

drivers/pinctrl/pinctrl-imx.c

@@ -146,7 +146,7 @@ static int imx_dt_node_to_map(struct pinctrl_dev *pctldev,
 	struct pinctrl_map *new_map;
 	struct device_node *parent;
 	int map_num = 1;
-	int i;
+	int i, j;
 
 	/*
 	 * first find the group of this node and check if we need create
@@ -184,13 +184,14 @@ static int imx_dt_node_to_map(struct pinctrl_dev *pctldev,
 
 	/* create config map */
 	new_map++;
-	for (i = 0; i < grp->npins; i++) {
+	for (i = j = 0; i < grp->npins; i++) {
 		if (!(grp->configs[i] & IMX_NO_PAD_CTL)) {
-			new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN;
-			new_map[i].data.configs.group_or_pin =
+			new_map[j].type = PIN_MAP_TYPE_CONFIGS_PIN;
+			new_map[j].data.configs.group_or_pin =
 					pin_get_name(pctldev, grp->pins[i]);
-			new_map[i].data.configs.configs = &grp->configs[i];
-			new_map[i].data.configs.num_configs = 1;
+			new_map[j].data.configs.configs = &grp->configs[i];
+			new_map[j].data.configs.num_configs = 1;
+			j++;
 		}
 	}
 

drivers/pinctrl/pinctrl-nomadik-db8500.c

@@ -467,9 +467,12 @@ static const unsigned mc1_a_1_pins[] = { DB8500_PIN_AH16, DB8500_PIN_AG15,
 	DB8500_PIN_AH15 };
 static const unsigned mc1dir_a_1_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AG12,
 	DB8500_PIN_AH12, DB8500_PIN_AH11 };
-static const unsigned hsir_a_1_pins[] = { DB8500_PIN_AG10, DB8500_PIN_AH10 };
-static const unsigned hsit_a_1_pins[] = { DB8500_PIN_AJ11, DB8500_PIN_AJ9,
-	DB8500_PIN_AH9, DB8500_PIN_AG9, DB8500_PIN_AG8, DB8500_PIN_AF8 };
+static const unsigned hsir_a_1_pins[] = { DB8500_PIN_AG10, DB8500_PIN_AH10,
+	DB8500_PIN_AJ11 };
+static const unsigned hsit_a_1_pins[] = { DB8500_PIN_AJ9, DB8500_PIN_AH9,
+	DB8500_PIN_AG9, DB8500_PIN_AG8, DB8500_PIN_AF8 };
+static const unsigned hsit_a_2_pins[] = { DB8500_PIN_AJ9, DB8500_PIN_AH9,
+	DB8500_PIN_AG9, DB8500_PIN_AG8 };
 static const unsigned clkout_a_1_pins[] = { DB8500_PIN_AH7, DB8500_PIN_AJ6 };
 static const unsigned clkout_a_2_pins[] = { DB8500_PIN_AG7, DB8500_PIN_AF7 };
 static const unsigned usb_a_1_pins[] = { DB8500_PIN_AF28, DB8500_PIN_AE29,
@@ -508,9 +511,11 @@ static const unsigned sm_b_1_pins[] = { DB8500_PIN_C6, DB8500_PIN_B3,
 	DB8500_PIN_D9, DB8500_PIN_A5, DB8500_PIN_B4, DB8500_PIN_C8,
 	DB8500_PIN_A12, DB8500_PIN_C10, DB8500_PIN_B10, DB8500_PIN_B9,
 	DB8500_PIN_A9, DB8500_PIN_C7, DB8500_PIN_A7, DB8500_PIN_C5,
-	DB8500_PIN_C9, DB8500_PIN_B14 };
-/* This chip select pin can be "ps0" in alt B so have it separately */
+	DB8500_PIN_C9 };
+/* This chip select pin can be "ps0" in alt C so have it separately */
 static const unsigned smcs0_b_1_pins[] = { DB8500_PIN_E8 };
+/* This chip select pin can be "ps1" in alt C so have it separately */
+static const unsigned smcs1_b_1_pins[] = { DB8500_PIN_B14 };
 static const unsigned ipgpio7_b_1_pins[] = { DB8500_PIN_B11 };
 static const unsigned ipgpio2_b_1_pins[] = { DB8500_PIN_C12 };
 static const unsigned ipgpio3_b_1_pins[] = { DB8500_PIN_C11 };
@@ -572,6 +577,7 @@ static const unsigned mc2rstn_c_1_pins[] = { DB8500_PIN_C8 };
 static const unsigned kp_c_1_pins[] = { DB8500_PIN_C9, DB8500_PIN_B11,
 	DB8500_PIN_C12, DB8500_PIN_C11, DB8500_PIN_D17, DB8500_PIN_D16,
 	DB8500_PIN_C23, DB8500_PIN_D23 };
+static const unsigned smps0_c_1_pins[] = { DB8500_PIN_E8 };
 static const unsigned smps1_c_1_pins[] = { DB8500_PIN_B14 };
 static const unsigned u2rxtx_c_3_pins[] = { DB8500_PIN_B17, DB8500_PIN_C16 };
 static const unsigned stmape_c_2_pins[] = { DB8500_PIN_C19, DB8500_PIN_C17,
@@ -595,6 +601,8 @@ static const unsigned kp_oc1_1_pins[] = { DB8500_PIN_C6, DB8500_PIN_B3,
 	DB8500_PIN_D6, DB8500_PIN_B7 };
 static const unsigned spi2_oc1_1_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AG12,
 	DB8500_PIN_AH12, DB8500_PIN_AH11 };
+static const unsigned spi2_oc1_2_pins[] = { DB8500_PIN_AH13, DB8500_PIN_AH12,
+	DB8500_PIN_AH11 };
 
 #define DB8500_PIN_GROUP(a,b) { .name = #a, .pins = a##_pins,		\
 			.npins = ARRAY_SIZE(a##_pins), .altsetting = b }
@@ -610,6 +618,8 @@ static const struct nmk_pingroup nmk_db8500_groups[] = {
 	DB8500_PIN_GROUP(msp0tfstck_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(msp0rfsrck_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(mc0_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(mc0_dat47_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(mc0dat31dir_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(msp1txrx_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(msp1_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(lcdb_a_1, NMK_GPIO_ALT_A),
@@ -631,6 +641,7 @@ static const struct nmk_pingroup nmk_db8500_groups[] = {
 	DB8500_PIN_GROUP(mc1_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(hsir_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(hsit_a_1, NMK_GPIO_ALT_A),
+	DB8500_PIN_GROUP(hsit_a_2, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(clkout_a_1, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(clkout_a_2, NMK_GPIO_ALT_A),
 	DB8500_PIN_GROUP(usb_a_1, NMK_GPIO_ALT_A),
@@ -653,6 +664,7 @@ static const struct nmk_pingroup nmk_db8500_groups[] = {
 	DB8500_PIN_GROUP(kp_b_1, NMK_GPIO_ALT_B),
 	DB8500_PIN_GROUP(sm_b_1, NMK_GPIO_ALT_B),
 	DB8500_PIN_GROUP(smcs0_b_1, NMK_GPIO_ALT_B),
+	DB8500_PIN_GROUP(smcs1_b_1, NMK_GPIO_ALT_B),
 	DB8500_PIN_GROUP(ipgpio7_b_1, NMK_GPIO_ALT_B),
 	DB8500_PIN_GROUP(ipgpio2_b_1, NMK_GPIO_ALT_B),
 	DB8500_PIN_GROUP(ipgpio3_b_1, NMK_GPIO_ALT_B),
@@ -693,6 +705,7 @@ static const struct nmk_pingroup nmk_db8500_groups[] = {
 	DB8500_PIN_GROUP(mc5_c_1, NMK_GPIO_ALT_C),
 	DB8500_PIN_GROUP(mc2rstn_c_1, NMK_GPIO_ALT_C),
 	DB8500_PIN_GROUP(kp_c_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(smps0_c_1, NMK_GPIO_ALT_C),
 	DB8500_PIN_GROUP(smps1_c_1, NMK_GPIO_ALT_C),
 	DB8500_PIN_GROUP(u2rxtx_c_3, NMK_GPIO_ALT_C),
 	DB8500_PIN_GROUP(stmape_c_2, NMK_GPIO_ALT_C),
@@ -709,6 +722,7 @@ static const struct nmk_pingroup nmk_db8500_groups[] = {
 	/* Other alt C1 column, these are still configured as alt C */
 	DB8500_PIN_GROUP(kp_oc1_1, NMK_GPIO_ALT_C),
 	DB8500_PIN_GROUP(spi2_oc1_1, NMK_GPIO_ALT_C),
+	DB8500_PIN_GROUP(spi2_oc1_2, NMK_GPIO_ALT_C),
 };
 
 /* We use this macro to define the groups applicable to a function */
@@ -731,7 +745,7 @@ DB8500_FUNC_GROUPS(ipi2c, "ipi2c_a_1", "ipi2c_a_2");
  */
 DB8500_FUNC_GROUPS(msp0, "msp0txrx_a_1", "msp0tfstck_a_1", "msp0rfstck_a_1",
 		   "msp0txrx_b_1", "msp0sck_b_1");
-DB8500_FUNC_GROUPS(mc0, "mc0_a_1");
+DB8500_FUNC_GROUPS(mc0, "mc0_a_1", "mc0_dat47_a_1", "mc0dat31dir_a_1");
 /* MSP0 can swap RX/TX like MSP0 but has no SCK pin available */
 DB8500_FUNC_GROUPS(msp1, "msp1txrx_a_1", "msp1_a_1", "msp1txrx_b_1");
 DB8500_FUNC_GROUPS(lcdb, "lcdb_a_1");
@@ -752,7 +766,7 @@ DB8500_FUNC_GROUPS(ipgpio, "ipgpio0_a_1", "ipgpio1_a_1", "ipgpio7_b_1",
 DB8500_FUNC_GROUPS(msp2, "msp2sck_a_1", "msp2_a_1");
 DB8500_FUNC_GROUPS(mc4, "mc4_a_1", "mc4rstn_c_1");
 DB8500_FUNC_GROUPS(mc1, "mc1_a_1", "mc1dir_a_1");
-DB8500_FUNC_GROUPS(hsi, "hsir1_a_1", "hsit1_a_1");
+DB8500_FUNC_GROUPS(hsi, "hsir1_a_1", "hsit1_a_1", "hsit_a_2");
 DB8500_FUNC_GROUPS(clkout, "clkout_a_1", "clkout_a_2", "clkout_c_1");
 DB8500_FUNC_GROUPS(usb, "usb_a_1");
 DB8500_FUNC_GROUPS(trig, "trig_b_1");
@@ -768,7 +782,8 @@ DB8500_FUNC_GROUPS(uartmod, "uartmodtx_b_1", "uartmodrx_b_1", "uartmodrx_b_2",
 DB8500_FUNC_GROUPS(stmmod, "stmmod_b_1", "stmmod_c_1");
 DB8500_FUNC_GROUPS(spi3, "spi3_b_1");
 /* Select between CS0 on alt B or PS1 on alt C */
-DB8500_FUNC_GROUPS(sm, "sm_b_1", "smcs0_b_1", "smcleale_c_1", "smps1_c_1");
+DB8500_FUNC_GROUPS(sm, "sm_b_1", "smcs0_b_1", "smcs1_b_1", "smcleale_c_1",
+		   "smps0_c_1", "smps1_c_1");
 DB8500_FUNC_GROUPS(lcda, "lcdaclk_b_1", "lcda_b_1");
 DB8500_FUNC_GROUPS(ddrtrig, "ddrtrig_b_1");
 DB8500_FUNC_GROUPS(pwl, "pwl_b_1", "pwl_b_2", "pwl_b_3", "pwl_b_4");
@@ -783,7 +798,7 @@ DB8500_FUNC_GROUPS(mc5, "mc5_c_1");
 DB8500_FUNC_GROUPS(usbsim, "usbsim_c_1", "usbsim_c_2");
 DB8500_FUNC_GROUPS(i2c3, "i2c3_c_1", "i2c3_c_2");
 DB8500_FUNC_GROUPS(spi0, "spi0_c_1");
-DB8500_FUNC_GROUPS(spi2, "spi2_oc1_1");
+DB8500_FUNC_GROUPS(spi2, "spi2_oc1_1", "spi2_oc1_2");
 
 #define FUNCTION(fname)					\
 	{						\

drivers/pinctrl/pinctrl-nomadik.c

@@ -434,7 +434,7 @@ static int __nmk_config_pins(pin_cfg_t *cfgs, int num, bool sleep)
 /**
  * nmk_config_pin - configure a pin's mux attributes
  * @cfg: pin confguration
- *
+ * @sleep: Non-zero to apply the sleep mode configuration
  * Configures a pin's mode (alternate function or GPIO), its pull up status,
  * and its sleep mode based on the specified configuration.  The @cfg is
  * usually one of the SoC specific macros defined in mach/<soc>-pins.h.  These
@@ -1194,7 +1194,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
 	}
 
 	if (np) {
-		pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+		pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL);
 		if (!pdata)
 			return -ENOMEM;
 
@@ -1229,29 +1229,23 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
 		goto out;
 	}
 
-	if (request_mem_region(res->start, resource_size(res),
-			       dev_name(&dev->dev)) == NULL) {
-		ret = -EBUSY;
-		goto out;
-	}
-
-	base = ioremap(res->start, resource_size(res));
+	base = devm_request_and_ioremap(&dev->dev, res);
 	if (!base) {
 		ret = -ENOMEM;
-		goto out_release;
+		goto out;
 	}
 
-	clk = clk_get(&dev->dev, NULL);
+	clk = devm_clk_get(&dev->dev, NULL);
 	if (IS_ERR(clk)) {
 		ret = PTR_ERR(clk);
-		goto out_unmap;
+		goto out;
 	}
 	clk_prepare(clk);
 
-	nmk_chip = kzalloc(sizeof(*nmk_chip), GFP_KERNEL);
+	nmk_chip = devm_kzalloc(&dev->dev, sizeof(*nmk_chip), GFP_KERNEL);
 	if (!nmk_chip) {
 		ret = -ENOMEM;
-		goto out_clk;
+		goto out;
 	}
 
 	/*
@@ -1286,7 +1280,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
 
 	ret = gpiochip_add(&nmk_chip->chip);
 	if (ret)
-		goto out_free;
+		goto out;
 
 	BUG_ON(nmk_chip->bank >= ARRAY_SIZE(nmk_gpio_chips));
 
@@ -1300,7 +1294,7 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
 	if (!nmk_chip->domain) {
 		pr_err("%s: Failed to create irqdomain\n", np->full_name);
 		ret = -ENOSYS;
-		goto out_free;
+		goto out;
 	}
 
 	nmk_gpio_init_irq(nmk_chip);
@@ -1309,20 +1303,9 @@ static int __devinit nmk_gpio_probe(struct platform_device *dev)
 
 	return 0;
 
-out_free:
-	kfree(nmk_chip);
-out_clk:
-	clk_disable(clk);
-	clk_put(clk);
-out_unmap:
-	iounmap(base);
-out_release:
-	release_mem_region(res->start, resource_size(res));
 out:
 	dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret,
 		  pdata->first_gpio, pdata->first_gpio+31);
-	if (np)
-		kfree(pdata);
 
 	return ret;
 }

drivers/pinctrl/pinctrl-tegra.c

@@ -745,9 +745,9 @@ int __devinit tegra_pinctrl_probe(struct platform_device *pdev,
 	}
 
 	pmx->pctl = pinctrl_register(&tegra_pinctrl_desc, &pdev->dev, pmx);
-	if (IS_ERR(pmx->pctl)) {
+	if (!pmx->pctl) {
 		dev_err(&pdev->dev, "Couldn't register pinctrl driver\n");
-		return PTR_ERR(pmx->pctl);
+		return -ENODEV;
 	}
 
 	pinctrl_add_gpio_range(pmx->pctl, &tegra_pinctrl_gpio_range);
@@ -764,7 +764,6 @@ int __devexit tegra_pinctrl_remove(struct platform_device *pdev)
 {
 	struct tegra_pmx *pmx = platform_get_drvdata(pdev);
 
-	pinctrl_remove_gpio_range(pmx->pctl, &tegra_pinctrl_gpio_range);
 	pinctrl_unregister(pmx->pctl);
 
 	return 0;

drivers/pinctrl/pinctrl-u300.c

@@ -1113,8 +1113,6 @@ static int __devinit u300_pmx_probe(struct platform_device *pdev)
 	int ret;
 	int i;
 
-	pr_err("U300 PMX PROBE\n");
-
 	/* Create state holders etc for this driver */
 	upmx = devm_kzalloc(&pdev->dev, sizeof(*upmx), GFP_KERNEL);
 	if (!upmx)
@@ -1175,15 +1173,11 @@ static int __devinit u300_pmx_probe(struct platform_device *pdev)
 static int __devexit u300_pmx_remove(struct platform_device *pdev)
 {
 	struct u300_pmx *upmx = platform_get_drvdata(pdev);
-	int i;
 
-	for (i = 0; i < ARRAY_SIZE(u300_gpio_ranges); i++)
-		pinctrl_remove_gpio_range(upmx->pctl, &u300_gpio_ranges[i]);
 	pinctrl_unregister(upmx->pctl);
 	iounmap(upmx->virtbase);
 	release_mem_region(upmx->phybase, upmx->physize);
 	platform_set_drvdata(pdev, NULL);
-	devm_kfree(&pdev->dev, upmx);
 
 	return 0;
 }

drivers/pinctrl/spear/pinctrl-spear.c

@@ -336,9 +336,9 @@ int __devinit spear_pinctrl_probe(struct platform_device *pdev,
 	spear_pinctrl_desc.npins = machdata->npins;
 
 	pmx->pctl = pinctrl_register(&spear_pinctrl_desc, &pdev->dev, pmx);
-	if (IS_ERR(pmx->pctl)) {
+	if (!pmx->pctl) {
 		dev_err(&pdev->dev, "Couldn't register pinctrl driver\n");
-		return PTR_ERR(pmx->pctl);
+		return -ENODEV;
 	}
 
 	return 0;

include/linux/pinctrl/pinctrl.h

@@ -131,8 +131,9 @@ extern void pinctrl_unregister(struct pinctrl_dev *pctldev);
 extern bool pin_is_valid(struct pinctrl_dev *pctldev, int pin);
 extern void pinctrl_add_gpio_range(struct pinctrl_dev *pctldev,
 				struct pinctrl_gpio_range *range);
-extern void pinctrl_remove_gpio_range(struct pinctrl_dev *pctldev,
-				struct pinctrl_gpio_range *range);
+extern void pinctrl_add_gpio_ranges(struct pinctrl_dev *pctldev,
+				struct pinctrl_gpio_range *ranges,
+				unsigned nranges);
 extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev);
 extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev);
 #else