m68knommu: make 5307 UART platform addressing consistent

If we make all UART addressing consistent across all ColdFire family members
then we will be able to remove the duplicated plaform data and use a single
setup for all.

So modify the ColdFire 5307 UART addressing so that:

. UARTs are numbered from 0 up
. base addresses are absolute (not relative to MBAR peripheral register)
. use a common name for IRQs used
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>

arch/m68k/include/asm/m5307sim.h

@@ -117,11 +117,11 @@
  *  UART module.
  */
 #if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
-#define MCFUART_BASE1		0x200           /* Base address of UART1 */
-#define MCFUART_BASE2		0x1c0           /* Base address of UART2 */
+#define MCFUART_BASE0		(MCF_MBAR + 0x200)	/* Base address UART0 */
+#define MCFUART_BASE1		(MCF_MBAR + 0x1c0)	/* Base address UART1 */
 #else
-#define MCFUART_BASE1		0x1c0           /* Base address of UART1 */
-#define MCFUART_BASE2		0x200           /* Base address of UART2 */
+#define MCFUART_BASE0		(MCF_MBAR + 0x1c0)	/* Base address UART0 */
+#define MCFUART_BASE1		(MCF_MBAR + 0x200)	/* Base address UART1 */
 #endif
 
 /*
@@ -176,6 +176,8 @@
  */
 #define	MCF_IRQ_TIMER		30		/* Timer0, Level 6 */
 #define	MCF_IRQ_PROFILER	31		/* Timer1, Level 7 */
+#define	MCF_IRQ_UART0		73		/* UART0 */
+#define	MCF_IRQ_UART1		74		/* UART1 */
 
 /****************************************************************************/
 #endif	/* m5307sim_h */

arch/m68k/platform/5307/config.c

@@ -31,12 +31,12 @@ unsigned char ledbank = 0xff;
 
 static struct mcf_platform_uart m5307_uart_platform[] = {
 	{
-		.mapbase	= MCF_MBAR + MCFUART_BASE1,
-		.irq		= 73,
+		.mapbase	= MCFUART_BASE0,
+		.irq		= MCF_IRQ_UART0,
 	},
 	{
-		.mapbase 	= MCF_MBAR + MCFUART_BASE2,
-		.irq		= 74,
+		.mapbase 	= MCFUART_BASE1,
+		.irq		= MCF_IRQ_UART1,
 	},
 	{ },
 };
@@ -57,11 +57,11 @@ static void __init m5307_uart_init_line(int line, int irq)
 {
 	if (line == 0) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR);
-		writeb(irq, MCF_MBAR + MCFUART_BASE1 + MCFUART_UIVR);
+		writeb(irq, MCFUART_BASE0 + MCFUART_UIVR);
 		mcf_mapirq2imr(irq, MCFINTC_UART0);
 	} else if (line == 1) {
 		writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR);
-		writeb(irq, MCF_MBAR + MCFUART_BASE2 + MCFUART_UIVR);
+		writeb(irq, MCFUART_BASE1 + MCFUART_UIVR);
 		mcf_mapirq2imr(irq, MCFINTC_UART1);
 	}
 }