提交 9028f58f 编写于 作者: A Alexey Chernov 提交者: Mauro Carvalho Chehab

[media] support of GoTView PCI-E X5 3D Hybrid in cx23885

Some comments:
1. Everything initialize properly except radio.
2. All analog inputs (TV, composite, S-Video) are tested by myself in several
TV norms (SECAM-D, PAL, NTSC), everything work fine.

So the patch adds general support/detection of the card with working analog
part, DVB part is not supported for now.
Signed-off-by: NAlexey Chernov <4ernov@gmail.com>
Reviewed-by: NSteven Toth <stoth@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 5f63306d
......@@ -309,6 +309,26 @@ struct cx23885_board cx23885_boards[] = {
CX25840_COMPONENT_ON,
} },
},
[CX23885_BOARD_GOTVIEW_X5_3D_HYBRID] = {
.name = "GoTView X5 3D Hybrid",
.tuner_type = TUNER_XC5000,
.tuner_addr = 0x64,
.porta = CX23885_ANALOG_VIDEO,
.portb = CX23885_MPEG_DVB,
.input = {{
.type = CX23885_VMUX_TELEVISION,
.vmux = CX25840_VIN2_CH1 |
CX25840_VIN5_CH2,
.gpio0 = 0x02,
}, {
.type = CX23885_VMUX_COMPOSITE1,
.vmux = CX23885_VMUX_COMPOSITE1,
}, {
.type = CX23885_VMUX_SVIDEO,
.vmux = CX25840_SVIDEO_LUMA3 |
CX25840_SVIDEO_CHROMA4,
} },
},
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
......@@ -496,6 +516,10 @@ struct cx23885_subid cx23885_subids[] = {
.subvendor = 0x107d,
.subdevice = 0x6f22,
.card = CX23885_BOARD_LEADTEK_WINFAST_PXTV1200,
}, {
.subvendor = 0x5654,
.subdevice = 0x2390,
.card = CX23885_BOARD_GOTVIEW_X5_3D_HYBRID,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
......@@ -712,6 +736,10 @@ int cx23885_tuner_callback(void *priv, int component, int command, int arg)
else if (port->nr == 2)
bitmask = 0x04;
break;
case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
/* Tuner Reset Command */
bitmask = 0x02;
break;
}
if (bitmask) {
......@@ -967,6 +995,9 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
/* CX24228 GPIO */
/* Connected to IF / Mux */
break;
case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
cx_set(GP0_IO, 0x00010001); /* Bring the part out of reset */
break;
}
}
......@@ -1218,6 +1249,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1850:
case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
default:
ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
......@@ -1245,6 +1277,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_MAGICPRO_PROHDTVE2:
case CX23885_BOARD_HAUPPAUGE_HVR1290:
case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
case CX23885_BOARD_GOTVIEW_X5_3D_HYBRID:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
"cx25840", 0x88 >> 1, NULL);
......
......@@ -84,6 +84,7 @@
#define CX23885_BOARD_HAUPPAUGE_HVR1290 26
#define CX23885_BOARD_MYGICA_X8558PRO 27
#define CX23885_BOARD_LEADTEK_WINFAST_PXTV1200 28
#define CX23885_BOARD_GOTVIEW_X5_3D_HYBRID 29
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册