USB: storage: Use USB_ prefix instead of US_ prefix

This commit changes prefix for some of the USB mass storage
class related macros (ie. USB_SC_ for subclass and USB_PR_
for class).
Signed-off-by: NMichal Nazarewicz <mina86@mina86.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/block/ub.c

@@ -396,7 +396,7 @@ static int ub_probe_lun(struct ub_dev *sc, int lnum);
 #else
 
 static const struct usb_device_id ub_usb_ids[] = {
-	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, US_SC_SCSI, US_PR_BULK) },
+	{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) },
 	{ }
 };
 

drivers/usb/storage/scsiglue.c

@@ -113,7 +113,7 @@ static int slave_alloc (struct scsi_device *sdev)
 	 * Let the scanning code know if this target merely sets
 	 * Peripheral Device Type to 0x1f to indicate no LUN.
 	 */
-	if (us->subclass == US_SC_UFI)
+	if (us->subclass == USB_SC_UFI)
 		sdev->sdev_target->pdt_1f_for_no_lun = 1;
 
 	return 0;
@@ -176,7 +176,7 @@ static int slave_configure(struct scsi_device *sdev)
 		/* Disk-type devices use MODE SENSE(6) if the protocol
 		 * (SubClass) is Transparent SCSI, otherwise they use
 		 * MODE SENSE(10). */
-		if (us->subclass != US_SC_SCSI && us->subclass != US_SC_CYP_ATACB)
+		if (us->subclass != USB_SC_SCSI && us->subclass != USB_SC_CYP_ATACB)
 			sdev->use_10_for_ms = 1;
 
 		/* Many disks only accept MODE SENSE transfer lengths of
@@ -245,7 +245,7 @@ static int slave_configure(struct scsi_device *sdev)
 		 * capacity will be decremented or is correct. */
 		if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK |
 					US_FL_SCM_MULT_TARG)) &&
-				us->protocol == US_PR_BULK)
+				us->protocol == USB_PR_BULK)
 			us->use_last_sector_hacks = 1;
 	} else {
 
@@ -261,7 +261,7 @@ static int slave_configure(struct scsi_device *sdev)
 	 * scsi_level == 0 (UNKNOWN).  Hence such devices must necessarily
 	 * be single-LUN.
 	 */
-	if ((us->protocol == US_PR_CB || us->protocol == US_PR_CBI) &&
+	if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_CBI) &&
 			sdev->scsi_level == SCSI_UNKNOWN)
 		us->max_lun = 0;
 

drivers/usb/storage/sddr09.c

@@ -1760,7 +1760,7 @@ static int sddr09_probe(struct usb_interface *intf,
 	if (result)
 		return result;
 
-	if (us->protocol == US_PR_DPCM_USB) {
+	if (us->protocol == USB_PR_DPCM_USB) {
 		us->transport_name = "Control/Bulk-EUSB/SDDR09";
 		us->transport = dpcm_transport;
 		us->transport_reset = usb_stor_CB_reset;

drivers/usb/storage/transport.c

@@ -642,7 +642,7 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
 	 * unless the operation involved a data-in transfer.  Devices
 	 * can signal most data-in errors by stalling the bulk-in pipe.
 	 */
-	if ((us->protocol == US_PR_CB || us->protocol == US_PR_DPCM_USB) &&
+	if ((us->protocol == USB_PR_CB || us->protocol == USB_PR_DPCM_USB) &&
 			srb->sc_data_direction != DMA_FROM_DEVICE) {
 		US_DEBUGP("-- CB transport device requiring auto-sense\n");
 		need_auto_sense = 1;
@@ -701,8 +701,8 @@ void usb_stor_invoke_transport(struct scsi_cmnd *srb, struct us_data *us)
 		scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sense_size);
 
 		/* FIXME: we must do the protocol translation here */
-		if (us->subclass == US_SC_RBC || us->subclass == US_SC_SCSI ||
-				us->subclass == US_SC_CYP_ATACB)
+		if (us->subclass == USB_SC_RBC || us->subclass == USB_SC_SCSI ||
+				us->subclass == USB_SC_CYP_ATACB)
 			srb->cmd_len = 6;
 		else
 			srb->cmd_len = 12;
@@ -926,7 +926,7 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
 	/* NOTE: CB does not have a status stage.  Silly, I know.  So
 	 * we have to catch this at a higher level.
 	 */
-	if (us->protocol != US_PR_CBI)
+	if (us->protocol != USB_PR_CBI)
 		return USB_STOR_TRANSPORT_GOOD;
 
 	result = usb_stor_intr_transfer(us, us->iobuf, 2);
@@ -942,7 +942,7 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us)
 	 * that this means we could be ignoring a real error on these
 	 * commands, but that can't be helped.
 	 */
-	if (us->subclass == US_SC_UFI) {
+	if (us->subclass == USB_SC_UFI) {
 		if (srb->cmnd[0] == REQUEST_SENSE ||
 		    srb->cmnd[0] == INQUIRY)
 			return USB_STOR_TRANSPORT_GOOD;

drivers/usb/storage/unusual_alauda.h

@@ -21,11 +21,11 @@
 UNUSUAL_DEV(  0x0584, 0x0008, 0x0102, 0x0102,
 		"Fujifilm",
 		"DPC-R1 (Alauda)",
-		US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0),
+		USB_SC_SCSI, USB_PR_ALAUDA, init_alauda, 0),
 
 UNUSUAL_DEV(  0x07b4, 0x010a, 0x0102, 0x0102,
 		"Olympus",
 		"MAUSB-10 (Alauda)",
-		US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0),
+		USB_SC_SCSI, USB_PR_ALAUDA, init_alauda, 0),
 
 #endif /* defined(CONFIG_USB_STORAGE_ALAUDA) || ... */

drivers/usb/storage/unusual_cypress.h

@@ -23,12 +23,12 @@
 UNUSUAL_DEV(  0x04b4, 0x6830, 0x0000, 0x9999,
 		"Cypress",
 		"Cypress AT2LP",
-		US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0),
+		USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
 
 /* CY7C68310 : support atacb and atacb2 */
 UNUSUAL_DEV(  0x04b4, 0x6831, 0x0000, 0x9999,
 		"Cypress",
 		"Cypress ISD-300LP",
-		US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0),
+		USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0),
 
 #endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */

drivers/usb/storage/unusual_datafab.h

@@ -21,7 +21,7 @@
 UNUSUAL_DEV(  0x07c4, 0xa000, 0x0000, 0x0015,
 		"Datafab",
 		"MDCFE-B USB CF Reader",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		0),
 
 /*
@@ -38,45 +38,45 @@ UNUSUAL_DEV(  0x07c4, 0xa000, 0x0000, 0x0015,
 UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff,
 		"SIIG/Datafab",
 		"SIIG/Datafab Memory Stick+CF Reader/Writer",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		0),
 
 /* Reported by Josef Reisinger <josef.reisinger@netcologne.de> */
 UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff,
 		"Datafab/Unknown",
 		"MD2/MD3 Disk enclosure",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		US_FL_SINGLE_LUN),
 
 UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff,
 		"Datafab/Unknown",
 		"Datafab-based Reader",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		0),
 
 UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff,
 		"Datafab/Unknown",
 		"Datafab-based Reader",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		0),
 
 UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff,
 		"PNY/Datafab",
 		"PNY/Datafab CF+SM Reader",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		0),
 
 UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff,
 		"Simple Tech/Datafab",
 		"Simple Tech/Datafab CF+SM Reader",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		0),
 
 /* Submitted by Olaf Hering <olh@suse.de> */
 UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
 		"Datafab Systems, Inc.",
 		"USB to CF + SM Combo (LC1)",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		0),
 
 /* Reported by Felix Moeller <felix@derklecks.de>
@@ -86,13 +86,13 @@ UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
 UNUSUAL_DEV(  0x07c4, 0xa10b, 0x0000, 0xffff,
 		"DataFab Systems Inc.",
 		"USB CF+MS",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		0),
 
 UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
 		"Acomdata",
 		"CF",
-		US_SC_SCSI, US_PR_DATAFAB, NULL,
+		USB_SC_SCSI, USB_PR_DATAFAB, NULL,
 		US_FL_SINGLE_LUN),
 
 #endif /* defined(CONFIG_USB_STORAGE_DATAFAB) || ... */

drivers/usb/storage/unusual_freecom.h

@@ -21,6 +21,6 @@
 UNUSUAL_DEV(  0x07ab, 0xfc01, 0x0000, 0x9999,
 		"Freecom",
 		"USB-IDE",
-		US_SC_QIC, US_PR_FREECOM, init_freecom, 0),
+		USB_SC_QIC, USB_PR_FREECOM, init_freecom, 0),
 
 #endif /* defined(CONFIG_USB_STORAGE_FREECOM) || ... */

drivers/usb/storage/unusual_isd200.h

@@ -21,37 +21,37 @@
 UNUSUAL_DEV(  0x054c, 0x002b, 0x0100, 0x0110,
 		"Sony",
 		"Portable USB Harddrive V2",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
 		0),
 
 UNUSUAL_DEV(  0x05ab, 0x0031, 0x0100, 0x0110,
 		"In-System",
 		"USB/IDE Bridge (ATA/ATAPI)",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
 		0),
 
 UNUSUAL_DEV(  0x05ab, 0x0301, 0x0100, 0x0110,
 		"In-System",
 		"Portable USB Harddrive V2",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
 		0),
 
 UNUSUAL_DEV(  0x05ab, 0x0351, 0x0100, 0x0110,
 		"In-System",
 		"Portable USB Harddrive V2",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
 		0),
 
 UNUSUAL_DEV(  0x05ab, 0x5701, 0x0100, 0x0110,
 		"In-System",
 		"USB Storage Adapter V2",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
 		0),
 
 UNUSUAL_DEV(  0x0bf6, 0xa001, 0x0100, 0x0110,
 		"ATI",
 		"USB Cable 205",
-		US_SC_ISD200, US_PR_BULK, isd200_Initialization,
+		USB_SC_ISD200, USB_PR_BULK, isd200_Initialization,
 		0),
 
 #endif /* defined(CONFIG_USB_STORAGE_ISD200) || ... */

drivers/usb/storage/unusual_jumpshot.h

@@ -21,7 +21,7 @@
 UNUSUAL_DEV(  0x05dc, 0x0001, 0x0000, 0x0001,
 		"Lexar",
 		"Jumpshot USB CF Reader",
-		US_SC_SCSI, US_PR_JUMPSHOT, NULL,
+		USB_SC_SCSI, USB_PR_JUMPSHOT, NULL,
 		US_FL_NEED_OVERRIDE),
 
 #endif /* defined(CONFIG_USB_STORAGE_JUMPSHOT) || ... */

drivers/usb/storage/unusual_karma.h

@@ -21,6 +21,6 @@
 UNUSUAL_DEV(  0x045a, 0x5210, 0x0101, 0x0101,
 		"Rio",
 		"Rio Karma",
-		US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
+		USB_SC_SCSI, USB_PR_KARMA, rio_karma_init, 0),
 
 #endif /* defined(CONFIG_USB_STORAGE_KARMA) || ... */

drivers/usb/storage/unusual_onetouch.h

@@ -24,13 +24,13 @@
 UNUSUAL_DEV(  0x0d49, 0x7000, 0x0000, 0x9999,
 		"Maxtor",
 		"OneTouch External Harddrive",
-		US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
+		USB_SC_DEVICE, USB_PR_DEVICE, onetouch_connect_input,
 		0),
 
 UNUSUAL_DEV(  0x0d49, 0x7010, 0x0000, 0x9999,
 		"Maxtor",
 		"OneTouch External Harddrive",
-		US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input,
+		USB_SC_DEVICE, USB_PR_DEVICE, onetouch_connect_input,
 		0),
 
 #endif /* defined(CONFIG_USB_STORAGE_ONETOUCH) || ... */

drivers/usb/storage/unusual_sddr09.h

@@ -21,36 +21,36 @@
 UNUSUAL_DEV(  0x0436, 0x0005, 0x0100, 0x0100,
 		"Microtech",
 		"CameraMate (DPCM_USB)",
-		US_SC_SCSI, US_PR_DPCM_USB, NULL, 0),
+		USB_SC_SCSI, USB_PR_DPCM_USB, NULL, 0),
 
 UNUSUAL_DEV(  0x04e6, 0x0003, 0x0000, 0x9999,
 		"Sandisk",
 		"ImageMate SDDR09",
-		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+		USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init,
 		0),
 
 /* This entry is from Andries.Brouwer@cwi.nl */
 UNUSUAL_DEV(  0x04e6, 0x0005, 0x0100, 0x0208,
 		"SCM Microsystems",
 		"eUSB SmartMedia / CompactFlash Adapter",
-		US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
+		USB_SC_SCSI, USB_PR_DPCM_USB, usb_stor_sddr09_dpcm_init,
 		0),
 
 UNUSUAL_DEV(  0x066b, 0x0105, 0x0100, 0x0100,
 		"Olympus",
 		"Camedia MAUSB-2",
-		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+		USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init,
 		0),
 
 UNUSUAL_DEV(  0x0781, 0x0200, 0x0000, 0x9999,
 		"Sandisk",
 		"ImageMate SDDR-09",
-		US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init,
+		USB_SC_SCSI, USB_PR_EUSB_SDDR09, usb_stor_sddr09_init,
 		0),
 
 UNUSUAL_DEV(  0x07af, 0x0006, 0x0100, 0x0100,
 		"Microtech",
 		"CameraMate (DPCM_USB)",
-		US_SC_SCSI, US_PR_DPCM_USB, NULL, 0),
+		USB_SC_SCSI, USB_PR_DPCM_USB, NULL, 0),
 
 #endif /* defined(CONFIG_USB_STORAGE_SDDR09) || ... */

drivers/usb/storage/unusual_sddr55.h

@@ -22,23 +22,23 @@
 UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999,
 		"Datafab",
 		"MDSM-B reader",
-		US_SC_SCSI, US_PR_SDDR55, NULL,
+		USB_SC_SCSI, USB_PR_SDDR55, NULL,
 		US_FL_FIX_INQUIRY),
 
 /* SM part - aeb <Andries.Brouwer@cwi.nl> */
 UNUSUAL_DEV(  0x07c4, 0xa109, 0x0000, 0xffff,
 		"Datafab Systems, Inc.",
 		"USB to CF + SM Combo (LC1)",
-		US_SC_SCSI, US_PR_SDDR55, NULL, 0),
+		USB_SC_SCSI, USB_PR_SDDR55, NULL, 0),
 
 UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff,
 		"Acomdata",
 		"SM",
-		US_SC_SCSI, US_PR_SDDR55, NULL, 0),
+		USB_SC_SCSI, USB_PR_SDDR55, NULL, 0),
 
 UNUSUAL_DEV(  0x55aa, 0xa103, 0x0000, 0x9999,
 		"Sandisk",
 		"ImageMate SDDR55",
-		US_SC_SCSI, US_PR_SDDR55, NULL, 0),
+		USB_SC_SCSI, USB_PR_SDDR55, NULL, 0),
 
 #endif /* defined(CONFIG_USB_STORAGE_SDDR55) || ... */

drivers/usb/storage/unusual_usbat.h

@@ -21,23 +21,23 @@
 UNUSUAL_DEV(  0x03f0, 0x0207, 0x0001, 0x0001,
 		"HP",
 		"CD-Writer+ 8200e",
-		US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
+		USB_SC_8070, USB_PR_USBAT, init_usbat_cd, 0),
 
 UNUSUAL_DEV(  0x03f0, 0x0307, 0x0001, 0x0001,
 		"HP",
 		"CD-Writer+ CD-4e",
-		US_SC_8070, US_PR_USBAT, init_usbat_cd, 0),
+		USB_SC_8070, USB_PR_USBAT, init_usbat_cd, 0),
 
 UNUSUAL_DEV(  0x04e6, 0x1010, 0x0000, 0x9999,
 		"Shuttle/SCM",
 		"USBAT-02",
-		US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
+		USB_SC_SCSI, USB_PR_USBAT, init_usbat_flash,
 		US_FL_SINGLE_LUN),
 
 UNUSUAL_DEV(  0x0781, 0x0005, 0x0005, 0x0005,
 		"Sandisk",
 		"ImageMate SDDR-05b",
-		US_SC_SCSI, US_PR_USBAT, init_usbat_flash,
+		USB_SC_SCSI, USB_PR_USBAT, init_usbat_flash,
 		US_FL_SINGLE_LUN),
 
 #endif /* defined(CONFIG_USB_STORAGE_USBAT) || ... */

drivers/usb/storage/usb.c

@@ -512,10 +512,10 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id,
 
 	/* Store the entries */
 	us->unusual_dev = unusual_dev;
-	us->subclass = (unusual_dev->useProtocol == US_SC_DEVICE) ?
+	us->subclass = (unusual_dev->useProtocol == USB_SC_DEVICE) ?
 			idesc->bInterfaceSubClass :
 			unusual_dev->useProtocol;
-	us->protocol = (unusual_dev->useTransport == US_PR_DEVICE) ?
+	us->protocol = (unusual_dev->useTransport == USB_PR_DEVICE) ?
 			idesc->bInterfaceProtocol :
 			unusual_dev->useTransport;
 	us->fflags = USB_US_ORIG_FLAGS(id->driver_info);
@@ -552,10 +552,10 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id,
 		struct usb_device_descriptor *ddesc = &dev->descriptor;
 		int msg = -1;
 
-		if (unusual_dev->useProtocol != US_SC_DEVICE &&
+		if (unusual_dev->useProtocol != USB_SC_DEVICE &&
 			us->subclass == idesc->bInterfaceSubClass)
 			msg += 1;
-		if (unusual_dev->useTransport != US_PR_DEVICE &&
+		if (unusual_dev->useTransport != USB_PR_DEVICE &&
 			us->protocol == idesc->bInterfaceProtocol)
 			msg += 2;
 		if (msg >= 0 && !(us->fflags & US_FL_NEED_OVERRIDE))
@@ -582,21 +582,21 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id,
 static void get_transport(struct us_data *us)
 {
 	switch (us->protocol) {
-	case US_PR_CB:
+	case USB_PR_CB:
 		us->transport_name = "Control/Bulk";
 		us->transport = usb_stor_CB_transport;
 		us->transport_reset = usb_stor_CB_reset;
 		us->max_lun = 7;
 		break;
 
-	case US_PR_CBI:
+	case USB_PR_CBI:
 		us->transport_name = "Control/Bulk/Interrupt";
 		us->transport = usb_stor_CB_transport;
 		us->transport_reset = usb_stor_CB_reset;
 		us->max_lun = 7;
 		break;
 
-	case US_PR_BULK:
+	case USB_PR_BULK:
 		us->transport_name = "Bulk";
 		us->transport = usb_stor_Bulk_transport;
 		us->transport_reset = usb_stor_Bulk_reset;
@@ -608,35 +608,35 @@ static void get_transport(struct us_data *us)
 static void get_protocol(struct us_data *us)
 {
 	switch (us->subclass) {
-	case US_SC_RBC:
+	case USB_SC_RBC:
 		us->protocol_name = "Reduced Block Commands (RBC)";
 		us->proto_handler = usb_stor_transparent_scsi_command;
 		break;
 
-	case US_SC_8020:
+	case USB_SC_8020:
 		us->protocol_name = "8020i";
 		us->proto_handler = usb_stor_pad12_command;
 		us->max_lun = 0;
 		break;
 
-	case US_SC_QIC:
+	case USB_SC_QIC:
 		us->protocol_name = "QIC-157";
 		us->proto_handler = usb_stor_pad12_command;
 		us->max_lun = 0;
 		break;
 
-	case US_SC_8070:
+	case USB_SC_8070:
 		us->protocol_name = "8070i";
 		us->proto_handler = usb_stor_pad12_command;
 		us->max_lun = 0;
 		break;
 
-	case US_SC_SCSI:
+	case USB_SC_SCSI:
 		us->protocol_name = "Transparent SCSI";
 		us->proto_handler = usb_stor_transparent_scsi_command;
 		break;
 
-	case US_SC_UFI:
+	case USB_SC_UFI:
 		us->protocol_name = "Uniform Floppy Interface (UFI)";
 		us->proto_handler = usb_stor_ufi_command;
 		break;
@@ -679,7 +679,7 @@ static int get_pipes(struct us_data *us)
 		}
 	}
 
-	if (!ep_in || !ep_out || (us->protocol == US_PR_CBI && !ep_int)) {
+	if (!ep_in || !ep_out || (us->protocol == USB_PR_CBI && !ep_int)) {
 		US_DEBUGP("Endpoint sanity check failed! Rejecting dev.\n");
 		return -EIO;
 	}
@@ -834,7 +834,7 @@ static int usb_stor_scan_thread(void * __us)
 	if (!test_bit(US_FLIDX_DONT_SCAN, &us->dflags)) {
 
 		/* For bulk-only devices, determine the max LUN value */
-		if (us->protocol == US_PR_BULK &&
+		if (us->protocol == USB_PR_BULK &&
 				!(us->fflags & US_FL_SINGLE_LUN)) {
 			mutex_lock(&us->dev_mutex);
 			us->max_lun = usb_stor_Bulk_max_lun(us);

include/linux/usb_usual.h

@@ -81,35 +81,36 @@ enum { US_DO_ALL_FLAGS };
 
 /* Sub Classes */
 
-#define US_SC_RBC	0x01		/* Typically, flash devices */
-#define US_SC_8020	0x02		/* CD-ROM */
-#define US_SC_QIC	0x03		/* QIC-157 Tapes */
-#define US_SC_UFI	0x04		/* Floppy */
-#define US_SC_8070	0x05		/* Removable media */
-#define US_SC_SCSI	0x06		/* Transparent */
-#define US_SC_LOCKABLE	0x07		/* Password-protected */
-
-#define US_SC_ISD200    0xf0		/* ISD200 ATA */
-#define US_SC_CYP_ATACB 0xf1		/* Cypress ATACB */
-#define US_SC_DEVICE	0xff		/* Use device's value */
-
-/* Protocols */
-
-#define US_PR_CBI	0x00		/* Control/Bulk/Interrupt */
-#define US_PR_CB	0x01		/* Control/Bulk w/o interrupt */
-#define US_PR_BULK	0x50		/* bulk only */
-
-#define US_PR_USBAT	0x80		/* SCM-ATAPI bridge */
-#define US_PR_EUSB_SDDR09	0x81	/* SCM-SCSI bridge for SDDR-09 */
-#define US_PR_SDDR55	0x82		/* SDDR-55 (made up) */
-#define US_PR_DPCM_USB  0xf0		/* Combination CB/SDDR09 */
-#define US_PR_FREECOM   0xf1		/* Freecom */
-#define US_PR_DATAFAB   0xf2		/* Datafab chipsets */
-#define US_PR_JUMPSHOT  0xf3		/* Lexar Jumpshot */
-#define US_PR_ALAUDA    0xf4		/* Alauda chipsets */
-#define US_PR_KARMA     0xf5		/* Rio Karma */
-
-#define US_PR_DEVICE	0xff		/* Use device's value */
+#define USB_SC_RBC	0x01		/* Typically, flash devices */
+#define USB_SC_8020	0x02		/* CD-ROM */
+#define USB_SC_QIC	0x03		/* QIC-157 Tapes */
+#define USB_SC_UFI	0x04		/* Floppy */
+#define USB_SC_8070	0x05		/* Removable media */
+#define USB_SC_SCSI	0x06		/* Transparent */
+#define USB_SC_LOCKABLE	0x07		/* Password-protected */
+
+#define USB_SC_ISD200	0xf0		/* ISD200 ATA */
+#define USB_SC_CYP_ATACB	0xf1	/* Cypress ATACB */
+#define USB_SC_DEVICE	0xff		/* Use device's value */
+
+/* Storage protocol codes */
+
+#define USB_PR_CBI	0x00		/* Control/Bulk/Interrupt */
+#define USB_PR_CB	0x01		/* Control/Bulk w/o interrupt */
+#define USB_PR_BULK	0x50		/* bulk only */
+#define USB_PR_UAS	0x62		/* USB Attached SCSI */
+
+#define USB_PR_USBAT	0x80		/* SCM-ATAPI bridge */
+#define USB_PR_EUSB_SDDR09	0x81	/* SCM-SCSI bridge for SDDR-09 */
+#define USB_PR_SDDR55	0x82		/* SDDR-55 (made up) */
+#define USB_PR_DPCM_USB	0xf0		/* Combination CB/SDDR09 */
+#define USB_PR_FREECOM	0xf1		/* Freecom */
+#define USB_PR_DATAFAB	0xf2		/* Datafab chipsets */
+#define USB_PR_JUMPSHOT	0xf3		/* Lexar Jumpshot */
+#define USB_PR_ALAUDA	0xf4		/* Alauda chipsets */
+#define USB_PR_KARMA	0xf5		/* Rio Karma */
+
+#define USB_PR_DEVICE	0xff		/* Use device's value */
 
 /*
  */