提交 8f061891 编写于 作者: T Tomas Winkler 提交者: John W. Linville

iwlwifi: setup correctly L1 L0S pi link values

This patch setups L1 L0S pci link values.
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 885ba202
......@@ -100,9 +100,14 @@
#include "iwl-commands.h"
#define PCI_LINK_CTRL 0x0F0
/* PCI registers */
#define PCI_LINK_CTRL 0x0F0 /* 1 byte */
#define PCI_POWER_SOURCE 0x0C8
#define PCI_REG_WUM8 0x0E8
/* PCI register values */
#define PCI_LINK_VAL_L0S_EN 0x01
#define PCI_LINK_VAL_L1_EN 0x02
#define PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT (0x80000000)
#define TFD_QUEUE_SIZE_MAX (256)
......
......@@ -496,6 +496,10 @@ static int iwl4965_apm_init(struct iwl_priv *priv)
iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
/* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */
iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
/* set "initialization complete" bit to move adapter
* D0U* --> D0A* state */
iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
......@@ -514,11 +518,12 @@ static int iwl4965_apm_init(struct iwl_priv *priv)
goto out;
/* enable DMA */
iwl_write_prph(priv, APMG_CLK_CTRL_REG,
APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT);
iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_DMA_CLK_RQT |
APMG_CLK_VAL_BSM_CLK_RQT);
udelay(20);
/* disable L1-Active */
iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
......@@ -546,8 +551,13 @@ static void iwl4965_nic_config(struct iwl_priv *priv)
pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link);
/* disable L1 entry -- workaround for pre-B1 */
pci_write_config_byte(priv->pci_dev, PCI_LINK_CTRL, val_link & ~0x02);
/* L1 is enabled by BIOS */
if ((val_link & PCI_LINK_VAL_L1_EN) == PCI_LINK_VAL_L1_EN)
/* diable L0S disabled L1A enabled */
iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
else
/* L0S enabled L1A disabled */
iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
......
......@@ -63,6 +63,10 @@ static int iwl5000_apm_init(struct iwl_priv *priv)
iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
/* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */
iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL);
/* set "initialization complete" bit to move adapter
......@@ -83,13 +87,13 @@ static int iwl5000_apm_init(struct iwl_priv *priv)
return ret;
/* enable DMA */
iwl_write_prph(priv, APMG_CLK_EN_REG,
APMG_CLK_VAL_DMA_CLK_RQT);
iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT);
udelay(20);
/* disable L1-Active */
iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
iwl_release_nic_access(priv);
......@@ -106,8 +110,13 @@ static void iwl5000_nic_config(struct iwl_priv *priv)
pci_read_config_byte(priv->pci_dev, PCI_LINK_CTRL, &val_link);
/* disable L1 entry -- workaround for pre-B1 */
pci_write_config_byte(priv->pci_dev, PCI_LINK_CTRL, val_link & ~0x02);
/* L1 is enabled by BIOS */
if ((val_link & PCI_LINK_VAL_L1_EN) == PCI_LINK_VAL_L1_EN)
/* diable L0S disabled L1A enabled */
iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
else
/* L0S enabled L1A disabled */
iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
......
......@@ -87,13 +87,14 @@
/* EEPROM reads */
#define CSR_EEPROM_REG (CSR_BASE+0x02c)
#define CSR_EEPROM_GP (CSR_BASE+0x030)
#define CSR_GIO_REG (CSR_BASE+0x03C)
#define CSR_GP_UCODE (CSR_BASE+0x044)
#define CSR_UCODE_DRV_GP1 (CSR_BASE+0x054)
#define CSR_UCODE_DRV_GP1_SET (CSR_BASE+0x058)
#define CSR_UCODE_DRV_GP1_CLR (CSR_BASE+0x05c)
#define CSR_UCODE_DRV_GP2 (CSR_BASE+0x060)
#define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100)
#define CSR_LED_REG (CSR_BASE+0x094)
#define CSR_GIO_CHICKEN_BITS (CSR_BASE+0x100)
/* Analog phase-lock-loop configuration */
#define CSR_ANA_PLL_CFG (CSR_BASE+0x20c)
......@@ -213,6 +214,9 @@
#define CSR_EEPROM_GP_BAD_SIGNATURE (0x00000000)
#define CSR_EEPROM_GP_IF_OWNER_MSK (0x00000180)
/* CSR GIO */
#define CSR_GIO_REG_VAL_L0S_ENABLED (0x00000002)
/* UCODE DRV GP */
#define CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP (0x00000001)
#define CSR_UCODE_SW_BIT_RFKILL (0x00000002)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册