提交 8e8ff02c 编写于 作者: H Hirokazu Takata 提交者: Linus Torvalds

[PATCH] m32r: Fix pt_regs for !COFNIG_ISA_DSP_LEVEL2 target

This modification is required to fix debugging function for m32r targets
with !CONFIG_ISA_DSP_LEVEL2, by unifying 'struct pt_regs' and 'struct
sigcontext' size for all M32R ISA.

Some m32r processor core with !CONFIG_ISA_DSP_LEVEL2 configuration has only
single accumulator a0 (ex.  VDEC2 core, M32102 core, etc.), the others with
CONFIG_ISA_DSP_LEVEL2 has two accumulators, a0 and a1.

This means there are two variations of thread context.  So far, we reduced
and changed stackframe size at a syscall for their context size.  However,
this causes a problem that a GDB for processors with CONFIG_ISA_DSP_LEVEL2
cannot be used for processors with !CONFIG_ISA_DSP_LEVEL2.

From the viewpoint of GDB support, we should reduce such variation of
stackframe size for simplicity.

In this patch, dummy members are added to 'struct pt_regs' and 'struct
sigcontext' to adjust their size for !CONFIG_ISA_DSP_LEVEL2.

This modification is also a one step for a GDB update in future.
Currently, on the m32r, GDB can access process's context by using ptrace
functions in a simple way of register by register access.  By unifying
stackframe size, we have a possibility to make use of ptrace functions of
not only a single register access but also block register access,
PTRACE_{GETREGS,PUTREGS}.

However, for this purpose, we might have to modify stackframe structure
some more; for example, PSW (processor status word) register should be
pre-processed before pushing to stack at a syscall, and so on.  In this
case, we must update carefully both kernel and GDB at a time...
Signed-off-by: NHayato Fujiwara <fujiwara@linux-m32r.org>
Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
Cc: Kei Sakamoto <ksakamot@linux-m32r.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 efe87d2b
......@@ -20,7 +20,7 @@
* Stack layout in 'ret_from_system_call':
* ptrace needs to have all regs on the stack.
* if the order here is changed, it needs to be
* updated in fork.c:copy_process, signal.c:do_signal,
* updated in fork.c:copy_thread, signal.c:do_signal,
* ptrace.c and ptrace.h
*
* M32Rx/M32R2 M32R
......@@ -41,18 +41,17 @@
* @(0x38,sp) - syscall_nr ditto
* @(0x3c,sp) - acc0h @(0x3c,sp) - acch
* @(0x40,sp) - acc0l @(0x40,sp) - accl
* @(0x44,sp) - acc1h @(0x44,sp) - psw
* @(0x48,sp) - acc1l @(0x48,sp) - bpc
* @(0x4c,sp) - psw @(0x4c,sp) - bbpsw
* @(0x50,sp) - bpc @(0x50,sp) - bbpc
* @(0x54,sp) - bbpsw @(0x54,sp) - spu (cr3)
* @(0x58,sp) - bbpc @(0x58,sp) - fp (r13)
* @(0x5c,sp) - spu (cr3) @(0x5c,sp) - lr (r14)
* @(0x60,sp) - fp (r13) @(0x60,sp) - spi (cr12)
* @(0x64,sp) - lr (r14) @(0x64,sp) - orig_r0
* @(0x68,sp) - spi (cr2)
* @(0x6c,sp) - orig_r0
*
* @(0x44,sp) - acc1h @(0x44,sp) - dummy_acc1h
* @(0x48,sp) - acc1l @(0x48,sp) - dummy_acc1l
* @(0x4c,sp) - psw ditto
* @(0x50,sp) - bpc ditto
* @(0x54,sp) - bbpsw ditto
* @(0x58,sp) - bbpc ditto
* @(0x5c,sp) - spu (cr3) ditto
* @(0x60,sp) - fp (r13) ditto
* @(0x64,sp) - lr (r14) ditto
* @(0x68,sp) - spi (cr2) ditto
* @(0x6c,sp) - orig_r0 ditto
*/
#include <linux/config.h>
......@@ -102,6 +101,12 @@
#define ACC0L(reg) @(0x40,reg)
#define ACC1H(reg) @(0x44,reg)
#define ACC1L(reg) @(0x48,reg)
#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
#define ACCH(reg) @(0x3C,reg)
#define ACCL(reg) @(0x40,reg)
#else
#error unknown isa configuration
#endif
#define PSW(reg) @(0x4C,reg)
#define BPC(reg) @(0x50,reg)
#define BBPSW(reg) @(0x54,reg)
......@@ -111,21 +116,6 @@
#define LR(reg) @(0x64,reg)
#define SP(reg) @(0x68,reg)
#define ORIG_R0(reg) @(0x6C,reg)
#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
#define ACCH(reg) @(0x3C,reg)
#define ACCL(reg) @(0x40,reg)
#define PSW(reg) @(0x44,reg)
#define BPC(reg) @(0x48,reg)
#define BBPSW(reg) @(0x4C,reg)
#define BBPC(reg) @(0x50,reg)
#define SPU(reg) @(0x54,reg)
#define FP(reg) @(0x58,reg) /* FP = R13 */
#define LR(reg) @(0x5C,reg)
#define SP(reg) @(0x60,reg)
#define ORIG_R0(reg) @(0x64,reg)
#else
#error unknown isa configuration
#endif
CF_MASK = 0x00000001
TF_MASK = 0x00000100
......@@ -231,7 +221,7 @@ restore_all:
RESTORE_ALL
# perform work that needs to be done immediately before resumption
# r9 : frags
# r9 : flags
ALIGN
work_pending:
and3 r4, r9, #_TIF_NEED_RESCHED
......@@ -1015,4 +1005,3 @@ ENTRY(sys_call_table)
.long sys_waitid
syscall_table_size=(.-sys_call_table)
......@@ -118,6 +118,8 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
COPY(acch);
COPY(accl);
COPY(dummy_acc1h);
COPY(dummy_acc1l);
#else
#error unknown isa configuration
#endif
......@@ -203,6 +205,8 @@ setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
COPY(acch);
COPY(accl);
COPY(dummy_acc1h);
COPY(dummy_acc1l);
#else
#error unknown isa configuration
#endif
......
......@@ -109,6 +109,9 @@
push r13
mvfachi r13
push r13
ldi r13, #0
push r13 ; dummy push acc1h
push r13 ; dummy push acc1l
#else
#error unknown isa configuration
#endif
......@@ -156,6 +159,8 @@
pop r13
mvtaclo r13, a1
#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
pop r13 ; dummy pop acc1h
pop r13 ; dummy pop acc1l
pop r13
mvtachi r13
pop r13
......
......@@ -43,6 +43,14 @@
#define PT_ACC1L 18
#define PT_ACCH PT_ACC0H
#define PT_ACCL PT_ACC0L
#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
#define PT_ACCH 15
#define PT_ACCL 16
#define PT_DUMMY_ACC1H 17
#define PT_DUMMY_ACC1L 18
#else
#error unknown isa conifiguration
#endif
#define PT_PSW 19
#define PT_BPC 20
#define PT_BBPSW 21
......@@ -52,21 +60,6 @@
#define PT_LR 25
#define PT_SPI 26
#define PT_ORIGR0 27
#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
#define PT_ACCH 15
#define PT_ACCL 16
#define PT_PSW 17
#define PT_BPC 18
#define PT_BBPSW 19
#define PT_BBPC 20
#define PT_SPU 21
#define PT_FP 22
#define PT_LR 23
#define PT_SPI 24
#define PT_ORIGR0 25
#else
#error unknown isa conifiguration
#endif
/* virtual pt_reg entry for gdb */
#define PT_PC 30
......@@ -121,6 +114,8 @@ struct pt_regs {
#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
unsigned long acch;
unsigned long accl;
unsigned long dummy_acc1h;
unsigned long dummy_acc1l;
#else
#error unknown isa configuration
#endif
......
......@@ -32,6 +32,8 @@ struct sigcontext {
#elif defined(CONFIG_ISA_M32R2) || defined(CONFIG_ISA_M32R)
unsigned long sc_acch;
unsigned long sc_accl;
unsigned long sc_dummy_acc1h;
unsigned long sc_dummy_acc1l;
#else
#error unknown isa configuration
#endif
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册