提交 8e664fb3 编写于 作者: J Johannes Berg 提交者: John W. Linville

mac80211: split up and insert custom IEs correctly

Currently, we insert all user-specified IEs before the HT
IE for association, and after the HT IE for probe requests.
For association, that's correct only if the user-specified
IEs are RSN only, incorrect in all other cases including
WPA. Change this to split apart the user-specified IEs in
two places for association: before the HT IE (e.g. RSN),
after the HT IE (generally empty right now I think?) and
after WMM (all other vendor-specific IEs). For probes,
split the IEs in different places to be correct according
to the spec.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 77c8144a
......@@ -1085,12 +1085,12 @@ enum ieee80211_eid {
WLAN_EID_TIM = 5,
WLAN_EID_IBSS_PARAMS = 6,
WLAN_EID_CHALLENGE = 16,
/* 802.11d */
WLAN_EID_COUNTRY = 7,
WLAN_EID_HP_PARAMS = 8,
WLAN_EID_HP_TABLE = 9,
WLAN_EID_REQUEST = 10,
/* 802.11e */
WLAN_EID_QBSS_LOAD = 11,
WLAN_EID_EDCA_PARAM_SET = 12,
WLAN_EID_TSPEC = 13,
......@@ -1113,7 +1113,7 @@ enum ieee80211_eid {
WLAN_EID_PREP = 69,
WLAN_EID_PERR = 70,
WLAN_EID_RANN = 49, /* compatible with FreeBSD */
/* 802.11h */
WLAN_EID_PWR_CONSTRAINT = 32,
WLAN_EID_PWR_CAPABILITY = 33,
WLAN_EID_TPC_REQUEST = 34,
......@@ -1124,20 +1124,41 @@ enum ieee80211_eid {
WLAN_EID_MEASURE_REPORT = 39,
WLAN_EID_QUIET = 40,
WLAN_EID_IBSS_DFS = 41,
/* 802.11g */
WLAN_EID_ERP_INFO = 42,
WLAN_EID_EXT_SUPP_RATES = 50,
/* 802.11n */
WLAN_EID_HT_CAPABILITY = 45,
WLAN_EID_HT_INFORMATION = 61,
/* 802.11i */
WLAN_EID_RSN = 48,
WLAN_EID_TIMEOUT_INTERVAL = 56,
WLAN_EID_MMIE = 76 /* 802.11w */,
WLAN_EID_MMIE = 76,
WLAN_EID_WPA = 221,
WLAN_EID_GENERIC = 221,
WLAN_EID_VENDOR_SPECIFIC = 221,
WLAN_EID_QOS_PARAMETER = 222
WLAN_EID_QOS_PARAMETER = 222,
WLAN_EID_AP_CHAN_REPORT = 51,
WLAN_EID_NEIGHBOR_REPORT = 52,
WLAN_EID_RCPI = 53,
WLAN_EID_BSS_AVG_ACCESS_DELAY = 63,
WLAN_EID_ANTENNA_INFO = 64,
WLAN_EID_RSNI = 65,
WLAN_EID_MEASUREMENT_PILOT_TX_INFO = 66,
WLAN_EID_BSS_AVAILABLE_CAPACITY = 67,
WLAN_EID_BSS_AC_ACCESS_DELAY = 68,
WLAN_EID_RRM_ENABLED_CAPABILITIES = 70,
WLAN_EID_MULTIPLE_BSSID = 71,
WLAN_EID_MOBILITY_DOMAIN = 54,
WLAN_EID_FAST_BSS_TRANSITION = 55,
WLAN_EID_TIMEOUT_INTERVAL = 56,
WLAN_EID_RIC_DATA = 57,
WLAN_EID_RIC_DESCRIPTOR = 75,
WLAN_EID_DSE_REGISTERED_LOCATION = 58,
WLAN_EID_SUPPORTED_REGULATORY_CLASSES = 59,
WLAN_EID_EXT_CHANSWITCH_ANN = 60,
};
/* Action category code */
......
......@@ -1148,6 +1148,10 @@ int __ieee80211_request_smps(struct ieee80211_sub_if_data *sdata,
void ieee80211_recalc_smps(struct ieee80211_local *local,
struct ieee80211_sub_if_data *forsdata);
size_t ieee80211_ie_split(const u8 *ies, size_t ielen,
const u8 *ids, int n_ids, size_t offset);
size_t ieee80211_ie_split_vendor(const u8 *ies, size_t ielen, size_t offset);
/* internal work items */
void ieee80211_work_init(struct ieee80211_local *local);
void ieee80211_add_work(struct ieee80211_work *wk);
......
......@@ -881,30 +881,66 @@ int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
enum ieee80211_band band)
{
struct ieee80211_supported_band *sband;
u8 *pos, *supp_rates_len, *esupp_rates_len = NULL;
int i;
u8 *pos;
size_t offset = 0, noffset;
int supp_rates_len, i;
sband = local->hw.wiphy->bands[band];
pos = buffer;
supp_rates_len = min_t(int, sband->n_bitrates, 8);
*pos++ = WLAN_EID_SUPP_RATES;
supp_rates_len = pos;
*pos++ = 0;
for (i = 0; i < sband->n_bitrates; i++) {
struct ieee80211_rate *rate = &sband->bitrates[i];
if (esupp_rates_len) {
*esupp_rates_len += 1;
} else if (*supp_rates_len == 8) {
*pos++ = WLAN_EID_EXT_SUPP_RATES;
esupp_rates_len = pos;
*pos++ = 1;
} else
*supp_rates_len += 1;
*pos++ = supp_rates_len;
*pos++ = rate->bitrate / 5;
for (i = 0; i < supp_rates_len; i++) {
int rate = sband->bitrates[i].bitrate;
*pos++ = (u8) (rate / 5);
}
/* insert "request information" if in custom IEs */
if (ie && ie_len) {
static const u8 before_extrates[] = {
WLAN_EID_SSID,
WLAN_EID_SUPP_RATES,
WLAN_EID_REQUEST,
};
noffset = ieee80211_ie_split(ie, ie_len,
before_extrates,
ARRAY_SIZE(before_extrates),
offset);
memcpy(pos, ie + offset, noffset - offset);
pos += noffset - offset;
offset = noffset;
}
if (sband->n_bitrates > i) {
*pos++ = WLAN_EID_EXT_SUPP_RATES;
*pos++ = sband->n_bitrates - i;
for (; i < sband->n_bitrates; i++) {
int rate = sband->bitrates[i].bitrate;
*pos++ = (u8) (rate / 5);
}
}
/* insert custom IEs that go before HT */
if (ie && ie_len) {
static const u8 before_ht[] = {
WLAN_EID_SSID,
WLAN_EID_SUPP_RATES,
WLAN_EID_REQUEST,
WLAN_EID_EXT_SUPP_RATES,
WLAN_EID_DS_PARAMS,
WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
};
noffset = ieee80211_ie_split(ie, ie_len,
before_ht, ARRAY_SIZE(before_ht),
offset);
memcpy(pos, ie + offset, noffset - offset);
pos += noffset - offset;
offset = noffset;
}
if (sband->ht_cap.ht_supported) {
......@@ -936,9 +972,11 @@ int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer,
* that calculates local->scan_ies_len.
*/
if (ie) {
memcpy(pos, ie, ie_len);
pos += ie_len;
/* add any remaining custom IEs */
if (ie && ie_len) {
noffset = ie_len;
memcpy(pos, ie + offset, noffset - offset);
pos += noffset - offset;
}
return pos - buffer;
......@@ -1252,3 +1290,59 @@ void ieee80211_recalc_smps(struct ieee80211_local *local,
/* changed flag is auto-detected for this */
ieee80211_hw_config(local, 0);
}
static bool ieee80211_id_in_list(const u8 *ids, int n_ids, u8 id)
{
int i;
for (i = 0; i < n_ids; i++)
if (ids[i] == id)
return true;
return false;
}
/**
* ieee80211_ie_split - split an IE buffer according to ordering
*
* @ies: the IE buffer
* @ielen: the length of the IE buffer
* @ids: an array with element IDs that are allowed before
* the split
* @n_ids: the size of the element ID array
* @offset: offset where to start splitting in the buffer
*
* This function splits an IE buffer by updating the @offset
* variable to point to the location where the buffer should be
* split.
*
* It assumes that the given IE buffer is well-formed, this
* has to be guaranteed by the caller!
*
* It also assumes that the IEs in the buffer are ordered
* correctly, if not the result of using this function will not
* be ordered correctly either, i.e. it does no reordering.
*
* The function returns the offset where the next part of the
* buffer starts, which may be @ielen if the entire (remainder)
* of the buffer should be used.
*/
size_t ieee80211_ie_split(const u8 *ies, size_t ielen,
const u8 *ids, int n_ids, size_t offset)
{
size_t pos = offset;
while (pos < ielen && ieee80211_id_in_list(ids, n_ids, ies[pos]))
pos += 2 + ies[pos + 1];
return pos;
}
size_t ieee80211_ie_split_vendor(const u8 *ies, size_t ielen, size_t offset)
{
size_t pos = offset;
while (pos < ielen && ies[pos] != WLAN_EID_VENDOR_SPECIFIC)
pos += 2 + ies[pos + 1];
return pos;
}
......@@ -204,6 +204,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt;
u8 *pos;
const u8 *ies;
size_t offset = 0, noffset;
int i, len, count, rates_len, supp_rates_len;
u16 capab;
struct ieee80211_supported_band *sband;
......@@ -337,14 +338,26 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
}
}
/*
* XXX: These IEs could contain (vendor-specified)
* IEs that belong after HT -- the buffer may
* need to be split up.
*/
/* if present, add any custom IEs that go before HT */
if (wk->ie_len && wk->ie) {
pos = skb_put(skb, wk->ie_len);
memcpy(pos, wk->ie, wk->ie_len);
static const u8 before_ht[] = {
WLAN_EID_SSID,
WLAN_EID_SUPP_RATES,
WLAN_EID_EXT_SUPP_RATES,
WLAN_EID_PWR_CAPABILITY,
WLAN_EID_SUPPORTED_CHANNELS,
WLAN_EID_RSN,
WLAN_EID_QOS_CAPA,
WLAN_EID_RRM_ENABLED_CAPABILITIES,
WLAN_EID_MOBILITY_DOMAIN,
WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
};
noffset = ieee80211_ie_split(wk->ie, wk->ie_len,
before_ht, ARRAY_SIZE(before_ht),
offset);
pos = skb_put(skb, noffset - offset);
memcpy(pos, wk->ie + offset, noffset - offset);
offset = noffset;
}
if (wk->assoc.use_11n && wk->assoc.wmm_used &&
......@@ -352,6 +365,15 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
ieee80211_add_ht_ie(skb, wk->assoc.ht_information_ie,
sband, wk->chan, wk->assoc.smps);
/* if present, add any custom non-vendor IEs that go after HT */
if (wk->ie_len && wk->ie) {
noffset = ieee80211_ie_split_vendor(wk->ie, wk->ie_len,
offset);
pos = skb_put(skb, noffset - offset);
memcpy(pos, wk->ie + offset, noffset - offset);
offset = noffset;
}
if (wk->assoc.wmm_used && local->hw.queues >= 4) {
pos = skb_put(skb, 9);
*pos++ = WLAN_EID_VENDOR_SPECIFIC;
......@@ -365,6 +387,13 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata,
*pos++ = 0;
}
/* add any remaining custom (i.e. vendor specific here) IEs */
if (wk->ie_len && wk->ie) {
noffset = wk->ie_len;
pos = skb_put(skb, noffset - offset);
memcpy(pos, wk->ie + offset, noffset - offset);
}
IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
ieee80211_tx_skb(sdata, skb);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册