ixgbe: check for WoL support in single function

This patch consolidates the case logic for checking whether a device supports
WoL into a single place. Previously ethtool and probe used similar logic that
was copied and maintained separately. This patch encapsulates the core logic
into a function so that a user only has to update one place.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NStephen Ko <stephen.s.ko@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/ixgbe/ixgbe.h

@@ -600,6 +600,8 @@ extern void ixgbe_disable_rx_queue(struct ixgbe_adapter *adapter,
 				   struct ixgbe_ring *);
 extern void ixgbe_update_stats(struct ixgbe_adapter *adapter);
 extern int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter);
+extern int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id,
+			       u16 subdevice_id);
 extern void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter);
 extern netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *,
 					 struct ixgbe_adapter *,

drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c

@@ -1969,53 +1969,12 @@ static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter,
                                struct ethtool_wolinfo *wol)
 {
 	struct ixgbe_hw *hw = &adapter->hw;
-	int retval = 1;
-	u16 wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK;
-
-	/* WOL not supported except for the following */
-	switch(hw->device_id) {
-	case IXGBE_DEV_ID_82599_SFP:
-		/* Only these subdevices could supports WOL */
-		switch (hw->subsystem_device_id) {
-		case IXGBE_SUBDEV_ID_82599_560FLR:
-			/* only support first port */
-			if (hw->bus.func != 0) {
-				wol->supported = 0;
-				break;
-			}
-		case IXGBE_SUBDEV_ID_82599_SFP:
-			retval = 0;
-			break;
-		default:
-			wol->supported = 0;
-			break;
-		}
-		break;
-	case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
-		/* All except this subdevice support WOL */
-		if (hw->subsystem_device_id ==
-		    IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ) {
-			wol->supported = 0;
-			break;
-		}
-		retval = 0;
-		break;
-	case IXGBE_DEV_ID_82599_KX4:
-		retval = 0;
-		break;
-	case IXGBE_DEV_ID_X540T:
-		/* check eeprom to see if enabled wol */
-		if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) ||
-		    ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) &&
-		     (hw->bus.func == 0))) {
-			retval = 0;
-			break;
-		}
+	int retval = 0;
 
-		/* All others not supported */
-		wol->supported = 0;
-		break;
-	default:
+	/* WOL not supported for all devices */
+	if (!ixgbe_wol_supported(adapter, hw->device_id,
+				 hw->subsystem_device_id)) {
+		retval = 1;
 		wol->supported = 0;
 	}
 

drivers/net/ethernet/intel/ixgbe/ixgbe_main.c

@@ -6598,7 +6598,7 @@ static netdev_features_t ixgbe_fix_features(struct net_device *netdev,
 	/* Turn off LRO if not RSC capable */
 	if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE))
 		features &= ~NETIF_F_LRO;
-	
+
 
 	return features;
 }
@@ -6785,6 +6785,57 @@ static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
 #endif /* CONFIG_PCI_IOV */
 }
 
+/**
+ * ixgbe_wol_supported - Check whether device supports WoL
+ * @hw: hw specific details
+ * @device_id: the device ID
+ * @subdev_id: the subsystem device ID
+ *
+ * This function is used by probe and ethtool to determine
+ * which devices have WoL support
+ *
+ **/
+int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id,
+			u16 subdevice_id)
+{
+	struct ixgbe_hw *hw = &adapter->hw;
+	u16 wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK;
+	int is_wol_supported = 0;
+
+	switch (device_id) {
+	case IXGBE_DEV_ID_82599_SFP:
+		/* Only these subdevices could supports WOL */
+		switch (subdevice_id) {
+		case IXGBE_SUBDEV_ID_82599_560FLR:
+			/* only support first port */
+			if (hw->bus.func != 0)
+				break;
+		case IXGBE_SUBDEV_ID_82599_SFP:
+			is_wol_supported = 1;
+			break;
+		}
+		break;
+	case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
+		/* All except this subdevice support WOL */
+		if (subdevice_id != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ)
+			is_wol_supported = 1;
+		break;
+	case IXGBE_DEV_ID_82599_KX4:
+		is_wol_supported = 1;
+		break;
+	case IXGBE_DEV_ID_X540T:
+		/* check eeprom to see if enabled wol */
+		if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) ||
+		    ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) &&
+		     (hw->bus.func == 0))) {
+			is_wol_supported = 1;
+		}
+		break;
+	}
+
+	return is_wol_supported;
+}
+
 /**
  * ixgbe_probe - Device Initialization Routine
  * @pdev: PCI device information struct
@@ -6811,7 +6862,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	u16 device_caps;
 #endif
 	u32 eec;
-	u16 wol_cap;
 
 	/* Catch broken hardware that put the wrong VF device ID in
 	 * the PCIe SR-IOV capability.
@@ -7075,40 +7125,12 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 		netdev->features &= ~NETIF_F_RXHASH;
 	}
 
-	/* WOL not supported for all but the following */
+	/* WOL not supported for all devices */
 	adapter->wol = 0;
-	switch (pdev->device) {
-	case IXGBE_DEV_ID_82599_SFP:
-		/* Only these subdevice supports WOL */
-		switch (pdev->subsystem_device) {
-		case IXGBE_SUBDEV_ID_82599_560FLR:
-			/* only support first port */
-			if (hw->bus.func != 0)
-				break;
-		case IXGBE_SUBDEV_ID_82599_SFP:
-			adapter->wol = IXGBE_WUFC_MAG;
-			break;
-		}
-		break;
-	case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
-		/* All except this subdevice support WOL */
-		if (pdev->subsystem_device != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ)
-			adapter->wol = IXGBE_WUFC_MAG;
-		break;
-	case IXGBE_DEV_ID_82599_KX4:
+	hw->eeprom.ops.read(hw, 0x2c, &adapter->eeprom_cap);
+	if (ixgbe_wol_supported(adapter, pdev->device, pdev->subsystem_device))
 		adapter->wol = IXGBE_WUFC_MAG;
-		break;
-	case IXGBE_DEV_ID_X540T:
-		/* Check eeprom to see if it is enabled */
-		hw->eeprom.ops.read(hw, 0x2c, &adapter->eeprom_cap);
-		wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK;
 
-		if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) ||
-		    ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) &&
-		     (hw->bus.func == 0)))
-			adapter->wol = IXGBE_WUFC_MAG;
-		break;
-	}
 	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
 
 	/* save off EEPROM version number */