提交 8df158ac 编写于 作者: J Jeff Kirsher

toshiba: Move the Toshiba drivers

Move the Toshiba ethernet drivers into drivers/net/ethernet/toshiba
and make the necessary Kconfig and Makefile changes.

CC: Geoff Levand <geoff@infradead.org>
CC: Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
CC: Ishizaki Kou <kou.ishizaki@toshiba.co.jp>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
上级 bcc9736c
......@@ -5127,7 +5127,7 @@ M: Geoff Levand <geoff@infradead.org>
L: netdev@vger.kernel.org
L: cbe-oss-dev@lists.ozlabs.org
S: Maintained
F: drivers/net/ps3_gelic_net.*
F: drivers/net/ethernet/toshiba/ps3_gelic_net.*
PS3 PLATFORM SUPPORT
M: Geoff Levand <geoff@infradead.org>
......@@ -6084,7 +6084,7 @@ M: Jens Osterkamp <jens@de.ibm.com>
L: netdev@vger.kernel.org
S: Supported
F: Documentation/networking/spider_net.txt
F: drivers/net/spider_net*
F: drivers/net/ethernet/toshiba/spider_net*
SPU FILE SYSTEM
M: Jeremy Kerr <jk@ozlabs.org>
......
......@@ -478,11 +478,6 @@ config FORCEDETH
To compile this driver as a module, choose M here. The module
will be called forcedeth.
config TC35815
tristate "TOSHIBA TC35815 Ethernet support"
depends on NET_PCI && PCI && MIPS
select PHYLIB
config FEALNX
tristate "Myson MTD-8xx PCI Ethernet support"
depends on NET_PCI && PCI
......@@ -658,15 +653,6 @@ config SIS190
To compile this driver as a module, choose M here: the module
will be called sis190. This is recommended.
config SPIDER_NET
tristate "Spider Gigabit Ethernet driver"
depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
select FW_LOADER
select SUNGEM_PHY
help
This driver supports the Gigabit Ethernet chips present on the
Cell Processor-Based Blades from IBM.
config TSI108_ETH
tristate "Tundra TSI108 gigabit Ethernet support"
depends on TSI108_BRIDGE
......@@ -675,29 +661,6 @@ config TSI108_ETH
To compile this driver as a module, choose M here: the module
will be called tsi108_eth.
config GELIC_NET
tristate "PS3 Gigabit Ethernet driver"
depends on PPC_PS3
select PS3_SYS_MANAGER
help
This driver supports the network device on the PS3 game
console. This driver has built-in support for Ethernet.
To compile this driver as a module, choose M here: the
module will be called ps3_gelic.
config GELIC_WIRELESS
bool "PS3 Wireless support"
depends on WLAN
depends on GELIC_NET
select WIRELESS_EXT
help
This option adds the support for the wireless feature of PS3.
If you have the wireless-less model of PS3 or have no plan to
use wireless feature, disabling this option saves memory. As
the driver automatically distinguishes the models, you can
safely enable this option even if you have a wireless-less model.
config XILINX_LL_TEMAC
tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
depends on PPC || MICROBLAZE
......
......@@ -29,12 +29,6 @@ obj-$(CONFIG_SIS900) += sis900.o
obj-$(CONFIG_R6040) += r6040.o
obj-$(CONFIG_YELLOWFIN) += yellowfin.o
obj-$(CONFIG_FEALNX) += fealnx.o
spidernet-y += spider_net.o spider_net_ethtool.o
obj-$(CONFIG_SPIDER_NET) += spidernet.o
obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
gelic_wireless-$(CONFIG_GELIC_WIRELESS) += ps3_gelic_wireless.o
ps3_gelic-objs += ps3_gelic_net.o $(gelic_wireless-y)
obj-$(CONFIG_TC35815) += tc35815.o
obj-$(CONFIG_SKFP) += skfp/
obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
obj-$(CONFIG_RIONET) += rionet.o
......
......@@ -48,6 +48,7 @@ source "drivers/net/ethernet/smsc/Kconfig"
source "drivers/net/ethernet/stmicro/Kconfig"
source "drivers/net/ethernet/sun/Kconfig"
source "drivers/net/ethernet/tehuti/Kconfig"
source "drivers/net/ethernet/toshiba/Kconfig"
source "drivers/net/ethernet/via/Kconfig"
endif # ETHERNET
......@@ -39,4 +39,5 @@ obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
obj-$(CONFIG_NET_VENDOR_SUN) += sun/
obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/
obj-$(CONFIG_NET_VENDOR_TOSHIBA) += toshiba/
obj-$(CONFIG_NET_VENDOR_VIA) += via/
#
# Toshiba network device configuration
#
config NET_VENDOR_TOSHIBA
bool "Toshiba devices"
depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB) || PPC_PS3
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about Toshiba cards. If you say Y, you will be asked
for your specific card in the following questions.
if NET_VENDOR_TOSHIBA
config GELIC_NET
tristate "PS3 Gigabit Ethernet driver"
depends on PPC_PS3
select PS3_SYS_MANAGER
---help---
This driver supports the network device on the PS3 game
console. This driver has built-in support for Ethernet.
To compile this driver as a module, choose M here: the
module will be called ps3_gelic.
config GELIC_WIRELESS
bool "PS3 Wireless support"
depends on GELIC_NET && WLAN
select WIRELESS_EXT
---help---
This option adds the support for the wireless feature of PS3.
If you have the wireless-less model of PS3 or have no plan to
use wireless feature, disabling this option saves memory. As
the driver automatically distinguishes the models, you can
safely enable this option even if you have a wireless-less model.
config SPIDER_NET
tristate "Spider Gigabit Ethernet driver"
depends on PCI && (PPC_IBM_CELL_BLADE || PPC_CELLEB)
select FW_LOADER
select SUNGEM_PHY
---help---
This driver supports the Gigabit Ethernet chips present on the
Cell Processor-Based Blades from IBM.
config TC35815
tristate "TOSHIBA TC35815 Ethernet support"
depends on PCI && MIPS
select PHYLIB
endif # NET_VENDOR_TOSHIBA
#
# Makefile for the Toshiba network device drivers.
#
obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
gelic_wireless-$(CONFIG_GELIC_WIRELESS) += ps3_gelic_wireless.o
ps3_gelic-objs += ps3_gelic_net.o $(gelic_wireless-y)
spidernet-y += spider_net.o spider_net_ethtool.o
obj-$(CONFIG_SPIDER_NET) += spidernet.o ethernet/sun/sungem_phy.o
obj-$(CONFIG_TC35815) += tc35815.o
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册