Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
1 年多 前同步成功

通知 160
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 8da5bb7a 编写于 作者: P Pekka Enberg 提交者： David S. Miller
浏览文件
操作

ipg: fix checkpatch reported errors 

Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Francois Romieu <romieu@fr.zoreil.com>
Cc: Sorbica Shieh <sorbica@icplus.com.tw>
Cc: Jesse Huang <jesse@icplus.com.tw>
上级 9893ba16
隐藏空白更改
内联 并排
Showing with 41 addition and 39 deletion
drivers/net/ipg.c
浏览文件 @ 8da5bb7a
......@@ -34,9 +34,9 @@
IPG_AC_DMA | IPG_AC_FIFO | IPG_AC_NETWORK | IPG_AC_HOST | \
IPG_AC_AUTO_INIT)
#define ipg_w32(val32,reg) iowrite32((val32), ioaddr + (reg))
#define ipg_w16(val16,reg) iowrite16((val16), ioaddr + (reg))
#define ipg_w8(val8,reg) iowrite8((val8), ioaddr + (reg))
#define ipg_w32(val32, reg) iowrite32((val32), ioaddr + (reg))
#define ipg_w16(val16, reg) iowrite16((val16), ioaddr + (reg))
#define ipg_w8(val8, reg) iowrite8((val8), ioaddr + (reg))
#define ipg_r32(reg) ioread32(ioaddr + (reg))
#define ipg_r16(reg) ioread16(ioaddr + (reg))
......@@ -54,20 +54,22 @@ MODULE_AUTHOR("IC Plus Corp. 2003");
MODULE_DESCRIPTION("IC Plus IP1000 Gigabit Ethernet Adapter Linux Driver");
MODULE_LICENSE("GPL");
//variable record -- index by leading revision/length
//Revision/Length(=N*4), Address1, Data1, Address2, Data2,...,AddressN,DataN
/*
* Variable record -- index by leading revision/length
* Revision/Length(=N*4), Address1, Data1, Address2, Data2,...,AddressN,DataN
*/
static unsigned short DefaultPhyParam[] = {
// 11/12/03 IP1000A v1-3 rev=0x40
/* 11/12/03 IP1000A v1-3 rev=0x40 */
/*--------------------------------------------------------------------------
(0x4000|(15*4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 22, 0x85bd, 24, 0xfff2,
27, 0x0c10, 28, 0x0c10, 29, 0x2c10, 31, 0x0003, 23, 0x92f6,
31, 0x0000, 23, 0x003d, 30, 0x00de, 20, 0x20e7, 9, 0x0700,
--------------------------------------------------------------------------*/
// 12/17/03 IP1000A v1-4 rev=0x40
/* 12/17/03 IP1000A v1-4 rev=0x40 */
(0x4000 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
0x0000,
30, 0x005e, 9, 0x0700,
// 01/09/04 IP1000A v1-5 rev=0x41
/* 01/09/04 IP1000A v1-5 rev=0x41 */
(0x4100 | (07 * 4)), 31, 0x0001, 27, 0x01e0, 31, 0x0002, 27, 0xeb8e, 31,
0x0000,
30, 0x005e, 9, 0x0700,
......@@ -187,7 +189,7 @@ static void send_end(void __iomem *ioaddr, u8 phyctrlpolarity)
phyctrlpolarity) & IPG_PC_RSVD_MASK, PHY_CTRL);
}
static u16 read_phy_bit(void __iomem * ioaddr, u8 phyctrlpolarity)
static u16 read_phy_bit(void __iomem *ioaddr, u8 phyctrlpolarity)
{
u16 bit_data;
......@@ -204,7 +206,7 @@ static u16 read_phy_bit(void __iomem * ioaddr, u8 phyctrlpolarity)
* Read a register from the Physical Layer device located
* on the IPG NIC, using the IPG PHYCTRL register.
*/
static int mdio_read(struct net_device * dev, int phy_id, int phy_reg)
static int mdio_read(struct net_device *dev, int phy_id, int phy_reg)
{
void __iomem *ioaddr = ipg_ioaddr(dev);
/*
......@@ -548,7 +550,7 @@ static int ipg_config_autoneg(struct net_device *dev)
printk("\n");
} else {
/* Configure IPG for half duplex operation. */
printk(KERN_INFO "%s: setting half duplex, "
printk(KERN_INFO "%s: setting half duplex, "
"no TX flow control, no RX flow control.\n", dev->name);
mac_ctrl_val &= ~IPG_MC_DUPLEX_SELECT_FD &
......@@ -1080,12 +1082,12 @@ static int ipg_nic_rxrestore(struct net_device *dev)
#ifdef JUMBO_FRAME
/* use jumboindex and jumbosize to control jumbo frame status
initial status is jumboindex=-1 and jumbosize=0
1. jumboindex = -1 and jumbosize=0 : previous jumbo frame has been done.
2. jumboindex != -1 and jumbosize != 0 : jumbo frame is not over size and receiving
3. jumboindex = -1 and jumbosize != 0 : jumbo frame is over size, already dump
previous receiving and need to continue dumping the current one
*/
* initial status is jumboindex=-1 and jumbosize=0
* 1. jumboindex = -1 and jumbosize=0 : previous jumbo frame has been done.
* 2. jumboindex != -1 and jumbosize != 0 : jumbo frame is not over size and receiving
* 3. jumboindex = -1 and jumbosize != 0 : jumbo frame is over size, already dump
* previous receiving and need to continue dumping the current one
*/
enum {
NORMAL_PACKET,
ERROR_PACKET
......@@ -1200,7 +1202,7 @@ static void ipg_nic_rx_with_start_and_end(struct net_device *dev,
jumbo->skb = NULL;
}
// 1: found error, 0 no error
/* 1: found error, 0 no error */
if (ipg_nic_rx_check_error(dev) != NORMAL_PACKET)
return;
......@@ -1208,7 +1210,7 @@ static void ipg_nic_rx_with_start_and_end(struct net_device *dev,
if (!skb)
return;
// accept this frame and send to upper layer
/* accept this frame and send to upper layer */
framelen = le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFRAMELEN;
if (framelen > IPG_RXFRAG_SIZE)
framelen = IPG_RXFRAG_SIZE;
......@@ -1229,11 +1231,11 @@ static void ipg_nic_rx_with_start(struct net_device *dev,
struct pci_dev *pdev = sp->pdev;
struct sk_buff *skb;
// 1: found error, 0 no error
/* 1: found error, 0 no error */
if (ipg_nic_rx_check_error(dev) != NORMAL_PACKET)
return;
// accept this frame and send to upper layer
/* accept this frame and send to upper layer */
skb = sp->rx_buff[entry];
if (!skb)
return;
......@@ -1260,7 +1262,7 @@ static void ipg_nic_rx_with_end(struct net_device *dev,
{
struct ipg_jumbo *jumbo = &sp->jumbo;
//1: found error, 0 no error
/* 1: found error, 0 no error */
if (ipg_nic_rx_check_error(dev) == NORMAL_PACKET) {
struct sk_buff *skb = sp->rx_buff[entry];
......@@ -1311,7 +1313,7 @@ static void ipg_nic_rx_no_start_no_end(struct net_device *dev,
{
struct ipg_jumbo *jumbo = &sp->jumbo;
//1: found error, 0 no error
/* 1: found error, 0 no error */
if (ipg_nic_rx_check_error(dev) == NORMAL_PACKET) {
struct sk_buff *skb = sp->rx_buff[entry];
......
drivers/net/ipg.h
浏览文件 @ 8da5bb7a
......@@ -51,7 +51,7 @@
/* I/O register offsets. */
enum ipg_regs {
DMA_CTRL = 0x00,
RX_DMA_STATUS = 0x08, // Unused + reserved
RX_DMA_STATUS = 0x08, /* Unused + reserved */
TFD_LIST_PTR_0 = 0x10,
TFD_LIST_PTR_1 = 0x14,
TX_DMA_BURST_THRESH = 0x18,
......@@ -64,21 +64,21 @@ enum ipg_regs {
RX_DMA_POLL_PERIOD = 0x26,
DEBUG_CTRL = 0x2c,
ASIC_CTRL = 0x30,
FIFO_CTRL = 0x38, // Unused
FIFO_CTRL = 0x38, /* Unused */
FLOW_OFF_THRESH = 0x3c,
FLOW_ON_THRESH = 0x3e,
EEPROM_DATA = 0x48,
EEPROM_CTRL = 0x4a,
EXPROM_ADDR = 0x4c, // Unused
EXPROM_DATA = 0x50, // Unused
WAKE_EVENT = 0x51, // Unused
COUNTDOWN = 0x54, // Unused
EXPROM_ADDR = 0x4c, /* Unused */
EXPROM_DATA = 0x50, /* Unused */
WAKE_EVENT = 0x51, /* Unused */
COUNTDOWN = 0x54, /* Unused */
INT_STATUS_ACK = 0x5a,
INT_ENABLE = 0x5c,
INT_STATUS = 0x5e, // Unused
INT_STATUS = 0x5e, /* Unused */
TX_STATUS = 0x60,
MAC_CTRL = 0x6c,
VLAN_TAG = 0x70, // Unused
VLAN_TAG = 0x70, /* Unused */
PHY_SET = 0x75,
PHY_CTRL = 0x76,
STATION_ADDRESS_0 = 0x78,
......@@ -90,11 +90,11 @@ enum ipg_regs {
HASHTABLE_1 = 0x90,
RMON_STATISTICS_MASK = 0x98,
STATISTICS_MASK = 0x9c,
RX_JUMBO_FRAMES = 0xbc, // Unused
TCP_CHECKSUM_ERRORS = 0xc0, // Unused
IP_CHECKSUM_ERRORS = 0xc2, // Unused
UDP_CHECKSUM_ERRORS = 0xc4, // Unused
TX_JUMBO_FRAMES = 0xf4 // Unused
RX_JUMBO_FRAMES = 0xbc, /* Unused */
TCP_CHECKSUM_ERRORS = 0xc0, /* Unused */
IP_CHECKSUM_ERRORS = 0xc2, /* Unused */
UDP_CHECKSUM_ERRORS = 0xc4, /* Unused */
TX_JUMBO_FRAMES = 0xf4 /* Unused */
};
/* Ethernet MIB statistic register offsets. */
......@@ -590,7 +590,7 @@ enum ipg_regs {
* Define larger if expecting jumbo frames.
*/
#ifdef JUMBO_FRAME
//IPG_TXFRAG_SIZE must <= 0x2b00, or TX will crash
/* IPG_TXFRAG_SIZE must <= 0x2b00, or TX will crash */
#define IPG_TXFRAG_SIZE JUMBO_FRAME_SIZE
#endif
......@@ -598,7 +598,7 @@ enum ipg_regs {
* Define larger if expecting jumbo frames.
*/
#ifdef JUMBO_FRAME
//4088=4096-8
/* 4088 = 4096 - 8 */
#define IPG_RXFRAG_SIZE __IPG_RXFRAG_SIZE
#define IPG_RXSUPPORT_SIZE IPG_MAX_RXFRAME_SIZE
#else
......@@ -628,7 +628,7 @@ enum ipg_regs {
/* specify the jumbo frame maximum size
* per unit is 0x600 (the rx_buffer size that one RFD can carry)
*/
#define MAX_JUMBOSIZE 0x8 // max is 12K
#define MAX_JUMBOSIZE 0x8 /* max is 12K */
/* Key register values loaded at driver start up. */
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或