提交 8d2f24ca 编写于 作者: D Daniel Vetter

drm/i915: scramble reset support for DP port CRC on vlv

They've moved the DC balance reset bit around. Again I don't think we
need it, but better safe than sorry and maybe HDMI port CRC will prove
useful for checking infoframes or hdmi audio.

v2: Apply the suggestions from Damien's review.
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
上级 84093603
......@@ -2026,6 +2026,9 @@ static int vlv_pipe_crc_ctl_reg(struct drm_device *dev,
enum intel_pipe_crc_source *source,
uint32_t *val)
{
struct drm_i915_private *dev_priv = dev->dev_private;
bool need_stable_symbols = false;
if (*source == INTEL_PIPE_CRC_SOURCE_AUTO) {
int ret = i9xx_pipe_crc_auto_source(dev, pipe, source);
if (ret)
......@@ -2038,9 +2041,11 @@ static int vlv_pipe_crc_ctl_reg(struct drm_device *dev,
break;
case INTEL_PIPE_CRC_SOURCE_DP_B:
*val = PIPE_CRC_ENABLE | PIPE_CRC_SOURCE_DP_B_VLV;
need_stable_symbols = true;
break;
case INTEL_PIPE_CRC_SOURCE_DP_C:
*val = PIPE_CRC_ENABLE | PIPE_CRC_SOURCE_DP_C_VLV;
need_stable_symbols = true;
break;
case INTEL_PIPE_CRC_SOURCE_NONE:
*val = 0;
......@@ -2049,6 +2054,29 @@ static int vlv_pipe_crc_ctl_reg(struct drm_device *dev,
return -EINVAL;
}
/*
* When the pipe CRC tap point is after the transcoders we need
* to tweak symbol-level features to produce a deterministic series of
* symbols for a given frame. We need to reset those features only once
* a frame (instead of every nth symbol):
* - DC-balance: used to ensure a better clock recovery from the data
* link (SDVO)
* - DisplayPort scrambling: used for EMI reduction
*/
if (need_stable_symbols) {
uint32_t tmp = I915_READ(PORT_DFT2_G4X);
WARN_ON(!IS_G4X(dev));
tmp |= DC_BALANCE_RESET_VLV;
if (pipe == PIPE_A)
tmp |= PIPE_A_SCRAMBLE_RESET;
else
tmp |= PIPE_B_SCRAMBLE_RESET;
I915_WRITE(PORT_DFT2_G4X, tmp);
}
return 0;
}
......@@ -2128,6 +2156,22 @@ static int i9xx_pipe_crc_ctl_reg(struct drm_device *dev,
return 0;
}
static void vlv_undo_pipe_scramble_reset(struct drm_device *dev,
enum pipe pipe)
{
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t tmp = I915_READ(PORT_DFT2_G4X);
if (pipe == PIPE_A)
tmp &= ~PIPE_A_SCRAMBLE_RESET;
else
tmp &= ~PIPE_B_SCRAMBLE_RESET;
if (!(tmp & PIPE_SCRAMBLE_RESET_MASK))
tmp &= ~DC_BALANCE_RESET_VLV;
I915_WRITE(PORT_DFT2_G4X, tmp);
}
static void g4x_undo_pipe_scramble_reset(struct drm_device *dev,
enum pipe pipe)
{
......@@ -2267,6 +2311,8 @@ static int pipe_crc_set_source(struct drm_device *dev, enum pipe pipe,
if (IS_G4X(dev))
g4x_undo_pipe_scramble_reset(dev, pipe);
else if (IS_VALLEYVIEW(dev))
vlv_undo_pipe_scramble_reset(dev, pipe);
}
return 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册