提交 8c5e7a5f 编写于 作者: I Ivo van Doorn 提交者: John W. Linville

rt2x00: Gather channel information in structure

Channel information which is read from EEPROM should
be read into an array containing per-channel information.
This removes the requirement of multiple arrays and makes
the channel handling a bit cleaner and easier to expand.
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 906c110f
......@@ -1404,7 +1404,7 @@ static int rt2400pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
* RF value list for RF2420 & RF2421
* Supports: 2.4 GHz
*/
static const struct rf_channel rf_vals_bg[] = {
static const struct rf_channel rf_vals_b[] = {
{ 1, 0x00022058, 0x000c1fda, 0x00000101, 0 },
{ 2, 0x00022058, 0x000c1fee, 0x00000101, 0 },
{ 3, 0x00022058, 0x000c2002, 0x00000101, 0 },
......@@ -1421,10 +1421,11 @@ static const struct rf_channel rf_vals_bg[] = {
{ 14, 0x00022058, 0x000c20fa, 0x00000101, 0 },
};
static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
u8 *txpower;
struct channel_info *info;
char *tx_power;
unsigned int i;
/*
......@@ -1439,24 +1440,29 @@ static void rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
rt2x00_eeprom_addr(rt2x00dev,
EEPROM_MAC_ADDR_0));
/*
* Convert tx_power array in eeprom.
*/
txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
for (i = 0; i < 14; i++)
txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
/*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK;
spec->tx_power_a = NULL;
spec->tx_power_bg = txpower;
spec->tx_power_default = DEFAULT_TXPOWER;
spec->num_channels = ARRAY_SIZE(rf_vals_bg);
spec->channels = rf_vals_bg;
spec->num_channels = ARRAY_SIZE(rf_vals_b);
spec->channels = rf_vals_b;
/*
* Create channel information array
*/
info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
spec->channels_info = info;
tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
for (i = 0; i < 14; i++)
info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
return 0;
}
static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
......@@ -1477,7 +1483,9 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw specifications.
*/
rt2400pci_probe_hw_mode(rt2x00dev);
retval = rt2400pci_probe_hw_mode(rt2x00dev);
if (retval)
return retval;
/*
* This device requires the atim queue and DMA-mapped skbs.
......
......@@ -938,19 +938,13 @@
#define MAX_TXPOWER 62
#define DEFAULT_TXPOWER 39
#define TXPOWER_FROM_DEV(__txpower) \
({ \
((__txpower) > MAX_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER : \
((__txpower) < MIN_TXPOWER) ? DEFAULT_TXPOWER - MIN_TXPOWER : \
(((__txpower) - MAX_TXPOWER) + MIN_TXPOWER); \
})
#define TXPOWER_TO_DEV(__txpower) \
({ \
(__txpower) += MIN_TXPOWER; \
((__txpower) <= MIN_TXPOWER) ? MAX_TXPOWER : \
(((__txpower) >= MAX_TXPOWER) ? MIN_TXPOWER : \
(MAX_TXPOWER - ((__txpower) - MIN_TXPOWER))); \
})
#define __CLAMP_TX(__txpower) \
clamp_t(char, (__txpower), MIN_TXPOWER, MAX_TXPOWER)
#define TXPOWER_FROM_DEV(__txpower) \
((__CLAMP_TX(__txpower) - MAX_TXPOWER) + MIN_TXPOWER)
#define TXPOWER_TO_DEV(__txpower) \
MAX_TXPOWER - (__CLAMP_TX(__txpower) - MIN_TXPOWER)
#endif /* RT2400PCI_H */
......@@ -1721,10 +1721,11 @@ static const struct rf_channel rf_vals_5222[] = {
{ 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
};
static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
u8 *txpower;
struct channel_info *info;
char *tx_power;
unsigned int i;
/*
......@@ -1740,21 +1741,11 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
rt2x00_eeprom_addr(rt2x00dev,
EEPROM_MAC_ADDR_0));
/*
* Convert tx_power array in eeprom.
*/
txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
for (i = 0; i < 14; i++)
txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
/*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
spec->tx_power_a = NULL;
spec->tx_power_bg = txpower;
spec->tx_power_default = DEFAULT_TXPOWER;
if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
......@@ -1776,6 +1767,26 @@ static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->num_channels = ARRAY_SIZE(rf_vals_5222);
spec->channels = rf_vals_5222;
}
/*
* Create channel information array
*/
info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
spec->channels_info = info;
tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
for (i = 0; i < 14; i++)
info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
if (spec->num_channels > 14) {
for (i = 14; i < spec->num_channels; i++)
info[i].tx_power1 = DEFAULT_TXPOWER;
}
return 0;
}
static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
......@@ -1796,7 +1807,9 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw specifications.
*/
rt2500pci_probe_hw_mode(rt2x00dev);
retval = rt2500pci_probe_hw_mode(rt2x00dev);
if (retval)
return retval;
/*
* This device requires the atim queue and DMA-mapped skbs.
......
......@@ -1223,17 +1223,10 @@
#define MAX_TXPOWER 31
#define DEFAULT_TXPOWER 24
#define TXPOWER_FROM_DEV(__txpower) \
({ \
((__txpower) > MAX_TXPOWER) ? \
DEFAULT_TXPOWER : (__txpower); \
})
#define TXPOWER_TO_DEV(__txpower) \
({ \
((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
(((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
(__txpower)); \
})
#define TXPOWER_FROM_DEV(__txpower) \
(((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
#define TXPOWER_TO_DEV(__txpower) \
clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
#endif /* RT2500PCI_H */
......@@ -1665,10 +1665,11 @@ static const struct rf_channel rf_vals_5222[] = {
{ 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
};
static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
u8 *txpower;
struct channel_info *info;
char *tx_power;
unsigned int i;
/*
......@@ -1686,21 +1687,11 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
rt2x00_eeprom_addr(rt2x00dev,
EEPROM_MAC_ADDR_0));
/*
* Convert tx_power array in eeprom.
*/
txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
for (i = 0; i < 14; i++)
txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
/*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
spec->tx_power_a = NULL;
spec->tx_power_bg = txpower;
spec->tx_power_default = DEFAULT_TXPOWER;
if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
......@@ -1722,6 +1713,26 @@ static void rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->num_channels = ARRAY_SIZE(rf_vals_5222);
spec->channels = rf_vals_5222;
}
/*
* Create channel information array
*/
info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
spec->channels_info = info;
tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
for (i = 0; i < 14; i++)
info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
if (spec->num_channels > 14) {
for (i = 14; i < spec->num_channels; i++)
info[i].tx_power1 = DEFAULT_TXPOWER;
}
return 0;
}
static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
......@@ -1742,7 +1753,9 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw specifications.
*/
rt2500usb_probe_hw_mode(rt2x00dev);
retval = rt2500usb_probe_hw_mode(rt2x00dev);
if (retval)
return retval;
/*
* This device requires the atim queue
......
......@@ -825,17 +825,10 @@
#define MAX_TXPOWER 31
#define DEFAULT_TXPOWER 24
#define TXPOWER_FROM_DEV(__txpower) \
({ \
((__txpower) > MAX_TXPOWER) ? \
DEFAULT_TXPOWER : (__txpower); \
})
#define TXPOWER_TO_DEV(__txpower) \
({ \
((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
(((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
(__txpower)); \
})
#define TXPOWER_FROM_DEV(__txpower) \
(((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
#define TXPOWER_TO_DEV(__txpower) \
clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
#endif /* RT2500USB_H */
......@@ -143,6 +143,17 @@ struct rf_channel {
u32 rf4;
};
/*
* Channel information structure
*/
struct channel_info {
unsigned int flags;
#define GEOGRAPHY_ALLOWED 0x00000001
short tx_power1;
short tx_power2;
};
/*
* Antenna setup values.
*/
......@@ -394,10 +405,7 @@ static inline struct rt2x00_intf* vif_to_intf(struct ieee80211_vif *vif)
* @num_channels: Number of supported channels. This is used as array size
* for @tx_power_a, @tx_power_bg and @channels.
* @channels: Device/chipset specific channel values (See &struct rf_channel).
* @tx_power_a: TX power values for all 5.2GHz channels (may be NULL).
* @tx_power_bg: TX power values for all 2.4GHz channels (may be NULL).
* @tx_power_default: Default TX power value to use when either
* @tx_power_a or @tx_power_bg is missing.
* @channels_info: Additional information for channels (See &struct channel_info).
*/
struct hw_mode_spec {
unsigned int supported_bands;
......@@ -410,10 +418,7 @@ struct hw_mode_spec {
unsigned int num_channels;
const struct rf_channel *channels;
const u8 *tx_power_a;
const u8 *tx_power_bg;
u8 tx_power_default;
const struct channel_info *channels_info;
};
/*
......@@ -425,7 +430,9 @@ struct hw_mode_spec {
*/
struct rt2x00lib_conf {
struct ieee80211_conf *conf;
struct rf_channel rf;
struct channel_info channel;
struct antenna_setup ant;
......
......@@ -245,6 +245,10 @@ void rt2x00lib_config(struct rt2x00_dev *rt2x00dev,
memcpy(&libconf.rf,
&rt2x00dev->spec.channels[conf->channel->hw_value],
sizeof(libconf.rf));
memcpy(&libconf.channel,
&rt2x00dev->spec.channels_info[conf->channel->hw_value],
sizeof(libconf.channel));
}
if (flags & CONFIG_UPDATE_ANTENNA) {
......
......@@ -818,7 +818,6 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
struct ieee80211_rate *rates;
unsigned int num_rates;
unsigned int i;
unsigned char tx_power;
num_rates = 0;
if (spec->supported_rates & SUPPORT_RATE_CCK)
......@@ -844,20 +843,9 @@ static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
* Initialize Channel list.
*/
for (i = 0; i < spec->num_channels; i++) {
if (spec->channels[i].channel <= 14) {
if (spec->tx_power_bg)
tx_power = spec->tx_power_bg[i];
else
tx_power = spec->tx_power_default;
} else {
if (spec->tx_power_a)
tx_power = spec->tx_power_a[i];
else
tx_power = spec->tx_power_default;
}
rt2x00lib_channel(&channels[i],
spec->channels[i].channel, tx_power, i);
spec->channels[i].channel,
spec->channels_info[i].tx_power1, i);
}
/*
......@@ -909,6 +897,8 @@ static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
}
kfree(rt2x00dev->spec.channels_info);
}
static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
......
......@@ -2514,10 +2514,11 @@ static const struct rf_channel rf_vals_seq[] = {
{ 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000c0a23 },
};
static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
u8 *txpower;
struct channel_info *info;
char *tx_power;
unsigned int i;
/*
......@@ -2533,21 +2534,11 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
rt2x00_eeprom_addr(rt2x00dev,
EEPROM_MAC_ADDR_0));
/*
* Convert tx_power array in eeprom.
*/
txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
for (i = 0; i < 14; i++)
txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
/*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
spec->tx_power_a = NULL;
spec->tx_power_bg = txpower;
spec->tx_power_default = DEFAULT_TXPOWER;
if (!test_bit(CONFIG_RF_SEQUENCE, &rt2x00dev->flags)) {
spec->num_channels = 14;
......@@ -2561,13 +2552,28 @@ static void rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
rt2x00_rf(&rt2x00dev->chip, RF5325)) {
spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_seq);
}
/*
* Create channel information array
*/
info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
spec->channels_info = info;
txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
for (i = 0; i < 14; i++)
txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
for (i = 0; i < 14; i++)
info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
spec->tx_power_a = txpower;
if (spec->num_channels > 14) {
tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
for (i = 14; i < spec->num_channels; i++)
info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
}
return 0;
}
static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
......@@ -2588,7 +2594,9 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw specifications.
*/
rt61pci_probe_hw_mode(rt2x00dev);
retval = rt61pci_probe_hw_mode(rt2x00dev);
if (retval)
return retval;
/*
* This device requires firmware and DMA mapped skbs.
......
......@@ -1482,17 +1482,10 @@ struct hw_pairwise_ta_entry {
#define MAX_TXPOWER 31
#define DEFAULT_TXPOWER 24
#define TXPOWER_FROM_DEV(__txpower) \
({ \
((__txpower) > MAX_TXPOWER) ? \
DEFAULT_TXPOWER : (__txpower); \
})
#define TXPOWER_TO_DEV(__txpower) \
({ \
((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
(((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
(__txpower)); \
})
#define TXPOWER_FROM_DEV(__txpower) \
(((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
#define TXPOWER_TO_DEV(__txpower) \
clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
#endif /* RT61PCI_H */
......@@ -2107,10 +2107,11 @@ static const struct rf_channel rf_vals_5225_2527[] = {
};
static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
u8 *txpower;
struct channel_info *info;
char *tx_power;
unsigned int i;
/*
......@@ -2126,21 +2127,11 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
rt2x00_eeprom_addr(rt2x00dev,
EEPROM_MAC_ADDR_0));
/*
* Convert tx_power array in eeprom.
*/
txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
for (i = 0; i < 14; i++)
txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
/*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
spec->tx_power_a = NULL;
spec->tx_power_bg = txpower;
spec->tx_power_default = DEFAULT_TXPOWER;
if (rt2x00_rf(&rt2x00dev->chip, RF2528)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528);
......@@ -2158,14 +2149,26 @@ static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->channels = rf_vals_5225_2527;
}
if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
rt2x00_rf(&rt2x00dev->chip, RF5226)) {
txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
for (i = 0; i < 14; i++)
txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
/*
* Create channel information array
*/
info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
spec->tx_power_a = txpower;
spec->channels_info = info;
tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
for (i = 0; i < 14; i++)
info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
if (spec->num_channels > 14) {
tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
for (i = 14; i < spec->num_channels; i++)
info[i].tx_power1 = TXPOWER_FROM_DEV(tx_power[i]);
}
return 0;
}
static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
......@@ -2186,7 +2189,9 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
/*
* Initialize hw specifications.
*/
rt73usb_probe_hw_mode(rt2x00dev);
retval = rt73usb_probe_hw_mode(rt2x00dev);
if (retval)
return retval;
/*
* This device requires firmware.
......
......@@ -1050,17 +1050,10 @@ struct hw_pairwise_ta_entry {
#define MAX_TXPOWER 31
#define DEFAULT_TXPOWER 24
#define TXPOWER_FROM_DEV(__txpower) \
({ \
((__txpower) > MAX_TXPOWER) ? \
DEFAULT_TXPOWER : (__txpower); \
})
#define TXPOWER_TO_DEV(__txpower) \
({ \
((__txpower) <= MIN_TXPOWER) ? MIN_TXPOWER : \
(((__txpower) >= MAX_TXPOWER) ? MAX_TXPOWER : \
(__txpower)); \
})
#define TXPOWER_FROM_DEV(__txpower) \
(((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
#define TXPOWER_TO_DEV(__txpower) \
clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
#endif /* RT73USB_H */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册