Merge tag 'v4.7-rockchip-dts32-1' of...

Merge tag 'v4.7-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

A lot display-controller nodes for DSI and the Analogix DP on rk3288
as well as general display+hdmi support on rk3036. With the Analogix
DP support, Veyron Chromeboks can now finally use their internal
display.

Other than this big improvement we have thermal support on the rk3228,
a long time missing binding document for the General Register Files
block, better operating points for Veyron devices and a bunch of fixes
with parts stemming from warnings that new dtc version can generate.

* tag 'v4.7-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (27 commits)
  ARM: dts: rockchip: move rk3036 memory definition to board files
  ARM: dts: rockchip: enable the eDP on rk3288 veyron devices
  ARM: dts: rockchip: simple panel and backlight supplies on veyron boards
  ARM: dts: rockchip: override edp hpd handling on veyron-pinky and speedy
  ARM: dts: rockchip: add rk3288-veyron-minnie backlight and panel settings
  ARM: dts: rockchip: add rk3288-veyron-jaq backlight and panel overrides
  ARM: dts: rockchip: add core rk3288-veyron backlight and panel nodes
  ARM: dts: rockchip: add startup delay to rk3288-veyron panel-regulators
  ARM: dts: rockchip: move edp-hpd pin definition into common location
  ARM: dts: rockchip: add rk3288 displayport controller node
  ARM: dts: rockchip: add rk3288 edp-phy node
  ARM: dts: rockchip: add missing unitname to cpu_leakage efuse
  ARM: dts: rockchip: drop unneeded properties from mipi node
  ARM: dts: rockchip: clean up gpio-keys nodes
  ARM: dts: rockchip: fix missing usbphy unit-names
  ARM: dts: rockchip: fix rk3288 power-domain unit names
  ARM: dts: rockchip: update rk3288-veyron cpu operating points
  ARM: dts: rockchip: remove broken-cd from emmc and sdio
  ARM: dts: rockchip: enable the tsadc for rk3228 evb
  ARM: dts: rockchip: add the thermal main info found on rk3228
  ...
Signed-off-by: NOlof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/soc/rockchip/grf.txt

+* Rockchip General Register Files (GRF)
+
+The general register file will be used to do static set by software, which
+is composed of many registers for system control.
+
+From RK3368 SoCs, the GRF is divided into two sections,
+- GRF, used for general non-secure system,
+- PMUGRF, used for always on system
+
+Required Properties:
+
+- compatible: GRF should be one of the followings
+   - "rockchip,rk3066-grf", "syscon": for rk3066
+   - "rockchip,rk3188-grf", "syscon": for rk3188
+   - "rockchip,rk3228-grf", "syscon": for rk3228
+   - "rockchip,rk3288-grf", "syscon": for rk3288
+   - "rockchip,rk3368-grf", "syscon": for rk3368
+   - "rockchip,rk3399-grf", "syscon": for rk3399
+- compatible: PMUGRF should be one of the followings
+   - "rockchip,rk3368-pmugrf", "syscon": for rk3368
+   - "rockchip,rk3399-pmugrf", "syscon": for rk3399
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+Example: GRF and PMUGRF of RK3399 SoCs
+
+	pmugrf: syscon@ff320000 {
+		compatible = "rockchip,rk3399-pmugrf", "syscon";
+		reg = <0x0 0xff320000 0x0 0x1000>;
+	};
+
+	grf: syscon@ff770000 {
+		compatible = "rockchip,rk3399-grf", "syscon";
+		reg = <0x0 0xff770000 0x0 0x10000>;
+	};

arch/arm/boot/dts/rk3036-evb.dts

@@ -45,6 +45,11 @@
 / {
 	model = "Rockchip RK3036 Evaluation board";
 	compatible = "rockchip,rk3036-evb", "rockchip,rk3036";
+
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x40000000>;
+	};
 };
 
 &emac {

arch/arm/boot/dts/rk3036-kylin.dts

@@ -46,6 +46,11 @@
 	model = "Rockchip RK3036 KylinBoard";
 	compatible = "rockchip,rk3036-kylin", "rockchip,rk3036";
 
+	memory {
+		device_type = "memory";
+		reg = <0x60000000 0x20000000>;
+	};
+
 	leds: gpio-leds {
 		compatible = "gpio-leds";
 
@@ -130,6 +135,10 @@
 	status = "okay";
 };
 
+&hdmi {
+	status = "okay";
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 
@@ -341,7 +350,6 @@
 &sdio {
 	status = "okay";
 
-	broken-cd;
 	bus-width = <4>;
 	cap-sd-highspeed;
 	cap-sdio-irq;
@@ -385,6 +393,14 @@
 	status = "okay";
 };
 
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
 &pinctrl {
 	leds {
 		led_ctl: led-ctl {

arch/arm/boot/dts/rk3036.dtsi

@@ -63,11 +63,6 @@
 		spi = &spi;
 	};
 
-	memory {
-		device_type = "memory";
-		reg = <0x60000000 0x40000000>;
-	};
-
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -119,6 +114,11 @@
 		interrupt-affinity = <&cpu0>, <&cpu1>;
 	};
 
+	display-subsystem {
+		compatible = "rockchip,display-subsystem";
+		ports = <&vop_out>;
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		arm,cpu-registers-not-fw-configured;
@@ -149,6 +149,36 @@
 		};
 	};
 
+	vop: vop@10118000 {
+		compatible = "rockchip,rk3036-vop";
+		reg = <0x10118000 0x19c>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>;
+		clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+		resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>;
+		reset-names = "axi", "ahb", "dclk";
+		iommus = <&vop_mmu>;
+		status = "disabled";
+
+		vop_out: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			vop_out_hdmi: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&hdmi_in_vop>;
+			};
+		};
+	};
+
+	vop_mmu: iommu@10118300 {
+		compatible = "rockchip,iommu";
+		reg = <0x10118300 0x100>;
+		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "vop_mmu";
+		#iommu-cells = <0>;
+		status = "disabled";
+	};
+
 	gic: interrupt-controller@10139000 {
 		compatible = "arm,gic-400";
 		interrupt-controller;
@@ -237,7 +267,6 @@
 		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x1021c000 0x4000>;
 		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-		broken-cd;
 		bus-width = <8>;
 		cap-mmc-highspeed;
 		clock-frequency = <37500000>;
@@ -297,6 +326,27 @@
 		status = "disabled";
 	};
 
+	hdmi: hdmi@20034000 {
+		compatible = "rockchip,rk3036-inno-hdmi";
+		reg = <0x20034000 0x4000>;
+		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru  PCLK_HDMI>;
+		clock-names = "pclk";
+		rockchip,grf = <&grf>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hdmi_ctl>;
+		status = "disabled";
+
+		hdmi_in: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			hdmi_in_vop: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&vop_out_hdmi>;
+			};
+		};
+	};
+
 	timer: timer@20044000 {
 		compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";
 		reg = <0x20044000 0x20>;
@@ -644,6 +694,15 @@
 			};
 		};
 
+		hdmi {
+			hdmi_ctl: hdmi-ctl {
+				rockchip,pins = <1 8  RK_FUNC_1 &pcfg_pull_none>,
+						<1 9  RK_FUNC_1 &pcfg_pull_none>,
+						<1 10 RK_FUNC_1 &pcfg_pull_none>,
+						<1 11 RK_FUNC_1 &pcfg_pull_none>;
+			};
+		};
+
 		uart0 {
 			uart0_xfer: uart0-xfer {
 				rockchip,pins = <0 16 RK_FUNC_1 &pcfg_pull_default>,

arch/arm/boot/dts/rk3066a-bqcurie2.dts

@@ -42,6 +42,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/input/input.h>
 #include "rk3066a.dtsi"
 
 / {
@@ -77,21 +78,19 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 
-		button@0 {
+		power {
 			gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
 			wakeup-source;
 			debounce-interval = <100>;
 		};
-		button@1 {
+		volume-down {
 			gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */
-			linux,code = <104>;
+			linux,code = <KEY_VOLUMEDOWN>;
 			label = "GPIO Key Vol-";
 			linux,input-type = <1>;
 			debounce-interval = <100>;

arch/arm/boot/dts/rk3066a-rayeager.dts

@@ -41,6 +41,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/input/input.h>
 #include "rk3066a.dtsi"
 
 / {
@@ -61,14 +62,12 @@
 
 	keys: gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		button@0 {
+		power {
 			wakeup-source;
 			gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pwr_key>;
 		};
@@ -182,7 +181,6 @@
 };
 
 &emmc {
-	broken-cd;
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	disable-wp;
@@ -348,7 +346,6 @@
 };
 
 &mmc1 {
-	broken-cd;
 	bus-width = <4>;
 	disable-wp;
 	non-removable;

arch/arm/boot/dts/rk3066a.dtsi

@@ -169,7 +169,7 @@
 		clocks = <&cru PCLK_EFUSE>;
 		clock-names = "pclk_efuse";
 
-		cpu_leakage: cpu_leakage {
+		cpu_leakage: cpu_leakage@17 {
 			reg = <0x17 0x1>;
 		};
 	};
@@ -207,7 +207,7 @@
 		#size-cells = <0>;
 		status = "disabled";
 
-		usbphy0: usb-phy0 {
+		usbphy0: usb-phy@17c {
 			#phy-cells = <0>;
 			reg = <0x17c>;
 			clocks = <&cru SCLK_OTGPHY0>;
@@ -215,7 +215,7 @@
 			#clock-cells = <0>;
 		};
 
-		usbphy1: usb-phy1 {
+		usbphy1: usb-phy@188 {
 			#phy-cells = <0>;
 			reg = <0x188>;
 			clocks = <&cru SCLK_OTGPHY1>;

arch/arm/boot/dts/rk3188-radxarock.dts

@@ -41,6 +41,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/input/input.h>
 #include "rk3188.dtsi"
 
 / {
@@ -54,13 +55,11 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 
-		button@0 {
+		power {
 			gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
 			wakeup-source;

arch/arm/boot/dts/rk3188.dtsi

@@ -154,7 +154,7 @@
 		clocks = <&cru PCLK_EFUSE>;
 		clock-names = "pclk_efuse";
 
-		cpu_leakage: cpu_leakage {
+		cpu_leakage: cpu_leakage@17 {
 			reg = <0x17 0x1>;
 		};
 	};
@@ -166,7 +166,7 @@
 		#size-cells = <0>;
 		status = "disabled";
 
-		usbphy0: usb-phy0 {
+		usbphy0: usb-phy@10c {
 			#phy-cells = <0>;
 			reg = <0x10c>;
 			clocks = <&cru SCLK_OTGPHY0>;
@@ -174,7 +174,7 @@
 			#clock-cells = <0>;
 		};
 
-		usbphy1: usb-phy1 {
+		usbphy1: usb-phy@11c {
 			#phy-cells = <0>;
 			reg = <0x11c>;
 			clocks = <&cru SCLK_OTGPHY1>;

arch/arm/boot/dts/rk3228-evb.dts

@@ -53,7 +53,6 @@
 };
 
 &emmc {
-	broken-cd;
 	cap-mmc-highspeed;
 	mmc-ddr-1_8v;
 	disable-wp;
@@ -61,6 +60,13 @@
 	status = "okay";
 };
 
+&tsadc {
+	status = "okay";
+
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+};
+
 &uart2 {
 	status = "okay";
 };

arch/arm/boot/dts/rk3228.dtsi

@@ -43,6 +43,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/clock/rk3228-cru.h>
+#include <dt-bindings/thermal/thermal.h>
 #include "skeleton.dtsi"
 
 / {
@@ -69,6 +70,7 @@
 				/* KHz    uV */
 				 816000 1000000
 			>;
+			#cooling-cells = <2>; /* min followed by max */
 			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
 		};
@@ -247,6 +249,63 @@
 		assigned-clock-rates = <594000000>;
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				cpu_alert0: cpu_alert0 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_alert1: cpu_alert1 {
+					temperature = <75000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_crit: cpu_crit {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT 6>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device =
+						<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	tsadc: tsadc@11150000 {
+		compatible = "rockchip,rk3228-tsadc";
+		reg = <0x11150000 0x100>;
+		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&otp_gpio>;
+		pinctrl-1 = <&otp_out>;
+		pinctrl-2 = <&otp_gpio>;
+		#thermal-sensor-cells = <0>;
+		rockchip,hw-tshut-temp = <95000>;
+		status = "disabled";
+	};
+
 	emmc: dwmmc@30020000 {
 		compatible = "rockchip,rk3288-dw-mshc";
 		reg = <0x30020000 0x4000>;
@@ -394,6 +453,16 @@
 			};
 		};
 
+		tsadc {
+			otp_gpio: otp-gpio {
+				rockchip,pins = <0 24 RK_FUNC_GPIO &pcfg_pull_none>;
+			};
+
+			otp_out: otp-out {
+				rockchip,pins = <0 24 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
 		uart0 {
 			uart0_xfer: uart0-xfer {
 				rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>,

arch/arm/boot/dts/rk3288-evb.dtsi

@@ -38,6 +38,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pwm/pwm.h>
 #include "rk3288.dtsi"
 
@@ -98,16 +99,14 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwrbtn>;
 
-		button@0 {
+		power {
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
 			wakeup-source;
@@ -172,7 +171,6 @@
 };
 
 &emmc {
-	broken-cd;
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	disable-wp;

arch/arm/boot/dts/rk3288-firefly.dtsi

@@ -40,6 +40,7 @@
  *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
+#include <dt-bindings/input/input.h>
 #include "rk3288.dtsi"
 
 / {
@@ -87,14 +88,12 @@
 
 	keys: gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 
-		button@0 {
+		power {
 			wakeup-source;
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
 			label = "GPIO Power";
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pwr_key>;
 		};
@@ -208,7 +207,6 @@
 };
 
 &emmc {
-	broken-cd;
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	disable-wp;
@@ -509,7 +507,6 @@
 };
 
 &sdio0 {
-	broken-cd;
 	bus-width = <4>;
 	disable-wp;
 	non-removable;

arch/arm/boot/dts/rk3288-popmetal.dts

@@ -41,7 +41,7 @@
  */
 
 /dts-v1/;
-
+#include <dt-bindings/input/input.h>
 #include "rk3288.dtsi"
 
 / {
@@ -62,16 +62,14 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwrbtn>;
 
-		button@0 {
+		power {
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
 			wakeup-source;
@@ -162,7 +160,6 @@
 };
 
 &emmc {
-	broken-cd;
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	disable-wp;

arch/arm/boot/dts/rk3288-r89.dts

@@ -41,6 +41,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/pwm/pwm.h>
 #include "rk3288.dtsi"
 
@@ -61,16 +62,14 @@
 
 	gpio-keys {
 		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
 		autorepeat;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&pwrbtn>;
 
-		button@0 {
+		power {
 			gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
-			linux,code = <116>;
+			linux,code = <KEY_POWER>;
 			label = "GPIO Key Power";
 			linux,input-type = <1>;
 			wakeup-source;

arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi

@@ -54,6 +54,50 @@
 		i2c20 = &i2c_tunnel;
 	};
 
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		brightness-levels = <
+			  0   1   2   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+		default-brightness-level = <128>;
+		enable-gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
+		backlight-boot-off;
+		pinctrl-names = "default";
+		pinctrl-0 = <&bl_en>;
+		pwms = <&pwm0 0 1000000 0>;
+		pwm-delay-us = <10000>;
+	};
+
 	gpio-charger {
 		compatible = "gpio-charger";
 		charger-type = "mains";
@@ -62,6 +106,21 @@
 		pinctrl-0 = <&ac_present_ap>;
 	};
 
+	panel: panel {
+		compatible ="innolux,n116bge", "simple-panel";
+		status = "okay";
+		power-supply = <&vcc33_lcd>;
+		backlight = <&backlight>;
+
+		ports {
+			panel_in: port {
+				panel_in_edp: endpoint {
+					remote-endpoint = <&edp_out_panel>;
+				};
+			};
+		};
+	};
+
 	/* A non-regulated voltage from power supply or battery */
 	vccsys: vccsys {
 		compatible = "regulator-fixed";
@@ -103,6 +162,29 @@
 	};
 };
 
+&edp {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&edp_hpd>;
+
+	ports {
+		edp_out: port@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			edp_out_panel: endpoint {
+				reg = <0>;
+				remote-endpoint = <&panel_in_edp>;
+			};
+		};
+	};
+};
+
+&edp_phy {
+	status = "okay";
+};
+
 &gpio_keys {
 	pinctrl-0 = <&pwr_key_l &ap_lid_int_l>;
 	lid {
@@ -115,6 +197,10 @@
 	};
 };
 
+&pwm0 {
+	status = "okay";
+};
+
 &rk808 {
 	vcc11-supply = <&vcc_5v>;
 
@@ -168,6 +254,14 @@
 	};
 };
 
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};
+
 &pinctrl {
 	pinctrl-0 = <
 		/* Common for sleep and wake, but no owners */
@@ -184,6 +278,12 @@
 		&suspend_l_sleep
 	>;
 
+	backlight {
+		bl_en: bl-en {
+			rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	buttons {
 		ap_lid_int_l: ap-lid-int-l {
 			rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>;

arch/arm/boot/dts/rk3288-veyron-jaq.dts

@@ -61,6 +61,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_enable_h>;
 		regulator-name = "panel_regulator";
+		startup-delay-us = <100000>;
 		vin-supply = <&vcc33_sys>;
 	};
 
@@ -88,6 +89,48 @@
 	};
 };
 
+&backlight {
+	/* Jaq panel PWM must be >= 3%, so start non-zero brightness at 8 */
+	brightness-levels = <
+		  0
+		  8   9  10  11  12  13  14  15
+		 16  17  18  19  20  21  22  23
+		 24  25  26  27  28  29  30  31
+		 32  33  34  35  36  37  38  39
+		 40  41  42  43  44  45  46  47
+		 48  49  50  51  52  53  54  55
+		 56  57  58  59  60  61  62  63
+		 64  65  66  67  68  69  70  71
+		 72  73  74  75  76  77  78  79
+		 80  81  82  83  84  85  86  87
+		 88  89  90  91  92  93  94  95
+		 96  97  98  99 100 101 102 103
+		104 105 106 107 108 109 110 111
+		112 113 114 115 116 117 118 119
+		120 121 122 123 124 125 126 127
+		128 129 130 131 132 133 134 135
+		136 137 138 139 140 141 142 143
+		144 145 146 147 148 149 150 151
+		152 153 154 155 156 157 158 159
+		160 161 162 163 164 165 166 167
+		168 169 170 171 172 173 174 175
+		176 177 178 179 180 181 182 183
+		184 185 186 187 188 189 190 191
+		192 193 194 195 196 197 198 199
+		200 201 202 203 204 205 206 207
+		208 209 210 211 212 213 214 215
+		216 217 218 219 220 221 222 223
+		224 225 226 227 228 229 230 231
+		232 233 234 235 236 237 238 239
+		240 241 242 243 244 245 246 247
+		248 249 250 251 252 253 254 255>;
+	power-supply = <&backlight_regulator>;
+};
+
+&panel {
+	power-supply = <&panel_regulator>;
+};
+
 &rk808 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;
@@ -142,12 +185,6 @@
 		};
 	};
 
-	edp {
-		edp_hpd: edp_hpd {
-			rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>;
-		};
-	};
-
 	hdmi {
 		vcc50_hdmi_en: vcc50-hdmi-en {
 			rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>;

arch/arm/boot/dts/rk3288-veyron-jerry.dts

@@ -60,6 +60,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_enable_h>;
 		regulator-name = "panel_regulator";
+		startup-delay-us = <100000>;
 		vin-supply = <&vcc33_sys>;
 	};
 
@@ -87,6 +88,14 @@
 	};
 };
 
+&backlight {
+	power-supply = <&backlight_regulator>;
+};
+
+&panel {
+	power-supply= <&panel_regulator>;
+};
+
 &rk808 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pmic_int_l>;

arch/arm/boot/dts/rk3288-veyron-minnie.dts

@@ -70,6 +70,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_enable_h>;
 		regulator-name = "panel_regulator";
+		startup-delay-us = <100000>;
 		vin-supply = <&vcc33_sys>;
 	};
 
@@ -86,6 +87,44 @@
 	};
 };
 
+&backlight {
+	/* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */
+	brightness-levels = <
+			  0   3   4   5   6   7
+			  8   9  10  11  12  13  14  15
+			 16  17  18  19  20  21  22  23
+			 24  25  26  27  28  29  30  31
+			 32  33  34  35  36  37  38  39
+			 40  41  42  43  44  45  46  47
+			 48  49  50  51  52  53  54  55
+			 56  57  58  59  60  61  62  63
+			 64  65  66  67  68  69  70  71
+			 72  73  74  75  76  77  78  79
+			 80  81  82  83  84  85  86  87
+			 88  89  90  91  92  93  94  95
+			 96  97  98  99 100 101 102 103
+			104 105 106 107 108 109 110 111
+			112 113 114 115 116 117 118 119
+			120 121 122 123 124 125 126 127
+			128 129 130 131 132 133 134 135
+			136 137 138 139 140 141 142 143
+			144 145 146 147 148 149 150 151
+			152 153 154 155 156 157 158 159
+			160 161 162 163 164 165 166 167
+			168 169 170 171 172 173 174 175
+			176 177 178 179 180 181 182 183
+			184 185 186 187 188 189 190 191
+			192 193 194 195 196 197 198 199
+			200 201 202 203 204 205 206 207
+			208 209 210 211 212 213 214 215
+			216 217 218 219 220 221 222 223
+			224 225 226 227 228 229 230 231
+			232 233 234 235 236 237 238 239
+			240 241 242 243 244 245 246 247
+			248 249 250 251 252 253 254 255>;
+	power-supply = <&backlight_regulator>;
+};
+
 &emmc {
 	/delete-property/mmc-hs200-1_8v;
 };
@@ -135,6 +174,11 @@
 	};
 };
 
+&panel {
+	compatible = "auo,b101ean01", "simple-panel";
+	power-supply= <&panel_regulator>;
+};
+
 &rk808 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>;

arch/arm/boot/dts/rk3288-veyron-pinky.dts

@@ -65,6 +65,13 @@
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8 &emmc_reset>;
 };
 
+&edp {
+	/delete-property/pinctrl-names;
+	/delete-property/pinctrl-0;
+
+	force-hpd;
+};
+
 &gpio_keys {
 	pinctrl-0 = <&pwr_key_h &ap_lid_int_l>;
 

arch/arm/boot/dts/rk3288-veyron-speedy.dts

@@ -61,6 +61,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&lcd_enable_h>;
 		regulator-name = "panel_regulator";
+		startup-delay-us = <100000>;
 		vin-supply = <&vcc33_sys>;
 	};
 
@@ -88,6 +89,10 @@
 	};
 };
 
+&backlight {
+	power-supply = <&backlight_regulator>;
+};
+
 &cpu_alert0 {
 	temperature = <65000>;
 };
@@ -96,6 +101,17 @@
 	temperature = <70000>;
 };
 
+&edp {
+	/delete-property/pinctrl-names;
+	/delete-property/pinctrl-0;
+
+	force-hpd;
+};
+
+&panel {
+	power-supply= <&panel_regulator>;
+};
+
 &rk808 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pmic_int_l>;

arch/arm/boot/dts/rk3288-veyron.dtsi

@@ -141,12 +141,27 @@
 
 &cpu0 {
 	cpu0-supply = <&vdd_cpu>;
+	operating-points = <
+		/* KHz    uV */
+		1800000 1400000
+		1704000 1350000
+		1608000 1300000
+		1512000 1250000
+		1416000 1200000
+		1200000 1100000
+		1008000 1050000
+		 816000 1000000
+		 696000  950000
+		 600000  900000
+		 408000  900000
+		 216000  900000
+		 126000  900000
+	>;
 };
 
 &emmc {
 	status = "okay";
 
-	broken-cd;
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	rockchip,default-sample-phase = <158>;
@@ -347,7 +362,6 @@
 &sdio0 {
 	status = "okay";
 
-	broken-cd;
 	bus-width = <4>;
 	cap-sd-highspeed;
 	cap-sdio-irq;

arch/arm/boot/dts/rk3288.dtsi

@@ -201,6 +201,15 @@
 		#clock-cells = <0>;
 	};
 
+	edp_phy: edp-phy {
+		compatible = "rockchip,rk3288-dp-phy";
+		clocks = <&cru SCLK_EDP_24M>;
+		clock-names = "24m";
+		rockchip,grf = <&grf>;
+		#phy-cells = <0>;
+		status = "disabled";
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		arm,cpu-registers-not-fw-configured;
@@ -659,7 +668,7 @@
 			 *	*_HDMI		HDMI
 			 *	*_MIPI_*	MIPI
 			 */
-			pd_vio {
+			pd_vio@RK3288_PD_VIO {
 				reg = <RK3288_PD_VIO>;
 				clocks = <&cru ACLK_IEP>,
 					 <&cru ACLK_ISP>,
@@ -692,7 +701,7 @@
 			 * Note: The following 3 are HEVC(H.265) clocks,
 			 * and on the ACLK_HEVC_NIU (NOC).
 			 */
-			pd_hevc {
+			pd_hevc@RK3288_PD_HEVC {
 				reg = <RK3288_PD_HEVC>;
 				clocks = <&cru ACLK_HEVC>,
 					 <&cru SCLK_HEVC_CABAC>,
@@ -704,7 +713,7 @@
 			 * (video endecoder & decoder) clocks that on the
 			 * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC).
 			 */
-			pd_video {
+			pd_video@RK3288_PD_VIDEO {
 				reg = <RK3288_PD_VIDEO>;
 				clocks = <&cru ACLK_VCODEC>,
 					 <&cru HCLK_VCODEC>;
@@ -714,7 +723,7 @@
 			 * Note: ACLK_GPU is the GPU clock,
 			 * and on the ACLK_GPU_NIU (NOC).
 			 */
-			pd_gpu {
+			pd_gpu@RK3288_PD_GPU {
 				reg = <RK3288_PD_GPU>;
 				clocks = <&cru ACLK_GPU>;
 			};
@@ -765,7 +774,7 @@
 		clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>;
 		dmas = <&dmac_bus_s 3>;
 		dma-names = "tx";
-		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&spdif_tx>;
 		rockchip,grf = <&grf>;
@@ -775,7 +784,7 @@
 	i2s: i2s@ff890000 {
 		compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s";
 		reg = <0xff890000 0x10000>;
-		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		dmas = <&dmac_bus_s 0>, <&dmac_bus_s 1>;
@@ -821,6 +830,12 @@
 				reg = <0>;
 				remote-endpoint = <&hdmi_in_vopb>;
 			};
+
+			vopb_out_edp: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&edp_in_vopb>;
+			};
+
 			vopb_out_mipi: endpoint@2 {
 				reg = <2>;
 				remote-endpoint = <&mipi_in_vopb>;
@@ -858,6 +873,12 @@
 				reg = <0>;
 				remote-endpoint = <&hdmi_in_vopl>;
 			};
+
+			vopl_out_edp: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&edp_in_vopl>;
+			};
+
 			vopl_out_mipi: endpoint@2 {
 				reg = <2>;
 				remote-endpoint = <&mipi_in_vopl>;
@@ -878,19 +899,16 @@
 	mipi_dsi: mipi@ff960000 {
 		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
 		reg = <0xff960000 0x4000>;
-		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_DSI0>;
 		clock-names = "ref", "pclk";
+		power-domains = <&power RK3288_PD_VIO>;
 		rockchip,grf = <&grf>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";
 
 		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
 			mipi_in: port {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -906,6 +924,38 @@
 		};
 	};
 
+	edp: dp@ff970000 {
+		compatible = "rockchip,rk3288-dp";
+		reg = <0xff970000 0x4000>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_EDP>, <&cru PCLK_EDP_CTRL>;
+		clock-names = "dp", "pclk";
+		phys = <&edp_phy>;
+		phy-names = "dp";
+		resets = <&cru SRST_EDP>;
+		reset-names = "dp";
+		rockchip,grf = <&grf>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			edp_in: port@0 {
+				reg = <0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				edp_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_edp>;
+				};
+				edp_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_edp>;
+				};
+			};
+		};
+	};
+
 	hdmi: hdmi@ff980000 {
 		compatible = "rockchip,rk3288-dw-hdmi";
 		reg = <0xff980000 0x20000>;
@@ -966,7 +1016,7 @@
 		#size-cells = <0>;
 		status = "disabled";
 
-		usbphy0: usb-phy0 {
+		usbphy0: usb-phy@320 {
 			#phy-cells = <0>;
 			reg = <0x320>;
 			clocks = <&cru SCLK_OTGPHY0>;
@@ -974,7 +1024,7 @@
 			#clock-cells = <0>;
 		};
 
-		usbphy1: usb-phy1 {
+		usbphy1: usb-phy@334 {
 			#phy-cells = <0>;
 			reg = <0x334>;
 			clocks = <&cru SCLK_OTGPHY1>;
@@ -982,7 +1032,7 @@
 			#clock-cells = <0>;
 		};
 
-		usbphy2: usb-phy2 {
+		usbphy2: usb-phy@348 {
 			#phy-cells = <0>;
 			reg = <0x348>;
 			clocks = <&cru SCLK_OTGPHY2>;
@@ -1158,6 +1208,12 @@
 			};
 		};
 
+		edp {
+			edp_hpd: edp-hpd {
+				rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>;
+			};
+		};
+
 		i2c0 {
 			i2c0_xfer: i2c0-xfer {
 				rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>,