提交 8b8673b8 编写于 作者: K Kumar Gala

powerpc/85xx: Rework P2041RDB device tree

Utilize new split between board & SoC, and new SoC device trees split
into pre & post utilizing 'template' includes for SoC IP blocks.

Other changes include:
* Adding of MPIC timer blocks
* Dropping "fsl,p2041-IP..." from compatibles for standard blocks
* Removed mpic interrupt-parent from dcsr-epu node, just use top level
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
上级 941d71c7
/*
* P2041/P2040 Silicon/SoC Device Tree Source (post include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&lbc {
compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
interrupts = <25 2 0 0>;
#address-cells = <2>;
#size-cells = <1>;
};
/* controller at 0x200000 */
&pci0 {
compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 15>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 1 15>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 40 1 0 0
0000 0 0 2 &mpic 1 1 0 0
0000 0 0 3 &mpic 2 1 0 0
0000 0 0 4 &mpic 3 1 0 0
>;
};
};
/* controller at 0x201000 */
&pci1 {
compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 14>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 1 14>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 41 1 0 0
0000 0 0 2 &mpic 5 1 0 0
0000 0 0 3 &mpic 6 1 0 0
0000 0 0 4 &mpic 7 1 0 0
>;
};
};
/* controller at 0x202000 */
&pci2 {
compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
interrupts = <16 2 1 13>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 1 13>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 42 1 0 0
0000 0 0 2 &mpic 9 1 0 0
0000 0 0 3 &mpic 10 1 0 0
0000 0 0 4 &mpic 11 1 0 0
>;
};
};
&dcsr {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,dcsr", "simple-bus";
dcsr-epu@0 {
compatible = "fsl,dcsr-epu";
interrupts = <52 2 0 0
84 2 0 0
85 2 0 0>;
reg = <0x0 0x1000>;
};
dcsr-npc {
compatible = "fsl,dcsr-npc";
reg = <0x1000 0x1000 0x1000000 0x8000>;
};
dcsr-nxc@2000 {
compatible = "fsl,dcsr-nxc";
reg = <0x2000 0x1000>;
};
dcsr-corenet {
compatible = "fsl,dcsr-corenet";
reg = <0x8000 0x1000 0xB0000 0x1000>;
};
dcsr-dpaa@9000 {
compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
reg = <0x9000 0x1000>;
};
dcsr-ocn@11000 {
compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
reg = <0x11000 0x1000>;
};
dcsr-ddr@12000 {
compatible = "fsl,dcsr-ddr";
dev-handle = <&ddr1>;
reg = <0x12000 0x1000>;
};
dcsr-nal@18000 {
compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
reg = <0x18000 0x1000>;
};
dcsr-rcpm@22000 {
compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
reg = <0x22000 0x1000>;
};
dcsr-cpu-sb-proxy@40000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu0>;
reg = <0x40000 0x1000>;
};
dcsr-cpu-sb-proxy@41000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu1>;
reg = <0x41000 0x1000>;
};
dcsr-cpu-sb-proxy@42000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu2>;
reg = <0x42000 0x1000>;
};
dcsr-cpu-sb-proxy@43000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu3>;
reg = <0x43000 0x1000>;
};
};
&soc {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
soc-sram-error {
compatible = "fsl,soc-sram-error";
interrupts = <16 2 1 29>;
};
corenet-law@0 {
compatible = "fsl,corenet-law";
reg = <0x0 0x1000>;
fsl,num-laws = <32>;
};
ddr1: memory-controller@8000 {
compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
reg = <0x8000 0x1000>;
interrupts = <16 2 1 23>;
};
cpc: l3-cache-controller@10000 {
compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
reg = <0x10000 0x1000>;
interrupts = <16 2 1 27>;
};
corenet-cf@18000 {
compatible = "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 31>;
fsl,ccf-num-csdids = <32>;
fsl,ccf-num-snoopids = <32>;
};
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
reg = <0x20000 0x4000>;
interrupts = <
24 2 0 0
16 2 1 30>;
};
/include/ "qoriq-mpic.dtsi"
guts: global-utilities@e0000 {
compatible = "fsl,qoriq-device-config-1.0";
reg = <0xe0000 0xe00>;
fsl,has-rstcr;
#sleep-cells = <1>;
fsl,liodn-bits = <12>;
};
pins: global-utilities@e0e00 {
compatible = "fsl,qoriq-pin-control-1.0";
reg = <0xe0e00 0x200>;
#sleep-cells = <2>;
};
clockgen: global-utilities@e1000 {
compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
};
rcpm: global-utilities@e2000 {
compatible = "fsl,qoriq-rcpm-1.0";
reg = <0xe2000 0x1000>;
#sleep-cells = <1>;
};
sfp: sfp@e8000 {
compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
reg = <0xe8000 0x1000>;
};
serdes: serdes@ea000 {
compatible = "fsl,p2041-serdes";
reg = <0xea000 0x1000>;
};
/include/ "qoriq-dma-0.dtsi"
/include/ "qoriq-dma-1.dtsi"
/include/ "qoriq-espi-0.dtsi"
spi@110000 {
fsl,espi-num-chipselects = <4>;
};
/include/ "qoriq-esdhc-0.dtsi"
sdhc@114000 {
sdhci,auto-cmd12;
};
/include/ "qoriq-i2c-0.dtsi"
/include/ "qoriq-i2c-1.dtsi"
/include/ "qoriq-duart-0.dtsi"
/include/ "qoriq-duart-1.dtsi"
/include/ "qoriq-gpio-0.dtsi"
/include/ "qoriq-usb2-mph-0.dtsi"
usb0: usb@210000 {
phy_type = "utmi";
port0;
};
/include/ "qoriq-usb2-dr-0.dtsi"
usb1: usb@211000 {
dr_mode = "host";
phy_type = "utmi";
};
/include/ "qoriq-sata2-0.dtsi"
/include/ "qoriq-sata2-1.dtsi"
/include/ "qoriq-sec4.2-0.dtsi"
};
/*
* P2041 Silicon/SoC Device Tree Source (pre include)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/ {
compatible = "fsl,P2041";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
ccsr = &soc;
dcsr = &dcsr;
serial0 = &serial0;
serial1 = &serial1;
serial2 = &serial2;
serial3 = &serial3;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
usb0 = &usb0;
usb1 = &usb1;
dma0 = &dma0;
dma1 = &dma1;
sdhc = &sdhc;
msi0 = &msi0;
msi1 = &msi1;
msi2 = &msi2;
crypto = &crypto;
sec_jr0 = &sec_jr0;
sec_jr1 = &sec_jr1;
sec_jr2 = &sec_jr2;
sec_jr3 = &sec_jr3;
rtic_a = &rtic_a;
rtic_b = &rtic_b;
rtic_c = &rtic_c;
rtic_d = &rtic_d;
sec_mon = &sec_mon;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
};
};
cpu1: PowerPC,e500mc@1 {
device_type = "cpu";
reg = <1>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
};
};
cpu2: PowerPC,e500mc@2 {
device_type = "cpu";
reg = <2>;
next-level-cache = <&L2_2>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
};
};
cpu3: PowerPC,e500mc@3 {
device_type = "cpu";
reg = <3>;
next-level-cache = <&L2_3>;
L2_3: l2-cache {
next-level-cache = <&cpc>;
};
};
};
};
......@@ -32,7 +32,7 @@
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "p2041si.dtsi"
/include/ "fsl/p2041si-pre.dtsi"
/ {
model = "fsl,P2041RDB";
......@@ -50,6 +50,8 @@
};
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
......@@ -106,7 +108,7 @@
};
};
localbus@ffe124000 {
lbc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xe8000000 0x08000000>;
......@@ -122,6 +124,7 @@
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
fsl,msi = <&msi0>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
......@@ -137,6 +140,7 @@
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
fsl,msi = <&msi1>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
......@@ -152,6 +156,7 @@
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
fsl,msi = <&msi2>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
......@@ -163,3 +168,5 @@
};
};
};
/include/ "fsl/p2041si-post.dtsi"
/*
* P2041 Silicon Device Tree Source
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/dts-v1/;
/ {
compatible = "fsl,P2041";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
ccsr = &soc;
dcsr = &dcsr;
serial0 = &serial0;
serial1 = &serial1;
serial2 = &serial2;
serial3 = &serial3;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
usb0 = &usb0;
usb1 = &usb1;
dma0 = &dma0;
dma1 = &dma1;
sdhc = &sdhc;
msi0 = &msi0;
msi1 = &msi1;
msi2 = &msi2;
crypto = &crypto;
sec_jr0 = &sec_jr0;
sec_jr1 = &sec_jr1;
sec_jr2 = &sec_jr2;
sec_jr3 = &sec_jr3;
rtic_a = &rtic_a;
rtic_b = &rtic_b;
rtic_c = &rtic_c;
rtic_d = &rtic_d;
sec_mon = &sec_mon;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: PowerPC,e500mc@0 {
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
next-level-cache = <&cpc>;
};
};
cpu1: PowerPC,e500mc@1 {
device_type = "cpu";
reg = <1>;
next-level-cache = <&L2_1>;
L2_1: l2-cache {
next-level-cache = <&cpc>;
};
};
cpu2: PowerPC,e500mc@2 {
device_type = "cpu";
reg = <2>;
next-level-cache = <&L2_2>;
L2_2: l2-cache {
next-level-cache = <&cpc>;
};
};
cpu3: PowerPC,e500mc@3 {
device_type = "cpu";
reg = <3>;
next-level-cache = <&L2_3>;
L2_3: l2-cache {
next-level-cache = <&cpc>;
};
};
};
dcsr: dcsr@f00000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,dcsr", "simple-bus";
dcsr-epu@0 {
compatible = "fsl,dcsr-epu";
interrupts = <52 2 0 0
84 2 0 0
85 2 0 0>;
interrupt-parent = <&mpic>;
reg = <0x0 0x1000>;
};
dcsr-npc {
compatible = "fsl,dcsr-npc";
reg = <0x1000 0x1000 0x1000000 0x8000>;
};
dcsr-nxc@2000 {
compatible = "fsl,dcsr-nxc";
reg = <0x2000 0x1000>;
};
dcsr-corenet {
compatible = "fsl,dcsr-corenet";
reg = <0x8000 0x1000 0xB0000 0x1000>;
};
dcsr-dpaa@9000 {
compatible = "fsl,p2041-dcsr-dpaa", "fsl,dcsr-dpaa";
reg = <0x9000 0x1000>;
};
dcsr-ocn@11000 {
compatible = "fsl,p2041-dcsr-ocn", "fsl,dcsr-ocn";
reg = <0x11000 0x1000>;
};
dcsr-ddr@12000 {
compatible = "fsl,dcsr-ddr";
dev-handle = <&ddr>;
reg = <0x12000 0x1000>;
};
dcsr-nal@18000 {
compatible = "fsl,p2041-dcsr-nal", "fsl,dcsr-nal";
reg = <0x18000 0x1000>;
};
dcsr-rcpm@22000 {
compatible = "fsl,p2041-dcsr-rcpm", "fsl,dcsr-rcpm";
reg = <0x22000 0x1000>;
};
dcsr-cpu-sb-proxy@40000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu0>;
reg = <0x40000 0x1000>;
};
dcsr-cpu-sb-proxy@41000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu1>;
reg = <0x41000 0x1000>;
};
dcsr-cpu-sb-proxy@42000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu2>;
reg = <0x42000 0x1000>;
};
dcsr-cpu-sb-proxy@43000 {
compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy";
cpu-handle = <&cpu3>;
reg = <0x43000 0x1000>;
};
};
soc: soc@ffe000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "simple-bus";
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
soc-sram-error {
compatible = "fsl,soc-sram-error";
interrupts = <16 2 1 29>;
};
corenet-law@0 {
compatible = "fsl,corenet-law";
reg = <0x0 0x1000>;
fsl,num-laws = <32>;
};
ddr: memory-controller@8000 {
compatible = "fsl,qoriq-memory-controller-v4.5", "fsl,qoriq-memory-controller";
reg = <0x8000 0x1000>;
interrupts = <16 2 1 23>;
};
cpc: l3-cache-controller@10000 {
compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
reg = <0x10000 0x1000>;
interrupts = <16 2 1 27>;
};
corenet-cf@18000 {
compatible = "fsl,corenet-cf";
reg = <0x18000 0x1000>;
interrupts = <16 2 1 31>;
fsl,ccf-num-csdids = <32>;
fsl,ccf-num-snoopids = <32>;
};
iommu@20000 {
compatible = "fsl,pamu-v1.0", "fsl,pamu";
reg = <0x20000 0x4000>;
interrupts = <
24 2 0 0
16 2 1 30>;
};
mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <4>;
reg = <0x40000 0x40000>;
compatible = "fsl,mpic", "chrp,open-pic";
device_type = "open-pic";
};
msi0: msi@41600 {
compatible = "fsl,mpic-msi";
reg = <0x41600 0x200>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe0 0 0 0
0xe1 0 0 0
0xe2 0 0 0
0xe3 0 0 0
0xe4 0 0 0
0xe5 0 0 0
0xe6 0 0 0
0xe7 0 0 0>;
};
msi1: msi@41800 {
compatible = "fsl,mpic-msi";
reg = <0x41800 0x200>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe8 0 0 0
0xe9 0 0 0
0xea 0 0 0
0xeb 0 0 0
0xec 0 0 0
0xed 0 0 0
0xee 0 0 0
0xef 0 0 0>;
};
msi2: msi@41a00 {
compatible = "fsl,mpic-msi";
reg = <0x41a00 0x200>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xf0 0 0 0
0xf1 0 0 0
0xf2 0 0 0
0xf3 0 0 0
0xf4 0 0 0
0xf5 0 0 0
0xf6 0 0 0
0xf7 0 0 0>;
};
guts: global-utilities@e0000 {
compatible = "fsl,qoriq-device-config-1.0";
reg = <0xe0000 0xe00>;
fsl,has-rstcr;
#sleep-cells = <1>;
fsl,liodn-bits = <12>;
};
pins: global-utilities@e0e00 {
compatible = "fsl,qoriq-pin-control-1.0";
reg = <0xe0e00 0x200>;
#sleep-cells = <2>;
};
clockgen: global-utilities@e1000 {
compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
reg = <0xe1000 0x1000>;
clock-frequency = <0>;
};
rcpm: global-utilities@e2000 {
compatible = "fsl,qoriq-rcpm-1.0";
reg = <0xe2000 0x1000>;
#sleep-cells = <1>;
};
sfp: sfp@e8000 {
compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
reg = <0xe8000 0x1000>;
};
serdes: serdes@ea000 {
compatible = "fsl,p2041-serdes";
reg = <0xea000 0x1000>;
};
dma0: dma@100300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
reg = <0x100300 0x4>;
ranges = <0x0 0x100100 0x200>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,p2041-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupts = <28 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,p2041-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupts = <29 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,p2041-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupts = <30 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,p2041-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupts = <31 2 0 0>;
};
};
dma1: dma@101300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
reg = <0x101300 0x4>;
ranges = <0x0 0x101100 0x200>;
cell-index = <1>;
dma-channel@0 {
compatible = "fsl,p2041-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupts = <32 2 0 0>;
};
dma-channel@80 {
compatible = "fsl,p2041-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupts = <33 2 0 0>;
};
dma-channel@100 {
compatible = "fsl,p2041-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupts = <34 2 0 0>;
};
dma-channel@180 {
compatible = "fsl,p2041-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupts = <35 2 0 0>;
};
};
spi@110000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,p2041-espi", "fsl,mpc8536-espi";
reg = <0x110000 0x1000>;
interrupts = <53 0x2 0 0>;
fsl,espi-num-chipselects = <4>;
};
sdhc: sdhc@114000 {
compatible = "fsl,p2041-esdhc", "fsl,esdhc";
reg = <0x114000 0x1000>;
interrupts = <48 2 0 0>;
sdhci,auto-cmd12;
clock-frequency = <0>;
};
i2c@118000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x118000 0x100>;
interrupts = <38 2 0 0>;
dfsrr;
};
i2c@118100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x118100 0x100>;
interrupts = <38 2 0 0>;
dfsrr;
};
i2c@119000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <2>;
compatible = "fsl-i2c";
reg = <0x119000 0x100>;
interrupts = <39 2 0 0>;
dfsrr;
};
i2c@119100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <3>;
compatible = "fsl-i2c";
reg = <0x119100 0x100>;
interrupts = <39 2 0 0>;
dfsrr;
};
serial0: serial@11c500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x11c500 0x100>;
clock-frequency = <0>;
interrupts = <36 2 0 0>;
};
serial1: serial@11c600 {
cell-index = <1>;
device_type = "serial";
compatible = "ns16550";
reg = <0x11c600 0x100>;
clock-frequency = <0>;
interrupts = <36 2 0 0>;
};
serial2: serial@11d500 {
cell-index = <2>;
device_type = "serial";
compatible = "ns16550";
reg = <0x11d500 0x100>;
clock-frequency = <0>;
interrupts = <37 2 0 0>;
};
serial3: serial@11d600 {
cell-index = <3>;
device_type = "serial";
compatible = "ns16550";
reg = <0x11d600 0x100>;
clock-frequency = <0>;
interrupts = <37 2 0 0>;
};
gpio0: gpio@130000 {
compatible = "fsl,p2041-gpio", "fsl,qoriq-gpio";
reg = <0x130000 0x1000>;
interrupts = <55 2 0 0>;
#gpio-cells = <2>;
gpio-controller;
};
usb0: usb@210000 {
compatible = "fsl,p2041-usb2-mph",
"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
reg = <0x210000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <44 0x2 0 0>;
phy_type = "utmi";
port0;
};
usb1: usb@211000 {
compatible = "fsl,p2041-usb2-dr",
"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
reg = <0x211000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <45 0x2 0 0>;
phy_type = "utmi";
};
sata@220000 {
compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
reg = <0x220000 0x1000>;
interrupts = <68 0x2 0 0>;
};
sata@221000 {
compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
reg = <0x221000 0x1000>;
interrupts = <69 0x2 0 0>;
};
crypto: crypto@300000 {
compatible = "fsl,sec-v4.2", "fsl,sec-v4.0";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x300000 0x10000>;
ranges = <0 0x300000 0x10000>;
interrupts = <92 2 0 0>;
sec_jr0: jr@1000 {
compatible = "fsl,sec-v4.2-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x1000 0x1000>;
interrupts = <88 2 0 0>;
};
sec_jr1: jr@2000 {
compatible = "fsl,sec-v4.2-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x2000 0x1000>;
interrupts = <89 2 0 0>;
};
sec_jr2: jr@3000 {
compatible = "fsl,sec-v4.2-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x3000 0x1000>;
interrupts = <90 2 0 0>;
};
sec_jr3: jr@4000 {
compatible = "fsl,sec-v4.2-job-ring",
"fsl,sec-v4.0-job-ring";
reg = <0x4000 0x1000>;
interrupts = <91 2 0 0>;
};
rtic@6000 {
compatible = "fsl,sec-v4.2-rtic",
"fsl,sec-v4.0-rtic";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x6000 0x100>;
ranges = <0x0 0x6100 0xe00>;
rtic_a: rtic-a@0 {
compatible = "fsl,sec-v4.2-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
reg = <0x00 0x20 0x100 0x80>;
};
rtic_b: rtic-b@20 {
compatible = "fsl,sec-v4.2-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
reg = <0x20 0x20 0x200 0x80>;
};
rtic_c: rtic-c@40 {
compatible = "fsl,sec-v4.2-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
reg = <0x40 0x20 0x300 0x80>;
};
rtic_d: rtic-d@60 {
compatible = "fsl,sec-v4.2-rtic-memory",
"fsl,sec-v4.0-rtic-memory";
reg = <0x60 0x20 0x500 0x80>;
};
};
};
sec_mon: sec_mon@314000 {
compatible = "fsl,sec-v4.2-mon", "fsl,sec-v4.0-mon";
reg = <0x314000 0x1000>;
interrupts = <93 2 0 0>;
};
};
localbus@ffe124000 {
compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
interrupts = <25 2 0 0>;
#address-cells = <2>;
#size-cells = <1>;
};
pci0: pcie@ffe200000 {
compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
fsl,msi = <&msi0>;
interrupts = <16 2 1 15>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 1 15>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 40 1 0 0
0000 0 0 2 &mpic 1 1 0 0
0000 0 0 3 &mpic 2 1 0 0
0000 0 0 4 &mpic 3 1 0 0
>;
};
};
pci1: pcie@ffe201000 {
compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0 0xff>;
clock-frequency = <33333333>;
fsl,msi = <&msi1>;
interrupts = <16 2 1 14>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 1 14>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 41 1 0 0
0000 0 0 2 &mpic 5 1 0 0
0000 0 0 3 &mpic 6 1 0 0
0000 0 0 4 &mpic 7 1 0 0
>;
};
};
pci2: pcie@ffe202000 {
compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
device_type = "pci";
#size-cells = <2>;
#address-cells = <3>;
bus-range = <0x0 0xff>;
clock-frequency = <33333333>;
fsl,msi = <&msi2>;
interrupts = <16 2 1 13>;
pcie@0 {
reg = <0 0 0 0 0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
interrupts = <16 2 1 13>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x0 */
0000 0 0 1 &mpic 42 1 0 0
0000 0 0 2 &mpic 9 1 0 0
0000 0 0 3 &mpic 10 1 0 0
0000 0 0 4 &mpic 11 1 0 0
>;
};
};
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册