NTB: unify translation addresses

There is no need for the upstream and downstream addresses to be different
for the NTB configs. Go to using a single set of address. It is still
possible to configure them differently using module parameter override
however.
Signed-off-by: NDave Jiang <dave.jiang@intel.com>
Acked and Tested-by: Allen Hubbe <Allen.Hubbe@emc.com>
Signed-off-by: NJon Mason <jdmason@kudzu.us>

drivers/ntb/hw/intel/ntb_hw_intel.c

@@ -2204,17 +2204,17 @@ static const struct intel_ntb_xlat_reg xeon_sec_xlat = {
 };
 
 static struct intel_b2b_addr xeon_b2b_usd_addr = {
-	.bar2_addr64		= XEON_B2B_BAR2_USD_ADDR64,
-	.bar4_addr64		= XEON_B2B_BAR4_USD_ADDR64,
-	.bar4_addr32		= XEON_B2B_BAR4_USD_ADDR32,
-	.bar5_addr32		= XEON_B2B_BAR5_USD_ADDR32,
+	.bar2_addr64		= XEON_B2B_BAR2_ADDR64,
+	.bar4_addr64		= XEON_B2B_BAR4_ADDR64,
+	.bar4_addr32		= XEON_B2B_BAR4_ADDR32,
+	.bar5_addr32		= XEON_B2B_BAR5_ADDR32,
 };
 
 static struct intel_b2b_addr xeon_b2b_dsd_addr = {
-	.bar2_addr64		= XEON_B2B_BAR2_DSD_ADDR64,
-	.bar4_addr64		= XEON_B2B_BAR4_DSD_ADDR64,
-	.bar4_addr32		= XEON_B2B_BAR4_DSD_ADDR32,
-	.bar5_addr32		= XEON_B2B_BAR5_DSD_ADDR32,
+	.bar2_addr64		= XEON_B2B_BAR2_ADDR64,
+	.bar4_addr64		= XEON_B2B_BAR4_ADDR64,
+	.bar4_addr32		= XEON_B2B_BAR4_ADDR32,
+	.bar5_addr32		= XEON_B2B_BAR5_ADDR32,
 };
 
 /* operations for primary side of local ntb */

drivers/ntb/hw/intel/ntb_hw_intel.h

@@ -227,16 +227,11 @@
 
 /* Use the following addresses for translation between b2b ntb devices in case
  * the hardware default values are not reliable. */
-#define XEON_B2B_BAR0_USD_ADDR		0x1000000000000000ull
-#define XEON_B2B_BAR2_USD_ADDR64	0x2000000000000000ull
-#define XEON_B2B_BAR4_USD_ADDR64	0x4000000000000000ull
-#define XEON_B2B_BAR4_USD_ADDR32	0x20000000u
-#define XEON_B2B_BAR5_USD_ADDR32	0x40000000u
-#define XEON_B2B_BAR0_DSD_ADDR		0x9000000000000000ull
-#define XEON_B2B_BAR2_DSD_ADDR64	0xa000000000000000ull
-#define XEON_B2B_BAR4_DSD_ADDR64	0xc000000000000000ull
-#define XEON_B2B_BAR4_DSD_ADDR32	0xa0000000u
-#define XEON_B2B_BAR5_DSD_ADDR32	0xc0000000u
+#define XEON_B2B_BAR0_ADDR	0x1000000000000000ull
+#define XEON_B2B_BAR2_ADDR64	0x2000000000000000ull
+#define XEON_B2B_BAR4_ADDR64	0x4000000000000000ull
+#define XEON_B2B_BAR4_ADDR32	0x20000000u
+#define XEON_B2B_BAR5_ADDR32	0x40000000u
 
 /* The peer ntb secondary config space is 32KB fixed size */
 #define XEON_B2B_MIN_SIZE		0x8000