提交 8b5301c5 编写于 作者: T Thomas Renninger 提交者: Rafael J. Wysocki

platform / thinkpad: Remove deprecated hotkey_report_mode parameter

It is somewhat strange that the default value to support the
depracated interface is set (1).

Anyway this has existed for years.  The previous patch already
removed the functionality to still export events through /proc.
Now this param is useless and should vanish too.
Signed-off-by: NThomas Renninger <trenn@suse.de>
Acked-by: NMatthew Garrett <matthew.garrett@nebula.com>
Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
上级 1696d9dc
......@@ -329,20 +329,6 @@ sysfs notes:
This attribute has poll()/select() support.
hotkey_report_mode:
Returns the state of the procfs ACPI event report mode
filter for hot keys. If it is set to 1 (the default),
all hot key presses are reported both through the input
layer and also as ACPI events through procfs (but not
through netlink). If it is set to 2, hot key presses
are reported only through the input layer.
This attribute is read-only in kernels 2.6.23 or later,
and read-write on earlier kernels.
May return -EPERM (write access locked out by module
parameter) or -EACCES (read-only).
wakeup_reason:
Set to 1 if the system is waking up because the user
requested a bay ejection. Set to 2 if the system is
......@@ -518,24 +504,21 @@ SW_TABLET_MODE Tablet ThinkPads HKEY events 0x5009 and 0x500A
Non hotkey ACPI HKEY event map:
-------------------------------
Events that are not propagated by the driver, except for legacy
compatibility purposes when hotkey_report_mode is set to 1:
0x5001 Lid closed
0x5002 Lid opened
0x5009 Tablet swivel: switched to tablet mode
0x500A Tablet swivel: switched to normal mode
0x7000 Radio Switch may have changed state
Events that are never propagated by the driver:
0x2304 System is waking up from suspend to undock
0x2305 System is waking up from suspend to eject bay
0x2404 System is waking up from hibernation to undock
0x2405 System is waking up from hibernation to eject bay
0x5001 Lid closed
0x5002 Lid opened
0x5009 Tablet swivel: switched to tablet mode
0x500A Tablet swivel: switched to normal mode
0x5010 Brightness level changed/control event
0x6000 KEYBOARD: Numlock key pressed
0x6005 KEYBOARD: Fn key pressed (TO BE VERIFIED)
0x7000 Radio Switch may have changed state
Events that are propagated by the driver to userspace:
......@@ -574,50 +557,6 @@ operating system is to force either an immediate suspend or hibernate
cycle, or a system shutdown. Obviously, something is very wrong if this
happens.
Compatibility notes:
ibm-acpi and thinkpad-acpi 0.15 (mainline kernels before 2.6.23) never
supported the input layer, and sent events over the procfs ACPI event
interface.
To avoid sending duplicate events over the input layer and the ACPI
event interface, thinkpad-acpi 0.16 implements a module parameter
(hotkey_report_mode), and also a sysfs device attribute with the same
name.
Make no mistake here: userspace is expected to switch to using the input
layer interface of thinkpad-acpi, together with the ACPI netlink event
interface in kernels 2.6.23 and later, or with the ACPI procfs event
interface in kernels 2.6.22 and earlier.
If no hotkey_report_mode module parameter is specified (or it is set to
zero), the driver defaults to mode 1 (see below), and on kernels 2.6.22
and earlier, also allows one to change the hotkey_report_mode through
sysfs. In kernels 2.6.23 and later, where the netlink ACPI event
interface is available, hotkey_report_mode cannot be changed through
sysfs (it is read-only).
If the hotkey_report_mode module parameter is set to 1 or 2, it cannot
be changed later through sysfs (any writes will return -EPERM to signal
that hotkey_report_mode was locked. On 2.6.23 and later, where
hotkey_report_mode cannot be changed at all, writes will return -EACCES).
hotkey_report_mode set to 1 makes the driver export through the procfs
ACPI event interface all hot key presses (which are *also* sent to the
input layer). This is a legacy compatibility behaviour, and it is also
the default mode of operation for the driver.
hotkey_report_mode set to 2 makes the driver filter out the hot key
presses from the procfs ACPI event interface, so these events will only
be sent through the input layer. Userspace that has been updated to use
the thinkpad-acpi input layer interface should set hotkey_report_mode to
2.
Hot key press events are never sent to the ACPI netlink event interface.
Really up-to-date userspace under kernel 2.6.23 and later is to use the
netlink interface and the input layer interface, and don't bother at all
with hotkey_report_mode.
Brightness hotkey notes:
......
......@@ -2022,8 +2022,6 @@ static u32 hotkey_driver_mask; /* events needed by the driver */
static u32 hotkey_user_mask; /* events visible to userspace */
static u32 hotkey_acpi_mask; /* events enabled in firmware */
static unsigned int hotkey_report_mode;
static u16 *hotkey_keycode_map;
static struct attribute_set *hotkey_dev_attributes;
......@@ -2878,18 +2876,6 @@ static void hotkey_tablet_mode_notify_change(void)
"hotkey_tablet_mode");
}
/* sysfs hotkey report_mode -------------------------------------------- */
static ssize_t hotkey_report_mode_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
return snprintf(buf, PAGE_SIZE, "%d\n",
(hotkey_report_mode != 0) ? hotkey_report_mode : 1);
}
static struct device_attribute dev_attr_hotkey_report_mode =
__ATTR(hotkey_report_mode, S_IRUGO, hotkey_report_mode_show, NULL);
/* sysfs wakeup reason (pollable) -------------------------------------- */
static ssize_t hotkey_wakeup_reason_show(struct device *dev,
struct device_attribute *attr,
......@@ -2931,7 +2917,6 @@ static struct attribute *hotkey_attributes[] __initdata = {
&dev_attr_hotkey_enable.attr,
&dev_attr_hotkey_bios_enabled.attr,
&dev_attr_hotkey_bios_mask.attr,
&dev_attr_hotkey_report_mode.attr,
&dev_attr_hotkey_wakeup_reason.attr,
&dev_attr_hotkey_wakeup_hotunplug_complete.attr,
&dev_attr_hotkey_mask.attr,
......@@ -3435,11 +3420,6 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
"initial masks: user=0x%08x, fw=0x%08x, poll=0x%08x\n",
hotkey_user_mask, hotkey_acpi_mask, hotkey_source_mask);
dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
"legacy ibm/hotkey event reporting over procfs %s\n",
(hotkey_report_mode < 2) ?
"enabled" : "disabled");
tpacpi_inputdev->open = &hotkey_inputdev_open;
tpacpi_inputdev->close = &hotkey_inputdev_close;
......@@ -8829,11 +8809,6 @@ module_param(brightness_enable, uint, 0444);
MODULE_PARM_DESC(brightness_enable,
"Enables backlight control when 1, disables when 0");
module_param(hotkey_report_mode, uint, 0444);
MODULE_PARM_DESC(hotkey_report_mode,
"used for backwards compatibility with userspace, "
"see documentation");
#ifdef CONFIG_THINKPAD_ACPI_ALSA_SUPPORT
module_param_named(volume_mode, volume_mode, uint, 0444);
MODULE_PARM_DESC(volume_mode,
......@@ -8964,10 +8939,6 @@ static int __init thinkpad_acpi_module_init(void)
tpacpi_lifecycle = TPACPI_LIFE_INIT;
/* Parameter checking */
if (hotkey_report_mode > 2)
return -EINVAL;
/* Driver-level probe */
ret = get_thinkpad_model_data(&thinkpad_id);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册