提交 8a4d3444 编写于 作者: M Mike Marciniszyn 提交者: Doug Ledford

staging/rdma/hfi1: Determine actual operational VLs

Use shared credits and dedicated credits for each VL to determine
the actual number of operational VLs.
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>
上级 35f6befc
......@@ -10305,12 +10305,6 @@ int hfi1_set_ib_cfg(struct hfi1_pportdata *ppd, int which, u32 val)
ppd->vls_operational = val;
if (!ppd->port)
ret = -EINVAL;
else
ret = sdma_map_init(
ppd->dd,
ppd->port - 1,
val,
NULL);
}
break;
/*
......@@ -10721,12 +10715,15 @@ static void wait_for_vl_status_clear(struct hfi1_devdata *dd, u64 mask,
* raise = if the new limit is higher than the current value (may be changed
* earlier in the algorithm), set the new limit to the new value
*/
int set_buffer_control(struct hfi1_devdata *dd, struct buffer_control *new_bc)
int set_buffer_control(struct hfi1_pportdata *ppd,
struct buffer_control *new_bc)
{
struct hfi1_devdata *dd = ppd->dd;
u64 changing_mask, ld_mask, stat_mask;
int change_count;
int i, use_all_mask;
int this_shared_changing;
int vl_count = 0, ret;
/*
* A0: add the variable any_shared_limit_changing below and in the
* algorithm above. If removing A0 support, it can be removed.
......@@ -10878,6 +10875,28 @@ int set_buffer_control(struct hfi1_devdata *dd, struct buffer_control *new_bc)
/* bracket the credit change with a total adjustment */
if (new_total < cur_total)
set_global_limit(dd, new_total);
/*
* Determine the actual number of operational VLS using the number of
* dedicated and shared credits for each VL.
*/
if (change_count > 0) {
for (i = 0; i < TXE_NUM_DATA_VL; i++)
if (be16_to_cpu(new_bc->vl[i].dedicated) > 0 ||
be16_to_cpu(new_bc->vl[i].shared) > 0)
vl_count++;
ppd->actual_vls_operational = vl_count;
ret = sdma_map_init(dd, ppd->port - 1, vl_count ?
ppd->actual_vls_operational :
ppd->vls_operational,
NULL);
if (ret == 0)
ret = pio_map_init(dd, ppd->port - 1, vl_count ?
ppd->actual_vls_operational :
ppd->vls_operational, NULL);
if (ret)
return ret;
}
return 0;
}
......@@ -10969,7 +10988,7 @@ int fm_set_table(struct hfi1_pportdata *ppd, int which, void *t)
VL_ARB_LOW_PRIO_TABLE_SIZE, t);
break;
case FM_TBL_BUFFER_CONTROL:
ret = set_buffer_control(ppd->dd, t);
ret = set_buffer_control(ppd, t);
break;
case FM_TBL_SC2VLNT:
set_sc2vlnt(ppd->dd, t);
......@@ -13990,6 +14009,7 @@ struct hfi1_devdata *hfi1_init_dd(struct pci_dev *pdev,
}
ppd->vls_supported = num_vls;
ppd->vls_operational = ppd->vls_supported;
ppd->actual_vls_operational = ppd->vls_supported;
/* Set the default MTU. */
for (vl = 0; vl < num_vls; vl++)
dd->vld[vl].mtu = hfi1_max_mtu;
......@@ -14074,6 +14094,7 @@ struct hfi1_devdata *hfi1_init_dd(struct pci_dev *pdev,
num_vls, dd->chip_sdma_engines);
num_vls = dd->chip_sdma_engines;
ppd->vls_supported = dd->chip_sdma_engines;
ppd->vls_operational = ppd->vls_supported;
}
/*
......
......@@ -1017,7 +1017,7 @@ static long hfi1_assign_snoop_link_credits(struct hfi1_pportdata *ppd,
t.vl[i].dedicated = be_per_vl_credits;
t.vl[15].dedicated = cpu_to_be16(vl15_credits);
return set_buffer_control(ppd->dd, &t);
return set_buffer_control(ppd, &t);
err_exit:
snoop_dbg("port_state = 0x%x, total_credits = %d, vl15_credits = %d",
......
......@@ -644,6 +644,7 @@ struct hfi1_pportdata {
u16 link_speed_active;
u8 vls_supported;
u8 vls_operational;
u8 actual_vls_operational;
/* LID mask control */
u8 lmc;
/* Rx Polarity inversion (compensate for ~tx on partner) */
......@@ -1522,7 +1523,7 @@ int snoop_send_pio_handler(struct rvt_qp *qp, struct hfi1_pkt_state *ps,
u64 pbc);
void snoop_inline_pio_send(struct hfi1_devdata *dd, struct pio_buf *pbuf,
u64 pbc, const void *from, size_t count);
int set_buffer_control(struct hfi1_devdata *dd, struct buffer_control *bc);
int set_buffer_control(struct hfi1_pportdata *ppd, struct buffer_control *bc);
static inline struct hfi1_devdata *dd_from_ppd(struct hfi1_pportdata *ppd)
{
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册