提交 8a1f936a 编写于 作者: P Peter Ujfalusi 提交者: Mark Brown

ASoC: TWL4030: Add 4 channel TDM support

Support for 4 channel TDM (SND_SOC_DAIFMT_DSP_A) for twl4030
codec.
The channel allocations are:
Playback:
TDM         i2s   TWL RX
Channel 1   Left  SDRL2
Channel 3   Right SDRR2
Channel 2   --    SDRL1
Channel 4   --    SDRR1

Capture:
TDM         i2s   TWL TX
Channel 1   Left  TXL1
Channel 3   Right TXR1
Channel 2   --    TXL2
Channel 4   --    TXR2
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
上级 31a00c6b
......@@ -1251,6 +1251,28 @@ static void twl4030_constraints(struct twl4030_priv *twl4030,
twl4030->channels);
}
/* In case of 4 channel mode, the RX1 L/R for playback and the TX2 L/R for
* capture has to be enabled/disabled. */
static void twl4030_tdm_enable(struct snd_soc_codec *codec, int direction,
int enable)
{
u8 reg, mask;
reg = twl4030_read_reg_cache(codec, TWL4030_REG_OPTION);
if (direction == SNDRV_PCM_STREAM_PLAYBACK)
mask = TWL4030_ARXL1_VRX_EN | TWL4030_ARXR1_EN;
else
mask = TWL4030_ATXL2_VTXL_EN | TWL4030_ATXR2_VTXR_EN;
if (enable)
reg |= mask;
else
reg &= ~mask;
twl4030_write(codec, TWL4030_REG_OPTION, reg);
}
static int twl4030_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
......@@ -1267,6 +1289,15 @@ static int twl4030_startup(struct snd_pcm_substream *substream,
if (twl4030->configured)
twl4030_constraints(twl4030, twl4030->master_substream);
} else {
if (!(twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE) &
TWL4030_OPTION_1)) {
/* In option2 4 channel is not supported, set the
* constraint for the first stream for channels, the
* second stream will 'inherit' this cosntraint */
snd_pcm_hw_constraint_minmax(substream->runtime,
SNDRV_PCM_HW_PARAM_CHANNELS,
2, 2);
}
twl4030->master_substream = substream;
}
......@@ -1292,6 +1323,10 @@ static void twl4030_shutdown(struct snd_pcm_substream *substream,
twl4030->configured = 0;
else if (!twl4030->master_substream->runtime->channels)
twl4030->configured = 0;
/* If the closing substream had 4 channel, do the necessary cleanup */
if (substream->runtime->channels == 4)
twl4030_tdm_enable(codec, substream->stream, 0);
}
static int twl4030_hw_params(struct snd_pcm_substream *substream,
......@@ -1304,6 +1339,16 @@ static int twl4030_hw_params(struct snd_pcm_substream *substream,
struct twl4030_priv *twl4030 = codec->private_data;
u8 mode, old_mode, format, old_format;
/* If the substream has 4 channel, do the necessary setup */
if (params_channels(params) == 4) {
/* Safety check: are we in the correct operating mode? */
if ((twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE) &
TWL4030_OPTION_1))
twl4030_tdm_enable(codec, substream->stream, 1);
else
return -EINVAL;
}
if (twl4030->configured)
/* Ignoring hw_params for already configured DAI */
return 0;
......@@ -1461,6 +1506,9 @@ static int twl4030_set_dai_fmt(struct snd_soc_dai *codec_dai,
case SND_SOC_DAIFMT_I2S:
format |= TWL4030_AIF_FORMAT_CODEC;
break;
case SND_SOC_DAIFMT_DSP_A:
format |= TWL4030_AIF_FORMAT_TDM;
break;
default:
return -EINVAL;
}
......@@ -1642,13 +1690,13 @@ struct snd_soc_dai twl4030_dai[] = {
.playback = {
.stream_name = "Playback",
.channels_min = 2,
.channels_max = 2,
.channels_max = 4,
.rates = TWL4030_RATES | SNDRV_PCM_RATE_96000,
.formats = TWL4030_FORMATS,},
.capture = {
.stream_name = "Capture",
.channels_min = 2,
.channels_max = 2,
.channels_max = 4,
.rates = TWL4030_RATES,
.formats = TWL4030_FORMATS,},
.ops = &twl4030_dai_ops,
......
......@@ -116,6 +116,17 @@
#define TWL4030_OPTION_1 (1 << 0)
#define TWL4030_OPTION_2 (0 << 0)
/* TWL4030_OPTION (0x02) Fields */
#define TWL4030_ATXL1_EN (1 << 0)
#define TWL4030_ATXR1_EN (1 << 1)
#define TWL4030_ATXL2_VTXL_EN (1 << 2)
#define TWL4030_ATXR2_VTXR_EN (1 << 3)
#define TWL4030_ARXL1_VRX_EN (1 << 4)
#define TWL4030_ARXR1_EN (1 << 5)
#define TWL4030_ARXL2_EN (1 << 6)
#define TWL4030_ARXR2_EN (1 << 7)
/* TWL4030_REG_MICBIAS_CTL (0x04) Fields */
#define TWL4030_MICBIAS2_CTL 0x40
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册