提交 8a13ecd7 编写于 作者: R Ralf Baechle

[MIPS] IP32: Fixes after interrupt renumbering.

And general untangling.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 725d7b36
...@@ -40,13 +40,6 @@ static void inline flush_mace_bus(void) ...@@ -40,13 +40,6 @@ static void inline flush_mace_bus(void)
mace->perif.ctrl.misc; mace->perif.ctrl.misc;
} }
#undef DEBUG_IRQ
#ifdef DEBUG_IRQ
#define DBG(x...) printk(x)
#else
#define DBG(x...)
#endif
/* /*
* O2 irq map * O2 irq map
* *
...@@ -125,6 +118,7 @@ struct irqaction memerr_irq = { ...@@ -125,6 +118,7 @@ struct irqaction memerr_irq = {
.mask = CPU_MASK_NONE, .mask = CPU_MASK_NONE,
.name = "CRIME memory error", .name = "CRIME memory error",
}; };
struct irqaction cpuerr_irq = { struct irqaction cpuerr_irq = {
.handler = crime_cpuerr_intr, .handler = crime_cpuerr_intr,
.flags = IRQF_DISABLED, .flags = IRQF_DISABLED,
...@@ -139,46 +133,70 @@ struct irqaction cpuerr_irq = { ...@@ -139,46 +133,70 @@ struct irqaction cpuerr_irq = {
static uint64_t crime_mask; static uint64_t crime_mask;
static void enable_crime_irq(unsigned int irq) static inline void crime_enable_irq(unsigned int irq)
{ {
crime_mask |= 1 << (irq - 1); unsigned int bit = irq - CRIME_IRQ_BASE;
crime_mask |= 1 << bit;
crime->imask = crime_mask; crime->imask = crime_mask;
} }
static void disable_crime_irq(unsigned int irq) static inline void crime_disable_irq(unsigned int irq)
{ {
crime_mask &= ~(1 << (irq - 1)); unsigned int bit = irq - CRIME_IRQ_BASE;
crime_mask &= ~(1 << bit);
crime->imask = crime_mask; crime->imask = crime_mask;
flush_crime_bus(); flush_crime_bus();
} }
static void mask_and_ack_crime_irq(unsigned int irq) static void crime_level_mask_and_ack_irq(unsigned int irq)
{
crime_disable_irq(irq);
}
static void crime_level_end_irq(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
crime_enable_irq(irq);
}
static struct irq_chip crime_level_interrupt = {
.name = "IP32 CRIME",
.ack = crime_level_mask_and_ack_irq,
.mask = crime_disable_irq,
.mask_ack = crime_level_mask_and_ack_irq,
.unmask = crime_enable_irq,
.end = crime_level_end_irq,
};
static void crime_edge_mask_and_ack_irq(unsigned int irq)
{ {
unsigned int bit = irq - CRIME_IRQ_BASE;
uint64_t crime_int;
/* Edge triggered interrupts must be cleared. */ /* Edge triggered interrupts must be cleared. */
if ((irq >= CRIME_GBE0_IRQ && irq <= CRIME_GBE3_IRQ)
|| (irq >= CRIME_RE_EMPTY_E_IRQ && irq <= CRIME_RE_IDLE_E_IRQ) crime_int = crime->hard_int;
|| (irq >= CRIME_SOFT0_IRQ && irq <= CRIME_SOFT2_IRQ)) { crime_int &= ~(1 << bit);
uint64_t crime_int; crime->hard_int = crime_int;
crime_int = crime->hard_int;
crime_int &= ~(1 << (irq - 1)); crime_disable_irq(irq);
crime->hard_int = crime_int;
}
disable_crime_irq(irq);
} }
static void end_crime_irq(unsigned int irq) static void crime_edge_end_irq(unsigned int irq)
{ {
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
enable_crime_irq(irq); crime_enable_irq(irq);
} }
static struct irq_chip ip32_crime_interrupt = { static struct irq_chip crime_edge_interrupt = {
.name = "IP32 CRIME", .name = "IP32 CRIME",
.ack = mask_and_ack_crime_irq, .ack = crime_edge_mask_and_ack_irq,
.mask = disable_crime_irq, .mask = crime_disable_irq,
.mask_ack = mask_and_ack_crime_irq, .mask_ack = crime_edge_mask_and_ack_irq,
.unmask = enable_crime_irq, .unmask = crime_enable_irq,
.end = end_crime_irq, .end = crime_edge_end_irq,
}; };
/* /*
...@@ -265,7 +283,7 @@ static void enable_maceisa_irq(unsigned int irq) ...@@ -265,7 +283,7 @@ static void enable_maceisa_irq(unsigned int irq)
{ {
unsigned int crime_int = 0; unsigned int crime_int = 0;
DBG("maceisa enable: %u\n", irq); pr_debug("maceisa enable: %u\n", irq);
switch (irq) { switch (irq) {
case MACEISA_AUDIO_SW_IRQ ... MACEISA_AUDIO3_MERR_IRQ: case MACEISA_AUDIO_SW_IRQ ... MACEISA_AUDIO3_MERR_IRQ:
...@@ -278,7 +296,7 @@ static void enable_maceisa_irq(unsigned int irq) ...@@ -278,7 +296,7 @@ static void enable_maceisa_irq(unsigned int irq)
crime_int = MACE_SUPERIO_INT; crime_int = MACE_SUPERIO_INT;
break; break;
} }
DBG("crime_int %08x enabled\n", crime_int); pr_debug("crime_int %08x enabled\n", crime_int);
crime_mask |= crime_int; crime_mask |= crime_int;
crime->imask = crime_mask; crime->imask = crime_mask;
maceisa_mask |= 1 << (irq - 33); maceisa_mask |= 1 << (irq - 33);
...@@ -290,11 +308,11 @@ static void disable_maceisa_irq(unsigned int irq) ...@@ -290,11 +308,11 @@ static void disable_maceisa_irq(unsigned int irq)
unsigned int crime_int = 0; unsigned int crime_int = 0;
maceisa_mask &= ~(1 << (irq - 33)); maceisa_mask &= ~(1 << (irq - 33));
if(!(maceisa_mask & MACEISA_AUDIO_INT)) if (!(maceisa_mask & MACEISA_AUDIO_INT))
crime_int |= MACE_AUDIO_INT; crime_int |= MACE_AUDIO_INT;
if(!(maceisa_mask & MACEISA_MISC_INT)) if (!(maceisa_mask & MACEISA_MISC_INT))
crime_int |= MACE_MISC_INT; crime_int |= MACE_MISC_INT;
if(!(maceisa_mask & MACEISA_SUPERIO_INT)) if (!(maceisa_mask & MACEISA_SUPERIO_INT))
crime_int |= MACE_SUPERIO_INT; crime_int |= MACE_SUPERIO_INT;
crime_mask &= ~crime_int; crime_mask &= ~crime_int;
crime->imask = crime_mask; crime->imask = crime_mask;
...@@ -327,12 +345,12 @@ static void end_maceisa_irq(unsigned irq) ...@@ -327,12 +345,12 @@ static void end_maceisa_irq(unsigned irq)
} }
static struct irq_chip ip32_maceisa_interrupt = { static struct irq_chip ip32_maceisa_interrupt = {
.name = "IP32 MACE ISA", .name = "IP32 MACE ISA",
.ack = mask_and_ack_maceisa_irq, .ack = mask_and_ack_maceisa_irq,
.mask = disable_maceisa_irq, .mask = disable_maceisa_irq,
.mask_ack = mask_and_ack_maceisa_irq, .mask_ack = mask_and_ack_maceisa_irq,
.unmask = enable_maceisa_irq, .unmask = enable_maceisa_irq,
.end = end_maceisa_irq, .end = end_maceisa_irq,
}; };
/* This is used for regular non-ISA, non-PCI MACE interrupts. That means /* This is used for regular non-ISA, non-PCI MACE interrupts. That means
...@@ -411,7 +429,7 @@ static void ip32_irq0(void) ...@@ -411,7 +429,7 @@ static void ip32_irq0(void)
irq = __ffs(mace_int & maceisa_mask) + MACEISA_AUDIO_SW_IRQ; irq = __ffs(mace_int & maceisa_mask) + MACEISA_AUDIO_SW_IRQ;
} }
DBG("*irq %u*\n", irq); pr_debug("*irq %u*\n", irq);
do_IRQ(irq); do_IRQ(irq);
} }
...@@ -472,23 +490,31 @@ void __init arch_init_irq(void) ...@@ -472,23 +490,31 @@ void __init arch_init_irq(void)
mips_cpu_irq_init(); mips_cpu_irq_init();
for (irq = MIPS_CPU_IRQ_BASE + 8; irq <= IP32_IRQ_MAX; irq++) { for (irq = MIPS_CPU_IRQ_BASE + 8; irq <= IP32_IRQ_MAX; irq++) {
struct irq_chip *chip;
switch (irq) { switch (irq) {
case MACE_VID_IN1_IRQ ... MACE_PCI_BRIDGE_IRQ: case MACE_VID_IN1_IRQ ... MACE_PCI_BRIDGE_IRQ:
chip = &ip32_mace_interrupt; set_irq_chip(irq, &ip32_mace_interrupt);
break; break;
case MACEPCI_SCSI0_IRQ ... MACEPCI_SHARED2_IRQ: case MACEPCI_SCSI0_IRQ ... MACEPCI_SHARED2_IRQ:
chip = &ip32_macepci_interrupt; set_irq_chip(irq, &ip32_macepci_interrupt);
break;
case CRIME_GBE0_IRQ ... CRIME_GBE3_IRQ:
set_irq_chip(irq, &crime_edge_interrupt);
break;
case CRIME_CPUERR_IRQ:
case CRIME_MEMERR_IRQ:
set_irq_chip(irq, &crime_level_interrupt);
break; break;
case CRIME_GBE0_IRQ ... CRIME_VICE_IRQ: case CRIME_RE_EMPTY_E_IRQ ... CRIME_RE_IDLE_E_IRQ:
chip = &ip32_crime_interrupt; case CRIME_SOFT0_IRQ ... CRIME_SOFT2_IRQ:
set_irq_chip(irq, &crime_edge_interrupt);
break;
case CRIME_VICE_IRQ:
set_irq_chip(irq, &crime_edge_interrupt);
break; break;
default: default:
chip = &ip32_maceisa_interrupt; set_irq_chip(irq, &ip32_maceisa_interrupt);
break;
} }
set_irq_chip(irq, chip);
} }
setup_irq(CRIME_MEMERR_IRQ, &memerr_irq); setup_irq(CRIME_MEMERR_IRQ, &memerr_irq);
setup_irq(CRIME_CPUERR_IRQ, &cpuerr_irq); setup_irq(CRIME_CPUERR_IRQ, &cpuerr_irq);
......
...@@ -22,10 +22,12 @@ enum ip32_irq_no { ...@@ -22,10 +22,12 @@ enum ip32_irq_no {
* CPU interrupts are 0 ... 7 * CPU interrupts are 0 ... 7
*/ */
CRIME_IRQ_BASE = MIPS_CPU_IRQ_BASE,
/* /*
* MACE * MACE
*/ */
MACE_VID_IN1_IRQ = MIPS_CPU_IRQ_BASE + 8, MACE_VID_IN1_IRQ = CRIME_IRQ_BASE,
MACE_VID_IN2_IRQ, MACE_VID_IN2_IRQ,
MACE_VID_OUT_IRQ, MACE_VID_OUT_IRQ,
MACE_ETHERNET_IRQ, MACE_ETHERNET_IRQ,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册