提交 89d777a5 编写于 作者: J Jordan Crouse 提交者: Rob Clark

drm/msm: Remove 'src_clk' from adreno configuration

The adreno code inherited a silly workaround from downstream
from the bad old days before decent clock control. grp_clk[0]
(named 'src_clk') doesn't actually exist - it was used as a proxy
for whatever the core clock actually was (usually 'core_clk').

All targets should be able to correctly request 'core_clk' and
get the right thing back so zap the anachronism and directly
use grp_clk[0] to control the clock rate.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>
上级 05b9401b
......@@ -91,21 +91,16 @@ static int disable_pwrrail(struct msm_gpu *gpu)
static int enable_clk(struct msm_gpu *gpu)
{
struct clk *rate_clk = NULL;
int i;
/* NOTE: kgsl_pwrctrl_clk() ignores grp_clks[0].. */
for (i = ARRAY_SIZE(gpu->grp_clks) - 1; i > 0; i--) {
if (gpu->grp_clks[i]) {
clk_prepare(gpu->grp_clks[i]);
rate_clk = gpu->grp_clks[i];
}
}
if (gpu->grp_clks[0] && gpu->fast_rate)
clk_set_rate(gpu->grp_clks[0], gpu->fast_rate);
if (rate_clk && gpu->fast_rate)
clk_set_rate(rate_clk, gpu->fast_rate);
for (i = ARRAY_SIZE(gpu->grp_clks) - 1; i >= 0; i--)
if (gpu->grp_clks[i])
clk_prepare(gpu->grp_clks[i]);
for (i = ARRAY_SIZE(gpu->grp_clks) - 1; i > 0; i--)
for (i = ARRAY_SIZE(gpu->grp_clks) - 1; i >= 0; i--)
if (gpu->grp_clks[i])
clk_enable(gpu->grp_clks[i]);
......@@ -114,24 +109,19 @@ static int enable_clk(struct msm_gpu *gpu)
static int disable_clk(struct msm_gpu *gpu)
{
struct clk *rate_clk = NULL;
int i;
/* NOTE: kgsl_pwrctrl_clk() ignores grp_clks[0].. */
for (i = ARRAY_SIZE(gpu->grp_clks) - 1; i > 0; i--) {
if (gpu->grp_clks[i]) {
for (i = ARRAY_SIZE(gpu->grp_clks) - 1; i >= 0; i--)
if (gpu->grp_clks[i])
clk_disable(gpu->grp_clks[i]);
rate_clk = gpu->grp_clks[i];
}
}
if (rate_clk && gpu->slow_rate)
clk_set_rate(rate_clk, gpu->slow_rate);
for (i = ARRAY_SIZE(gpu->grp_clks) - 1; i > 0; i--)
for (i = ARRAY_SIZE(gpu->grp_clks) - 1; i >= 0; i--)
if (gpu->grp_clks[i])
clk_unprepare(gpu->grp_clks[i]);
if (gpu->grp_clks[0] && gpu->slow_rate)
clk_set_rate(gpu->grp_clks[0], gpu->slow_rate);
return 0;
}
......@@ -563,7 +553,7 @@ static irqreturn_t irq_handler(int irq, void *data)
}
static const char *clk_names[] = {
"src_clk", "core_clk", "iface_clk", "mem_clk", "mem_iface_clk",
"core_clk", "iface_clk", "mem_clk", "mem_iface_clk",
"alt_mem_iface_clk",
};
......
......@@ -103,7 +103,7 @@ struct msm_gpu {
/* Power Control: */
struct regulator *gpu_reg, *gpu_cx;
struct clk *ebi1_clk, *grp_clks[6];
struct clk *ebi1_clk, *grp_clks[5];
uint32_t fast_rate, slow_rate, bus_freq;
#ifdef DOWNSTREAM_CONFIG_MSM_BUS_SCALING
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册