提交 897cfcd8 编写于 作者: M Magnus Damm 提交者: Paul Mundt

sh: intc - rework higlander irq code for r7780mp and r7785rp

This patch reworks the highlander irq code for r7780mp and r7785rp.
The same strategy as for the new R2D code is used here - the board
specific interrupts are now starting from HL_FPGA_IRQ_BASE. The code
for r7780rp is not touched due to lack of hardware.

Tested with CF, AX88796 on r7780mp and r7785rp. The touch switch
interrupt has also been tested on r7780mp.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 5cbc3af5
#
# Makefile for the R7780RP-1 specific parts of the kernel
#
irqinit-y := irq-r7780rp.o
irqinit-$(CONFIG_SH_R7780MP) := irq-r7780mp.o
irqinit-$(CONFIG_SH_R7785RP) := irq-r7785rp.o
obj-y := setup.o irq.o $(irqinit-y)
irqinit-$(CONFIG_SH_R7780RP) := irq-r7780rp.o irq.o
obj-y := setup.o $(irqinit-y)
ifneq ($(CONFIG_SH_R7785RP),y)
obj-$(CONFIG_PUSH_SWITCH) += psw.o
......
/*
* Renesas Solutions Highlander R7780MP Support.
*
* Copyright (C) 2002 Atom Create Engineering Co., Ltd.
* Copyright (C) 2006 Paul Mundt
* Copyright (C) 2007 Magnus Damm
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/r7780rp.h>
enum {
UNUSED = 0,
/* board specific interrupt sources */
AX88796, /* Ethernet controller */
CF, /* Compact Flash */
PSW, /* Push Switch */
EXT1, /* EXT1n IRQ */
EXT4, /* EXT4n IRQ */
};
static struct intc_vect vectors[] __initdata = {
INTC_IRQ(CF, IRQ_CF),
INTC_IRQ(PSW, IRQ_PSW),
INTC_IRQ(AX88796, IRQ_AX88796),
INTC_IRQ(EXT1, IRQ_EXT1),
INTC_IRQ(EXT4, IRQ_EXT4),
};
static struct intc_mask_reg mask_registers[] __initdata = {
{ 0xa4000000, 0, 16, /* IRLMSK */
{ 0, 0, 0, 0, CF, 0, 0, 0,
0, 0, 0, EXT4, 0, EXT1, PSW, AX88796 } },
};
static unsigned char irl2irq[HL_NR_IRL] __initdata = {
0, IRQ_CF, 0, 0,
0, 0, 0, 0,
0, IRQ_EXT4, 0, IRQ_EXT1,
0, IRQ_AX88796, IRQ_PSW,
};
static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors,
NULL, NULL, mask_registers, NULL, NULL);
unsigned char * __init highlander_init_irq_r7780mp(void)
{
if ((ctrl_inw(0xa4000700) & 0xf000) == 0x2000) {
printk(KERN_INFO "Using r7780mp interrupt controller.\n");
register_intc_controller(&intc_desc);
return irl2irq;
}
return NULL;
}
......@@ -9,13 +9,14 @@
* for more details.
*/
#include <linux/init.h>
#include <asm/io.h>
#include <asm/r7780rp.h>
void __init highlander_init_irq(void)
unsigned char * __init highlander_init_irq_r7780rp(void)
{
int i;
for (i = 0; i < 15; i++)
make_r7780rp_irq(i);
return NULL;
}
/*
* Renesas Solutions Highlander R7780RP-1 Support.
* Renesas Solutions Highlander R7785RP Support.
*
* Copyright (C) 2002 Atom Create Engineering Co., Ltd.
* Copyright (C) 2006 Paul Mundt
* Copyright (C) 2007 Magnus Damm
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <asm/io.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/r7780rp.h>
void __init highlander_init_irq(void)
enum {
UNUSED = 0,
/* board specific interrupt sources */
AX88796, /* Ethernet controller */
CF, /* Compact Flash */
};
static struct intc_vect vectors[] __initdata = {
INTC_IRQ(CF, IRQ_CF),
INTC_IRQ(AX88796, IRQ_AX88796),
};
static struct intc_mask_reg mask_registers[] __initdata = {
{ 0xa4000010, 0, 16, /* IRLMCR1 */
{ 0, 0, 0, 0, CF, AX88796, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0 } },
};
static unsigned char irl2irq[HL_NR_IRL] __initdata = {
0, IRQ_CF, 0, 0,
0, 0, 0, 0,
0, 0, IRQ_AX88796, 0,
0, 0, 0,
};
static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors,
NULL, NULL, mask_registers, NULL, NULL);
unsigned char * __init highlander_init_irq_r7785rp(void)
{
if ((ctrl_inw(0xa4000158) & 0xf000) != 0x1000)
return NULL;
printk(KERN_INFO "Using r7785rp interrupt controller.\n");
ctrl_outw(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */
/* Setup the FPGA IRL */
......@@ -24,6 +60,6 @@ void __init highlander_init_irq(void)
ctrl_outw(0x4321, PA_IRLPRE); /* FPGA IRLE */
ctrl_outw(0x0000, PA_IRLPRF); /* FPGA IRLF */
make_r7780rp_irq(1); /* CF card */
make_r7780rp_irq(10); /* On-board ethernet */
register_intc_controller(&intc_desc);
return irl2irq;
}
......@@ -31,8 +31,8 @@ static struct resource r8a66597_usb_host_resources[] = {
},
[1] = {
.name = "r8a66597_hcd",
.start = 11, /* irq number */
.end = 11,
.start = IRQ_EXT1, /* irq number */
.end = IRQ_EXT1,
.flags = IORESOURCE_IRQ,
},
};
......@@ -57,8 +57,8 @@ static struct resource m66592_usb_peripheral_resources[] = {
},
[1] = {
.name = "m66592_udc",
.start = 9, /* irq number */
.end = 9,
.start = IRQ_EXT4, /* irq number */
.end = IRQ_EXT4,
.flags = IORESOURCE_IRQ,
},
};
......@@ -86,11 +86,7 @@ static struct resource cf_ide_resources[] = {
.flags = IORESOURCE_MEM,
},
[2] = {
#ifdef CONFIG_SH_R7780RP
.start = 4,
#else
.start = 1,
#endif
.start = IRQ_CF,
.flags = IORESOURCE_IRQ,
},
};
......@@ -225,12 +221,50 @@ static void __init highlander_setup(char **cmdline_p)
pm_power_off = r7780rp_power_off;
}
static unsigned char irl2irq[HL_NR_IRL];
int highlander_irq_demux(int irq)
{
if (irq >= HL_NR_IRL || !irl2irq[irq])
return irq;
return irl2irq[irq];
}
void __init highlander_init_irq(void)
{
unsigned char *ucp = NULL;
do {
#ifdef CONFIG_SH_R7780MP
ucp = highlander_init_irq_r7780mp();
if (ucp)
break;
#endif
#ifdef CONFIG_SH_R7785RP
ucp = highlander_init_irq_r7785rp();
if (ucp)
break;
#endif
#ifdef CONFIG_SH_R7780RP
highlander_init_irq_r7780rp();
ucp = irl2irq;
break;
#endif
} while (0);
if (ucp) {
plat_irq_setup_pins(IRQ_MODE_IRL3210);
memcpy(irl2irq, ucp, HL_NR_IRL);
}
}
/*
* The Machine Vector
*/
static struct sh_machine_vector mv_highlander __initmv = {
.mv_name = "Highlander",
.mv_nr_irqs = 109,
.mv_setup = highlander_setup,
.mv_init_irq = highlander_init_irq,
.mv_irq_demux = highlander_irq_demux,
};
......@@ -65,24 +65,6 @@
#define PA_PMR (PA_BCR+0x0900) /* */
#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
#define IRQ_PCISLOT1 65 /* PCI Slot #1 IRQ */
#define IRQ_PCISLOT2 66 /* PCI Slot #2 IRQ */
#define IRQ_PCISLOT3 67 /* PCI Slot #3 IRQ */
#define IRQ_PCISLOT4 68 /* PCI Slot #4 IRQ */
#define IRQ_TP 2 /* Touch Panel IRQ */
#define IRQ_SCI1 3 /* SCI1 IRQ */
#define IRQ_SCI0 4 /* SCI0 IRQ */
#define IRQ_2SERIAL 5 /* Serial IRQ */
#define IRQ_RTC 6 /* RTC A / B IRQ */
#define IRQ_EXTENTION6 7 /* EXT6n IRQ */
#define IRQ_EXTENTION5 8 /* EXT5n IRQ */
#define IRQ_EXTENTION4 9 /* EXT4n IRQ */
#define IRQ_EXTENTION2 10 /* EXT2n IRQ */
#define IRQ_EXTENTION1 11 /* EXT1n IRQ */
#define IRQ_ONETH 13 /* On board Ethernet IRQ */
#define IRQ_PSW 14 /* Push Switch IRQ */
#define IVDR_CK_ON 8 /* iVDR Clock ON */
#elif defined(CONFIG_SH_R7780RP)
......@@ -203,11 +185,24 @@
#define PA_MMSR (PA_BCR+0x0400)
#define IVDR_CK_ON 4 /* iVDR Clock ON */
#endif
#define HL_FPGA_IRQ_BASE 200
#define HL_NR_IRL 15
#define IRQ_AX88796 (HL_FPGA_IRQ_BASE + 0)
#define IRQ_CF (HL_FPGA_IRQ_BASE + 1)
#ifndef IRQ_PSW
#define IRQ_PSW (HL_FPGA_IRQ_BASE + 2)
#endif
#define IRQ_EXT1 (HL_FPGA_IRQ_BASE + 3)
#define IRQ_EXT4 (HL_FPGA_IRQ_BASE + 4)
void make_r7780rp_irq(unsigned int irq);
void highlander_init_irq(void);
unsigned char *highlander_init_irq_r7780mp(void);
unsigned char *highlander_init_irq_r7780rp(void);
unsigned char *highlander_init_irq_r7785rp(void);
#define __IO_PREFIX r7780rp
#include <asm/io_generic.h>
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册