提交 89747c91 编写于 作者: B Bryan Wu 提交者: Tomi Valkeinen

OMAP: use generic DPI panel driver in board files

Still keep sharp_ls_panel, since the sharp_ls_panel driver contains blacklight
control driver code which will be moved out later. Then we can use generic DPI
driver for sharp_ls_panel.
Signed-off-by: NBryan Wu <bryan.wu@canonical.com>
Acked-by: NArchit Taneja <archit@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@nokia.com>
上级 a9a62b6a
......@@ -38,6 +38,7 @@
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <plat/display.h>
#include <plat/panel-generic-dpi.h>
#include <plat/gpmc-smc91x.h>
......@@ -270,13 +271,18 @@ static struct omap_dss_device sdp3430_lcd_device = {
.platform_disable = sdp3430_panel_disable_lcd,
};
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
.platform_enable = sdp3430_panel_enable_dvi,
.platform_disable = sdp3430_panel_disable_dvi,
};
static struct omap_dss_device sdp3430_dvi_device = {
.name = "dvi",
.driver_name = "generic_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
.platform_enable = sdp3430_panel_enable_dvi,
.platform_disable = sdp3430_panel_disable_dvi,
};
static struct omap_dss_device sdp3430_tv_device = {
......
......@@ -35,6 +35,7 @@
#include <plat/common.h>
#include <plat/usb.h>
#include <plat/display.h>
#include <plat/panel-generic-dpi.h>
#include "mux.h"
#include "control.h"
......@@ -303,13 +304,18 @@ static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev)
lcd_enabled = 0;
}
static struct panel_generic_dpi_data lcd_panel = {
.name = "sharp_lq",
.platform_enable = am3517_evm_panel_enable_lcd,
.platform_disable = am3517_evm_panel_disable_lcd,
};
static struct omap_dss_device am3517_evm_lcd_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "lcd",
.driver_name = "sharp_lq_panel",
.driver_name = "generic_dpi_panel",
.data = &lcd_panel,
.phy.dpi.data_lines = 16,
.platform_enable = am3517_evm_panel_enable_lcd,
.platform_disable = am3517_evm_panel_disable_lcd,
};
static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev)
......@@ -346,13 +352,18 @@ static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
dvi_enabled = 0;
}
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
.platform_enable = am3517_evm_panel_enable_dvi,
.platform_disable = am3517_evm_panel_disable_dvi,
};
static struct omap_dss_device am3517_evm_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
.driver_name = "generic_panel",
.driver_name = "generic_dpi_panel",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
.platform_enable = am3517_evm_panel_enable_dvi,
.platform_disable = am3517_evm_panel_disable_dvi,
};
static struct omap_dss_device *am3517_evm_dss_devices[] = {
......
......@@ -46,6 +46,7 @@
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <plat/display.h>
#include <plat/panel-generic-dpi.h>
#include <plat/mcspi.h>
#include <mach/hardware.h>
......@@ -351,22 +352,32 @@ static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev)
{
}
static struct panel_generic_dpi_data lcd_panel = {
.name = "toppoly_tdo35s",
.platform_enable = cm_t35_panel_enable_lcd,
.platform_disable = cm_t35_panel_disable_lcd,
};
static struct omap_dss_device cm_t35_lcd_device = {
.name = "lcd",
.driver_name = "toppoly_tdo35s_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.data = &lcd_panel,
.phy.dpi.data_lines = 18,
.platform_enable = cm_t35_panel_enable_lcd,
.platform_disable = cm_t35_panel_disable_lcd,
};
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
.platform_enable = cm_t35_panel_enable_dvi,
.platform_disable = cm_t35_panel_disable_dvi,
};
static struct omap_dss_device cm_t35_dvi_device = {
.name = "dvi",
.driver_name = "generic_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
.platform_enable = cm_t35_panel_enable_dvi,
.platform_disable = cm_t35_panel_disable_dvi,
};
static struct omap_dss_device cm_t35_tv_device = {
......
......@@ -46,6 +46,7 @@
#include <plat/nand.h>
#include <plat/usb.h>
#include <plat/display.h>
#include <plat/panel-generic-dpi.h>
#include <plat/mcspi.h>
#include <linux/input/matrix_keypad.h>
......@@ -149,23 +150,32 @@ static struct regulator_consumer_supply devkit8000_vmmc1_supply =
static struct regulator_consumer_supply devkit8000_vio_supply =
REGULATOR_SUPPLY("vcc", "spi2.0");
static struct panel_generic_dpi_data lcd_panel = {
.name = "generic",
.platform_enable = devkit8000_panel_enable_lcd,
.platform_disable = devkit8000_panel_disable_lcd,
};
static struct omap_dss_device devkit8000_lcd_device = {
.name = "lcd",
.driver_name = "generic_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.data = &lcd_panel,
.phy.dpi.data_lines = 24,
.reset_gpio = -EINVAL, /* will be replaced */
.platform_enable = devkit8000_panel_enable_lcd,
.platform_disable = devkit8000_panel_disable_lcd,
};
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
.platform_enable = devkit8000_panel_enable_dvi,
.platform_disable = devkit8000_panel_disable_dvi,
};
static struct omap_dss_device devkit8000_dvi_device = {
.name = "dvi",
.driver_name = "generic_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
.reset_gpio = -EINVAL, /* will be replaced */
.platform_enable = devkit8000_panel_enable_dvi,
.platform_disable = devkit8000_panel_disable_dvi,
};
static struct omap_dss_device devkit8000_tv_device = {
......
......@@ -31,6 +31,7 @@
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <plat/display.h>
#include <plat/panel-generic-dpi.h>
#include <plat/onenand.h>
#include "mux.h"
......@@ -459,13 +460,18 @@ static void igep2_disable_dvi(struct omap_dss_device *dssdev)
gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0);
}
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
.platform_enable = igep2_enable_dvi,
.platform_disable = igep2_disable_dvi,
};
static struct omap_dss_device igep2_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
.driver_name = "generic_panel",
.driver_name = "generic_dpi_panel",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
.platform_enable = igep2_enable_dvi,
.platform_disable = igep2_disable_dvi,
};
static struct omap_dss_device *igep2_dss_devices[] = {
......
......@@ -41,6 +41,7 @@
#include <plat/board.h>
#include <plat/common.h>
#include <plat/display.h>
#include <plat/panel-generic-dpi.h>
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
......@@ -194,14 +195,19 @@ static void beagle_disable_dvi(struct omap_dss_device *dssdev)
gpio_set_value(dssdev->reset_gpio, 0);
}
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
.platform_enable = beagle_enable_dvi,
.platform_disable = beagle_disable_dvi,
};
static struct omap_dss_device beagle_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
.driver_name = "generic_panel",
.driver_name = "generic_dpi_panel",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
.reset_gpio = 170,
.platform_enable = beagle_enable_dvi,
.platform_disable = beagle_disable_dvi,
};
static struct omap_dss_device beagle_tv_device = {
......
......@@ -43,6 +43,7 @@
#include <plat/common.h>
#include <plat/mcspi.h>
#include <plat/display.h>
#include <plat/panel-generic-dpi.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
......@@ -301,13 +302,18 @@ static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
dvi_enabled = 0;
}
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
.platform_enable = omap3_evm_enable_dvi,
.platform_disable = omap3_evm_disable_dvi,
};
static struct omap_dss_device omap3_evm_dvi_device = {
.name = "dvi",
.driver_name = "generic_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
.platform_enable = omap3_evm_enable_dvi,
.platform_disable = omap3_evm_disable_dvi,
};
static struct omap_dss_device *omap3_evm_dss_devices[] = {
......
......@@ -40,6 +40,7 @@
#include <plat/nand.h>
#include <plat/usb.h>
#include <plat/display.h>
#include <plat/panel-generic-dpi.h>
#include <plat/mcspi.h>
#include <linux/input/matrix_keypad.h>
......@@ -160,13 +161,18 @@ static void omap3_stalker_disable_lcd(struct omap_dss_device *dssdev)
lcd_enabled = 0;
}
static struct panel_generic_dpi_data lcd_panel = {
.name = "generic",
.platform_enable = omap3_stalker_enable_lcd,
.platform_disable = omap3_stalker_disable_lcd,
};
static struct omap_dss_device omap3_stalker_lcd_device = {
.name = "lcd",
.driver_name = "generic_panel",
.driver_name = "generic_dpi_panel",
.data = &lcd_panel,
.phy.dpi.data_lines = 24,
.type = OMAP_DISPLAY_TYPE_DPI,
.platform_enable = omap3_stalker_enable_lcd,
.platform_disable = omap3_stalker_disable_lcd,
};
static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev)
......@@ -208,13 +214,18 @@ static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev)
dvi_enabled = 0;
}
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
.platform_enable = omap3_stalker_enable_dvi,
.platform_disable = omap3_stalker_disable_dvi,
};
static struct omap_dss_device omap3_stalker_dvi_device = {
.name = "dvi",
.driver_name = "generic_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
.platform_enable = omap3_stalker_enable_dvi,
.platform_disable = omap3_stalker_disable_dvi,
};
static struct omap_dss_device *omap3_stalker_dss_devices[] = {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册