提交 8943a92f 编写于 作者: K Kristina Martšenko 提交者: Peter P Waskiewicz Jr

staging: gdm72xx: replace printk() and debug macros with dynamic debugging

Replace printk(KERN_DEBUG ...) with netdev_dbg and dev_dbg. Remove
debug macros which become unnecessary.

This removes the following types of checkpatch warnings from the driver:
drivers/staging/gdm72xx/gdm_sdio.c:461: WARNING: Prefer netdev_dbg(netdev, ... then dev_dbg(dev, ... then pr_debug(...  to printk(KERN_DEBUG ...
Signed-off-by: NKristina Martšenko <kristina.martsenko@gmail.com>
Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
上级 4db02435
......@@ -38,8 +38,6 @@
#define TX_HZ 2000
#define TX_INTERVAL (1000000/TX_HZ)
/*#define DEBUG*/
static int init_sdio(struct sdiowm_dev *sdev);
static void release_sdio(struct sdiowm_dev *sdev);
......@@ -457,14 +455,10 @@ static int control_sdu_tx_flow(struct sdiowm_dev *sdev, u8 *hci_data, int len)
goto out;
if (hci_data[4] == 0) {
#ifdef DEBUG
printk(KERN_DEBUG "WIMAX ==> STOP SDU TX\n");
#endif
dev_dbg(&sdev->func->dev, "WIMAX ==> STOP SDU TX\n");
tx->stop_sdu_tx = 1;
} else if (hci_data[4] == 1) {
#ifdef DEBUG
printk(KERN_DEBUG "WIMAX ==> START SDU TX\n");
#endif
dev_dbg(&sdev->func->dev, "WIMAX ==> START SDU TX\n");
tx->stop_sdu_tx = 0;
if (tx->can_send)
schedule_work(&sdev->ws);
......@@ -515,18 +509,14 @@ static void gdm_sdio_irq(struct sdio_func *func)
}
if (hdr[3] == 1) { /* Ack */
#ifdef DEBUG
u32 *ack_seq = (u32 *)&hdr[4];
#endif
spin_lock_irqsave(&tx->lock, flags);
tx->can_send = 1;
if (!list_empty(&tx->sdu_list) || !list_empty(&tx->hci_list))
schedule_work(&sdev->ws);
spin_unlock_irqrestore(&tx->lock, flags);
#ifdef DEBUG
printk(KERN_DEBUG "Ack... %0x\n", ntohl(*ack_seq));
#endif
dev_dbg(&func->dev, "Ack... %0x\n", ntohl(*ack_seq));
goto done;
}
......
......@@ -55,8 +55,6 @@ static int k_mode_stop;
static int init_usb(struct usbwm_dev *udev);
static void release_usb(struct usbwm_dev *udev);
/*#define DEBUG */
static struct usb_tx *alloc_tx_struct(struct tx_cxt *tx)
{
struct usb_tx *t = kzalloc(sizeof(*t), GFP_ATOMIC);
......@@ -423,10 +421,7 @@ static void gdm_usb_rcv_complete(struct urb *urb)
struct usb_tx *t;
u16 cmd_evt;
unsigned long flags, flags2;
#ifdef CONFIG_WIMAX_GDM72XX_USB_PM
struct usb_device *dev = urb->dev;
#endif
/* Completion by usb_unlink_urb */
if (urb->status == -ECONNRESET)
......@@ -440,15 +435,11 @@ static void gdm_usb_rcv_complete(struct urb *urb)
r->buf, urb->actual_length, false);
if (cmd_evt == WIMAX_SDU_TX_FLOW) {
if (r->buf[4] == 0) {
#ifdef DEBUG
printk(KERN_DEBUG "WIMAX ==> STOP SDU TX\n");
#endif
dev_dbg(&dev->dev, "WIMAX ==> STOP SDU TX\n");
list_for_each_entry(t, &tx->sdu_list, list)
usb_unlink_urb(t->urb);
} else if (r->buf[4] == 1) {
#ifdef DEBUG
printk(KERN_DEBUG "WIMAX ==> START SDU TX\n");
#endif
dev_dbg(&dev->dev, "WIMAX ==> START SDU TX\n");
list_for_each_entry(t, &tx->sdu_list, list) {
usb_submit_urb(t->urb, GFP_ATOMIC);
}
......
......@@ -62,7 +62,6 @@ static u8 gdm_wimax_macaddr[6] = {0x00, 0x0a, 0x3b, 0xf0, 0x01, 0x30};
static void gdm_wimax_ind_fsm_update(struct net_device *dev, struct fsm_s *fsm);
static void gdm_wimax_ind_if_updown(struct net_device *dev, int if_up);
#if defined(DEBUG_SDU)
static const char *get_protocol_name(u16 protocol)
{
static char buf[32];
......@@ -126,7 +125,8 @@ static const char *get_port_name(u16 port)
return buf;
}
static void dump_eth_packet(const char *title, u8 *data, int len)
static void dump_eth_packet(struct net_device *dev, const char *title,
u8 *data, int len)
{
struct iphdr *ih = NULL;
struct udphdr *uh = NULL;
......@@ -148,7 +148,7 @@ static void dump_eth_packet(const char *title, u8 *data, int len)
port = ntohs(uh->dest);
}
printk(KERN_DEBUG "[%s] len=%d, %s, %s, %s\n",
netdev_dbg(dev, "[%s] len=%d, %s, %s, %s\n",
title, len,
get_protocol_name(protocol),
get_ip_protocol_name(ip_protocol),
......@@ -156,15 +156,13 @@ static void dump_eth_packet(const char *title, u8 *data, int len)
if (!(data[0] == 0xff && data[1] == 0xff)) {
if (protocol == ETH_P_IP)
printk(KERN_DEBUG " src=%pI4\n", &ih->saddr);
netdev_dbg(dev, " src=%pI4\n", &ih->saddr);
else if (protocol == ETH_P_IPV6)
printk(KERN_DEBUG " src=%pI6\n", &ih->saddr);
netdev_dbg(dev, " src=%pI6\n", &ih->saddr);
}
print_hex_dump_debug("", DUMP_PREFIX_NONE, 16, 1, data, len, false);
}
#endif
static inline int gdm_wimax_header(struct sk_buff **pskb)
{
......@@ -198,12 +196,10 @@ static void gdm_wimax_event_rcv(struct net_device *dev, u16 type, void *msg,
{
struct nic *nic = netdev_priv(dev);
#if defined(DEBUG_HCI)
u8 *buf = (u8 *) msg;
u16 hci_cmd = (buf[0]<<8) | buf[1];
u16 hci_len = (buf[2]<<8) | buf[3];
printk(KERN_DEBUG "H=>D: 0x%04x(%d)\n", hci_cmd, hci_len);
#endif
netdev_dbg(dev, "H=>D: 0x%04x(%d)\n", hci_cmd, hci_len);
gdm_wimax_send(nic, msg, len);
}
......@@ -312,11 +308,9 @@ static int gdm_wimax_event_send(struct net_device *dev, char *buf, int size)
struct evt_entry *e;
unsigned long flags;
#if defined(DEBUG_HCI)
u16 hci_cmd = ((u8)buf[0]<<8) | (u8)buf[1];
u16 hci_len = ((u8)buf[2]<<8) | (u8)buf[3];
printk(KERN_DEBUG "D=>H: 0x%04x(%d)\n", hci_cmd, hci_len);
#endif
netdev_dbg(dev, "D=>H: 0x%04x(%d)\n", hci_cmd, hci_len);
spin_lock_irqsave(&wm_event.evt_lock, flags);
......@@ -376,9 +370,7 @@ static int gdm_wimax_tx(struct sk_buff *skb, struct net_device *dev)
struct nic *nic = netdev_priv(dev);
struct fsm_s *fsm = (struct fsm_s *) nic->sdk_data[SIOC_DATA_FSM].buf;
#if defined(DEBUG_SDU)
dump_eth_packet("TX", skb->data, skb->len);
#endif
dump_eth_packet(dev, "TX", skb->data, skb->len);
ret = gdm_wimax_header(&skb);
if (ret < 0) {
......@@ -717,9 +709,7 @@ static void gdm_wimax_netif_rx(struct net_device *dev, char *buf, int len)
struct sk_buff *skb;
int ret;
#if defined(DEBUG_SDU)
dump_eth_packet("RX", buf, len);
#endif
dump_eth_packet(dev, "RX", buf, len);
skb = dev_alloc_skb(len + 2);
if (!skb) {
......
......@@ -62,10 +62,6 @@ struct nic {
};
/*#define DEBUG_SDU */
/*#define DEBUG_HCI */
/*#define LOOPBACK_TEST */
extern int register_wimax_device(struct phy_dev *phy_dev, struct device *pdev);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册