tools/power/x86/intel-speed-select: Improve core-power result and error display

task #29499913

commit fe6fb2165ade451d7a354787a8e4f00fa5bd3e44 upstream

This change adds improved error display and handling for commands related
to core-power feature. The changes include:
- Replace perror with helpful error message
- Use ordered priority for SKX based platform by default as the
proportional priority is not supported
- Don't show weight and epp in help and also give error when user
tries to set them in SKX based platforms
- Range check for epp and weights and display error
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NErwei Deng <erwei@linux.alibaba.com>
Reviewed-by: NArtie Ding <artie.ding@linux.alibaba.com>

tools/power/x86/intel-speed-select/isst-config.c

@@ -1359,7 +1359,7 @@ static int set_clos_param(int cpu, int clos, int epp, int wt, int min, int max)
 
 	ret = isst_pm_get_clos(cpu, clos, &clos_config);
 	if (ret) {
-		perror("isst_pm_get_clos");
+		isst_display_error_info_message(1, "isst_pm_get_clos failed", 0, 0);
 		return ret;
 	}
 	clos_config.clos_min = min;
@@ -1368,7 +1368,7 @@ static int set_clos_param(int cpu, int clos, int epp, int wt, int min, int max)
 	clos_config.clos_prop_prio = wt;
 	ret = isst_set_clos(cpu, clos, &clos_config);
 	if (ret) {
-		perror("isst_pm_set_clos");
+		isst_display_error_info_message(1, "isst_set_clos failed", 0, 0);
 		return ret;
 	}
 
@@ -1575,7 +1575,7 @@ static int set_core_priority_and_min(int cpu, int mask_size,
 		debug_printf("Associate cpu: %d clos: %d\n", i, clos);
 		ret = isst_clos_associate(i, clos);
 		if (ret) {
-			perror("isst_clos_associate");
+			isst_display_error_info_message(1, "isst_clos_associate failed", 0, 0);
 			return ret;
 		}
 	}
@@ -1591,14 +1591,14 @@ static int set_pbf_core_power(int cpu)
 
 	ret = isst_get_ctdp_levels(cpu, &pkg_dev);
 	if (ret) {
-		perror("isst_get_ctdp_levels");
+		debug_printf("isst_get_ctdp_levels failed");
 		return ret;
 	}
 	debug_printf("Current_level: %d\n", pkg_dev.current_level);
 
 	ret = isst_get_pbf_info(cpu, pkg_dev.current_level, &pbf_info);
 	if (ret) {
-		perror("isst_get_pbf_info");
+		debug_printf("isst_get_pbf_info failed");
 		return ret;
 	}
 	debug_printf("p1_high: %d p1_low: %d\n", pbf_info.p1_high,
@@ -1608,13 +1608,13 @@ static int set_pbf_core_power(int cpu)
 					pbf_info.core_cpumask,
 					pbf_info.p1_high, pbf_info.p1_low);
 	if (ret) {
-		perror("set_core_priority_and_min");
+		debug_printf("set_core_priority_and_min failed");
 		return ret;
 	}
 
 	ret = isst_pm_qos_config(cpu, 1, 1);
 	if (ret) {
-		perror("isst_pm_qos_config");
+		debug_printf("isst_pm_qos_config failed");
 		return ret;
 	}
 
@@ -1664,7 +1664,7 @@ static void set_pbf_for_cpu(int cpu, void *arg1, void *arg2, void *arg3,
 	}
 
 	if (auto_mode && !status)
-		isst_pm_qos_config(cpu, 0, 0);
+		isst_pm_qos_config(cpu, 0, 1);
 
 disp_result:
 	if (status)
@@ -1913,9 +1913,12 @@ static void enable_clos_qos_config(int cpu, void *arg1, void *arg2, void *arg3,
 	int ret;
 	int status = *(int *)arg4;
 
+	if (is_skx_based_platform())
+		clos_priority_type = 1;
+
 	ret = isst_pm_qos_config(cpu, status, clos_priority_type);
 	if (ret)
-		perror("isst_pm_qos_config");
+		isst_display_error_info_message(1, "isst_pm_qos_config failed", 0, 0);
 
 	if (status)
 		isst_display_result(cpu, outf, "core-power", "enable",
@@ -1933,9 +1936,11 @@ static void set_clos_enable(int arg)
 		if (enable) {
 			fprintf(stderr,
 				"Enable core-power for a package/die\n");
-			fprintf(stderr,
-				"\tClos Enable: Specify priority type with [--priority|-p]\n");
-			fprintf(stderr, "\t\t 0: Proportional, 1: Ordered\n");
+			if (!is_skx_based_platform()) {
+				fprintf(stderr,
+					"\tClos Enable: Specify priority type with [--priority|-p]\n");
+				fprintf(stderr, "\t\t 0: Proportional, 1: Ordered\n");
+			}
 		} else {
 			fprintf(stderr,
 				"Disable core-power: [No command arguments are required]\n");
@@ -1966,7 +1971,7 @@ static void dump_clos_config_for_cpu(int cpu, void *arg1, void *arg2,
 
 	ret = isst_pm_get_clos(cpu, current_clos, &clos_config);
 	if (ret)
-		perror("isst_pm_get_clos");
+		isst_display_error_info_message(1, "isst_pm_get_clos failed", 0, 0);
 	else
 		isst_clos_display_information(cpu, outf, current_clos,
 					      &clos_config);
@@ -1982,7 +1987,8 @@ static void dump_clos_config(int arg)
 		exit(0);
 	}
 	if (current_clos < 0 || current_clos > 3) {
-		fprintf(stderr, "Invalid clos id\n");
+		isst_display_error_info_message(1, "Invalid clos id\n", 0, 0);
+		isst_ctdp_display_information_end(outf);
 		exit(0);
 	}
 
@@ -2003,7 +2009,7 @@ static void get_clos_info_for_cpu(int cpu, void *arg1, void *arg2, void *arg3,
 
 	ret = isst_clos_get_clos_information(cpu, &enable, &prio_type);
 	if (ret)
-		perror("isst_clos_get_info");
+		isst_display_error_info_message(1, "isst_clos_get_info failed", 0, 0);
 	else {
 		int cp_state, cp_cap;
 
@@ -2049,7 +2055,7 @@ static void set_clos_config_for_cpu(int cpu, void *arg1, void *arg2, void *arg3,
 	clos_config.clos_desired = clos_desired;
 	ret = isst_set_clos(cpu, current_clos, &clos_config);
 	if (ret)
-		perror("isst_set_clos");
+		isst_display_error_info_message(1, "isst_set_clos failed", 0, 0);
 	else
 		isst_display_result(cpu, outf, "core-power", "config", ret);
 }
@@ -2061,26 +2067,27 @@ static void set_clos_config(int arg)
 			"Set core-power configuration for one of the four clos ids\n");
 		fprintf(stderr,
 			"\tSpecify targeted clos id with [--clos|-c]\n");
-		fprintf(stderr, "\tSpecify clos EPP with [--epp|-e]\n");
-		fprintf(stderr,
-			"\tSpecify clos Proportional Priority [--weight|-w]\n");
+		if (!is_skx_based_platform()) {
+			fprintf(stderr, "\tSpecify clos EPP with [--epp|-e]\n");
+			fprintf(stderr,
+				"\tSpecify clos Proportional Priority [--weight|-w]\n");
+		}
 		fprintf(stderr, "\tSpecify clos min in MHz with [--min|-n]\n");
 		fprintf(stderr, "\tSpecify clos max in MHz with [--max|-m]\n");
-		fprintf(stderr, "\tSpecify clos desired in MHz with [--desired|-d]\n");
 		exit(0);
 	}
 
 	if (current_clos < 0 || current_clos > 3) {
-		fprintf(stderr, "Invalid clos id\n");
+		isst_display_error_info_message(1, "Invalid clos id\n", 0, 0);
 		exit(0);
 	}
-	if (clos_epp < 0 || clos_epp > 0x0F) {
-		fprintf(stderr, "clos epp is not specified, default: 0\n");
+	if (!is_skx_based_platform() && (clos_epp < 0 || clos_epp > 0x0F)) {
+		fprintf(stderr, "clos epp is not specified or invalid, default: 0\n");
 		clos_epp = 0;
 	}
-	if (clos_prop_prio < 0 || clos_prop_prio > 0x0F) {
+	if (!is_skx_based_platform() && (clos_prop_prio < 0 || clos_prop_prio > 0x0F)) {
 		fprintf(stderr,
-			"clos frequency weight is not specified, default: 0\n");
+			"clos frequency weight is not specified or invalid, default: 0\n");
 		clos_prop_prio = 0;
 	}
 	if (clos_min < 0) {
@@ -2088,11 +2095,11 @@ static void set_clos_config(int arg)
 		clos_min = 0;
 	}
 	if (clos_max < 0) {
-		fprintf(stderr, "clos max is not specified, default: 25500 MHz\n");
+		fprintf(stderr, "clos max is not specified, default: Max frequency (ratio 0xff)\n");
 		clos_max = 0xff;
 	}
-	if (clos_desired < 0) {
-		fprintf(stderr, "clos desired is not specified, default: 0\n");
+	if (clos_desired) {
+		fprintf(stderr, "clos desired is not supported on this platform\n");
 		clos_desired = 0x00;
 	}
 
@@ -2113,7 +2120,7 @@ static void set_clos_assoc_for_cpu(int cpu, void *arg1, void *arg2, void *arg3,
 
 	ret = isst_clos_associate(cpu, current_clos);
 	if (ret)
-		perror("isst_clos_associate");
+		debug_printf("isst_clos_associate failed");
 	else
 		isst_display_result(cpu, outf, "core-power", "assoc", ret);
 }
@@ -2132,15 +2139,14 @@ static void set_clos_assoc(int arg)
 	}
 
 	if (current_clos < 0 || current_clos > 3) {
-		fprintf(stderr, "Invalid clos id\n");
+		isst_display_error_info_message(1, "Invalid clos id\n", 0, 0);
 		exit(0);
 	}
 	if (max_target_cpus)
 		for_each_online_target_cpu_in_set(set_clos_assoc_for_cpu, NULL,
 						  NULL, NULL, NULL);
 	else {
-		fprintf(stderr,
-			"Invalid target cpu. Specify with [-c|--cpu]\n");
+		isst_display_error_info_message(1, "Invalid target cpu. Specify with [-c|--cpu]", 0, 0);
 	}
 }
 
@@ -2151,7 +2157,7 @@ static void get_clos_assoc_for_cpu(int cpu, void *arg1, void *arg2, void *arg3,
 
 	ret = isst_clos_get_assoc_status(cpu, &clos);
 	if (ret)
-		perror("isst_clos_get_assoc_status");
+		isst_display_error_info_message(1, "isst_clos_get_assoc_status failed", 0, 0);
 	else
 		isst_clos_display_assoc_information(cpu, outf, clos);
 }
@@ -2165,8 +2171,7 @@ static void get_clos_assoc(int arg)
 	}
 
 	if (!max_target_cpus) {
-		fprintf(stderr,
-			"Invalid target cpu. Specify with [-c|--cpu]\n");
+		isst_display_error_info_message(1, "Invalid target cpu. Specify with [-c|--cpu]", 0, 0);
 		exit(0);
 	}
 
@@ -2346,6 +2351,10 @@ static void parse_cmd_args(int argc, int start, char **argv)
 			break;
 		case 'e':
 			clos_epp = atoi(optarg);
+			if (is_skx_based_platform()) {
+				isst_display_error_info_message(1, "epp can't be specified on this platform", 0, 0);
+				exit(0);
+			}
 			break;
 		case 'n':
 			clos_min = atoi(optarg);
@@ -2357,9 +2366,17 @@ static void parse_cmd_args(int argc, int start, char **argv)
 			break;
 		case 'p':
 			clos_priority_type = atoi(optarg);
+			if (is_skx_based_platform() && !clos_priority_type) {
+				isst_display_error_info_message(1, "Invalid clos priority type: proportional for this platform", 0, 0);
+				exit(0);
+			}
 			break;
 		case 'w':
 			clos_prop_prio = atoi(optarg);
+			if (is_skx_based_platform()) {
+				isst_display_error_info_message(1, "weight can't be specified on this platform", 0, 0);
+				exit(0);
+			}
 			break;
 		default:
 			printf("no match\n");

tools/power/x86/intel-speed-select/isst-core.c

@@ -876,17 +876,19 @@ int isst_pm_qos_config(int cpu, int enable_clos, int priority_type)
 		}
 		ret = isst_write_pm_config(cpu, 0);
 		if (ret)
-			perror("isst_write_pm_config\n");
+			isst_display_error_info_message(0, "WRITE_PM_CONFIG command failed, ignoring error\n", 0, 0);
 	} else {
 		ret = isst_write_pm_config(cpu, 1);
 		if (ret)
-			perror("isst_write_pm_config\n");
+			isst_display_error_info_message(0, "WRITE_PM_CONFIG command failed, ignoring error\n", 0, 0);
 	}
 
 	ret = isst_send_mbox_command(cpu, CONFIG_CLOS, CLOS_PM_QOS_CONFIG, 0, 0,
 				     &resp);
-	if (ret)
+	if (ret) {
+		isst_display_error_info_message(1, "CLOS_PM_QOS_CONFIG command failed", 0, 0);
 		return ret;
+	}
 
 	debug_printf("cpu:%d CLOS_PM_QOS_CONFIG resp:%x\n", cpu, resp);
 
@@ -898,7 +900,7 @@ int isst_pm_qos_config(int cpu, int enable_clos, int priority_type)
 		req = req & ~BIT(1);
 
 	if (priority_type > 1)
-		fprintf(stderr, "Invalid priority type: Changing type to ordered\n");
+		isst_display_error_info_message(1, "Invalid priority type: Changing type to ordered", 0, 0);
 
 	if (priority_type)
 		req = req | BIT(2);

tools/power/x86/intel-speed-select/isst-display.c

@@ -585,7 +585,10 @@ void isst_clos_display_information(int cpu, FILE *outf, int clos,
 	format_and_print(outf, 5, header, value);
 
 	snprintf(header, sizeof(header), "clos-max");
-	snprintf(value, sizeof(value), "%d MHz", clos_config->clos_max * DISP_FREQ_MULTIPLIER);
+	if (clos_config->clos_max == 0xff)
+		snprintf(value, sizeof(value), "Max Turbo frequency");
+	else
+		snprintf(value, sizeof(value), "%d MHz", clos_config->clos_max * DISP_FREQ_MULTIPLIER);
 	format_and_print(outf, 5, header, value);
 
 	snprintf(header, sizeof(header), "clos-desired");