ARM: dts: meson: add the SDIO MMC controller

Meson6, Meson8 and Meson8b are using the same MMC controller IP. This
adds the MMC controller node to meson.dtsi so it can be used by all
SoCs.

The controller itself is a bit special, because it has multiple slots.
Each slot is accessed through a sub-node of the controller. However,
currently the driver for this hardware only supports one slot.
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

arch/arm/boot/dts/meson.dtsi

@@ -165,6 +165,15 @@
 				status = "disabled";
 			};
 
+			sdio: mmc@8c20 {
+				compatible = "amlogic,meson-mx-sdio";
+				reg = <0x8c20 0x20>;
+				interrupts = <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			spifc: spi@8c80 {
 				compatible = "amlogic,meson6-spifc";
 				reg = <0x8c80 0x80>;

arch/arm/boot/dts/meson8.dtsi

@@ -299,6 +299,12 @@
 	clock-names = "clkin", "core", "sana";
 };
 
+&sdio {
+	compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio";
+	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+	clock-names = "core", "clkin";
+};
+
 &spifc {
 	clocks = <&clkc CLKID_CLK81>;
 };

arch/arm/boot/dts/meson8b.dtsi

@@ -207,6 +207,12 @@
 	clock-names = "clkin", "core", "sana";
 };
 
+&sdio {
+	compatible = "amlogic,meson8b-sdio", "amlogic,meson-mx-sdio";
+	clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>;
+	clock-names = "core", "clkin";
+};
+
 &uart_AO {
 	clocks = <&clkc CLKID_CLK81>;
 };