Skip to content

cloud-kernel
cloud-kernel

openanolis / cloud-kernel
接近 2 年 前同步成功

通知 170
Star 36
Fork 7
cloud-kernel
cloud-kernel
提交 88ae3aed 编写于 作者: L Lars-Peter Clausen 提交者： Jonathan Cameron
浏览文件
操作

staging:iio:adis16204: Remove adis16204 driver 

The ADIS16204 part has been obsoleted, which makes it hard to get the
hardware to even test the driver. Considering this there is no expectation
that the driver will be cleaned up and be able to move out of staging, so
remove the driver.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>
上级 e84a41d5
隐藏空白更改
内联 并排
Showing with 0 addition and 336 deletion
drivers/staging/iio/accel/Kconfig
浏览文件 @ 88ae3aed
......@@ -27,18 +27,6 @@ config ADIS16203
To compile this driver as a module, say M here: the module will be
called adis16203.
config ADIS16204
tristate "Analog Devices ADIS16204 Programmable High-g Digital Impact Sensor and Recorder"
depends on SPI
select IIO_ADIS_LIB
select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
help
Say Y here to build support for Analog Devices adis16204 Programmable
High-g Digital Impact Sensor and Recorder.
To compile this driver as a module, say M here: the module will be
called adis16204.
config ADIS16209
tristate "Analog Devices ADIS16209 Dual-Axis Digital Inclinometer and Accelerometer"
depends on SPI
......
drivers/staging/iio/accel/Makefile
浏览文件 @ 88ae3aed
......@@ -8,9 +8,6 @@ obj-$(CONFIG_ADIS16201) += adis16201.o
adis16203-y := adis16203_core.o
obj-$(CONFIG_ADIS16203) += adis16203.o
adis16204-y := adis16204_core.o
obj-$(CONFIG_ADIS16204) += adis16204.o
adis16209-y := adis16209_core.o
obj-$(CONFIG_ADIS16209) += adis16209.o
......
drivers/staging/iio/accel/adis16204.h 已删除 100644 → 0
浏览文件 @ e84a41d5
#ifndef SPI_ADIS16204_H_
#define SPI_ADIS16204_H_
#define ADIS16204_STARTUP_DELAY 220 /* ms */
#define ADIS16204_FLASH_CNT 0x00 /* Flash memory write count */
#define ADIS16204_SUPPLY_OUT 0x02 /* Output, power supply */
#define ADIS16204_XACCL_OUT 0x04 /* Output, x-axis accelerometer */
#define ADIS16204_YACCL_OUT 0x06 /* Output, y-axis accelerometer */
#define ADIS16204_AUX_ADC 0x08 /* Output, auxiliary ADC input */
#define ADIS16204_TEMP_OUT 0x0A /* Output, temperature */
#define ADIS16204_X_PEAK_OUT 0x0C /* Twos complement */
#define ADIS16204_Y_PEAK_OUT 0x0E /* Twos complement */
#define ADIS16204_XACCL_NULL 0x10 /* Calibration, x-axis acceleration offset null */
#define ADIS16204_YACCL_NULL 0x12 /* Calibration, y-axis acceleration offset null */
#define ADIS16204_XACCL_SCALE 0x14 /* X-axis scale factor calibration register */
#define ADIS16204_YACCL_SCALE 0x16 /* Y-axis scale factor calibration register */
#define ADIS16204_XY_RSS_OUT 0x18 /* XY combined acceleration (RSS) */
#define ADIS16204_XY_PEAK_OUT 0x1A /* Peak, XY combined output (RSS) */
#define ADIS16204_CAP_BUF_1 0x1C /* Capture buffer output register 1 */
#define ADIS16204_CAP_BUF_2 0x1E /* Capture buffer output register 2 */
#define ADIS16204_ALM_MAG1 0x20 /* Alarm 1 amplitude threshold */
#define ADIS16204_ALM_MAG2 0x22 /* Alarm 2 amplitude threshold */
#define ADIS16204_ALM_CTRL 0x28 /* Alarm control */
#define ADIS16204_CAPT_PNTR 0x2A /* Capture register address pointer */
#define ADIS16204_AUX_DAC 0x30 /* Auxiliary DAC data */
#define ADIS16204_GPIO_CTRL 0x32 /* General-purpose digital input/output control */
#define ADIS16204_MSC_CTRL 0x34 /* Miscellaneous control */
#define ADIS16204_SMPL_PRD 0x36 /* Internal sample period (rate) control */
#define ADIS16204_AVG_CNT 0x38 /* Operation, filter configuration */
#define ADIS16204_SLP_CNT 0x3A /* Operation, sleep mode control */
#define ADIS16204_DIAG_STAT 0x3C /* Diagnostics, system status register */
#define ADIS16204_GLOB_CMD 0x3E /* Operation, system command register */
/* MSC_CTRL */
#define ADIS16204_MSC_CTRL_PWRUP_SELF_TEST BIT(10) /* Self-test at power-on: 1 = disabled, 0 = enabled */
#define ADIS16204_MSC_CTRL_SELF_TEST_EN BIT(8) /* Self-test enable */
#define ADIS16204_MSC_CTRL_DATA_RDY_EN BIT(2) /* Data-ready enable: 1 = enabled, 0 = disabled */
#define ADIS16204_MSC_CTRL_ACTIVE_HIGH BIT(1) /* Data-ready polarity: 1 = active high, 0 = active low */
#define ADIS16204_MSC_CTRL_DATA_RDY_DIO2 BIT(0) /* Data-ready line selection: 1 = DIO2, 0 = DIO1 */
/* DIAG_STAT */
#define ADIS16204_DIAG_STAT_ALARM2 BIT(9) /* Alarm 2 status: 1 = alarm active, 0 = alarm inactive */
#define ADIS16204_DIAG_STAT_ALARM1 BIT(8) /* Alarm 1 status: 1 = alarm active, 0 = alarm inactive */
#define ADIS16204_DIAG_STAT_SELFTEST_FAIL_BIT 5 /* Self-test diagnostic error flag: 1 = error condition,
0 = normal operation */
#define ADIS16204_DIAG_STAT_SPI_FAIL_BIT 3 /* SPI communications failure */
#define ADIS16204_DIAG_STAT_FLASH_UPT_BIT 2 /* Flash update failure */
#define ADIS16204_DIAG_STAT_POWER_HIGH_BIT 1 /* Power supply above 3.625 V */
#define ADIS16204_DIAG_STAT_POWER_LOW_BIT 0 /* Power supply below 2.975 V */
/* GLOB_CMD */
#define ADIS16204_GLOB_CMD_SW_RESET BIT(7)
#define ADIS16204_GLOB_CMD_CLEAR_STAT BIT(4)
#define ADIS16204_GLOB_CMD_FACTORY_CAL BIT(1)
#define ADIS16204_ERROR_ACTIVE BIT(14)
enum adis16204_scan {
ADIS16204_SCAN_ACC_X,
ADIS16204_SCAN_ACC_Y,
ADIS16204_SCAN_ACC_XY,
ADIS16204_SCAN_SUPPLY,
ADIS16204_SCAN_AUX_ADC,
ADIS16204_SCAN_TEMP,
};
#endif /* SPI_ADIS16204_H_ */
drivers/staging/iio/accel/adis16204_core.c 已删除 100644 → 0
浏览文件 @ e84a41d5
/*
* ADIS16204 Programmable High-g Digital Impact Sensor and Recorder
*
* Copyright 2010 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/imu/adis.h>
#include "adis16204.h"
/* Unique to this driver currently */
static const u8 adis16204_addresses[][2] = {
[ADIS16204_SCAN_ACC_X] = { ADIS16204_XACCL_NULL, ADIS16204_X_PEAK_OUT },
[ADIS16204_SCAN_ACC_Y] = { ADIS16204_YACCL_NULL, ADIS16204_Y_PEAK_OUT },
[ADIS16204_SCAN_ACC_XY] = { 0, ADIS16204_XY_PEAK_OUT },
};
static int adis16204_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2,
long mask)
{
struct adis *st = iio_priv(indio_dev);
int ret;
int bits;
u8 addr;
s16 val16;
int addrind;
switch (mask) {
case IIO_CHAN_INFO_RAW:
return adis_single_conversion(indio_dev, chan,
ADIS16204_ERROR_ACTIVE, val);
case IIO_CHAN_INFO_SCALE:
switch (chan->type) {
case IIO_VOLTAGE:
if (chan->channel == 0) {
*val = 1;
*val2 = 220000; /* 1.22 mV */
} else {
*val = 0;
*val2 = 610000; /* 0.61 mV */
}
return IIO_VAL_INT_PLUS_MICRO;
case IIO_TEMP:
*val = -470; /* 0.47 C */
*val2 = 0;
return IIO_VAL_INT_PLUS_MICRO;
case IIO_ACCEL:
*val = 0;
switch (chan->channel2) {
case IIO_MOD_X:
case IIO_MOD_ROOT_SUM_SQUARED_X_Y:
*val2 = IIO_G_TO_M_S_2(17125); /* 17.125 mg */
break;
case IIO_MOD_Y:
case IIO_MOD_Z:
*val2 = IIO_G_TO_M_S_2(8407); /* 8.407 mg */
break;
}
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
break;
case IIO_CHAN_INFO_OFFSET:
*val = 25000 / -470 - 1278; /* 25 C = 1278 */
return IIO_VAL_INT;
case IIO_CHAN_INFO_CALIBBIAS:
case IIO_CHAN_INFO_PEAK:
if (mask == IIO_CHAN_INFO_CALIBBIAS) {
bits = 12;
addrind = 0;
} else { /* PEAK_SEPARATE */
bits = 14;
addrind = 1;
}
mutex_lock(&indio_dev->mlock);
addr = adis16204_addresses[chan->scan_index][addrind];
ret = adis_read_reg_16(st, addr, &val16);
if (ret) {
mutex_unlock(&indio_dev->mlock);
return ret;
}
val16 &= (1 << bits) - 1;
val16 = (s16)(val16 << (16 - bits)) >> (16 - bits);
*val = val16;
mutex_unlock(&indio_dev->mlock);
return IIO_VAL_INT;
}
return -EINVAL;
}
static int adis16204_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val,
int val2,
long mask)
{
struct adis *st = iio_priv(indio_dev);
int bits;
s16 val16;
u8 addr;
switch (mask) {
case IIO_CHAN_INFO_CALIBBIAS:
switch (chan->type) {
case IIO_ACCEL:
bits = 12;
break;
default:
return -EINVAL;
}
val16 = val & ((1 << bits) - 1);
addr = adis16204_addresses[chan->scan_index][1];
return adis_write_reg_16(st, addr, val16);
}
return -EINVAL;
}
static const struct iio_chan_spec adis16204_channels[] = {
ADIS_SUPPLY_CHAN(ADIS16204_SUPPLY_OUT, ADIS16204_SCAN_SUPPLY, 0, 12),
ADIS_AUX_ADC_CHAN(ADIS16204_AUX_ADC, ADIS16204_SCAN_AUX_ADC, 0, 12),
ADIS_TEMP_CHAN(ADIS16204_TEMP_OUT, ADIS16204_SCAN_TEMP, 0, 12),
ADIS_ACCEL_CHAN(X, ADIS16204_XACCL_OUT, ADIS16204_SCAN_ACC_X,
BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_PEAK),
0, 14),
ADIS_ACCEL_CHAN(Y, ADIS16204_YACCL_OUT, ADIS16204_SCAN_ACC_Y,
BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_PEAK),
0, 14),
ADIS_ACCEL_CHAN(ROOT_SUM_SQUARED_X_Y, ADIS16204_XY_RSS_OUT,
ADIS16204_SCAN_ACC_XY, BIT(IIO_CHAN_INFO_PEAK), 0, 14),
IIO_CHAN_SOFT_TIMESTAMP(5),
};
static const struct iio_info adis16204_info = {
.read_raw = &adis16204_read_raw,
.write_raw = &adis16204_write_raw,
.update_scan_mode = adis_update_scan_mode,
.driver_module = THIS_MODULE,
};
static const char * const adis16204_status_error_msgs[] = {
[ADIS16204_DIAG_STAT_SELFTEST_FAIL_BIT] = "Self test failure",
[ADIS16204_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
[ADIS16204_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
[ADIS16204_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 3.625V",
[ADIS16204_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 2.975V",
};
static const struct adis_data adis16204_data = {
.read_delay = 20,
.msc_ctrl_reg = ADIS16204_MSC_CTRL,
.glob_cmd_reg = ADIS16204_GLOB_CMD,
.diag_stat_reg = ADIS16204_DIAG_STAT,
.self_test_mask = ADIS16204_MSC_CTRL_SELF_TEST_EN,
.startup_delay = ADIS16204_STARTUP_DELAY,
.status_error_msgs = adis16204_status_error_msgs,
.status_error_mask = BIT(ADIS16204_DIAG_STAT_SELFTEST_FAIL_BIT) |
BIT(ADIS16204_DIAG_STAT_SPI_FAIL_BIT) |
BIT(ADIS16204_DIAG_STAT_FLASH_UPT_BIT) |
BIT(ADIS16204_DIAG_STAT_POWER_HIGH_BIT) |
BIT(ADIS16204_DIAG_STAT_POWER_LOW_BIT),
};
static int adis16204_probe(struct spi_device *spi)
{
int ret;
struct adis *st;
struct iio_dev *indio_dev;
/* setup the industrialio driver allocated elements */
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
st = iio_priv(indio_dev);
/* this is only used for removal purposes */
spi_set_drvdata(spi, indio_dev);
indio_dev->name = spi->dev.driver->name;
indio_dev->dev.parent = &spi->dev;
indio_dev->info = &adis16204_info;
indio_dev->channels = adis16204_channels;
indio_dev->num_channels = ARRAY_SIZE(adis16204_channels);
indio_dev->modes = INDIO_DIRECT_MODE;
ret = adis_init(st, indio_dev, spi, &adis16204_data);
if (ret)
return ret;
ret = adis_setup_buffer_and_trigger(st, indio_dev, NULL);
if (ret)
return ret;
/* Get the device into a sane initial state */
ret = adis_initial_startup(st);
if (ret)
goto error_cleanup_buffer_trigger;
ret = iio_device_register(indio_dev);
if (ret)
goto error_cleanup_buffer_trigger;
return 0;
error_cleanup_buffer_trigger:
adis_cleanup_buffer_and_trigger(st, indio_dev);
return ret;
}
static int adis16204_remove(struct spi_device *spi)
{
struct iio_dev *indio_dev = spi_get_drvdata(spi);
struct adis *st = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
adis_cleanup_buffer_and_trigger(st, indio_dev);
return 0;
}
static struct spi_driver adis16204_driver = {
.driver = {
.name = "adis16204",
},
.probe = adis16204_probe,
.remove = adis16204_remove,
};
module_spi_driver(adis16204_driver);
MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
MODULE_DESCRIPTION("ADIS16204 High-g Digital Impact Sensor and Recorder");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("spi:adis16204");
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或