提交 889c05bd 编写于 作者: D Dan Williams 提交者: John W. Linville

[PATCH] libertas: remove WLAN_802_11_WEP_STATUS enum

Also change WEPstatus to "wep_enabled"; it's clearer and consistent with the
WPAenabled and WPA2enabled members.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 6affe785
......@@ -196,7 +196,7 @@ static int assoc_helper_wep_keys(wlan_private *priv,
goto out;
/* enable/disable the MAC's WEP packet filter */
if (assoc_req->secinfo.WEPstatus == wlan802_11WEPenabled)
if (assoc_req->secinfo.wep_enabled)
adapter->currentpacketfilter |= cmd_act_mac_wep_enable;
else
adapter->currentpacketfilter &= ~cmd_act_mac_wep_enable;
......
......@@ -276,12 +276,6 @@ enum WLAN_802_11_NETWORK_INFRASTRUCTURE {
wlan802_11infrastructuremax
};
/** WLAN_802_11_WEP_STATUS */
enum WLAN_802_11_WEP_STATUS {
wlan802_11WEPenabled,
wlan802_11WEPdisabled,
};
/** SNMP_MIB_INDEX_e */
enum SNMP_MIB_INDEX_e {
desired_bsstype_i = 0,
......
......@@ -57,7 +57,7 @@ struct region_channel {
struct wlan_802_11_security {
u8 WPAenabled;
u8 WPA2enabled;
enum WLAN_802_11_WEP_STATUS WEPstatus;
u8 wep_enabled;
u8 auth_mode;
};
......
......@@ -194,12 +194,11 @@ static void wlan_init_adapter(wlan_private * priv)
adapter->scanmode = cmd_bss_type_any;
/* 802.11 specific */
adapter->secinfo.WEPstatus = wlan802_11WEPdisabled;
adapter->secinfo.wep_enabled = 0;
for (i = 0; i < sizeof(adapter->wep_keys) / sizeof(adapter->wep_keys[0]);
i++)
memset(&adapter->wep_keys[i], 0, sizeof(struct WLAN_802_11_KEY));
adapter->wep_tx_keyidx = 0;
adapter->secinfo.WEPstatus = wlan802_11WEPdisabled;
adapter->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
adapter->inframode = wlan802_11infrastructure;
......
......@@ -15,6 +15,8 @@
#include "join.h"
#include "dev.h"
#define AD_HOC_CAP_PRIVACY_ON 1
/**
* @brief This function finds out the common rates between rate1 and rate2.
*
......@@ -683,15 +685,12 @@ int libertas_cmd_80211_ad_hoc_start(wlan_private * priv,
adhs->probedelay = cpu_to_le16(cmd_scan_probe_delay_time);
/* set up privacy in adapter->scantable[i] */
if (adapter->secinfo.WEPstatus == wlan802_11WEPenabled) {
#define AD_HOC_CAP_PRIVACY_ON 1
lbs_pr_debug(1, "ADHOC_S_CMD: WEPstatus set, privacy to WEP\n");
if (adapter->secinfo.wep_enabled) {
lbs_pr_debug(1, "ADHOC_S_CMD: WEP enabled, setting privacy on\n");
pbssdesc->privacy = wlan802_11privfilter8021xWEP;
adhs->cap.privacy = AD_HOC_CAP_PRIVACY_ON;
} else {
lbs_pr_debug(1, "ADHOC_S_CMD: WEPstatus NOT set, Setting "
"privacy to ACCEPT ALL\n");
lbs_pr_debug(1, "ADHOC_S_CMD: WEP disabled, setting privacy off\n");
pbssdesc->privacy = wlan802_11privfilteracceptall;
}
......@@ -849,7 +848,7 @@ int libertas_cmd_80211_ad_hoc_join(wlan_private * priv,
padhocjoin->bssdescriptor.ssparamset.ibssparamset.atimwindow =
cpu_to_le16(pbssdesc->atimwindow);
if (adapter->secinfo.WEPstatus == wlan802_11WEPenabled) {
if (adapter->secinfo.wep_enabled) {
padhocjoin->bssdescriptor.cap.privacy = AD_HOC_CAP_PRIVACY_ON;
}
......
......@@ -89,7 +89,7 @@ static int is_network_compatible(wlan_adapter * adapter, int index, int mode)
ENTER();
if (adapter->scantable[index].inframode == mode) {
if (adapter->secinfo.WEPstatus == wlan802_11WEPdisabled
if ( !adapter->secinfo.wep_enabled
&& !adapter->secinfo.WPAenabled
&& !adapter->secinfo.WPA2enabled
&& adapter->scantable[index].wpa_ie[0] != WPA_IE
......@@ -98,14 +98,14 @@ static int is_network_compatible(wlan_adapter * adapter, int index, int mode)
/* no security */
LEAVE();
return index;
} else if (adapter->secinfo.WEPstatus == wlan802_11WEPenabled
} else if ( adapter->secinfo.wep_enabled
&& !adapter->secinfo.WPAenabled
&& !adapter->secinfo.WPA2enabled
&& adapter->scantable[index].privacy) {
/* static WEP enabled */
LEAVE();
return index;
} else if (adapter->secinfo.WEPstatus == wlan802_11WEPdisabled
} else if ( !adapter->secinfo.wep_enabled
&& adapter->secinfo.WPAenabled
&& !adapter->secinfo.WPA2enabled
&& (adapter->scantable[index].wpa_ie[0] == WPA_IE)
......@@ -119,14 +119,13 @@ static int is_network_compatible(wlan_adapter * adapter, int index, int mode)
"privacy=%#x\n", index,
adapter->scantable[index].wpa_ie[0],
adapter->scantable[index].rsn_ie[0],
(adapter->secinfo.WEPstatus ==
wlan802_11WEPenabled) ? "e" : "d",
(adapter->secinfo.WPAenabled) ? "e" : "d",
(adapter->secinfo.WPA2enabled) ? "e" : "d",
adapter->secinfo.wep_enabled ? "e" : "d",
adapter->secinfo.WPAenabled ? "e" : "d",
adapter->secinfo.WPA2enabled ? "e" : "d",
adapter->scantable[index].privacy);
LEAVE();
return index;
} else if (adapter->secinfo.WEPstatus == wlan802_11WEPdisabled
} else if ( !adapter->secinfo.wep_enabled
&& !adapter->secinfo.WPAenabled
&& adapter->secinfo.WPA2enabled
&& (adapter->scantable[index].rsn_ie[0] == WPA2_IE)
......@@ -140,14 +139,13 @@ static int is_network_compatible(wlan_adapter * adapter, int index, int mode)
"privacy=%#x\n", index,
adapter->scantable[index].wpa_ie[0],
adapter->scantable[index].rsn_ie[0],
(adapter->secinfo.WEPstatus ==
wlan802_11WEPenabled) ? "e" : "d",
(adapter->secinfo.WPAenabled) ? "e" : "d",
(adapter->secinfo.WPA2enabled) ? "e" : "d",
adapter->secinfo.wep_enabled ? "e" : "d",
adapter->secinfo.WPAenabled ? "e" : "d",
adapter->secinfo.WPA2enabled ? "e" : "d",
adapter->scantable[index].privacy);
LEAVE();
return index;
} else if (adapter->secinfo.WEPstatus == wlan802_11WEPdisabled
} else if ( !adapter->secinfo.wep_enabled
&& !adapter->secinfo.WPAenabled
&& !adapter->secinfo.WPA2enabled
&& (adapter->scantable[index].wpa_ie[0] != WPA_IE)
......@@ -172,9 +170,9 @@ static int is_network_compatible(wlan_adapter * adapter, int index, int mode)
index,
adapter->scantable[index].wpa_ie[0],
adapter->scantable[index].rsn_ie[0],
(adapter->secinfo.WEPstatus == wlan802_11WEPenabled) ? "e" : "d",
(adapter->secinfo.WPAenabled) ? "e" : "d",
(adapter->secinfo.WPA2enabled) ? "e" : "d",
adapter->secinfo.wep_enabled ? "e" : "d",
adapter->secinfo.WPAenabled ? "e" : "d",
adapter->secinfo.WPA2enabled ? "e" : "d",
adapter->scantable[index].privacy);
LEAVE();
return -ECONNREFUSED;
......
......@@ -1556,8 +1556,7 @@ static int wlan_set_freq(struct net_device *dev, struct iw_request_info *info,
/* If station is WEP enabled, send the
* command to set WEP in firmware
*/
if (adapter->secinfo.WEPstatus ==
wlan802_11WEPenabled) {
if (adapter->secinfo.wep_enabled) {
lbs_pr_debug(1, "set_freq: WEP enabled\n");
ret = libertas_prepare_and_send_command(priv,
cmd_802_11_set_wep,
......@@ -1786,8 +1785,9 @@ static int wlan_get_encode(struct net_device *dev,
break;
}
if ((adapter->secinfo.WEPstatus == wlan802_11WEPenabled)
|| adapter->secinfo.WPAenabled || adapter->secinfo.WPA2enabled) {
if ( adapter->secinfo.wep_enabled
|| adapter->secinfo.WPAenabled
|| adapter->secinfo.WPA2enabled) {
dwrq->flags &= ~IW_ENCODE_DISABLED;
} else {
dwrq->flags |= IW_ENCODE_DISABLED;
......@@ -1801,8 +1801,7 @@ static int wlan_get_encode(struct net_device *dev,
if (index < 0)
index = adapter->wep_tx_keyidx;
if ((adapter->wep_keys[index].len) &&
(adapter->secinfo.WEPstatus == wlan802_11WEPenabled)) {
if ((adapter->wep_keys[index].len) && adapter->secinfo.wep_enabled) {
memcpy(extra, adapter->wep_keys[index].key,
adapter->wep_keys[index].len);
dwrq->length = adapter->wep_keys[index].len;
......@@ -1886,7 +1885,7 @@ static int wlan_set_wep_key(struct assoc_request *assoc_req,
assoc_req->wep_tx_keyidx = index;
}
assoc_req->secinfo.WEPstatus = wlan802_11WEPenabled;
assoc_req->secinfo.wep_enabled = 1;
LEAVE();
return 0;
......@@ -1918,7 +1917,7 @@ static void disable_wep(struct assoc_request *assoc_req)
assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
/* Clear WEP keys and mark WEP as disabled */
assoc_req->secinfo.WEPstatus = wlan802_11WEPdisabled;
assoc_req->secinfo.wep_enabled = 0;
for (i = 0; i < 4; i++)
assoc_req->wep_keys[i].len = 0;
......@@ -1970,8 +1969,7 @@ static int wlan_set_encode(struct net_device *dev,
/* If WEP isn't enabled, or if there is no key data but a valid
* index, set the TX key.
*/
if ((assoc_req->secinfo.WEPstatus != wlan802_11WEPenabled)
|| (dwrq->length == 0 && !is_default))
if (!assoc_req->secinfo.wep_enabled || (dwrq->length == 0 && !is_default))
set_tx_key = 1;
ret = wlan_set_wep_key(assoc_req, extra, dwrq->length, index, set_tx_key);
......@@ -2046,23 +2044,24 @@ static int wlan_get_encodeext(struct net_device *dev,
dwrq->flags = index + 1;
memset(ext, 0, sizeof(*ext));
if ((adapter->secinfo.WEPstatus == wlan802_11WEPdisabled)
&& !adapter->secinfo.WPAenabled && !adapter->secinfo.WPA2enabled) {
if ( !adapter->secinfo.wep_enabled
&& !adapter->secinfo.WPAenabled
&& !adapter->secinfo.WPA2enabled) {
ext->alg = IW_ENCODE_ALG_NONE;
ext->key_len = 0;
dwrq->flags |= IW_ENCODE_DISABLED;
} else {
u8 *key = NULL;
if ((adapter->secinfo.WEPstatus == wlan802_11WEPenabled)
if ( adapter->secinfo.wep_enabled
&& !adapter->secinfo.WPAenabled
&& !adapter->secinfo.WPA2enabled) {
ext->alg = IW_ENCODE_ALG_WEP;
ext->key_len = adapter->wep_keys[index].len;
key = &adapter->wep_keys[index].key[0];
} else if ((adapter->secinfo.WEPstatus == wlan802_11WEPdisabled) &&
(adapter->secinfo.WPAenabled ||
adapter->secinfo.WPA2enabled)) {
} else if ( !adapter->secinfo.wep_enabled
&& (adapter->secinfo.WPAenabled ||
adapter->secinfo.WPA2enabled)) {
/* WPA */
ext->alg = IW_ENCODE_ALG_TKIP;
ext->key_len = 0;
......@@ -2132,7 +2131,7 @@ static int wlan_set_encodeext(struct net_device *dev,
/* If WEP isn't enabled, or if there is no key data but a valid
* index, or if the set-TX-key flag was passed, set the TX key.
*/
if ((assoc_req->secinfo.WEPstatus != wlan802_11WEPenabled)
if ( !assoc_req->secinfo.wep_enabled
|| (dwrq->length == 0 && !is_default)
|| (ext->ext_flags & IW_ENCODE_EXT_SET_TX_KEY))
set_tx_key = 1;
......@@ -2331,12 +2330,12 @@ static int wlan_set_auth(struct net_device *dev,
}
if (dwrq->value & IW_AUTH_WPA_VERSION_WPA) {
assoc_req->secinfo.WPAenabled = 1;
assoc_req->secinfo.WEPstatus = wlan802_11WEPdisabled;
assoc_req->secinfo.wep_enabled = 0;
assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
}
if (dwrq->value & IW_AUTH_WPA_VERSION_WPA2) {
assoc_req->secinfo.WPA2enabled = 1;
assoc_req->secinfo.WEPstatus = wlan802_11WEPdisabled;
assoc_req->secinfo.wep_enabled = 0;
assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
}
updated = 1;
......@@ -2372,7 +2371,7 @@ static int wlan_set_auth(struct net_device *dev,
!assoc_req->secinfo.WPA2enabled) {
assoc_req->secinfo.WPAenabled = 1;
assoc_req->secinfo.WPA2enabled = 1;
assoc_req->secinfo.WEPstatus = wlan802_11WEPdisabled;
assoc_req->secinfo.wep_enabled = 0;
assoc_req->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
}
} else {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册