net: qlge: convert to hw_features

Another simple conversion.
Signed-off-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/qlge/qlge_ethtool.c

@@ -655,32 +655,6 @@ static int ql_set_pauseparam(struct net_device *netdev,
 	return status;
 }
 
-static u32 ql_get_rx_csum(struct net_device *netdev)
-{
-	struct ql_adapter *qdev = netdev_priv(netdev);
-	return qdev->rx_csum;
-}
-
-static int ql_set_rx_csum(struct net_device *netdev, uint32_t data)
-{
-	struct ql_adapter *qdev = netdev_priv(netdev);
-	qdev->rx_csum = data;
-	return 0;
-}
-
-static int ql_set_tso(struct net_device *ndev, uint32_t data)
-{
-
-	if (data) {
-		ndev->features |= NETIF_F_TSO;
-		ndev->features |= NETIF_F_TSO6;
-	} else {
-		ndev->features &= ~NETIF_F_TSO;
-		ndev->features &= ~NETIF_F_TSO6;
-	}
-	return 0;
-}
-
 static u32 ql_get_msglevel(struct net_device *ndev)
 {
 	struct ql_adapter *qdev = netdev_priv(ndev);
@@ -707,14 +681,6 @@ const struct ethtool_ops qlge_ethtool_ops = {
 	.self_test		 = ql_self_test,
 	.get_pauseparam		 = ql_get_pauseparam,
 	.set_pauseparam		 = ql_set_pauseparam,
-	.get_rx_csum = ql_get_rx_csum,
-	.set_rx_csum = ql_set_rx_csum,
-	.get_tx_csum = ethtool_op_get_tx_csum,
-	.set_tx_csum = ethtool_op_set_tx_csum,
-	.get_sg = ethtool_op_get_sg,
-	.set_sg = ethtool_op_set_sg,
-	.get_tso = ethtool_op_get_tso,
-	.set_tso = ql_set_tso,
 	.get_coalesce = ql_get_coalesce,
 	.set_coalesce = ql_set_coalesce,
 	.get_sset_count = ql_get_sset_count,

drivers/net/qlge/qlge_main.c

@@ -1571,7 +1571,7 @@ static void ql_process_mac_rx_page(struct ql_adapter *qdev,
 	skb->protocol = eth_type_trans(skb, ndev);
 	skb_checksum_none_assert(skb);
 
-	if (qdev->rx_csum &&
+	if ((ndev->features & NETIF_F_RXCSUM) &&
 		!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
 		/* TCP frame. */
 		if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
@@ -1684,7 +1684,7 @@ static void ql_process_mac_rx_skb(struct ql_adapter *qdev,
 	/* If rx checksum is on, and there are no
 	 * csum or frame errors.
 	 */
-	if (qdev->rx_csum &&
+	if ((ndev->features & NETIF_F_RXCSUM) &&
 		!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
 		/* TCP frame. */
 		if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
@@ -2004,7 +2004,7 @@ static void ql_process_mac_split_rx_intr(struct ql_adapter *qdev,
 	/* If rx checksum is on, and there are no
 	 * csum or frame errors.
 	 */
-	if (qdev->rx_csum &&
+	if ((ndev->features & NETIF_F_RXCSUM) &&
 		!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
 		/* TCP frame. */
 		if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
@@ -4621,7 +4621,6 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 	/*
 	 * Set up the operating parameters.
 	 */
-	qdev->rx_csum = 1;
 	qdev->workqueue = create_singlethread_workqueue(ndev->name);
 	INIT_DELAYED_WORK(&qdev->asic_reset_work, ql_asic_reset_work);
 	INIT_DELAYED_WORK(&qdev->mpi_reset_work, ql_mpi_reset_work);
@@ -4695,15 +4694,11 @@ static int __devinit qlge_probe(struct pci_dev *pdev,
 
 	qdev = netdev_priv(ndev);
 	SET_NETDEV_DEV(ndev, &pdev->dev);
-	ndev->features = (0
-			  | NETIF_F_IP_CSUM
-			  | NETIF_F_SG
-			  | NETIF_F_TSO
-			  | NETIF_F_TSO6
-			  | NETIF_F_TSO_ECN
-			  | NETIF_F_HW_VLAN_TX
-			  | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER);
-	ndev->features |= NETIF_F_GRO;
+	ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
+		NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_TSO_ECN |
+		NETIF_F_HW_VLAN_TX | NETIF_F_RXCSUM;
+	ndev->features = ndev->hw_features |
+		NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER;
 
 	if (test_bit(QL_DMA64, &qdev->flags))
 		ndev->features |= NETIF_F_HIGHDMA;