提交 88202a0c 编写于 作者: N NeilBrown 提交者: Linus Torvalds

[PATCH] md: allow sync-speed to be controlled per-device

Also export current (average) speed and status in sysfs.
Signed-off-by: NNeil Brown <neilb@suse.de>
Acked-by: NGreg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 6d7ff738
......@@ -207,6 +207,28 @@ All md devices contain:
available. It will then appear at md/dev-XXX (depending on the
name of the device) and further configuration is then possible.
sync_speed_min
sync_speed_max
This are similar to /proc/sys/dev/raid/speed_limit_{min,max}
however they only apply to the particular array.
If no value has been written to these, of if the word 'system'
is written, then the system-wide value is used. If a value,
in kibibytes-per-second is written, then it is used.
When the files are read, they show the currently active value
followed by "(local)" or "(system)" depending on whether it is
a locally set or system-wide value.
sync_completed
This shows the number of sectors that have been completed of
whatever the current sync_action is, followed by the number of
sectors in total that could need to be processed. The two
numbers are separated by a '/' thus effectively showing one
value, a fraction of the process that is complete.
sync_speed
This shows the current actual speed, in K/sec, of the current
sync_action. It is averaged over the last 30 seconds.
As component devices are added to an md array, they appear in the 'md'
directory as new directories named
......
......@@ -81,10 +81,22 @@ static DEFINE_SPINLOCK(pers_lock);
* idle IO detection.
*
* you can change it via /proc/sys/dev/raid/speed_limit_min and _max.
* or /sys/block/mdX/md/sync_speed_{min,max}
*/
static int sysctl_speed_limit_min = 1000;
static int sysctl_speed_limit_max = 200000;
static inline int speed_min(mddev_t *mddev)
{
return mddev->sync_speed_min ?
mddev->sync_speed_min : sysctl_speed_limit_min;
}
static inline int speed_max(mddev_t *mddev)
{
return mddev->sync_speed_max ?
mddev->sync_speed_max : sysctl_speed_limit_max;
}
static struct ctl_table_header *raid_table_header;
......@@ -2197,6 +2209,90 @@ md_scan_mode = __ATTR(sync_action, S_IRUGO|S_IWUSR, action_show, action_store);
static struct md_sysfs_entry
md_mismatches = __ATTR_RO(mismatch_cnt);
static ssize_t
sync_min_show(mddev_t *mddev, char *page)
{
return sprintf(page, "%d (%s)\n", speed_min(mddev),
mddev->sync_speed_min ? "local": "system");
}
static ssize_t
sync_min_store(mddev_t *mddev, const char *buf, size_t len)
{
int min;
char *e;
if (strncmp(buf, "system", 6)==0) {
mddev->sync_speed_min = 0;
return len;
}
min = simple_strtoul(buf, &e, 10);
if (buf == e || (*e && *e != '\n') || min <= 0)
return -EINVAL;
mddev->sync_speed_min = min;
return len;
}
static struct md_sysfs_entry md_sync_min =
__ATTR(sync_speed_min, S_IRUGO|S_IWUSR, sync_min_show, sync_min_store);
static ssize_t
sync_max_show(mddev_t *mddev, char *page)
{
return sprintf(page, "%d (%s)\n", speed_max(mddev),
mddev->sync_speed_max ? "local": "system");
}
static ssize_t
sync_max_store(mddev_t *mddev, const char *buf, size_t len)
{
int max;
char *e;
if (strncmp(buf, "system", 6)==0) {
mddev->sync_speed_max = 0;
return len;
}
max = simple_strtoul(buf, &e, 10);
if (buf == e || (*e && *e != '\n') || max <= 0)
return -EINVAL;
mddev->sync_speed_max = max;
return len;
}
static struct md_sysfs_entry md_sync_max =
__ATTR(sync_speed_max, S_IRUGO|S_IWUSR, sync_max_show, sync_max_store);
static ssize_t
sync_speed_show(mddev_t *mddev, char *page)
{
unsigned long resync, dt, db;
resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active));
dt = ((jiffies - mddev->resync_mark) / HZ);
if (!dt) dt++;
db = resync - (mddev->resync_mark_cnt);
return sprintf(page, "%ld\n", db/dt/2); /* K/sec */
}
static struct md_sysfs_entry
md_sync_speed = __ATTR_RO(sync_speed);
static ssize_t
sync_completed_show(mddev_t *mddev, char *page)
{
unsigned long max_blocks, resync;
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery))
max_blocks = mddev->resync_max_sectors;
else
max_blocks = mddev->size << 1;
resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active));
return sprintf(page, "%lu / %lu\n", resync, max_blocks);
}
static struct md_sysfs_entry
md_sync_completed = __ATTR_RO(sync_completed);
static struct attribute *md_default_attrs[] = {
&md_level.attr,
&md_raid_disks.attr,
......@@ -2210,6 +2306,10 @@ static struct attribute *md_default_attrs[] = {
static struct attribute *md_redundancy_attrs[] = {
&md_scan_mode.attr,
&md_mismatches.attr,
&md_sync_min.attr,
&md_sync_max.attr,
&md_sync_speed.attr,
&md_sync_completed.attr,
NULL,
};
static struct attribute_group md_redundancy_group = {
......@@ -4433,10 +4533,10 @@ static void md_do_sync(mddev_t *mddev)
printk(KERN_INFO "md: syncing RAID array %s\n", mdname(mddev));
printk(KERN_INFO "md: minimum _guaranteed_ reconstruction speed:"
" %d KB/sec/disc.\n", sysctl_speed_limit_min);
" %d KB/sec/disc.\n", speed_min(mddev));
printk(KERN_INFO "md: using maximum available idle IO bandwidth "
"(but not more than %d KB/sec) for reconstruction.\n",
sysctl_speed_limit_max);
speed_max(mddev));
is_mddev_idle(mddev); /* this also initializes IO event counters */
/* we don't use the checkpoint if there's a bitmap */
......@@ -4477,7 +4577,7 @@ static void md_do_sync(mddev_t *mddev)
skipped = 0;
sectors = mddev->pers->sync_request(mddev, j, &skipped,
currspeed < sysctl_speed_limit_min);
currspeed < speed_min(mddev));
if (sectors == 0) {
set_bit(MD_RECOVERY_ERR, &mddev->recovery);
goto out;
......@@ -4542,8 +4642,8 @@ static void md_do_sync(mddev_t *mddev)
currspeed = ((unsigned long)(io_sectors-mddev->resync_mark_cnt))/2
/((jiffies-mddev->resync_mark)/HZ +1) +1;
if (currspeed > sysctl_speed_limit_min) {
if ((currspeed > sysctl_speed_limit_max) ||
if (currspeed > speed_min(mddev)) {
if ((currspeed > speed_max(mddev)) ||
!is_mddev_idle(mddev)) {
msleep(500);
goto repeat;
......
......@@ -143,6 +143,10 @@ struct mddev_s
sector_t resync_mismatches; /* count of sectors where
* parity/replica mismatch found
*/
/* if zero, use the system-wide default */
int sync_speed_min;
int sync_speed_max;
int ok_start_degraded;
/* recovery/resync flags
* NEEDED: we might need to start a resync/recover
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册