提交 881abc9d 编写于 作者: B Bartlomiej Zolnierkiewicz 提交者: Greg Kroah-Hartman

Staging: rtxxx0: remove private ioctls

Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
上级 a59601e4
......@@ -92,136 +92,31 @@
//
#define OID_GET_SET_TOGGLE 0x8000
#define OID_802_11_NETWORK_TYPES_SUPPORTED 0x0103
#define OID_802_11_NETWORK_TYPE_IN_USE 0x0104
#define OID_802_11_RSSI_TRIGGER 0x0107
#define RT_OID_802_11_RSSI 0x0108 //rt2860 only , kathy
#define RT_OID_802_11_RSSI_1 0x0109 //rt2860 only , kathy
#define RT_OID_802_11_RSSI_2 0x010A //rt2860 only , kathy
#define OID_802_11_NUMBER_OF_ANTENNAS 0x010B
#define OID_802_11_RX_ANTENNA_SELECTED 0x010C
#define OID_802_11_TX_ANTENNA_SELECTED 0x010D
#define OID_802_11_SUPPORTED_RATES 0x010E
#define OID_802_11_ADD_WEP 0x0112
#define OID_802_11_REMOVE_WEP 0x0113
#define OID_802_11_DISASSOCIATE 0x0114
#define OID_802_11_PRIVACY_FILTER 0x0118
#define OID_802_11_ASSOCIATION_INFORMATION 0x011E
#define OID_802_11_TEST 0x011F
#define RT_OID_802_11_COUNTRY_REGION 0x0507
#define OID_802_11_BSSID_LIST_SCAN 0x0508
#define OID_802_11_SSID 0x0509
#define OID_802_11_BSSID 0x050A
#define RT_OID_802_11_RADIO 0x050B
#define RT_OID_802_11_PHY_MODE 0x050C
#define RT_OID_802_11_STA_CONFIG 0x050D
#define OID_802_11_DESIRED_RATES 0x050E
#define RT_OID_802_11_PREAMBLE 0x050F
#define OID_802_11_WEP_STATUS 0x0510
#define OID_802_11_AUTHENTICATION_MODE 0x0511
#define OID_802_11_INFRASTRUCTURE_MODE 0x0512
#define RT_OID_802_11_RESET_COUNTERS 0x0513
#define OID_802_11_RTS_THRESHOLD 0x0514
#define OID_802_11_FRAGMENTATION_THRESHOLD 0x0515
#define OID_802_11_POWER_MODE 0x0516
#define OID_802_11_TX_POWER_LEVEL 0x0517
#define RT_OID_802_11_ADD_WPA 0x0518
#define OID_802_11_REMOVE_KEY 0x0519
#define OID_802_11_ADD_KEY 0x0520
#define OID_802_11_CONFIGURATION 0x0521
#define OID_802_11_TX_PACKET_BURST 0x0522
#define RT_OID_802_11_QUERY_NOISE_LEVEL 0x0523
#define RT_OID_802_11_EXTRA_INFO 0x0524
#ifdef DBG
#define RT_OID_802_11_HARDWARE_REGISTER 0x0525
#endif
#define OID_802_11_ENCRYPTION_STATUS OID_802_11_WEP_STATUS
#define OID_802_11_DEAUTHENTICATION 0x0526
#define OID_802_11_DROP_UNENCRYPTED 0x0527
#define OID_802_11_MIC_FAILURE_REPORT_FRAME 0x0528
// For 802.1x daemin using to require current driver configuration
#define OID_802_11_RADIUS_QUERY_SETTING 0x0540
#define OID_802_11_ADD_WEP 0x0112
#define OID_802_11_DISASSOCIATE 0x0114
#define OID_802_11_BSSID_LIST_SCAN 0x0508
#define OID_802_11_SSID 0x0509
#define OID_802_11_BSSID 0x050A
#define OID_802_11_MIC_FAILURE_REPORT_FRAME 0x0528
#define RT_OID_DEVICE_NAME 0x0607
#define RT_OID_VERSION_INFO 0x0608
#define OID_802_11_BSSID_LIST 0x0609
#define OID_802_3_CURRENT_ADDRESS 0x060A
#define OID_GEN_MEDIA_CONNECT_STATUS 0x060B
#define RT_OID_802_11_QUERY_LINK_STATUS 0x060C
#define OID_802_11_RSSI 0x060D
#define OID_802_11_STATISTICS 0x060E
#define OID_GEN_RCV_OK 0x060F
#define OID_GEN_RCV_NO_BUFFER 0x0610
#define RT_OID_802_11_QUERY_EEPROM_VERSION 0x0611
#define RT_OID_802_11_QUERY_FIRMWARE_VERSION 0x0612
#define RT_OID_802_11_QUERY_LAST_RX_RATE 0x0613
#define RT_OID_802_11_TX_POWER_LEVEL_1 0x0614
#define RT_OID_802_11_QUERY_PIDVID 0x0615
#define OID_SET_COUNTERMEASURES 0x0616
#define OID_802_11_SET_IEEE8021X 0x0617
#define OID_802_11_SET_IEEE8021X_REQUIRE_KEY 0x0618
#define OID_802_11_PMKID 0x0620
#define RT_OID_WPA_SUPPLICANT_SUPPORT 0x0621
#define RT_OID_WE_VERSION_COMPILED 0x0622
#define RT_OID_NEW_DRIVER 0x0623
//rt2860 , kathy
#define RT_OID_802_11_SNR_0 0x0630
#define RT_OID_802_11_SNR_1 0x0631
#define RT_OID_802_11_QUERY_LAST_TX_RATE 0x0632
#define RT_OID_802_11_QUERY_HT_PHYMODE 0x0633
#define RT_OID_802_11_SET_HT_PHYMODE 0x0634
#define OID_802_11_RELOAD_DEFAULTS 0x0635
#define RT_OID_802_11_QUERY_APSD_SETTING 0x0636
#define RT_OID_802_11_SET_APSD_SETTING 0x0637
#define RT_OID_802_11_QUERY_APSD_PSM 0x0638
#define RT_OID_802_11_SET_APSD_PSM 0x0639
#define RT_OID_802_11_QUERY_DLS 0x063A
#define RT_OID_802_11_SET_DLS 0x063B
#define RT_OID_802_11_QUERY_DLS_PARAM 0x063C
#define RT_OID_802_11_SET_DLS_PARAM 0x063D
#define RT_OID_802_11_QUERY_WMM 0x063E
#define RT_OID_802_11_SET_WMM 0x063F
#define RT_OID_802_11_QUERY_IMME_BA_CAP 0x0640
#define RT_OID_802_11_SET_IMME_BA_CAP 0x0641
#define RT_OID_802_11_QUERY_BATABLE 0x0642
#define RT_OID_802_11_ADD_IMME_BA 0x0643
#define RT_OID_802_11_TEAR_IMME_BA 0x0644
#define RT_OID_DRIVER_DEVICE_NAME 0x0645
#define RT_OID_802_11_QUERY_DAT_HT_PHYMODE 0x0646
#define RT_OID_QUERY_MULTIPLE_CARD_SUPPORT 0x0647
// Ralink defined OIDs
// Dennis Lee move to platform specific
#define RT_OID_802_11_BSSID (OID_GET_SET_TOGGLE | OID_802_11_BSSID)
#define RT_OID_802_11_SSID (OID_GET_SET_TOGGLE | OID_802_11_SSID)
#define RT_OID_802_11_INFRASTRUCTURE_MODE (OID_GET_SET_TOGGLE | OID_802_11_INFRASTRUCTURE_MODE)
#define RT_OID_802_11_ADD_WEP (OID_GET_SET_TOGGLE | OID_802_11_ADD_WEP)
#define RT_OID_802_11_ADD_KEY (OID_GET_SET_TOGGLE | OID_802_11_ADD_KEY)
#define RT_OID_802_11_REMOVE_WEP (OID_GET_SET_TOGGLE | OID_802_11_REMOVE_WEP)
#define RT_OID_802_11_REMOVE_KEY (OID_GET_SET_TOGGLE | OID_802_11_REMOVE_KEY)
#define RT_OID_802_11_DISASSOCIATE (OID_GET_SET_TOGGLE | OID_802_11_DISASSOCIATE)
#define RT_OID_802_11_AUTHENTICATION_MODE (OID_GET_SET_TOGGLE | OID_802_11_AUTHENTICATION_MODE)
#define RT_OID_802_11_PRIVACY_FILTER (OID_GET_SET_TOGGLE | OID_802_11_PRIVACY_FILTER)
#define RT_OID_802_11_BSSID_LIST_SCAN (OID_GET_SET_TOGGLE | OID_802_11_BSSID_LIST_SCAN)
#define RT_OID_802_11_WEP_STATUS (OID_GET_SET_TOGGLE | OID_802_11_WEP_STATUS)
#define RT_OID_802_11_RELOAD_DEFAULTS (OID_GET_SET_TOGGLE | OID_802_11_RELOAD_DEFAULTS)
#define RT_OID_802_11_NETWORK_TYPE_IN_USE (OID_GET_SET_TOGGLE | OID_802_11_NETWORK_TYPE_IN_USE)
#define RT_OID_802_11_TX_POWER_LEVEL (OID_GET_SET_TOGGLE | OID_802_11_TX_POWER_LEVEL)
#define RT_OID_802_11_RSSI_TRIGGER (OID_GET_SET_TOGGLE | OID_802_11_RSSI_TRIGGER)
#define RT_OID_802_11_FRAGMENTATION_THRESHOLD (OID_GET_SET_TOGGLE | OID_802_11_FRAGMENTATION_THRESHOLD)
#define RT_OID_802_11_RTS_THRESHOLD (OID_GET_SET_TOGGLE | OID_802_11_RTS_THRESHOLD)
#define RT_OID_802_11_RX_ANTENNA_SELECTED (OID_GET_SET_TOGGLE | OID_802_11_RX_ANTENNA_SELECTED)
#define RT_OID_802_11_TX_ANTENNA_SELECTED (OID_GET_SET_TOGGLE | OID_802_11_TX_ANTENNA_SELECTED)
#define RT_OID_802_11_SUPPORTED_RATES (OID_GET_SET_TOGGLE | OID_802_11_SUPPORTED_RATES)
#define RT_OID_802_11_DESIRED_RATES (OID_GET_SET_TOGGLE | OID_802_11_DESIRED_RATES)
#define RT_OID_802_11_CONFIGURATION (OID_GET_SET_TOGGLE | OID_802_11_CONFIGURATION)
#define RT_OID_802_11_POWER_MODE (OID_GET_SET_TOGGLE | OID_802_11_POWER_MODE)
typedef enum _NDIS_802_11_STATUS_TYPE
{
Ndis802_11StatusType_Authentication,
......@@ -652,11 +547,6 @@ enum {
#endif
};
#define OID_802_11_BUILD_CHANNEL_EX 0x0714
#define OID_802_11_GET_CH_LIST 0x0715
#define OID_802_11_GET_COUNTRY_CODE 0x0716
#define OID_802_11_GET_CHANNEL_GEOGRAPHY 0x0717
#ifdef LLTD_SUPPORT
// for consistency with RT61
#define RT_OID_GET_PHY_MODE 0x761
......
此差异已折叠。
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册