提交 879d5ad0 编写于 作者: D Dimitri Sivanich 提交者: Ingo Molnar

x86/UV: Add GRU distributed mode mappings

GRU hardware will support an optional distributed mode that will
allow  per-node address mapping of local GRU space, as opposed
to mapping all GRU hardware to the same contiguous high space.

If GRU distributed mode is selected, setup per-node page table
mappings.
Signed-off-by: NDimitri Sivanich <sivanich@sgi.com>
Cc: Alexander Gordeev <agordeev@redhat.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Mike Travis <travis@sgi.com>
Link: http://lkml.kernel.org/r/20130529155609.GB22917@sgi.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
上级 dcdbe33a
......@@ -51,6 +51,8 @@ DEFINE_PER_CPU(int, x2apic_extra_bits);
static enum uv_system_type uv_system_type;
static u64 gru_start_paddr, gru_end_paddr;
static u64 gru_dist_base, gru_first_node_paddr = -1LL, gru_last_node_paddr;
static u64 gru_dist_lmask, gru_dist_umask;
static union uvh_apicid uvh_apicid;
int uv_min_hub_revision_id;
EXPORT_SYMBOL_GPL(uv_min_hub_revision_id);
......@@ -72,7 +74,20 @@ static unsigned long __init uv_early_read_mmr(unsigned long addr)
static inline bool is_GRU_range(u64 start, u64 end)
{
return start >= gru_start_paddr && end <= gru_end_paddr;
if (gru_dist_base) {
u64 su = start & gru_dist_umask; /* upper (incl pnode) bits */
u64 sl = start & gru_dist_lmask; /* base offset bits */
u64 eu = end & gru_dist_umask;
u64 el = end & gru_dist_lmask;
/* Must reside completely within a single GRU range */
return (sl == gru_dist_base && el == gru_dist_base &&
su >= gru_first_node_paddr &&
su <= gru_last_node_paddr &&
eu == su);
} else {
return start >= gru_start_paddr && end <= gru_end_paddr;
}
}
static bool uv_is_untracked_pat_range(u64 start, u64 end)
......@@ -463,26 +478,63 @@ static __init void map_high(char *id, unsigned long base, int pshift,
pr_info("UV: Map %s_HI base address NULL\n", id);
return;
}
pr_info("UV: Map %s_HI 0x%lx - 0x%lx\n", id, paddr, paddr + bytes);
pr_debug("UV: Map %s_HI 0x%lx - 0x%lx\n", id, paddr, paddr + bytes);
if (map_type == map_uc)
init_extra_mapping_uc(paddr, bytes);
else
init_extra_mapping_wb(paddr, bytes);
}
static __init void map_gru_distributed(unsigned long c)
{
union uvh_rh_gam_gru_overlay_config_mmr_u gru;
u64 paddr;
unsigned long bytes;
int nid;
gru.v = c;
/* only base bits 42:28 relevant in dist mode */
gru_dist_base = gru.v & 0x000007fff0000000UL;
if (!gru_dist_base) {
pr_info("UV: Map GRU_DIST base address NULL\n");
return;
}
bytes = 1UL << UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT;
gru_dist_lmask = ((1UL << uv_hub_info->m_val) - 1) & ~(bytes - 1);
gru_dist_umask = ~((1UL << uv_hub_info->m_val) - 1);
gru_dist_base &= gru_dist_lmask; /* Clear bits above M */
for_each_online_node(nid) {
paddr = ((u64)uv_node_to_pnode(nid) << uv_hub_info->m_val) |
gru_dist_base;
init_extra_mapping_wb(paddr, bytes);
gru_first_node_paddr = min(paddr, gru_first_node_paddr);
gru_last_node_paddr = max(paddr, gru_last_node_paddr);
}
/* Save upper (63:M) bits of address only for is_GRU_range */
gru_first_node_paddr &= gru_dist_umask;
gru_last_node_paddr &= gru_dist_umask;
pr_debug("UV: Map GRU_DIST base 0x%016llx 0x%016llx - 0x%016llx\n",
gru_dist_base, gru_first_node_paddr, gru_last_node_paddr);
}
static __init void map_gru_high(int max_pnode)
{
union uvh_rh_gam_gru_overlay_config_mmr_u gru;
int shift = UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT;
gru.v = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR);
if (gru.s.enable) {
map_high("GRU", gru.s.base, shift, shift, max_pnode, map_wb);
gru_start_paddr = ((u64)gru.s.base << shift);
gru_end_paddr = gru_start_paddr + (1UL << shift) * (max_pnode + 1);
} else {
if (!gru.s.enable) {
pr_info("UV: GRU disabled\n");
return;
}
if (is_uv3_hub() && gru.s3.mode) {
map_gru_distributed(gru.v);
return;
}
map_high("GRU", gru.s.base, shift, shift, max_pnode, map_wb);
gru_start_paddr = ((u64)gru.s.base << shift);
gru_end_paddr = gru_start_paddr + (1UL << shift) * (max_pnode + 1);
}
static __init void map_mmr_high(int max_pnode)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册