提交 86c7d03a 编写于 作者: M Magnus Damm 提交者: Paul Mundt

sh: Add ap325rxa specific memory pre/post sleep code

Add self-refresh handling code for the AP325RXA board.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 53528928
obj-y := setup.o
obj-y := setup.o sdram.o
/*
* AP325RXA sdram self/auto-refresh setup code
*
* Copyright (C) 2009 Magnus Damm
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/sys.h>
#include <linux/errno.h>
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/suspend.h>
#include <asm/romimage-macros.h>
/* code to enter and leave self-refresh. must be self-contained.
* this code will be copied to on-chip memory and executed from there.
*/
.balign 4
ENTRY(ap325rxa_sdram_enter_start)
/* SBSC: disable power down and put in self-refresh mode */
mov.l 1f, r4
mov.l 2f, r1
mov.l @r4, r2
or r1, r2
mov.l 3f, r3
and r3, r2
mov.l r2, @r4
rts
nop
.balign 4
1: .long 0xfe400008 /* SDCR0 */
2: .long 0x00000400
3: .long 0xffff7fff
ENTRY(ap325rxa_sdram_enter_end)
.balign 4
ENTRY(ap325rxa_sdram_leave_start)
/* SBSC: set auto-refresh mode */
mov.l 1f, r4
mov.l @r4, r0
mov.l 4f, r1
and r1, r0
mov.l r0, @r4
mov.l 6f, r4
mov.l 8f, r0
mov.l @r4, r1
mov #-1, r4
add r4, r1
or r1, r0
mov.l 7f, r1
mov.l r0, @r1
rts
nop
.balign 4
1: .long 0xfe400008 /* SDCR0 */
4: .long 0xfffffbff
6: .long 0xfe40001c /* RTCOR */
7: .long 0xfe400018 /* RTCNT */
8: .long 0xa55a0000
ENTRY(ap325rxa_sdram_leave_end)
......@@ -27,6 +27,7 @@
#include <video/sh_mobile_lcdc.h>
#include <asm/io.h>
#include <asm/clock.h>
#include <asm/suspend.h>
#include <cpu/sh7723.h>
static struct smsc911x_platform_config smsc911x_config = {
......@@ -481,8 +482,20 @@ static struct platform_device *ap325rxa_devices[] __initdata = {
&ap325rxa_camera[1],
};
extern char ap325rxa_sdram_enter_start;
extern char ap325rxa_sdram_enter_end;
extern char ap325rxa_sdram_leave_start;
extern char ap325rxa_sdram_leave_end;
static int __init ap325rxa_devices_setup(void)
{
/* register board specific self-refresh code */
sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
&ap325rxa_sdram_enter_start,
&ap325rxa_sdram_enter_end,
&ap325rxa_sdram_leave_start,
&ap325rxa_sdram_leave_end);
/* LD3 and LD4 LEDs */
gpio_request(GPIO_PTX5, NULL); /* RUN */
gpio_direction_output(GPIO_PTX5, 1);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册